Physical dynamic simulation of shipboard power system components in a distributed computational environment

Shipboard power systems have different characteristics than the utility power systems. In the Shipboard power system it is crucial that the systems and equipment work at their peak performance levels. One of the most demanding aspects for simulations of the Shipboard Power Systems is to connect the device under test to a real-time simulated dynamic equivalent and in an environment with actual hardware in the Loop (HIL). The real time simulations can be achieved by using multi-distributed modeling concept, in which the global system model is distributed over several processors through a communication link. The advantage of this approach is that it permits the gradual change from pure simulation to actual application. In order to perform system studies in such an environment physical phase variable models of different components of the shipboard power system were developed using operational parameters obtained from finite element (FE) analysis. These models were developed for two types of studies low and high frequency studies. Low frequency studies are used to examine the shipboard power systems behavior under load switching, and faults. High-frequency studies were used to predict abnormal conditions due to overvoltage, and components harmonic behavior. Different experiments were conducted to validate the developed models. The Simulation and experiment results show excellent agreement. The shipboard power systems components behavior under internal faults was investigated using FE analysis. This developed technique is very curial in the Shipboard power systems faults detection due to the lack of comprehensive fault test databases. A wavelet based methodology for feature extraction of the shipboard power systems current signals was developed for harmonic and fault diagnosis studies. This modeling methodology can be utilized to evaluate and predicate the NPS components future behavior in the design stage which will reduce the development cycles, cut overall cost, prevent failures, and test each subsystem exhaustively before integrating it into the system.

Herbivore and nutrient impact on primary producer assemblages in a tropical marine environment

Globally, human populations are increasing and coastal ecosystems are becoming increasingly impacted by anthropogenic stressors. As eutrophication and exploitation of coastal resources increases, primary producer response to these drivers becomes a key indicator of ecosystem stability. Despite the importance of monitoring primary producers such as seagrasses and macroalgae, detailed studies on the response of these benthic habitat components to drivers remain relatively sparse. Utilizing a multi-faceted examination of turtle-seagrass and sea urchin-macroalgae consumer and nutrient dynamics, I elucidate the impact of these drivers in Akumal, Quintana Roo, Mexico. In Yal Ku Lagoon, macroalgae bioindicators signified high nutrient availability, which is important for further studies, but did not consistently follow published trends reflecting decreased δ 15N content with distance from suspected source. In Akumal Bay, eutrophication and grazing by turtles and fishes combine to structure patches within the seagrass beds. Grazed seagrass patches had higher structural complexity and productivity than patches continually grazed by turtles and fishes. Results from this study indicate that patch abandonment may follow giving-up density theory, the first to be recorded in the marine environment. As Diadema antillarum populations recover after their massive mortality thirty years ago, the role these echinoids will have in reducing macroalgae cover and altering ecosystem state remains to be clear. Although Diadema antillarum densities within the coral reef ecosystem were comparable to other regions within the Caribbean, the echinoid population in Akumal Bay was an insufficient driver to prevent dominance of a turf-algal-sediment (TAS) state. After a four year study, declining coral cover coupled with increased algal cover suggests that the TAS-dominated state is likely to persist over time despite echinoid recovery. Studies on macroalgal diversity and nutrients within this same region of echinoids indicated diversity and nutrient content of macroalgae increased, which may further increase the persistence of the algal-dominated state. This study provides valuable insight into the variable effects of herbivores and nutrients on primary producers within a tropical coastal ecosystem. Results from this work challenge many of the currently accepted theories on primary producer response to nutrients and herbivory while providing a framework for further studies into these dynamics.

The Complacent Acceptance of Diversity: Human Resource Development in a Culturally Diverse Environment

This paper examines the inability of work organizations to achieve racial balance and use training and development, organization development, and multicultural organizational development principles to manage and enable diversity initiatives. The paper proposes a conceptual framework for a micro and macro model as an approach to diversity initiatives.

