Solar photovoltaic assistance for LHB rail coaches

Awareness for the need of sustainable and eco-friendly mobility has been increasing and various innovations are taking place in this regard. A study was carried out to assess the feasibility of installing solar photovoltaic (PV) modules atop train coaches. Most long-distance trains having LHB coaches do not have self-generating systems, thus making power cars mandatory to supply the required power for lighting loads. Feasibility of supplementing diesel generator sets with power from solar PV modules installed on coach rooftops has been reported in this communication. Not only is there a conservation of fuel, there is also a significant reduction in CO2 emissions. This work has shown that the area available on coach rooftops is more than sufficient to generate the required power, during sunlight hours, for the electrical loads of a non-A/C coach even during winter. All calculations were done keeping a standard route as the reference. Taking the cost of diesel to be Rs 66/litre, it was estimated that there will be annual savings of Rs 5,900,000 corresponding to 90,800 litres diesel per rake per year by implementing this scheme. The installation cost of solar modules would be recovered within 2-3 years. Implementation of this scheme would also amount to an annual reduction of 239 tonnes of CO2 emissions.

Enzymatically degradable EMI shielding materials derived from PCL based nanocomposites

In this study, two different types of multiwall carbon nanotubes (MWNTs) namely pristine (p-MWNTs) and amine functionalized (a-MWNTs) were melt-mixed with polycaprolactone (PCL) to develop biodegradable electromagnetic interference (EMI) shielding materials. The bulk electrical conductivity of the nanocomposites was assessed using broadband dielectric spectroscopy and the structural properties were evaluated using dynamic mechanical thermal analysis (DMTA). Both the electrical conductivity and the structural properties improved after the addition of MWNTs and were observed to be proportional to the increasing fractions in the nanocomposites. The shielding effectiveness of the nanocomposites was studied using a vector network analyzer (VNA) in a broad range of frequencies, X-band (8 to 12 GHz) and K-u-band (12 to 18 GHz) on toroidal samples. The shielding effectiveness significantly improved on addition of MWNTs, more in the case of p-MWNTs than in a-MWNTs. For instance, at a given fraction of MWNTs (3 wt%), PCL with p-MWNTs and a-MWNTs showed a shielding effectiveness of -32 dB and -29 dB, respectively. Moreover, it was observed that reflection was the primary mechanism of shielding at lower fractions of MWNTs, while absorption dominated at higher fractions in the composites. As one of the rationales of this work was to develop biodegradable EMI shielding materials to address the challenges concerning electronic waste, the effect of different MWNTs on the biodegradability of PCL composites was assessed through enzymatic degradation. The enzymatic degradation of the samples cut from the hot pressed films by bacterial lipase was investigated. It was noted that a-MWNTs exhibited almost similar degradation rate as the control PCL sample; however, p-MWNTs showed a slower degradation rate. This study demonstrates the potential use of PCL-MWNT composites as flexible, light weight and eco-friendly EMI shielding materials.

Electrochemical exfoliation of graphite to produce graphene using tetrasodium pyrophosphate

An electrochemical exfoliation based synthetic methodology to produce graphene is provided. An eco-friendly and non-toxic tetrasodium pyrophosphate solution in which the pyrophosphate anion acts as an intercalating ion was used as the electroactive media. Five different ion intercalation potentials were used. Characterization by microscopy, X-ray diffraction, Raman spectroscopy and UV-Visible spectroscopic techniques confirmed that all the potentials produced nano to micrometer sized graphene sheets. No trace of graphene oxide was detected. It was observed that (i) an increase in the intercalation potential increased the graphene yield and (ii) the defect density of graphene did not change significantly with a change in the intercalation potential.

Sulfate Chemistry for High-Voltage Insertion Materials: Synthetic, Structural and Electrochemical Insights

