On the ecology and explorations of the fisheries of an East African rift valley lake, Part 1: On the bionomics and population structure of Tilapia nilotica Linnaeus 1757 in Lake Baringo, Kenya

An ecological survey of the fisheries of Lake Baringo, Kenya was carried out between August, 1972 and August, 1973. The bionomics and population structure of T. nilotica is described. Sampling was done with multifilament gillnets of graded mesh sizes from 51 mm to 178 mm in approximately 12.5 mm increments. The Lake was divided into three sampling and ecologically different zones - the south, central and north zones. The size range of T. nilotica of both sexes caught was between 5 and 27 cm (mode 16 cm) with a mean length of 16.07 cm. For all the collections, males dominated (55.3%) and a higher proportion of males were caught in January, August and November. The smallest mature male and female was 9 and 10 cm respectively. Males grow faster and mature at larger sizes than females. 50% of all males and females mature at 17.4 and 16:4 cm respectively. The periods of intense spawning were between August and October and January to April. The Tilapia were feeding best in central and north zones and the feeding intensity was reduced in January. Two endoparasites Contracaecum sp. and Clinostomum sp. were isolated from the Tilapia. The "condition" of the fish was better in the north than in the other two zones.

ECOLOGY AND BEHAVIOR OF WILD BLACK-CRESTED GIBBONS (HYLOBATES-CONCOLOR) IN CHINA WITH A RECONSIDERATION OF EVIDENCE FOR POLYGYNY

The black-crested gibbon, Hylobates concolor, is one of the few species of gibbons that has not yet been the subject of a long term field study. Field observations in the Ai Lao and Wu Liang Mountains of Yunnan Province, China indicate that in this area the habitat and ecology of this species differ markedly from those of other gibbons that have been studied to date. These differences are correlated with some behavioral differences. In particular, these gibbons apparently have greater day ranges than other gibbons. It has also been suggested that this species lives in polygynous groups. To demonstrate this requires observation of groups with two or more females with young. Our own observations and those from other recent studies suggest that there are alternative explanations consistent with available data.

REPORT ON THE DISTRIBUTION, POPULATION, AND ECOLOGY OF THE YUNNAN SNUB-NOSED MONKEY (RHINOPITHECUS-BIETI)

The Yunnan snub-nosed monkey (Rhinopithecus bieti), an endangered species in China, has received more protection in theory than in practice. Therefore it is on the very verge of extinction. The population of the species was estimated less than 2,000 individuals spread in 19 distinct groups. It was confirmed that the monkey was confined to the Yunling Mountain System, the area between the Yangtze River (Changjiang, aka Jinshajiang) to the east and the Mekong River (Lancangjiang) to the west. We further concluded that a lowland belt to the east, about 100 km long and 20 - 30 km wide was not suitable habitat for the monkeys, and appeared to serve as the natural ecogeologic barrier for the species. Our results indicated that the southern limit of the distribution was at Longma (26-degrees 14'N), and that the northern limit of the distribution was at Xiaochangdu (29-degrees 20'N). The distribution area of the species was substantially smaller than previously estimated. There were substantial ecological differences between the southern and northern parts of the species range. The monkey was found only in fir-larch forest.

Industrial ecology at factory level - A conceptual model

Growing environmental concerns caused by natural resource depletion and pollution need to be addressed. One approach to these problems is Sustainable Development, a key concept for our society to meet present as well as future needs worldwide. Manufacturing clearly has a major role to play in the move towards a more sustainable society. However it appears that basic principles of environmental sustainability are not systematically applied, with practice tending to focus on local improvements. The aim of the work presented in this paper is to adopt a more holistic view of the factory unit to enable opportunities for wider improvement. This research analyses environmental principles and industrial practice to develop a conceptual manufacturing ecosystem model as a foundation to improve environmental performance. The model developed focuses on material, energy and waste flows to better understand the interactions between manufacturing operations, supporting facilities and surrounding buildings. The research was conducted in three steps: (1) existing concepts and models for industrial sustainability were reviewed and environmental practices in manufacturing were collected and analysed; (2) gaps in knowledge and practice were identified; (3) the outcome is a manufacturing ecosystem model based on industrial ecology (IE). This conceptual model has novelty in detailing IE application at factory level and integrating all resource flows. The work is a base on which to build quantitative modelling tools to seek integrated solutions for lower resource input, higher resource productivity, fewer wastes and emissions, and lower operating cost within the boundary of a factory unit. © 2012 Elsevier Ltd. All rights reserved.

