975 resultados para cross section resonance
Resumo:
A cross-sectional study aims to describe the overall picture of a phenomenon, a situational problem, an attitude or an issue, by asking a cross-section of a given population at one specified moment in time. This paper describes the key features of the cross-sectional survey method. It begins by highlighting the main principles of the method, then discusses stages in the research process, drawing on two surveys of primary care pharmacists to illustrate some salient points about planning, sampling frames, definition and conceptual issues, research instrument design and response rates. Four constraints in prescribing studies were noted. First the newness of the subject meant a low basis of existing knowledge to design a questionnaire. Second, there was no public existing database for the sampling frame, so a pragmatic sampling exercise was used. Third, the definition of a Primary Care Pharmacist (PCP) [in full] and respondents recognition of that name and identification with the new role limited the response. Fourth, a growing problem for all surveys, but particularly with pharmacists and general practitioners (GP) [in full] is the growing danger of survey fatigue, which has a negative impact on response levels.
Resumo:
The kaon electroproduction reaction H(e, e ′K+)Λ was studied as a function of the four momentum transfer, Q2, for different values of the virtual photon polarization parameter. Electrons and kaons were detected in coincidence in two High Resolution Spectrometers (HRS) at Jefferson Lab. Data were taken at electron beam energies ranging from 3.4006 to 5.7544 GeV. The kaons were identified using combined time of flight information and two Aerogel Čerenkov detectors used for particle identification. For different values of Q2 ranging from 1.90 to 2.35 GeV/c2 the center of mass cross sections for the Λ hyperon were determined for 20 kinematics and the longitudinal, σ L, and transverse, σT, terms were separated using the Rosenbluth separation technique. ^ Comparisons between available models and data have been studied. The comparison supports the t-channel dominance behavior for kaon electroproduction. All models seem to underpredict the transverse cross section. An estimate of the kaon form factor has been explored by determining the sensitivity of the separated cross sections to variations of the kaon EM form factor. From comparison between models and data we can conclude that interpreting the data using the Regge model is quite sensitive to a particular choice for the EM form factors. The data from the E98-108 experiment extends the range of the available kaon electroproduction cross section data to an unexplored region of Q2 where no separations have ever been performed. ^
Resumo:
A measurement of the production cross sections of top quark pairs in association with a W or Z boson is presented. The measurement uses 20.3 fb−1 of data from proton-proton collisions at √s = 8 TeV collected by the ATLAS detector at the Large Hadron Collider. Four different final states are considered: two opposite-sign leptons, two same-sign leptons, three leptons, and four leptons. The t t̅ W and t t̅ Z cross sections are simultaneously extracted using a maximum likelihood fit over all the final states. The t t̅ Z cross section is measured to be 176+58−52 fb, corresponding to a signal significance of 4.2σ. The t t̅ W cross section is measured to be 369+100−91 fb, corresponding to a signal significance of 5.0σ. The results are consistent with next-to-leading-order calculations for the tt̅W and tt̅Z processes.
Resumo:
New absolute cross sections for dissociative electron attachment to HCCCN (cyanoacetylene or propiolonitrile) in the range of 0-10 eV electron energy are presented here, which have been determined from a new analysis of previously reported data (Graupner et al 2006 New J. Phys. 8 117). The highest cross sections are observed for the formation of CN- at 5.3 eV and CCCN- at 5.1 eV; approximately 0.06 Å2 and 0.05 Å2 respectively. As part of the re-analysis, it was necessary to determine absolute cross sections for electron-impact ionization of HCCCN with the binary-encounter Bethe method. These electron-impact ionization absolute cross sections for HCCCN are also presented here; the maximum value was found to be ∼6.6 Å2 at ∼80 eV.