Appraising Work Group Performance: New Productivity Opportunities in Hospitality Management

In - Appraising Work Group Performance: New Productivity Opportunities in Hospitality Management – a discussion by Mark R. Edwards, Associate Professor, College of Engineering, Arizona State University and Leslie Edwards Cummings, Assistant Professor, College of Hotel Administration University of Nevada, Las Vegas; the authors initially provide: “Employee group performance variation accounts for a significant portion of the degree of productivity in the hotel, motel, and food service sectors of the hospitality industry. The authors discuss TEAMSG, a microcomputer based approach to appraising and interpreting group performance. TEAMSG appraisal allows an organization to profile and to evaluate groups, facilitating the targeting of training and development decisions and interventions, as well as the more equitable distribution of organizational rewards.” “The caliber of employee group performance is a major determinant in an organization's productivity and success within the hotel and food service industries,” Edwards and Cummings say. “Gaining accurate information about the quality of performance of such groups as organizational divisions, individual functional departments, or work groups can be as enlightening...” the authors further reveal. This perspective is especially important not only for strategic human resources planning purposes, but also for diagnosing development needs and for differentially distributing organizational rewards.” The authors will have you know, employee requirements in an unpredictable environment, which is what the hospitality industry largely is, are difficult to quantify. In an effort to measure elements of performance Edwards and Cummings look to TEAMSG, which is an acronym for Team Evaluation and Management System for Groups. They develop the concept. In discussing background for employees, Edwards and Cummings point-out that employees - at the individual level - must often possess and exercise varied skills. In group circumstances employees often work at locations outside of, or move from corporate unit-to-unit, as in the case of a project team. Being able to transcend individual-to-group mentality is imperative. “A solution which addresses the frustration and lack of motivation on the part of the employee is to coach, develop, appraise, and reward employees on the basis of group achievement,” say the authors. “An appraisal, effectively developed and interpreted, has at least three functions,” Edwards and Cummings suggest, and go on to define them. The authors do place a great emphasis on rewards and interventions to bolster the assertion set forth in their thesis statement. Edwards and Cummings warn that individual agendas can threaten, erode, and undermine group performance; there is no - I - in TEAM.

Perceived Work Status and Turnover Intentions of Casual-Dining Restaurant Employees

The current research examined the effects of perceived work status of hourly employees on the established relationships between turnover intentions and the constructs of autonomy, affective organizational commitment, perceived management concern for employees, and perceived management concern for customers in the casual-dining restaurant industry. Surveys were collected from 296 employees of a multi-unit casual-dining restaurant franchise, part of a large, national, casual-dining restaurant chain. Employeeswith perceived part-time work status revealed a generally negative trend in factors shown to contribute to turnover. Employees who perceived their work status as parttime also showed significantly lower levels of affective organizational commitment than those who perceived their work status as full-time. Additionally, the mean scores of the desirable attributes trended lower for those employees who perceived themselves as part-time. Even more, helping behaviors, so crucial in a casual-dining environment, were lower when employees perceived their work status to be part-time. The current study discusses managerial implications of the research findings and gives suggestions for future research.

Intra -organizational turnover in a self -selective team environment

Four-hundred twenty-seven firefighter/paramedics and firefighter/emergency medical technicians completed questionnaires regarding past and current turnover decisions. The employees, who work in teams of either three or four, have a collective bargaining benefit that allows them to "bid for" (request) new positions/teams every six months; positions are awarded on the basis of seniority. Because employees are leaving neither the organization nor their job, the "bid" process creates intra-organizational turnover on a regular basis. It was hypothesized that those individuals higher in teamwork/social cohesion expectations, higher in interpersonal orientation, and lower in conflict tolerance would report placing greater importance on interpersonal reasons (teamwork/social cohesion) in past bid/assignment decisions. Creation of a conflict tolerance scale was the goal of a preliminary study. It was further hypothesized that current bid/assignment satisfaction would predict the current turnover decision (during the cycle in which the study was conducted), and that past individual turnover frequency would also predict current turnover. All hypotheses were supported. ^

Physical dynamic simulation of shipboard power system components in a distributed computational environment

Shipboard power systems have different characteristics than the utility power systems. In the Shipboard power system it is crucial that the systems and equipment work at their peak performance levels. One of the most demanding aspects for simulations of the Shipboard Power Systems is to connect the device under test to a real-time simulated dynamic equivalent and in an environment with actual hardware in the Loop (HIL). The real time simulations can be achieved by using multi-distributed modeling concept, in which the global system model is distributed over several processors through a communication link. The advantage of this approach is that it permits the gradual change from pure simulation to actual application. In order to perform system studies in such an environment physical phase variable models of different components of the shipboard power system were developed using operational parameters obtained from finite element (FE) analysis. These models were developed for two types of studies low and high frequency studies. Low frequency studies are used to examine the shipboard power systems behavior under load switching, and faults. High-frequency studies were used to predict abnormal conditions due to overvoltage, and components harmonic behavior. Different experiments were conducted to validate the developed models. The Simulation and experiment results show excellent agreement. The shipboard power systems components behavior under internal faults was investigated using FE analysis. This developed technique is very curial in the Shipboard power systems faults detection due to the lack of comprehensive fault test databases. A wavelet based methodology for feature extraction of the shipboard power systems current signals was developed for harmonic and fault diagnosis studies. This modeling methodology can be utilized to evaluate and predicate the NPS components future behavior in the design stage which will reduce the development cycles, cut overall cost, prevent failures, and test each subsystem exhaustively before integrating it into the system.

