Effects of calcining conditions on the microstructure of sugar cane waste ashes (SCWA): Influence in the pozzolanic activation

in this paper a study of calcining conditions on the microstructural features of sugar cane waste ash (SCWA) is carried out. For this purpose, some microparticles (< 90 mu m) of sugar cane straw ash and sugar cane bagasse ash of samples calcined at 800 degrees C and 1000 are studied by combining the bright field and the dark field images with the electron diffraction patterns in the transmission electron microscopy (TEM). It is appreciated that the morphology and texture of these microparticles change when silicon or calcium are present. Furthermore, it is observed that iron oxide (magnetite Fe(3)O(4)) is located in the calcium-rich particles. The microstructural information is correlated with the results of a kinetic-diffusive model that allows the computing of the kinetic parameters of the pozzolanic reaction (mainly the reaction rate constant). The results show that the sugar cane wastes ash calcined at 800 and 1000 degrees C have properties indicative of high pozzolanic activity. The X-ray diffraction patterns, the TEM images and the pozzolanic activity tests show the influence of different factors on the activation of these ashes. (c) 2008 Elsevier Ltd. All rights reserved.

Geophysical investigation using resistivity and GPR methods: a case study of a lubricant oil waste disposal area in the city of Ribeiro Preto, So Paulo, Brazil

Geophysics has been shown to be effective in identifying areas contaminated by waste disposal, contributing to the greater efficiency of soundings programs and the installation of monitoring wells. In the study area, four trenches were constructed with a total volume of about 25,000 m(3). They were almost totally filled with re-refined lubricating oil waste for approximately 25 years. No protection liners were used in the bottoms and laterals of the disposal trenches. The purpose of this work is to evaluate the potential of the resistivity and ground penetrating radar (GPR) methods in characterizing the contamination of this lubricant oil waste disposal area in Ribeiro Preto, SP, situated on the geological domain of the basalt spills of the Serra Geral Formation and the sandstones of the Botucatu Formation. Geophysical results were shown in 2D profiles. The geophysical methods used enabled the identification of geophysical anomalies, which characterized the contamination produced by the trenches filled with lubricant oil waste. Conductive anomalies (smaller than 185 Omega m) immediately below the trenches suggest the action of bacteria in the hydrocarbons, as has been observed in several sites contaminated by hydrocarbons in previously reported cases in the literature. It was also possible to define the geometry of the trenches, as evidenced by the GPR method. Direct sampling (chemical analysis of the soil and the water in the monitoring well) confirmed the contamination. In the soil analysis, low concentrations of several polycyclic aromatic hydrocarbons (PAHs) were found, mainly naphthalene and phenanthrene. In the water samples, an analysis verified contamination of the groundwater by lead (Pb). The geophysical methods used in the investigation provided an excellent tool for environmental characterization in this study of a lubricant oil waste disposal area, and could be applied in the study of similar areas.

Decolourisation of real textile waste using electrochemical techniques: Effect of electrode composition

The present paper presents the study of the decolourisation of real textile effluent by constant current electrolysis in a flow-cell using a DSAO type material. The effect of using different anode materials (Ti/Ru0.3Ti0.7O2; Ti/Ir0.3Ti0.7O2; Ti/RuxSn1-xO2, where X = 0.1, 0.2 or 0.3) on the efficiency of colour removal is discussed. Attempts to perform galvanostatic oxidation (40 and 60 mA cm(-2)) on the as-received effluent demonstrate that colour removal and total organic carbon (TOC) removal are limited. In this case the greatest degree of colour removal is achieved when anode containing 90% SnO2 is used. If the conductivity of the effluent is increased by adding NaCl (0.1 mol L-1) appreciable colour/TOC removal is observed. The efficiencies of colour and TOC removal are discussed in terms of the energy per order (E-EO/kWhm(-3) order(-1)) and energy consumption (E-C/kW h kg(-1) TOC), respectively. Finally, the extent of colour removal is compared to consent levels presented in the literature. (C) 2008 Elsevier B.V. All rights reserved.

Structure and Applications of a Rhamnolipid Surfactant Produced in Soybean Oil Waste

Soybean oil soapstock was utilized as an alternative carbon source for the production of rhamnolipids by Pseudomonas aeruginosa LBI strain. The chemical composition and properties of the rhamnolipid mixture obtained were determined to define its potential applications. The chemical characterization of the rhamnolipid has revealed the presence of ten different homologues. The monorhamnolipid RhaC(10)C(10) and the dirhamnolipid Rha(2)C(10)C(10) were the main components of the mixture that showed predominance of 44% and 29%, respectively, after 144-h of cultivation. The biosurfactant was able to form stable emulsions with several hydrocarbons and showed excellent emulsification for soybean oil and chicken fat (100%). The rhamnolipid removed 67% of crude oil present in sand samples and presented antimicrobial activity against Bacillus cereus and Mucor miehei at 64 mu g/mL and inhibition of Neurospora crassa, Staphylococcus aureus, and Micrococcus luteus at 256 mu g/mL. The results demonstrated that the rhamnolipid produced in soybean oil soapstock can be useful in environmental and food industry applications.