Resumo:
Polymer Optical Fibers have occupied historically a place for large core flexible fibers operating in short distances. In addition to their practical passive application in short-haul communication they constitute a potential research field as active devices with organic dopants. Organic dyes are preferred as dopants over organic semiconductors due to their higher optical cross section. Thus organic dyes as gain media in a polymer fiber is used to develop efficient and narrow laser sources with a tunability throughout the visible region or optical amplifier with high gain. Dyes incorporated in fiber form has added advantage over other solid state forms such as films since the pump power required to excite the molecules in the core of the fiber is less thereby utilising the pump power effectively. In 1987, Muto et.al investigated a dye doped step index polymer fiber laser. Afterwards, numerous researches have been carried out in this area demonstrating laser emission from step index, graded index and hollow optical fibers incorporating various dyes. Among various dyes, Rhodamine6G is the most widely and commonly used laser dye for the last four decades. Rhodamine6G has many desirable optical properties which make it preferable over other organic dyes such as Coumarin, Nile Blue, Curcumin etc. The research focus on the implementation of efficient fiber lasers and amplifiers for short fiber distances. Developing efficient plastic lasers with electrical pumping can be a new proposal in this field which demands lowest possible threshold pump energy of the gain medium in the cavity as an important parameter. One way of improving the efficiency of the lasers, through low threshold pump energy, is by modifying the gain of the amplifiers in the resonator/cavity. Success in the field of Radiative Decay Engineering can pave way to this problem. Laser gain media consisting of dye-nanoparticle composites can improve the efficiency by lowering the lasing threshold and enhancing the photostability. The electric field confined near the surface of metal nanoparticles due to Localized Surface Plasmon Resonance can be very effective for the excitation of active centers to impart high optical gain for lasing. Since the Surface Plasmon Resonance of nanoparticles of gold and silver lies in the visible range, it can affect the spectral emission characteristics of organic dyes such as Rhodamine6G through plasmon field generated by the particles. The change in emission of the dye placed near metal nanoparticles depend on plasmon field strength which in turn depends on the type of metal, size of nanoparticle, surface modification of the particle and the wavelength of incident light. Progress in fabrication of different types of nanostructures lead to the advent of nanospheres, nanoalloys, core-shell and nanowires to name a few. The thesis deals with the fabrication and characterisation of polymer optical fibers with various metallic and bimetallic nanostructures incorporated in the gain media for efficient fiber lasers with low threshold and improved photostability.
Resumo:
The t/t production cross section is measured with the CMS detector in the all-jets channel in $pp$ collisions at the centre-of-mass energy of 13 TeV. The analysis is based on the study of t/t events in the boosted topology, namely events in which decay products of the quark top have a high Lorentz boost and are thus reconstructed in the detector as a single, wide jet. The data sample used in this analysis corresponds to an integrated luminosity of 2.53 fb-1. The inclusive cross section is found to be sigma(t/t) = 727 +- 46 (stat.) +115-112 (sys.) +- 20~(lumi.) pb, a value which is consistent with the theoretical predictions. The differential, detector-level cross section is measured as a function of the transverse momentum of the leading jet and compared to the QCD theoretical predictions. Finally, the differential, parton-level cross section is reported, measured as a function of the transverse momentum of the leading parton, extrapolated to the full phase space and compared to the QCD predictions.
Resumo:
Although upper body musculoskeletal disorders (MSDs) represent an increasingly important issue for university students, few if any studies have targeted the occupational therapy faculty. Given this dearth of information, it was considered necessary to investigate a cross-section of Australian occupational therapy students by means of an established questionnaire survey. Completed replies were obtained from 95.7%, 100% and 97.7% (n = 44, 55 and 48) of students in the first, second and fourth years of a large occupational therapy school in northern Queensland, Australia.---------- The 12-month period prevalence of MSDs was as follows: neck (67.4%), shoulder (46.3%) and upper back (39.5%). Three-quarters of all students (75.5%) reported an MSD occurring in at least one of these body regions. Over half (56.5%) reported an MSD over 2 days' duration in the past year. Almost 40% (39.5%) reported an MSD that had affected their daily life, while one-quarter (25.2%) needed some type of treatment.---------- Logistic regression indicated that students aged over 21 years were almost four times more likely to report shoulder-related MSD (OR 3.7, 95%CI: 1.4-10.2). Year of study in the occupational therapy course was another important MSD correlate, with adjusted odds ratios ranging from 3.3 at the upper back (OR 3.3, 95%CI: 1.2-9.6) to 10.9 at the neck (OR 10.9, 95%CI: 3.2-43.8). Computer usage also incurred a certain degree of risk, with students who spent over 5 hours per week on the computer having an increased risk of MSD at the neck (OR 5.0, 95%CI: 1.3-21.5) and shoulder (OR 4.7, 95%CI: 1.4-18.3).---------- Overall, this study suggests that Australian occupational therapy students have a large burden from MSDs in the upper body region, even more so than other student groups and some working populations. Since the distribution of MSD risk is not uniform among them, interventions to help reduce these conditions need to be carefully targeted. Further longitudinal investigations would also be useful in determining the mechanisms and contributory factors for MSDs among this unique student population.