Industrial ecology at factory level: A prototype methodology

The concept of sustainable manufacturing is a form of pollution prevention that integrates environmental considerations in the production of goods while focusing on efficient resource use. Taking the industrial ecology perspective, this efficiency comes from improved resource flow management. The assessment of material, energy and waste resource flows, therefore, offers a route to viewing and analysing a manufacturing system as an ecosystem using industrial ecology biological analogy and can, in turn, support the identification of improvement opportunities in the material, energy and waste flows. This application of industrial ecology at factory level is absent from the literature. This article provides a prototype methodology to apply the concepts of industrial ecology using material, energy and waste process flows to address this gap in the literature. Various modelling techniques were reviewed and candidates selected to test the prototype methodology in an industrial case. The application of the prototype methodology showed the possibility of using the material, energy and waste resource flows through the factory to link manufacturing operations and supporting facilities, and to identify potential improvements in resource use. The outcomes of the work provide a basis to build the specifications for a modelling tool that can support those analysing their manufacturing system to improve their environmental performance and move towards sustainable manufacturing. © IMechE 2012.

An integrated service-device-technology roadmap for smart city development

Firms and other organizations use Technology Roadmapping (TRM) extensively as a framework for supporting research and development of future technologies and products that could sustain a competitive advantage. While the importance of technology strategy has received more attention in recent years, few research studies have examined how roadmapping processes are used to explore the potential convergence of products and services that may be developed in the future. The aim of this paper is to introduce an integrated roadmapping process for services, devices and technologies capable of implementing a smart city development R&D project in Korea. The paper applies a QFD (Quality Function Deployment) method to establish interconnections between services and devices, and between devices and technologies. The method is illustrated by a detailed case study, which shows how different types of roadmap can be coordinated with each other to produce a clear representation of the technological changes and uncertainties associated with the strategic planning of complex innovations. © 2012 Elsevier Inc.

Comparative analysis of carbonization drivers in China's megacities

This study investigates the key drivers affecting emission increases in terms of population growth, economic growth, industrial transformation, and energy use in six Chinese megacities: Beijing, Shanghai, Tianjin, Chongqing, Guangzhou, and Hong Kong. The six cities represent the most-developed regions in China and they have similar per capita carbon dioxide (CO 2) emissions as many developed countries. There is an urgent need to quantify the magnitude of each factor in driving the emissions changes in those cities so that a potential bottom-up climate mitigation policy design at the city and sectoral levels can be initiated. We adopt index decomposition analysis and present the results in both additive and multiplicative approaches to reveal the absolute and relative levels of each factor in driving emission changes during 1985-2007. Among all cities, economic effect and energy intensity effect have always been the two dominant factors contributing to the changes in carbon emissions. This study reveals that there are large variations in the ways driving forces contribute to emission levels in different cities and industrial sectors. © 2012 by Yale University.

Ecology of macrozoobenthic communities in two plateau lakes of Southwest China

Ecological studies on macrozoobenthos were conducted in two small plateau lakes in the Yunnan-Guizhou Plateau, Southwest China: Xingyun Lake (XL), a eutrophic lake whose main source of primary production was phytoplankton (Chl a=99.76 +/- 24.01 mu g/L), and Yangzong Lake (YL), a mesotrophic lake. Sampling was carried out from October 2002 to May 2004. Altogether 23 benthic taxa were identified in XL and 21 taxa in YL. The density of benthos in XL was much lower than that in YL, but the biomass was about equal in the two lakes, being 1 423 ind/m(2) and 8.71 g/m(2) in XL and 4 249 ind/m(2) and 8.60 g/m(2) in YL. The dominant species were Limnodrilus hoffmeisteri, Branchiura sowerbyi, Aulodrilus pluriseta and Chironomus sp. in XL and Limnodrilus hoffmeisteri, Aulodrilus pluriseta and Bellamya sp. in YL. Seasonal fluctuation occurred, showing richer species in summer and winter, but the density and biomass varied in different ways in the two lakes. Analyses on functional feeding groups indicate that collector-gatherers were predominant, but the relative abundances of other groups were different. Stepwise multiple regression analysis demonstrated that the water depth, conductivity and chlorophyll a were the key factors affecting macrozoobenthic abundance in the lakes.

