998 resultados para cms lhc 7TeV
Resumo:
Crossing the Franco-Swiss border, the Large Hadron Collider (LHC), designed to collide 7 TeV proton beams, is the world's largest and most powerful particle accelerator the operation of which was originally intended to commence in 2008. Unfortunately, due to an interconnect discontinuity in one of the main dipole circuit's 13 kA superconducting busbars, a catastrophic quench event occurred during initial magnet training, causing significant physical system damage. Furthermore, investigation into the cause found that such discontinuities were not only present in the circuit in question, but throughout the entire LHC. This prevented further magnet training and ultimately resulted in the maximum sustainable beam energy being limited to approximately half that of the design nominal, 3.5-4 TeV, for the first three years of operation (Run 1, 2009-2012) and a major consolidation campaign being scheduled for the first long shutdown (LS 1, 2012-2014). Throughout Run 1, a series of studies attempted to predict the amount of post-installation training quenches still required to qualify each circuit to nominal-energy current levels. With predictions in excess of 80 quenches (each having a recovery time of 8-12+ hours) just to achieve 6.5 TeV and close to 1000 quenches for 7 TeV, it was decided that for Run 2, all systems be at least qualified for 6.5 TeV operation. However, even with all interconnect discontinuities scheduled to be repaired during LS 1, numerous other concerns regarding circuit stability arose. In particular, observations of an erratic behaviour of magnet bypass diodes and the degradation of other potentially weak busbar sections, as well as observations of seemingly random millisecond spikes in beam losses, known as unidentified falling object (UFO) events, which, if persist at 6.5 TeV, may eventually deposit sufficient energy to quench adjacent magnets. In light of the above, the thesis hypothesis states that, even with the observed issues, the LHC main dipole circuits can safely support and sustain near-nominal proton beam energies of at least 6.5 TeV. Research into minimising the risk of magnet training led to the development and implementation of a new qualification method, capable of providing conclusive evidence that all aspects of all circuits, other than the magnets and their internal joints, can safely withstand a quench event at near-nominal current levels, allowing for magnet training to be carried out both systematically and without risk. This method has become known as the Copper Stabiliser Continuity Measurement (CSCM). Results were a success, with all circuits eventually being subject to a full current decay from 6.5 TeV equivalent current levels, with no measurable damage occurring. Research into UFO events led to the development of a numerical model capable of simulating typical UFO events, reproducing entire Run 1 measured event data sets and extrapolating to 6.5 TeV, predicting the likelihood of UFO-induced magnet quenches. Results provided interesting insights into the involved phenomena as well as confirming the possibility of UFO-induced magnet quenches. The model was also capable of predicting that such events, if left unaccounted for, are likely to be commonplace or not, resulting in significant long-term issues for 6.5+ TeV operation. Addressing the thesis hypothesis, the following written works detail the development and results of all CSCM qualification tests and subsequent magnet training as well as the development and simulation results of both 4 TeV and 6.5 TeV UFO event modelling. The thesis concludes, post-LS 1, with the LHC successfully sustaining 6.5 TeV proton beams, but with UFO events, as predicted, resulting in otherwise uninitiated magnet quenches and being at the forefront of system availability issues.
Resumo:
The scalar sector of the simplest version of the 3-3-1 electroweak model is constructed with three Higgs triplets only. We show that a relation involving two of the constants of the model, two vacuum expectation values of the neutral scalars, and the mass of the doubly charged Higgs boson leads to important information concerning the signals of this scalar particle.
Resumo:
Using a peculiar version of the SU(3)(L) circle times U(1)(N) electroweak model, we investigate the production of doubly charged Higgs boson at the Large Hadron Collider. Our results include branching ratio calculations for the doubly charged Higgs and for one of the neutral scalar bosons of the model. (c) 2006 Elsevier B.V. All rights reserved.