Resumo:
Grassroots groups – autonomous, not-for-profit groups made up of volunteers – and grassroots initiatives play an invaluable, yet often invisible, role in our communities. The informal processes and collective efforts of grassroots associations, social movements, self-help groups and local action collectives are central to civil society and community building. Grassroots leaders are critical to such initiatives, yet little is known about their influences, motivations, successes and challenges. This study aims to address this dearth in the research literature by noting the experiences of a sample of grassroots community leaders to help gain a greater knowledge about community leadership in action. In-depth semi-structured interviews were held with nine grassroots leaders from a broad cross-section of sectors of interest. The criteria for selection were that these leaders were not in a formal non-profit organisation, were not paid for their work yet were leading grassroots groups or initiatives involved in active community building, campaigning or self-help. The paper reflects on findings in regard to the formative experiences that impacted upon the community leaders’ direction in life, their beliefs and ideas about what it means to be a leader, the strategies they use to lead and challenges they continue to face, and the role of learning and support in maintaining and developing their roles. Finally, the key themes relating to grassroots leadership and how these leaders enhance their own effectiveness and resilience are explored.
Resumo:
Purpose: The purpose of this paper is to analyse the risk management process conducted by some private and not-for-profit affordable housing providers in South East Queensland, and draw conclusions about the relationship between risk assessments/responses and past experiences.----- Design/methodology/approach: In-depth interviews of selected non-government housing providers have been conducted to facilitate an understanding of their approach to risk assessment in developing and in managing affordable housing projects. Qualitative data are analysed using thematic analysis to find emerging themes suggested by interview participants.----- Findings: The paper finds that informal risk management process is used as part of normal business process in accordance with industry standards. Many interviewees agree that the recognition of financial risk and the fear of community rejection of such housing projects have restrained them from committing to such investment projects. The levels of acceptance of risk are not always consistent across housing providers which create opportunities to conduct multi-stakeholder partnership to reduce overall risk.----- Research limitations/implications: The paper has implications for developers or investors who seek to include affordable housing as part of their portfolio. However, data collected in the study are a cross-section of interviews that will not include the impact on recent tax incentives offers by the Australian Commonwealth Government.----- Practical implications: The study suggests that implementing improvements to the risk mitigation and management framework may assist in promoting the supply of affordable housing by non-government providers.----- Originality/value: The focus of the study is the interaction between partnerships and risk management in development and management of affordable rental housing.
Resumo:
Lawyers have traditionally viewed law as a closed system, and doctrinal research has been the research methodology used most widely in the profession. This reflects traditional concepts of legal reasoning. There is a wealth of reliable and valid social science data available to lawyers and judges. Judges in fact often refer to general facts about the world, society, institutions and human behaviour (‘empirical facts’). Legal education needs to prepare our students for this broader legal context. This paper examines how ‘empirical facts’ are used in Australian and other common law courts. Specifically, the paper argues that there is a need for enhanced training in non-doctrinal research methodologies across the law school curriculum. This should encompass a broad introduction to social science methods, with more attention being paid to a cross-section of methodologies such as content analysis, comparative law and surveys that are best applied to law.
Resumo:
3D Motion capture is a medium that plots motion, typically human motion, converting it into a form that can be represented digitally. It is a fast evolving field and recent inertial technology may provide new artistic possibilities for its use in live performance. Although not often used in this context, motion capture has a combination of attributes that can provide unique forms of collaboration with performance arts. The inertial motion capture suit used for this study has orientation sensors placed at strategic points on the body to map body motion. Its portability, real-time performance, ease of use, and its immunity from line-of-sight problems inherent in optical systems suggest it would work well as a live performance technology. Many animation techniques can be used in real-time. This research examines a broad cross-section of these techniques using four practice-led cases to assess the suitability of inertial motion capture to live performance. Although each case explores different visual possibilities, all make use of the performativity of the medium, using either an improvisational format or interactivity among stage, audience and screen that would be difficult to emulate any other way. A real-time environment is not capable of reproducing the depth and sophistication of animation people have come to expect through media. These environments take many hours to render. In time the combination of what can be produced in real-time and the tools available in a 3D environment will no doubt create their own tree of aesthetic directions in live performance. The case study looks at the potential of interactivity that this technology offers.
