Efeito de reagentes de branqueamento na classificação e refinação de polpa de eucalipto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Remoção do ácido mefenâmico em água utilizando carvão ativado em pó, lama vermelha e oxidação com cloro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Equilíbrio eletrolítico como estratégia nutricional para prevenir queda no desempenho de poedeiras comerciais em condições de alta temperatura

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Molecular design of new P3HT derivatives: Adjusting electronic energy levels for blends with PCBM

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural and Electrochemical Properties of Lutetium Bis-Octachloro-Phthalocyaninate Nanostructured Films. Application as Voltammetric Sensors

Thin films of the bis[2,3,9,10,16,17,23,24-octachlorophthalocyaninate] lutetium(III) complex (LuPc2Cl32) have been prepared by the Langmuir-Blodgett and the Langmuir-Schaefer (LS) techniques. The influence of the chlorine substituents in the structure of the films and in their spectroscopic, electrochemical and sensing properties has been evaluated. The pi-A isotherms exhibit a monolayer stability greater than the observed in the unsubstituted analogue (LuPc2), being easily transferred to solid substrates, also in contrast to LuPc2. The LB and LS films present a linear growth forming stratified layers, monitored by UV-VIS absorption spectroscopy. The latter also revealed the presence of LuPc2Cl32 in the form of monomers and aggregates in both films. The FTIR data showed that the LuPc2Cl32 molecules present a non-preferential arrangement in both films. Monolayers of LB and LS were deposited onto 6 nm Ag island films to record surface-enhanced resonance Raman scattering (SERRS), leading to enhancement factors close to 2 x 10(3). Finally, LB and LS films deposited onto ITO glass have been successfully used as voltammetric sensors for the detection of catechol. The improved electroactivity of the LB and LS films has been confirmed by the reduction of the overpotential of the oxidation of catechol. The enhancement of the electrocatalytic effect observed in LB and LS films is the result of the nanostructured arrangement of the surface which increases the number of active sites. The sensors show a limit of detection in the range of 10(-5) mol/L.

Trimming and washing poultry carcass to reduce microbial contamination: A comparative study

The objective of this study was to compare the efficiency of washing and trimming broiler carcasses to reduce bacterial contamination. At the poste-visceration site, 100 broiler carcasses were collected during 4 visits to a slaughterhouse in Santa Catarina State, Brazil. Birds were from the same flock, age, and approximately 2.4 kg of weight. Groups were as follows: group 1, with fecal contamination; group 2, without fecal contamination; group 3, with fecal contamination and trimmed; group 4, with fecal contamination and washed; group 5, with fecal contamination, and washed and trimmed. Carcass washings were performed with at least 1.5 L/bird of potable water (0.5 to 1 mg/kg of residual chlorine) at room temperature (20-25 degrees C) using spray cabinets with 44 spray nozzles distributed into 2 chambers (pressure of 2 kgf/cm(2) and 4 kgf/cm(2)). Washed carcasses (trimmed or not) showed significantly (P < 0.05) lower counts of aerobic mesophiles (plate count agar) on the third evaluation, and even lower (P < 0.01) counts for total coliforms (CT) and fecal coliforms (Escherichia coli). Trimmed carcasses showed significantly lower counts (P < 0.05) for plate count agar; however, we observed higher counts for E. coli (P < 0.05). The association of both treatments (washing and trimming) showed significantly higher (P < 0.05) counts for coliforms (CT and E. coli). We can conclude that the washing method is overall more efficient than the trimming method to decontaminate chicken carcasses at the postevisceration site. Hopefully, our findings can help poultry companies to minimize production costs by applying the washing method for carcass decontamination.