Attribution i moral och etik : hur tillskriver människor orsaker till beteenden?

Rapporten handlar om hur människor attribuerar, det vill säga tillskriver, orsaker till beteenden i moralbaserade situationer och om det finns skillnad i hur män och kvinnor attribuerar beteenden. För att undersöka hur människor attribuerar har man i denna undersökning låtit män och kvinnor göra bedömningar om varför man själv eller ”någon av samma ålder och kön” gör som de gör i specifika situationer. Detta gjordes i en enkät innehållande två situationer med vardera fyra orsaker som rangordnas efter hur troliga de är som anledning till vad som hände i situationen. Enligt resultaten finns det en signifikant skillnad i hur människor attribuerar beteenden men det beror på vilken situation de befinner sig i. Resultaten påvisar inte någon signifikant skillnad i hur män och kvinnor attribuerar sitt och andras beteenden.

Calucaltion of waste heat from hot rolled steel coils at SSAB and its recovery

Hot rolling process is heat input process. The heat energy in hot rolled steel coils can be utilized. At SSAB Strip Product Borlänge when the hot rolled steel coils came out of the hot rolling mill they are at the temperature range of 500°C to 800°C. Heat energy contained by the one hot rolled steel coil is about 1981Kwh whereas the total heat energy for the year 2008 is 230 GWh/year.The potential of heat is too much but the heat dissipation rate is too slow. Different factors on which heat dissipation rate depends are discussed.Three suggestions are proposed to collect the waste heat from hot rolled steel coils.The 2nd proposal in which water basin is suggested would help not only to collect the waste heat but to decrease in the cooling time.

Mapping Attribution Metadata to the Open Provenance Model

A description of a data item's provenance can be provided in dierent forms, and which form is best depends on the intended use of that description. Because of this, dierent communities have made quite distinct underlying assumptions in their models for electronically representing provenance. Approaches deriving from the library and archiving communities emphasise agreed vocabulary by which resources can be described and, in particular, assert their attribution (who created the resource, who modied it, where it was stored etc.) The primary purpose here is to provide intuitive metadata by which users can search for and index resources. In comparison, models for representing the results of scientific workflows have been developed with the assumption that each event or piece of intermediary data in a process' execution can and should be documented, to give a full account of the experiment undertaken. These occurrences are connected together by stating where one derived from, triggered, or otherwise caused another, and so form a causal graph. Mapping between the two approaches would be benecial in integrating systems and exploiting the strengths of each. In this paper, we specify such a mapping between Dublin Core and the Open Provenance Model. We further explain the technical issues to overcome and the rationale behind the approach, to allow the same method to apply in mapping similar schemes.

Wasted: understanding the economic and social impact of food waste

Over one-third of global food production goes to waste while over 850million people are fighting chronic hunger. The United States is the world’s largest food waster. One third of America’s food with an economic value of US$161 billion is wasted and less than 7% is recycled. American food waste ends up in landfills creating powerful methane gas emissions. South Korea, on the other hand, has implemented the world’s strictest food waste laws, and today diverts 93% of wasted food away from landfills turning such waste into powerful economic opportunities. This Master Thesis investigates the reasons behind global food waste by comparing South Korea and the US. It explores what these two nations are doing to address their respective food waste problems, South Korea successfully, the US not. The paper looks at the two countries’ respective policies and national characteristics, which impact decision-making and recycling processes. The effort concludes that South Korea has embarked on a necessary paradigm shift turning food waste into powerful economic drivers leading to a sharp decline in food waste. In the US, food waste continues to be a major problem without a national strategy to remedy waste. Any effort in the US, while laudable, is sporadic and local, and hence the US misses out on possibly important economic growth opportunities.