Resumo:
The Complex singlet extension of the Standard Model (CxSM) is the simplest extension that provides scenarios for Higgs pair production with different masses. The model has two interesting phases: the dark matter phase, with a Standard Model-like Higgs boson, a new scalar and a dark matter candidate; and the broken phase, with all three neutral scalars mixing. In the latter phase Higgs decays into a pair of two different Higgs bosons are possible. In this study we analyse Higgs-to-Higgs decays in the framework of singlet extensions of the Standard Model (SM), with focus on the CxSM. After demonstrating that scenarios with large rates for such chain decays are possible we perform a comparison between the NMSSM and the CxSM. We find that, based on Higgs-to-Higgs decays, the only possibility to distinguish the two models at the LHC run 2 is through final states with two different scalars. This conclusion builds a strong case for searches for final states with two different scalars at the LHC run 2. Finally, we propose a set of benchmark points for the real and complex singlet extensions to be tested at the LHC run 2. They have been chosen such that the discovery prospects of the involved scalars are maximised and they fulfil the dark matter constraints. Furthermore, for some of the points the theory is stable up to high energy scales. For the computation of the decay widths and branching ratios we developed the Fortran code sHDECAY, which is based on the implementation of the real and complex singlet extensions of the SM in HDECAY.
Resumo:
SCOPUS: ar.j
Resumo:
At the HL-LHC, proton bunches will cross each other every 25. ns, producing an average of 140 pp-collisions per bunch crossing. To operate in such an environment, the CMS experiment will need a L1 hardware trigger able to identify interesting events within a latency of 12.5. μs. The future L1 trigger will make use also of data coming from the silicon tracker to control the trigger rate. The architecture that will be used in future to process tracker data is still under discussion. One interesting proposal makes use of the Time Multiplexed Trigger concept, already implemented in the CMS calorimeter trigger for the Phase I trigger upgrade. The proposed track finding algorithm is based on the Hough Transform method. The algorithm has been tested using simulated pp-collision data. Results show a very good tracking efficiency. The algorithm will be demonstrated in hardware in the coming months using the MP7, which is a μTCA board with a powerful FPGA capable of handling data rates approaching 1. Tb/s.
Resumo:
La sezione d'urto differenziale di produzione di coppie t/t viene misurata utilizzando dati raccolti nel 2012 dall'esperimento CMS in collisioni protone-protone con un'energia nel centro di massa di 8 TeV. La misura viene effettuata su eventi che superano una serie di selezioni applicate al fine di migliorare il rapporto segnale/rumore. In particolare, facendo riferimento al canale all-hadronic, viene richiesta la presenza di almeno sei jet nello stato finale del decadimento della coppia t/t di cui almeno due con quark b. Ottenuto un campione di eventi sufficientemente puro, si può procedere con un fit cinematico, che consiste nel minimizzare una funzione chi quadro in cui si considera tra i parametri liberi la massa invariante associata ai quark top; le cui distribuzioni, richiedendo che il chi quadro sia <10, vengono ricostruite per gli eventi candidati, per il segnale, ottenuto mediante eventi simulati, e per il fondo, modellizzato negando la presenza di jet con b-tag nello stato finale del decadimento della coppia t/t. Con le suddette distribuzioni, attraverso un fit di verosimiglianza, si deducono le frazioni di segnale e di fondo presenti negli eventi. È dunque possibile riempire un istogramma di confronto tra gli eventi candidati e la somma di segnale+fondo per la massa invariante associata ai quark top. Considerando l'intervallo di valori nel quale il rapporto segnale/rumore è migliore si possono ottenere istogrammi di confronto simili al precedente anche per la quantità di moto trasversa del quark top e la massa invariante e la rapidità del sistema t/t. Infine, la sezione d'urto differenziale è misurata attraverso le distribuzioni di tali variabili dopo aver sottratto negli eventi il fondo.
Resumo:
The t/t production cross section is measured with the CMS detector in the all-jets channel in $pp$ collisions at the centre-of-mass energy of 13 TeV. The analysis is based on the study of t/t events in the boosted topology, namely events in which decay products of the quark top have a high Lorentz boost and are thus reconstructed in the detector as a single, wide jet. The data sample used in this analysis corresponds to an integrated luminosity of 2.53 fb-1. The inclusive cross section is found to be sigma(t/t) = 727 +- 46 (stat.) +115-112 (sys.) +- 20~(lumi.) pb, a value which is consistent with the theoretical predictions. The differential, detector-level cross section is measured as a function of the transverse momentum of the leading jet and compared to the QCD theoretical predictions. Finally, the differential, parton-level cross section is reported, measured as a function of the transverse momentum of the leading parton, extrapolated to the full phase space and compared to the QCD predictions.