City versus national energy use: implications for urban energy policy and strategies

The global trend towards urbanization means that over half of the world's population now lives in cities. Cities use energy in different proportions to national energy use averages, typically corresponding to whether a country is industrialized or developing. Cities in industrialized countries tend to use less energy per capita than the national average while cities in developing countries use more. This paper looks at existing World Bank data in respect to urban energy consumption, the emissions inventory work done by New York City, and discusses how this data highlights the need for a focus on: energy policy for buildings in industrialized cities; masterplanning and new construction standards in developing cities; and how urban energy policy can become more effective in reducing urban greenhouse gas emissions.

Briefing: Re-Engineering the City 2020-2050 - Urban Foresight and Transition Management

Cities may be responsible for up to 70% of global carbon emissions and 75% of global energy consumption and by 2050 it is estimated that 70% of the world's population could live in cities. The critical challenge for contemporary urbanism, therefore, is to understand how to develop the knowledge, capacity and capability for public agencies, the private sector and multiple users in city regions systemically to re-engineer their built environment and urban infrastructure in response to climate change and resource constraints. Re-Engineering the City 2020-2050: Urban Foresight and Transition Management (Retrofit 2050) is a major new interdisciplinary project funded under the Engineering and Physical Science Research Council's (EPSRC) Sustainable Urban Environments Programme which seeks to address this challenge. This briefing describes the background and conceptual framing of Retrofit 2050 project, its aims and objectives and research approach.

Genetic fingerprinting of plankton community provides new insights into aquatic ecology

Over the past two decades, molecular techniques have been widely used in ecological study and molecular ecology has been one of the most important branches of ecology. Meanwhile, genetic fingerprinting analyses have significantly enhanced our knowledge of the diversity and evolutionary relations of the planktonic organisms. Compared with conventional approaches in ecological study (e. g. morphological classification), genetic fingerprinting techniques are simpler and much more effective. This review provides an overview of the principles, advantages and limitations of the commonly used DNA fingerprinting techniques in plankton research. The aim of this overview is to assess where we have been, where we are now and what the future holds for solving aquatic ecological problems with molecular-level information.

Land-cover changes in an urban lake watershed in a mega-city, Central China

Urbanization can exert a profound influence on land covers and landscape characteristics. In this study, we characterize the impact of urbanization on land cover and lacustrine landscape and their consequences in a large urban lake watershed, Donghu Lake watershed (the largest urban lake in China), Central China, by using Landsat TM satellite images of three periods of 1987, 1993 and 1999 and ground-based information. We grouped the land covers into six categories: water body, vegetable land, forested land, shrub-grass land, open area and urban land, and calculated patch-related landscape indices to analyze the effects of urbanization on landscape features. We overlaid the land cover maps of the three periods to track the land cover change processes. The results indicated that urban land continuously expanded from 9.1% of the total watershed area in 1987, to 19.4% in 1993, and to 29.6% in 1999. The vegetable land increased from 7.0% in 1987, 11.9% in 1993, to 13.9% in 1999 to sustain the demands of vegetable for increased urban population. Concurrently, continuous reduction of other land cover types occurred between 1987 and 1999: water body decreased from 30.4% to 23.8%, and forested land from 33.6% to 24.3%. We found that the expansion of urban land has at least in part caused a decrease in relatively wild habitats, such as urban forest and lake water area. These alterations had resulted in significant negative environmental consequences, including decline of lakes, deterioration of water and air quality, and loss of biodiversity.