Food waste in lower-middle income households: a qualitative analysis of antecedents and a typology of food wasters

Esta dissertação doutoral, com base em dados empíricos coletados com 50 mães distribuídas no Brasil (n = 30) e nos EUA (n = 20), tem como objetivo fornecer uma melhor compreensão do desperdício de alimento no contexto da baixa renda. A tese é composta por três artigos, que combinados, cumprem os objetivos de identificar os antecedentes do desperdício de alimento e delinear uma tipologia dos desperdiçadores de alimento. Adicionalmente, contextualiza o desperdício global e um capítulo propõe uma agenda futura para estudos sobre desperdício de alimento no âmbito do consumidor. O desperdício de alimento nas famílias, enquanto tema de pesquisa, oferece a oportunidade para o trabalho acadêmico em marketing cumprir os critérios de relevância social, gerencial e para políticas públicas. No primeiro estudo, descrevem-se os fatores do chamado "paradoxo do desperdício de alimento", a identificação e análise do desperdício de alimento em famílias com restrições orçamentárias, enquanto apresentam-se o itinerário do consumo de alimentos e os antecedentes do desperdício. Este primeiro artigo, elaborado com dados coletados em famílias brasileiras, ilustra também o papel das normas culturais, tais como o preparo abundante de alimento para mostrar hospitalidade ou como forma de não ser percebido como pobre, no aumento do desperdício. No segundo artigo, uma grounded-theory (teoria fundamentada nos dados) destaca o papel do afeto e da abundância no desperdício de alimento familiar. Para enriquecer as contribuições teóricas, este segundo estudo apresenta um framework com seis dimensões do desperdício de alimento (1. Afeto; 2. Abundância; 3. Multiplicidade de escolhas; 4. Conveniência; 5. Procrastinação; 6. Rotina sem planejamento). Baseado em dados empíricos coletados em famílias americanas, este estudo proporciona novas explicações, a exemplo de como o estoque abundante de comfort foods - uma forma de impulsionar tanto emoções positivas para si quanto mostrar afeto para crianças – pode gerar mais desperdício de alimentos. Em síntese, o segundo artigo identifica uma consequência negativa do afeto e da abundância de alimentos no contexto familiar, e apresenta um framework teoricamente relevante. Finalmente, o terceiro artigo, a partir do conjunto de dados dos estudos anteriores e de nova coleta com dez famílias, propõe uma tipologia comportamental do desperdício de alimento, uma contribuição original aos estudos de comportamento do consumidor. A identificação de cinco tipos de desperdiçadores de alimentos - (1) Mães carinhosas; (2) Cozinheiras abundantes; (3) Desperdiçadoras de sobras; (4) Procrastinadoras; (5) Mães versáteis - contribui para a teoria, enquanto implicações potenciais para educadores nutricionais e agentes públicos são exploradas a partir dos resultados. Como uma forma de explicar as características de cada um dos cinco tipos identificados, compara-se aspectos das amostras brasileira e norte-americana, que apresentam similaridades no comportamento de desperdício de alimento. Os níveis de desperdício percebidos por país também são comparados. Em suma, os achados dos três artigos podem contribuir para maximizar os resultados de campanhas de conscientização voltadas à mitigação do desperdício de alimento, e apresentam ideias para varejistas interessados em iniciativas de sustentabilidade. Mais abrangentemente, os resultados apresentados também podem ser aplicados para incrementar programas de combate à fome e projetos de educação nutricional realizados pelo setor público ou ONGs.

Construction and demolition waste as a source of PVC for recycling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Elaboration of sausage using minced fish of Nile tilapia filleting waste

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Digestive and functional properties of a partially hydrolyzed cassava solid waste with high insoluble fiber concentration

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Applicability of the use of waste from different banana cultivars for the cultivation of the oyster mushroom

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Case study: a 3D resistivity and induced polarization imaging from downstream a waste disposal site in Brazil

A contaminated site from a downstream municipal solid waste disposal site in Brazil was investigated by using a 3D resistivity and induced polarization (IP) imaging technique. This investigation purpose was to detect and delineate contamination plume produced by wastes. The area was selected based on previous geophysical investigations, and chemical analyses carried out in the site, indicating the presence of a contamination plume in the area. Resistivity model has successfully imaged waste presence (rho < 20 Omega m), water table depth, and groundwater flow direction. A conductive anomaly (rho < 20 Omega m) outside wastes placement was interpreted as a contamination plume. Chargeability model was also able to imaging waste presence (m > 31 mV/V), water table depth, and groundwater flow direction. A higher chargeability zone (m > 31 mV/V) outside wastes placement and following conductive anomaly was interpreted as a contamination plume. Normalized chargeability (MN = m/rho) confirmed polarizable zone, which could be an effect of a salinity increase (contamination plume), and the clay presence in the environment.

Interpretation of Resistivity Piezocone Tests in a Contaminated Municipal Solid Waste Disposal Site

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)