Resumo:
In this thesis, a search for same-sign top quark pairs produced according to the Standard Model Effective Field Theory (SMEFT) is presented. The analysis is carried out within the ATLAS Collaboration using collision data at a center-of-mass energy of $\sqrt{s} = 13$ TeV, collected by the ATLAS detector during the Run 2 of the Large Hadron Collider, corresponding to an integrated luminosity of $140$ fb$^{-1}$. Three SMEFT operators are considered in the analysis, namely $\mathcal{O}_{RR}$, $\mathcal{O}_{LR}^{(1)}$, and $\mathcal{O}_{LR}^{(8)}$. The signal associated to same-sign top pairs is searched in the dilepton channel, with the top quarks decaying via $t \longrightarrow W^+ b \longrightarrow \ell^+ \nu b$, leading to a final state signature composed of a pair of high-transverse momentum same-sign leptons and $b$-jets. Deep Neural Networks are employed in the analysis to enhance sensitivity to the different SMEFT operators and to perform signal-background discrimination. This is the first result of the ATLAS Collaboration concerning the search for same-sign top quark pairs production in proton-proton collision data at $\sqrt{s} = 13$ TeV, in the framework of the SMEFT.
Resumo:
The enhanced production of strange hadrons in heavy-ion collisions relative to that in minimum-bias pp collisions is historically considered one of the first signatures of the formation of a deconfined quark-gluon plasma. At the LHC, the ALICE experiment observed that the ratio of strange to non-strange hadron yields increases with the charged-particle multiplicity at midrapidity, starting from pp collisions and evolving smoothly across interaction systems and energies, ultimately reaching Pb-Pb collisions. The understanding of the origin of this effect in small systems remains an open question. This thesis presents a comprehensive study of the production of $K^{0}_{S}$, $\Lambda$ ($\bar{\Lambda}$) and $\Xi^{-}$ ($\bar{\Xi}^{+}$) strange hadrons in pp collisions at $\sqrt{s}$ = 13 TeV collected in LHC Run 2 with ALICE. A novel approach is exploited, introducing, for the first time, the concept of effective energy in the study of strangeness production in hadronic collisions at the LHC. In this work, the ALICE Zero Degree Calorimeters are used to measure the energy carried by forward emitted baryons in pp collisions, which reduces the effective energy available for particle production with respect to the nominal centre-of-mass energy. The results presented in this thesis provide new insights into the interplay, for strangeness production, between the initial stages of the collision and the produced final hadronic state. Finally, the first Run 3 results on the production of $\Omega^{\pm}$ ($\bar{\Omega}^{+}$) multi-strange baryons are presented, measured in pp collisions at $\sqrt{s}$ = 13.6 TeV and 900 GeV, the highest and lowest collision energies reached so far at the LHC. This thesis also presents the development and validation of the ALICE Time-Of-Flight (TOF) data quality monitoring system for LHC Run 3. This work was fundamental to assess the performance of the TOF detector during the commissioning phase, in the Long Shutdown 2, and during the data taking period.
Resumo:
Il quark-gluon plasma (QGP) è uno stato della materia previsto dalla cromodinamica quantistica. L’esperimento ALICE a LHC ha tra i suoi obbiettivi principali lo studio della materia fortemente interagente e le proprietà del QGP attraverso collisioni di ioni pesanti ultra-relativistici. Per un’esaustiva comprensione di tali proprietà, le stesse misure effettuate su sistemi collidenti più piccoli (collisioni protone-protone e protone-ione) sono necessarie come riferimento. Le recenti analisi dei dati raccolti ad ALICE hanno mostrato che la nostra comprensione dei meccanismi di adronizzazione di quark pesanti non è completa, perchè i dati ottenuti in collisioni pp e p-Pb non sono riproducibili utilizzando modelli basati sui risultati ottenuti con collisioni e+e− ed ep. Per questo motivo, nuovi modelli teorici e fenomenologici, in grado di riprodurre le misure sperimentali, sono stati proposti. Gli errori associati a queste nuove misure sperimentali al momento non permettono di verificare in maniera chiara la veridicità dei diversi modelli proposti. Nei prossimi anni sarà quindi fondamentale aumentare la precisione di tali misure sperimentali; d’altra parte, stimare il numero delle diverse specie di particelle prodotte in una collisione può essere estremamente complicato. In questa tesi, il numero di barioni Lc prodotti in un campione di dati è stato ottenuto utilizzando delle tecniche di machine learning, in grado di apprendere pattern e imparare a distinguere candidate di segnale da quelle di fondo. Si sono inoltre confrontate tre diverse implementazioni di un algoritmo di Boosted Decision Trees (BDT) e si è utilizzata quella più performante per ricostruire il barione Lc in collisioni pp raccolte dall’esperimento ALICE.