Estudo da qualidade da água distribuída pelo poço artesiano da FEG em relação à água servida pelo abastecimento público de Guaratinguetá

We conducted a study of the quality of water distributed by Artesian Well in relation to water supply served by the public for purposes of human consumption of UNESP Campus Guaratinguetá. Two sections of the network were randomly chosen and monitored for 105 days: the stretch of the pipeline started off the Water Treatment Station of the Autonomous Service of Water, Sewage and waste in the Municipality of Guaratinguetá and ended in a point consumption of the Child Family Center, while the section B began at the output of an artesian well and finished in a point of consumption of the Department of Civil Engineering. It is the deterioration of water quality in parts A and B, through comparative analysis of Bicarbonates, Total Hardness, Total Iron, free residual chlorine, pH, Total Residual, Turbidity, Conductivity, Color, Fecal Coliforms and Total Coliforms. Among the observations that can be highlighted: the Total Hardness was found in highest concentration in the extract; for Total Iron significant variations were obtained for both parts, and reduction of this parameter in two points of consumption analyzed, not the expected increase concentration, because the contact of water along the pipe, the CRL showed significant depletion to section A, which can be related to impurities in the water, the presence of biofilm on the walls of pipes, or because this is the stretch of greater extent to be covered by water for pH, this indicated that the water is alkaline and slightly acidic stretch in section B; Turbidity was found for the higher concentration to the passage, and a considerable reduction of this parameter at point consumption due to deposition of particulate matter along the stretch, the conductivity also showed a higher concentration in the extract, as well as an increase in this parameter at the point of consumption. Upon leaving ... (Complete abstract click electronic access below)

Otimização da extração alcalina com peróxido de hidrogênio em seqüência de branqueamento com aplicação de baixo fator kappa

The new market, focused on sustainability and other environmental concerns, refers to innovations that seek alternative forms of production. In pulp and paper bleaching alternative reagents are studied, for example, hydrogen peroxide, in partial substitution of chlorine dioxide in order to reduce the formation of organochlorines. In this context, this study examined the burden of hydrogen peroxide (H2O2) on alkaline extraction stage (stage Ep) required for the bleaching of pulp with eucalyptus kraft pulp, pre-oxygen delignified to obtain equivalent brightness at 90 ± 0.5% ISO, as well as its effect on quality of pulp produced. The pulp was bleached by the sequence D(Ep)DP, with the application of factor kappa of 0.14 and varying the concentration of hydrogen peroxide in Ep stage three, five, seven and nine kilograms of reagent per ton of pulp absolutely drought. The final P stage was optimized with the use of six, nine and twelve pounds of hydrogen peroxide per ton of absolutely dry pulp to achieve the required brightness. The quality of the pulp produced was analyzed based on the kappa number, the brightness and the viscosity. The methods were performed according to standards set by the standard TAPPI (Technical Association of the Pulp and Paper Industry). The best result was obtained using the following D0Ep(7)D1P(6), which showed a viscosity of 19.9 cP, 89.6% ISO brightness, consumption of 94.9 kg / t of reagents and reagent costs of US$ 28.15, because it showed better pulp quality for a lower cost compared to the others. It was found that the greater the amount of hydrogen peroxide in alkaline extraction, the lower the kappa number and increased the amount of residual hydrogen peroxide. The higher the charge of hydrogen peroxide in Ep stage, the lower the need for hydrogen peroxide in the final P stage, reducing the cost of bleaching

Avaliação do Efeito Fotodinâmico sobre o Crescimento in vitro de Pythium insidiosum

Photodynamic Therapy (PDT) is a therapeutic method which employs a photosensitizer and light to cause cellular death. The chemical compounds have low or none toxicity for hosts cells. Under the incidence of light, in an appropriated wavelength, these chemical compounds produce reactive oxygen which affects the biomolecules of the target-cells. The specific illumination of the affected area increases the selectivity of the therapy, since the photodynamic process occurs only in the irradiated area. Pythiosis, for instance, is a life-threatening emerging disease caused by a fungus-like organism called Pythium insidiosum. The disease occurs in man and other animals, being mostly observed in horses. Human pythiosis may present as ophthalmic, cutaneous-subcutaneous and systemic forms of lesions. Due to the fact that P. insidiosum is not a true fungus, it is refractory to most antifungal drugs and the treatment of the disease is difficult. Extensive surgery procedures, such as limb amputation, are the treatment of choice, however relapses may occur frequently. Although not totally effective, the use of immunotherapy associated to surgery have shown some results. Considering that pythiosis is an emerging disease few explored in its etiological and therapeutic aspects, which are limited and few effective, it is of great importance to encourage the development of researches for new strategies of treatment. In this sense, it was evaluated the effect of PDT on in vitro growth of the pathogen employing two chemical compounds as photosensitizer, porphyrin and chlorine, at different concentrations in combination with several energetic dosages. Porphyrin showed inhibition of growth at 25mg/mL with 100J/cm2 of energetic dosage and chlorine showed similar results employing low concentrations (0,7, 1,0 and 1,3mg/mL) with 70J/cm2 of energetic dosage... (Complete abstract click electronic access below)