Resumo:
In situ near-IR transmittance measurements have been used to characterize the density of trapped electrons in dye-sensitized solar cells (DSCs). Measurements have been made under a range experimental conditions including during open circuit photovoltage decay and during recording of the IV characteristic. The optical cross section of electrons at 940 nm was determined by relating the IR absorbance to the density of trapped electrons measured by charge extraction. The value, σn = 5.4 × 10-18 cm2, was used to compare the trapped electron densities in illuminated DSCs under open and short circuit conditions in order to quantify the difference in the quasi Fermi level, nEF. It was found that nEF for the cells studied was 250 meV over wide range of illuminat on intensities. IR transmittance measurements have also been used to quantify shifts in conduction band energy associated with dye adsorption.
Resumo:
The topic of corruption has recently attracted a great deal of attention, yet there is still a lack of micro level empirical evidence regarding the determinates of corruption. Furthermore, the present literature has not investigated the effects of political interest on corruption despite the interesting potential of this link. We address these deficiencies by analysing a cross-section of individuals, using the World Values Survey. We explore the determinants of corruption through two dependant variables (perceived corruption and the justifiability of corruption). The impact of political interest on corruption is explored through three different proxies presenting empirical evidence at both the cross-country level and the within-country level.The results of the multivariate analysis suggest that political interest has an impact on corruption controlling for a huge number of factors.
Resumo:
Aim: The purpose of the study was to explore why Aboriginal women participate in cancer screening programs but appear reluctant to following-up results, or accept medical advice about treatment. Methods: Interpretive ethnography, a qualitative methodology, was used to explore Aboriginal women’s perception of cancer, and the cultural context in which meaning was constructed and influenced treatment decision. Data collection, which occurred over two years, involved fieldwork, participant-observation, face-to-face interviews and focus groups, in two rural Aboriginal communities. Forty eight interviews were recorded from a cross section of the communities, including cancer survivors and patients, family members, health care providers and other women from the community. Results: Key findings were that Aboriginal women’s had a fearful and fatalistic attitude toward cancer, doubted the efficacy of treatment and carried an enduring ambivalence toward the authority of whiteman’s medicine. The women faced a dilemma of wanting access to cancer treatment options but feared entering hospital or clinics not attuned to their cultural needs. Conclusion: The findings highlight the need for a culture-centred approach that decentres the authority of conventional services and instead gives prominence to Aboriginal cultural values as a focal point in cancer control. It should be the responsibility of cancer nurses and others to engage with their local Aboriginal communities to build relationships that foster an exchange of learning about cultural differences that make a difference to how cancer control is practiced.
Resumo:
We explore the empirical usefulness of conditional coskewness to explain the cross-section of equity returns. We find that coskewness is an important determinant of the returns to equity, and that the pricing relationship varies through time. In particular we find that when the conditional market skewness is positive investors are willing to sacrifice 7.87% annually per unit of gamma (a standardized measure of coskewness risk) while they only demand a premium of 1.80% when the market is negatively skewed. A similar picture emerges from the coskewness factor of Harvey and Siddique (Harvey, C., Siddique, A., 2000a. Conditional skewness in asset pricing models tests. Journal of Finance 65, 1263–1295.) (a portfolio that is long stocks with small coskewness with the market and short high coskewness stocks) which earns 5.00% annually when the market is positively skewed but only 2.81% when the market is negatively skewed. The conditional two-moment CAPM and a conditional Fama and French (Fama, E., French, K., 1992. The cross-section of expected returns. Journal of Finance 47,427465.) three-factor model are rejected, but a model which includes coskewness is not rejected by the data. The model also passes a structural break test which many existing asset pricing models fail.