Resumo:
The scientific success of the LHC experiments at CERN highly depends on the availability of computing resources which efficiently store, process, and analyse the amount of data collected every year. This is ensured by the Worldwide LHC Computing Grid infrastructure that connect computing centres distributed all over the world with high performance network. LHC has an ambitious experimental program for the coming years, which includes large investments and improvements both for the hardware of the detectors and for the software and computing systems, in order to deal with the huge increase in the event rate expected from the High Luminosity LHC (HL-LHC) phase and consequently with the huge amount of data that will be produced. Since few years the role of Artificial Intelligence has become relevant in the High Energy Physics (HEP) world. Machine Learning (ML) and Deep Learning algorithms have been successfully used in many areas of HEP, like online and offline reconstruction programs, detector simulation, object reconstruction, identification, Monte Carlo generation, and surely they will be crucial in the HL-LHC phase. This thesis aims at contributing to a CMS R&D project, regarding a ML "as a Service" solution for HEP needs (MLaaS4HEP). It consists in a data-service able to perform an entire ML pipeline (in terms of reading data, processing data, training ML models, serving predictions) in a completely model-agnostic fashion, directly using ROOT files of arbitrary size from local or distributed data sources. This framework has been updated adding new features in the data preprocessing phase, allowing more flexibility to the user. Since the MLaaS4HEP framework is experiment agnostic, the ATLAS Higgs Boson ML challenge has been chosen as physics use case, with the aim to test MLaaS4HEP and the contribution done with this work.
Resumo:
In the upcoming years, various upgrades and improvements are planned for the CERN Large Hadron Collider (LHC) and represent the mandate of the High-Luminosity project. The upgrade will allow for a total stored beam energy of about 700 MJ, which will need, among others, an extremely efficient collimation system. This will be achieved with the addition of a hollow electron lens (HEL) system to help control the beam-halo depletion and mitigate the effects of fast beam losses. In this master thesis, we present a diffusion model of the HEL for HL-LHC. In particular, we explore several scenarios to use such a device, focusing on the halo depletion efficiency given by different noise regimes.
Resumo:
La ricostruzione delle traiettorie delle particelle prodotte dai vertici di interazione a LHC è di fondamentale importanza per tutti gli esperimenti. Questo passo è uno dei più dispendiosi in termini di tempo e calcolo computazionale nella catena di ricostruzione dell’evento e diventa sempre più complesso con l’aumentare del numero di collisioni. L’esperimento CMS adotta un rivelatore di tracciamento con tecnologia al silicio, dove la parte più interna sfrutta rivelatori con geometria a pixel, mentre la parte esterna utilizza delle strisce di silicio. Per quanto riguarda la ricostruzione nel rivelatore a pixel, sono stati sviluppati diversi algoritmi ottimizzati per fronteggiare l’alto rate di acquisizione dati, sfruttando anche il calcolo parallelo su GPU, con un’efficienza di tracciamento comparabile o superiore agli algoritmi precedentemente utilizzati. Questi nuovi algoritmi sono alla base del software Patatrack per la ricostruzione delle traiettorie. Il lavoro descritto in questa tesi punta ad adattare Patatrack ad una geometria diversa e più complessa di quella di CMS e di valutarne le prestazioni di fisica e computazionali. Sono stati utilizzati i dati forniti dalla TrackML challenge, il cui scopo è incentivare lo sviluppo di nuovi algoritmi di ricostruzione di tracce per gli esperimenti in fisica delle alte energie. E' stato condotto uno studio approfondito della nuova geometria per potervi successivamente adattare il software esistente. Infine, la catena di ricostruzione è stata modificata per poter utilizzare i dati forniti dalla TrackML challenge e permettere la ricostruzione delle traiettorie.