Rechargeable batteries based on Li and Na ions have been growing leaps and bounds since their inception in the 1970s. They enjoy significant attention from both the fundamental science point of view and practical applications ranging from portable electronics to hybrid vehicles and grid storage. The steady demand for building better batteries calls for discovery, optimisation and implementation of novel positive insertion (cathode) materials. In this quest, chemists have tried to unravel many future cathode materials by taking into consideration their eco-friendly synthesis, material/process economy, high energy density, safety, easy handling and sustainability. Interestingly, sulfate-based cathodes offer a good combination of sustainable syntheses and high energy density owing to their high-voltage operation, stemming from electronegative SO42- units. This review delivers a sneak peak at the recent advances in the discovery and development of sulfate-containing cathode materials by focusing on their synthesis, crystal structure and electrochemical performance. Several family of cathodes are independently discussed. They are 1) fluorosulfates AMSO(4)F], 2) bihydrated fluorosulfates AMSO(4)F2H(2)O], 3) hydroxysulfate AMSO(4)OH], 4) bisulfates A(2)M(SO4)(2)], 5) hydrated bisulfates A(2)M(SO4)(2)nH(2)O], 6) oxysulfates Fe-2(SO4)(2)O] and 7) polysulfates A(2)M(2)(SO4)(3)]. A comparative study of these sulfate-based cathodes has been provided to offer an outlook on the future development of high-voltage polyanionic cathode materials for next-generation batteries.

FRP-Confined Clay Brick Masonry Assemblages under Axial Compression: Experimental and Analytical Investigations

Unreinforced masonry (URM) structures that are in need of repair and rehabilitation constitute a significant portion of building stock worldwide. The successful application of fiber-reinforced polymers (FRP) for repair and retrofitting of reinforced-concrete (RC) structures has opened new avenues for strengthening URM structures with FRP materials. The present study analyzes the behavior of FRP-confined masonry prisms under monotonic axial compression. Masonry comprising of burnt clay bricks and cement-sand mortar (generally adopted in the Indian subcontinent) having E-b/E-m ratio less than one is employed in the study. The parameters considered in the study are, (1) masonry bonding pattern, (2) inclination of loading axis to the bed joint, (3) type of FRP (carbon FRP or glass FRP), and (4) grade of FRP fabric. The performance of FRP-confined masonry prisms is compared with unconfined masonry prisms in terms of compressive strength, modulus of elasticity and stress-strain response. The results showed an enhancement in compressive strength, modulus of elasticity, strain at peak stress, and ultimate strain for FRP-confined masonry prisms. The FRP confinement of masonry resulted in reducing the influence of the inclination of the loading axis to the bed joint on the compressive strength and failure pattern. Various analytical models available in the literature for the prediction of compressive strength of FRP-confined masonry are assessed. New coefficients are generated for the analytical model by appending experimental results of the current study with data available in the literature. (C) 2014 American Society of Civil Engineers.

Bio-inspired route for the synthesis of spherical shaped MgO:Fe3+ nanoparticles: Structural, photoluminescence and photocatalytic investigation

MgO:Fe3+ (0.1-5 mol%) nanoparticles (NPs) were synthesized via eco-friendly, inexpensive and simple low temperature solution combustion route using Aloe vera gel as fuel. The final products were characterized by SEM, TEM and HRTEM. PXRD data and Rietveld analysis revealed the formation of cubic system. The influence of Fe3+ ion concentration on the structure morphology, UV absorption, PL emission and photocatalytic activity of MgO:Fe3+ NPs were investigated. The yellow emission with CIE chromaticity coordinates (0.44, 0.52) and average correlated color temperature value was found to be 3540 K which corresponds to warm light of NPs. The control of Fe3+. on MgO matrix influences the photocatalytic decolorization of methylene blue (MB) under UV light. The enhanced photocatalytic activity of MgO:Fe3+ (4 mol%) was attributed to dopant concentration, effective crystallite size, textural properties, decreased band gap and capability for reducing the electron hole pair recombination. Further, the trends of inhibitory effect in the presence of different radical scavengers were explored. These findings open up new avenues for the exploration of Fe-doped MgO in eco-friendly water applications and in the process of display devices. (C) 2015 Elsevier B.V. All rights reserved.

Primates, Provisioning and Plants: Impacts of Human Cultural Behaviours on Primate Ecological Functions