OS TELEJORNAIS E A ERA DIGITAL: UM ESTUDO SOBRE AS TRANSFORMAÇÕES NO TRABALHO E NA CONSTRUÇÃO DAS NOTÍCIAS EM EMISSORAS REGIONAIS DO VALE DO PARAÍBA

Este trabalho dedica-se a examinar as principais mudanças que ocorrem no processo de construção da notícia nos telejornais regionais paulistas na última década. Objetivamos o estudo das tecnologias digitais conectadas e as consequentes alterações no trabalho dos profissionais envolvidos jornalistas, técnicos e engenheiros, a fim de entender os novos formatos aplicados na transmissão de conteúdo contando com o auxílio da internet. Para tanto, realizamos um estudo comparativo com duas emissoras da Região Metropolitana do Vale do Paraíba: TV Vanguarda, afiliada a Rede Globo, e a Tv Band Vale filiada ao Grupo Bandeirantes, que passaram por transformações em todas as dimensões da difusão de notícias com a digitalização dos seus processos tecnológicos e investimentos no ambiente virtual. Por meio da técnica de pesquisa observação participante chegou-se a conclusão de que a tecnologia é uma realidade adotada nas emissoras contribuindo para agilizar os trabalhos nas redações e aproximar o público dos telejornais.

Designing and Developing Digital and Blended Learning Solutions

The continuous advancement in computing, together with the decline in its cost, has resulted in technology becoming ubiquitous (Arbaugh, 2008, Gros, 2007). Technology is growing and is part of our lives in almost every respect, including the way we learn. Technology helps to collapse time and space in learning. For example, technology allows learners to engage with their instructors synchronously, in real time and also asynchronously, by enabling sessions to be recorded. Space and distance is no longer an issue provided there is adequate bandwidth, which determines the most appropriate format such text, audio or video. Technology has revolutionised the way learners learn; courses are designed; and ‘lessons’ are delivered, and continues to do so. The learning process can be made vastly more efficient as learners have knowledge at their fingertips, and unfamiliar concepts can be easily searched and an explanation found in seconds. Technology has also enabled learning to be more flexible, as learners can learn anywhere; at any time; and using different formats, e.g. text or audio. From the perspective of the instructors and L&D providers, technology offers these same advantages, plus easy scalability. Administratively, preparatory work can be undertaken more quickly even whilst student numbers grow. Learners from far and new locations can be easily accommodated. In addition, many technologies can be easily scaled to accommodate new functionality and/ or other new technologies. ‘Designing and Developing Digital and Blended Learning Solutions’ (5DBS), has been developed to recognise the growing importance of technology in L&D. This unit contains four learning outcomes and two assessment criteria, which is the same for all other units, besides Learning Outcome 3 which has three assessment criteria. The four learning outcomes in this unit are: • Learning Outcome 1: Understand current digital technologies and their contribution to learning and development solutions; • Learning Outcome 2: Be able to design blended learning solutions that make appropriate use of new technologies alongside more traditional approaches; • Learning Outcome 3: Know about the processes involved in designing and developing digital learning content efficiently and what makes for engaging and effective digital learning content; • Learning Outcome 4: Understand the issues involved in the successful implementation of digital and blended learning solutions. Each learning outcome is an individual chapter and each assessment unit is allocated its own sections within the respective chapters. This first chapter addresses the first learning outcome, which has two assessment criteria: summarise the range of currently available learning technologies; critically assess a learning requirement to determine the contribution that could be made through the use of learning technologies. The introduction to chapter one is in Section 1.0. Chapter 2 discusses the design of blended learning solutions in consideration of how digital learning technologies may support face-to-face and online delivery. Three learning theory sets: behaviourism; cognitivism; constructivism, are introduced, and the implication of each set of theory on instructional design for blended learning discussed. Chapter 3 centres on how relevant digital learning content may be created. This chapter includes a review of the key roles, tools and processes that are involved in developing digital learning content. Finally, Chapter 4 concerns delivery and implementation of digital and blended learning solutions. This chapter surveys the key formats and models used to inform the configuration of virtual learning environment software platforms. In addition, various software technologies which may be important in creating a VLE ecosystem that helps to enhance the learning experience, are outlined. We introduce the notion of personal learning environment (PLE), which has emerged from the democratisation of learning. We also review the roles, tools, standards and processes that L&D practitioners need to consider within a delivery and implementation of digital and blended learning solution.