Produção de polpa solúvel a partir de Eucalyptus urograndis

The wood of the gender Eucalyptus occupies a prominence place in relation to other cellulose sources, due to its chemical composition, its low cost, abundance and availability. The dissolving pulp obtaining occurs basically starting from three stages: prehydrolysis of the wood following by cooking and finally by the bleaching process. In the dissolving pulp production is necessary a pretreatment stage for the hemicelluloses removal. Among the chemical cooking processes, the Kraft process is the most used for cellulosic pulps production starting from eucalyptus, in the additive presence or not. The anthraquinone uses in the pulping process has as main purposes increasing the delignification rate as well as protecting the pulp regarding the degradation of the polysaccharide chains. The ECF bleaching process consists of the purification of the pulp through bleaching agents, being excepted the elementary chlorine. The dissolving pulp is a pulp of high a-cellulose content and purity destined to the cellulose derivatives production as carboxymethyl cellulose, nitrocellulose and microcrystalline cellulose. The production of a certain product, as well as its final application, is determined by the chemical properties of the pulp. The present work had as purpose producing cellulosic pulp with kappa number around 9 destined to the production of dissolving pulp in way to evaluate the use of the anthraquinone (AQ) in the Kraft process according to the chemical properties of the obtained pulps. It has been still intended developing an effective technology of bleaching for the high purity and quality dissolving pulp production. The prehydrolysis was accomplished in laboratory rotational autoclave for 30 minutes at 170ºC in the water:wood rate 3,5:1 (L:kg). The Kraft/AQ pulping were accomplished in laboratory rotational autoclave being initially modified the active alkali load (10, 13, 16 and 19%) at sulfidity of 25% ...

Transmission enhancement in chalco-halide glasses for multiband applications

The potential of clear Ga2S3-GeS2-CsCl based sulfide glasses transparent up to 11.5 μm to be used as new optical material for multispectral applications has been investigated. The addition of large amount of chlorine ions – above 40 mol.% of CsCl – into the chalcogenide vitreous network in order to produce colorless glasses results in a drastic increase of their water contamination. We report for the first time, to the best of our knowledge, the purification of cesium chloride CsCl by dynamic distillations under vacuum in order to reduce water and hydroxyl group contamination before complete melting of the glass. Besides, sulfur purification by dynamic and static distillations was also performed in the implemented method. The obtained glasses were then characterized by UV-visible and infrared (FTIR) spectroscopies, by electron probe microanalysis (EPMA), thermal analysis (DSC), and their refractive indices in the visible and near infrared ranges were also measured. A large improvement of the glass transmission spectrum has been achieved with an estimated reduction of about 45 times of the OH and H2O content and 60 times of the SH content. The glass thermal molding ability and chemical durability with and without protective coating have been tested to probe their potential for fabrication of complex optics.

Degradação de efluentes da indústria têxtil pelo processo eletrolítico e avaliação ecotoxicológica em diferentes níveis tróficos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da remoção de sulfametoxazol, diclofenaco e 17β-estradiol em água por meio de processo oxidativo com cloro

Pós-graduação em Engenharia Civil - FEIS

Desenvolvimento de sensores eletroquímicos e métodos de extração em fase sólida baseados em sistemas biomiméticos para análise de poluentes ambientais

Pós-graduação em Química - IQ

Associação entre variáveis climáticas e qualidade da água para consumo humano por meio de técnicas multivariadas

Pós-graduação em Agronomia (Energia na Agricultura) - FCA