Human provisioning of wildlife with food is a widespread global practice that occurs in multiple socio-cultural circumstances. Provisioning may indirectly alter ecosystem functioning through changes in the eco-ethology of animals, but few studies have quantified this aspect. Provisioning of primates by humans is known to impact their activity budgets, diets and ranging patterns. Primates are also keystone species in tropical forests through their role as seed dispersers; yet there is no information on how provisioning might affect primate ecological functions. The rhesus macaque is a major human-commensal species but is also an important seed disperser in the wild. In this study, we investigated the potential impacts of provisioning on the role of rhesus macaques as seed dispersers in the Buxa Tiger Reserve, India. We studied a troop of macaques which were provisioned for a part of the year and were dependent on natural resources for the rest. We observed feeding behaviour, seed handling techniques and ranging patterns of the macaques and monitored availability of wild fruits. Irrespective of fruit availability, frugivory and seed dispersal activities decreased when the macaques were provisioned. Provisioned macaques also had shortened daily ranges implying shorter dispersal distances. Finally, during provisioning periods, seeds were deposited on tarmac roads that were unconducive for germination. Provisioning promotes human-primate conflict, as commensal primates are often involved in aggressive encounters with humans over resources, leading to negative consequences for both parties involved. Preventing or curbing provisioning is not an easy task as feeding wild animals is a socio-cultural tradition across much of South and South-East Asia, including India. We recommend the initiation of literacy programmes that educate lay citizens about the ill-effects of provisioning and strongly caution them against the practice.

Hetero-atom Doped Carbon Nanotubes for Dye Degradation and Oxygen Reduction Reaction

We report the synthesis of nitrogen doped vertically aligned multi-walled (MWNCNTs) carbon nanotubes by pyrolysis and its catalytic performance for degradation of methylene blue (MB) dye & oxygen reduction reaction (ORR). The degradation of MB was monitored spectrophotometrically with time. Kinetic studies show the degradation of MB follows a first order kinetic with rate constant k=0.0178 min(-1). The present rate constant is better than that reported for various supported/non-supported semiconducting nanomaterials. Further ORR performance in alkaline media makes MWNCNTs a promising cost-effective, fuel crossover tolerance, metal-free, eco-friendly cathode catalyst for direct alcohol fuel cell.

Physiological role of FolD (methylenetetrahydrofolate dehydrogenase), FchA (methenyltetrahydrofolate cyclohydrolase) and Fhs (formyltetrahydrofolate synthetase) from Clostridium perfringens in a heterologous model of Escherichia coli

Most organisms possess bifunctional FolD 5,10-methylenetetrahydrofolate (5,10-CH2-THF) dehydrogenase-cyclohydrolase] to generate NADPH and 10-formyltetrandrofolate (10-CHO-THF) required in various metabolic steps. In addition, some organisms including Clostridium perfringens possess another protein, Fhs (formyltetrahydrofolate synthetase), to synthesize 10-CHO-THF. Here, we show that unlike the bifunctional FolD of Escherichia coli (Eco FolD), and contrary to its annotated bifunctional nature, C. perfringens FolD (Cpe FoID) is a monofunctional 5,10-CH2-THF dehydrogenase. The dehydrogenase activity of Cpe FoID is about five times more efficient than that of Eco FolD. The 5,10-methenyltetrahydrofolate (5,10-CH+-THF) cyclohydrolase activity in C. perfringens is provided by another protein, FchA (5,10-CH+-THF cyclohydrolase), whose cyclohydrolase activity is similar to 10 times more efficient than that of Eco FolD. Kinetic parameters for Cpe Fhs were also determined for utilization of all of its substrates. Both Cpe FoID and Cpe FchA are required to substitute for the single bifunctional FolD in E. coli. The simultaneous presence of Cpe FoID and Cpe FchA is also necessary to rescue an E coli folD deletion strain (harbouring Cpe Fhs support) for its formate and glycine auxotrophies, and to alleviate its susceptibility to trimethoprim (an antifolate drug) or UV light. The presence of the three clostridial proteins (FolD, FchA and Fhs) is required to maintain folate homeostasis in the cell.

Combustion and heat transfer characteristics of nanofluid fuel droplets: A short review