Applications of a Collaborative Open Object Oriented Learning Environment to Electronics, Computing and Mathematics Education

A lightweight Java application suite has been developed and deployed allowing collaborative learning between students and tutors at remote locations. Students can engage in group activities online and also collaborate with tutors. A generic Java framework has been developed and applied to electronics, computing and mathematics education. The applications are respectively: (a) a digital circuit simulator, which allows students to collaborate in building simple or complex electronic circuits; (b) a Java programming environment where the paradigm is behavioural-based robotics, and (c) a differential equation solver useful in modelling of any complex and nonlinear dynamic system. Each student sees a common shared window on which may be added text or graphical objects and which can then be shared online. A built-in chat room supports collaborative dialogue. Students can work either in collaborative groups or else in teams as directed by the tutor. This paper summarises the technical architecture of the system as well as the pedagogical implications of the suite. A report of student evaluation is also presented distilled from use over a period of twelve months. We intend this suite to facilitate learning between groups at one or many institutions and to facilitate international collaboration. We also intend to use the suite as a tool to research the establishment and behaviour of collaborative learning groups. We shall make our software freely available to interested researchers.

‘Probing with the prototype’: using a prototype e-participation platform as a digital cultural probe to investigate youth engagement with the environment

This study describes how we used a prototype e-participation plat-form as a digital cultural probe to investigate youth motivation and engagement strategies. This is a novel way of considering digital cultural probes which can contribute to the better creation of e-participation platforms. This probe has been conducted as part of the research project STEP which aims at creating an e-participation platform to engage young European Citizens in environmental decision making. Our probe technique has given an insight into the environ-mental issues concerning young people across Europe as well as possible strat-egies for encouraging participation. How the e-participation platform can be utilised to support youth engagement through opportunities for social interac-tion and leadership is discussed. This study leads to a better understanding of how young people can co-operate with each other to provide collective intelli-gence and how this knowledge could contribute to effective e-participation of young people.

Indoor environment and the impact on the health of pre-exisiting asthmatics at work: the development of a risk management framework

This thesis examines the spatial and temporal variation in nitrogen dioxide (NO2) levels in Guernsey and the impacts on pre-existing asthmatics. Whilst air quality in Guernsey is generally good, the levels of NO2 exceed UK standards in several locations. The evidence indicates that people suffering from asthma have exacerbation of their symptoms if exposed to elevated levels of air pollutants including NO2, although this research has never been carried out in Guernsey before. In addition, exposure assessment of individuals is rarely carried out and research in this area is limited due to the complexity of undertaking such a study, which will include a combination of exposures in the home, the workplace and ambient exposures, which vary depending on the individual daily experience. For the first time in Guernsey, this research has examined NO2 levels in correlation with asthma patient admissions to hospital, assessment of NO2 exposures in typical homes and typical workplaces in Guernsey. The data showed a temporal correlation between NO2 levels and the number of hospital admissions and the trend from 2008-2012 was upwards. Statistical analysis of the data did not show a significant linear correlation due to the small size of the data sets. Exposure assessment of individuals showed a spatial variation in exposures in Guernsey and assessment in indoor environments showed that real-time analysis of NO2 levels needs to be undertaken if indoor micro environments for NO2 are the be assessed adequately. There was temporal and spatial variation in NO2 concentrations measured using diffusion tubes, which provide a monthly mean value, and analysers measuring NO2 concentrations in real time. The research shows that building layout and design are important factors for good air flow and ventilation and the dispersion of NO2 indoors. Environmental Health Officers have statutory responsibilities for ambient air quality, hygiene of buildings and workplace environments and this role needs to be co-ordinated with healthcare professionals to improve health outcomes for asthmatics. The outcome of the thesis was the development of a risk management framework for pre-existing asthmatics at work for use by regulators of workplaces and an information leaflet to assist in improving health outcomes for asthmatics in Guernsey.

Ludification of work or labourisation of play? On work/play interferences in the digital times.

Presented at Money and Games: 12th annual Game Research Lab Spring seminar, University of Tampere, Finland, on the 19th of April 2016.

A Study of The Skills Sectors’ learners’ expectations and experiences of the digital environment

A Study of The Skills Sectors’ learners’ expectations and experiences of the digital environment - A Literature review

Literature Review: A Study of The Skills Sectors’ learners’ expectations and experiences of the digital environment

Literature Review - A Study of The Skills Sectors’ learners’ expectations and experiences of the digital environment