With the pressing need to meet an ever-increasing energy demand, the combustion systems utilizing fossil fuels have been the major contributors to carbon footprint. As the combustion of conventional energy resources continue to produce significant Green House gas (GHG) emissions, there is a strong emphasis to either upgrade or find an energy-efficient eco-friendly alternative to the traditional hydrocarbon fuels. With recent developments in nanotechnology, the ability to manufacture materials with custom tailored properties at nanoscale has led to the discovery of a new class of high energy density fuels containing reactive metallic nanoparticles (NPs). Due to the high reactive interfacial area and enhanced thermal and mass transport properties of nanomaterials, the high heat of formation of these metallic fuels can now be released rapidly, thereby saving on specific fuel consumption and hence reducing GHG emissions. In order to examine the efficacy of nanofuels in energetic formulations, it is imperative to first study their combustion characteristics at the droplet scale that form the fundamental building block for any combustion system utilizing liquid fuel spray. During combustion of such multiphase, multicomponent droplets, the phenomenon of diffusional entrapment of high volatility species leads to its explosive boiling (at the superheat limit) thereby leading to an intense internal pressure build-up. This pressure upsurge causes droplet fragmentation either in form of a microexplosion or droplet puffing followed by atomization (with formation of daughter droplets) featuring disruptive burning. Both these atomization modes represent primary mechanisms for extracting the high oxidation energies of metal NP additives by exposing them to the droplet flame (with daughter droplets acting as carriers of NPs). Atomization also serves as a natural mechanism for uniform distribution and mixing of the base fuel and enhancing burning rates (due to increase in specific surface area through formation of smaller daughter droplets). However, the efficiency of atomization depends on the thermo-physical properties of the base fuel, NP concentration and type. For instance, at dense loading NP agglomeration may lead to shell formation which would sustain the pressure upsurge and hence suppress atomization thereby reducing droplet gasification rate. Contrarily, the NPs may act as nucleation sites and aid boiling and the radiation absorption by NPs (from the flame) may lead to enhanced burning rates. Thus, nanoadditives may have opposing effects on the burning rate depending on the relative dominance of processes occurring at the droplet scale. The fundamental idea in this study is to: First, review different thermo-physical processes that occur globally at the droplet and sub-droplet scale such as surface regression, shell formation due to NP agglomeration, internal boiling, atomization/NP transport to flame zone and flame acoustic interaction that occur at the droplet scale and second, understand how their interaction changes as a function of droplet size, NP type, NP concentration and the type of base fuel. This understanding is crucial for obtaining phenomenological insights on the combustion behavior of novel nanofluid fuels that show great promise for becoming the next-generation fuels. (C) 2016 Elsevier Ltd. All rights reserved.

Burning Low Volatile Fuel in Tangentially Fired Furnaces with Fuel Rich/Lean Burners

Pulverized coal combustion in tangentially fired furnaces with fuel rich/lean burners was investigated for three low volatile coals. The burners were operated under the conditions with varied value N-d, which means the ratio of coal concentration of the fuel rich stream to that of the fuel lean stream. The wall temperature distributions in various positions were measured and analyzed. The carbon content in the char and Nox emission were detected under various conditions. The new burners with fuel rich/lean streams were utilized in a thermal power station to burn low volatile coal. The results show that the N-d value has significant influences on the distributions of temperature and char burnout. There exists an optimal N-d value under which the carbon content in the char and the Nox emission is relatively low. The coal ignition and Nox emission in the utilized power station are improved after retrofitting the burners.

Efecto de la combinación de árboles de sombra con manejo orgánico y manejo convencional sobre el banco de semillas de malezas en café (Coffea arabica L.), Masatepe, Masaya 2009

En búsqueda de métodos más eficientes, rentables y eco amigables para el control de malezas dentro de plantaciones de café agroforestal, se estableció un experimento en diseño de Parcelas Divididas con distribución en Bloques Completamente al Azar (BCA), con tres repeticiones. En las parcelas grandes fueron distribuidos los niveles del factor A: Tipo de sombra (a1: Inga laurina + Simarouba glauca; a2: Inga laurina + Samanea saman; a3: Tabebuina rosea + Samanea saman; a4: Tabebuina rosea + Simarouba glauca; a5: café a plena exposición solar). En las sub parcelas fueron distribuidos los niveles del factor B: niveles de insumos (corresponden al uso de diferentes dosis fertilizantes sintéticos, herbicidas, fungicidas e insecticidas) tales como: b1: convencional intensivo, b2: convencional moderado, b3: orgánico intensivo, b4: orgánico moderado. Las variables estudiadas fueron: abundancia, diversidad de especies y producción de biomasa por especie en condición de campo e invernadero. Los tratamientos bajo combinaciones de sombra: I. laurina + S. glauca, y niveles de insumos orgánico moderado, en condiciones de campo e invernadero presentan la menor abundancia y diversidad de especies de malezas. Con respecto al resto de tratamientos; Oplismenus burmannii (Rets.) P. Beauv., fue la especie de maleza benéfica dominante en todos los tratamientos estudiados mostrando una dominancia superior bajo la combinación de sombra T. rosea+ S. glauca, al igual que en el nivel de insumo orgánico moderado, donde cuatro meses después de haber realizado el primer recuento se encontraron menos especies; por la mayor incidencia de malezas en café a pleno sol fueron los que recibieron un control de malezas.

Temas de historia argentina y americana, 2003, n° 2 (número completo)

Doctrina partidaria y formulación del derecho en la Argentina peronista / Ezequiel Abásolo -- El eco de la Guerra Civil Española en la revista Criterio / Ángeles Castro Montero -- Presencia del Rosario en el culto mariano regional y popular de la Argentina /Olga Fernández Latour de Botas -- El ejercicio de la profesión de abogado en Buenos Aires durante el período rivadaviano / Alberto David Leiva -- Catálogo de los buques llegados al Río de la Plata (1700-1775) / José María Mariluz Urquijo -- El proceso de la caza torpedera Rosales y su influencia en la primera legislación argentina de justicia militar / Guillermo Oyarzábal -- Los servicios urbanos en Indias durante el siglo XVIII / Daisy Rípodas Ardanaz -- Documentos -- Reseñas Bibliográficas

La Facultad de Teología en una Iglesia llamada a ser “hospital de campaña”

En el mes de octubre del año pasado se realizó en la Facultad una Reunión de Claustro en la que participamos unos cuarenta profesores, reunidos para conversar e intercambiar ideas acerca de la entrevista que el P. Antonio Spadaro S.J. le hiciera al papa Francisco. Como los temas abordados allí fueron muchos, nos pareció oportuno señalar los que podían interesar de manera más directa a nuestra Facultad. En el diálogo tuvimos presente esa perspectiva, la de la posible recepción o incidencia entre nosotros de algunas de las afirmaciones hechas en esa entrevista. La conversación giró en torno a cuatro grandes campos temáticos: Eclesiológico; Pastoral-Moral; Espiritualidad; Diálogo fe-cultura. Haciéndome eco de esa rica experiencia, que seguramente se prolongará en el presente año académico, quisiera retener un párrafo de dicha entrevista, a partir del cual intentaré reflexionar manteniendo la misma perspectiva, a saber, la de su posible incidencia en la vida de nuestra Facultad...

Estimación de la capacidad de carga turística de la Reserva Natural Volcán Mombacho, Granada, Nicaragua

Este estudio identifica los principales factores que inciden en la determinación de la CCT de los senderos El Cráter, El Puma y El Cafetal de la Reserva Natural Volcán Mombacho. La Capacidad de carga turística se consideró tal y como propone Cifuentes en su metodología, en tres niveles: Capacidad de Carga Física (CCF), Capacidad de Carga Real (CCR) y Capacidad de Carga Efectiva (CCE) (Cifuentes, M. 1999). Se estimó la Capacidad de Manejo (CM) de la RNVM, en 74.24%, obteniendo en el sendero El Cráter una CCE de 442 visitas/día, en el sendero El Puma de 93 visitas/día, y en el sendero El Cafetal de 753 visitas/día. Si se lograse un incremento de la CM en un 80%; el sendero El Cráter in crementaría su CCE a 476 visitas/día; el sendero El Puma a 101 visitas/día; y el sendero El Cafetal a 811 visitas/día. Este escenario está calculado para visitantes con propósitos eco turísticos. Debido a que las visitas de estudiantes de colegio, muestran un comportamiento diferente, se realizó el cálculo considerando dichos elementos en los factores de corrección para los Sendero El Cráter y El Cafetal (El Puma no es frecuentado por estudiantes de colegio). La CCE para estudiantes en el sendero El Cráter fue de 236 visitas/día, con una CM del 74.24%, y para un escenario del 80% de CM se calcula en 255 visitas/día; para el sendero El Cafetal se calculó en 403 visitas/día a un 74.24% de CM y 434 visitas/día a una CM del 80%. Las visitas máximas reportadas para el año 2003 fueron en los meses de Enero y Junio, con 298 y 305 visitas/día; en el año 2002 se reportan los meses de Marzo y Mayo con 366 y 298 visitas/día; la visitación al Sendero El Cráter no excede aún la CCE calculada, no así si los visitantes fueran estudian tes de colegio. Si la tendencia de la visitación continua incrementándose con los años, se requerirá que la administración de la RNVM restringa el número de visitas en los períodos picos de las mismas.