Non-contact test set-up for aeroelasticity in a rotating turbomachine combining a novel acoustic excitation system with tip-timing

Due to trends in aero-design, aeroelasticity becomes increasingly important in modern turbomachines. Design requirements of turbomachines lead to the development of high aspect ratio blades and blade integral disc designs (blisks), which are especially prone to complex modes of vibration. Therefore, experimental investigations yielding high quality data are required for improving the understanding of aeroelastic effects in turbomachines. One possibility to achieve high quality data is to excite and measure blade vibrations in turbomachines. The major requirement for blade excitation and blade vibration measurements is to minimize interference with the aeroelastic effects to be investigated. Thus in this paper, a non-contact-and thus low interference-experimental set-up for exciting and measuring blade vibrations is proposed and shown to work. A novel acoustic system excites rotor blade vibrations, which are measured with an optical tip-timing system. By performing measurements in an axial compressor, the potential of the acoustic excitation method for investigating aeroelastic effects is explored. The basic principle of this method is described and proven through the analysis of blade responses at different acoustic excitation frequencies and at different rotational speeds. To verify the accuracy of the tip-timing system, amplitudes measured by tip-timing are compared with strain gage measurements. They are found to agree well. Two approaches to vary the nodal diameter (ND) of the excited vibration mode by controlling the acoustic excitation are presented. By combining the different excitable acoustic modes with a phase-lag control, each ND of the investigated 30 blade rotor can be excited individually. This feature of the present acoustic excitation system is of great benefit to aeroelastic investigations and represents one of the main advantages over other excitation methods proposed in the past. In future studies, the acoustic excitation method will be used to investigate aeroelastic effects in high-speed turbomachines in detail. The results of these investigations are to be used to improve the aeroelastic design of modern turbomachines.

Integrating life design counseling and psychotherapy: Possibilities and practices.

The debate on the relation between career counseling and psychotherapy revealed the close relation between psychosocial and career issues. The connection between these two approaches paves the way for the integration of career counseling into psychotherapy. One of the key challenges of integrating career counseling into psychotherapy is to avoid discontinuities and inconsistencies in the psychotherapeutic intervention. The aim of this article is, therefore, to present the Systematic Treatment Selection perspective as a framework for an effective integration of psychotherapy and career counseling. Then, Life Design Counseling is described, highlighting its possibilities to fit the psychotherapeutic approach. Finally, an illustrative case is presented and discussed.

Algebraic geometric codes over rings

The techniques of algebraic geometry have been widely and successfully applied to the study of linear codes over finite fields since the early 1980's. Recently, there has been an increased interest in the study of linear codes over finite rings. In this thesis, we combine these two approaches to coding theory by introducing and studying algebraic geometric codes over rings.

INSPIRAÇÃO NORDESTINA: UMA LEITURA TEOLÓGICA NA POÉTICA DE PATATIVA DO ASSARÉ NA POENTE DO DIÁLOGO ENTRE TEOLOGIA E LITERATURA

Este trabalho se propõe estudar a obra do poeta cearense Antonio Gonçalves da Silva, conhecido como Patativa do Assaré. O estudo de tal obra encontra-se alicerçado na crítica literária, sobretudo no conceito de textos histórica e socialmente ancorados elaborado por Antonio Cândido, e na discussão do diálogo entre teologia e literatura, a partir da idéia de reescritura de um texto literário a partir de textos sagrados, de Eli Brandão. Dessa forma objetiva-se localizar, no contexto brasileiro, a partir do diálogo entre teologia e literatura, a plausibilidade de nossa pesquisa, ou seja: ao longo da produção literária de Patativa do Assaré, encontramos questões existenciais provocadoras de diversas aflições percebidas no cotidiano do povo sertanejo, as quais nos remetem a questionamentos e temas de cunho teológico, notados através da obra de um poeta, reveladora não somente da dura realidade do nordestino, mas também da fé e esperança deste em um Deus, visto ao longo da poética de Patativa do Assaré não como fonte de castigo, mas percebido como um Deus sensível aos sofrimentos, mazelas e marginalização dos nordestinos desamparados. Assim, acreditamos na proposta de estudar a poética patativana sob a perspectiva de “um olhar teológico”, a partir do qual se percebe “temas teológicos nordestinos”, elaborados a partir do contato do poeta com o catolicismo do sertão, mas que, na percepção e compreensão de mundo de Patativa assumem novos significados e novas interpretações.

Class-D audio amplifiers with negative feedback

There are many different designs for audio amplifiers. Class-D, or switching, amplifiers generate their output signal in the form of a high-frequency square wave of variable duty cycle (ratio of on time to off time). The square-wave nature of the output allows a particularly efficient output stage, with minimal losses. The output is ultimately filtered to remove components of the spectrum above the audio range. Mathematical models are derived here for a variety of related class-D amplifier designs that use negative feedback. These models use an asymptotic expansion in powers of a small parameter related to the ratio of typical audio frequencies to the switching frequency to develop a power series for the output component in the audio spectrum. These models confirm that there is a form of distortion intrinsic to such amplifier designs. The models also explain why two approaches used commercially succeed in largely eliminating this distortion; a new means of overcoming the intrinsic distortion is revealed by the analysis. Copyright (2006) Society for Industrial and Applied Mathematics

Dynamically managing sensed context data

This thesis reports on an investigation of the feasibility and usefulness of incorporating dynamic management facilities for managing sensed context data in a distributed contextaware mobile application. The investigation focuses on reducing the work required to integrate new sensed context streams in an existing context aware architecture. Current architectures require integration work for new streams and new contexts that are encountered. This means of operation is acceptable for current fixed architectures. However, as systems become more mobile the number of discoverable streams increases. Without the ability to discover and use these new streams the functionality of any given device will be limited to the streams that it knows how to decode. The integration of new streams requires that the sensed context data be understood by the current application. If the new source provides data of a type that an application currently requires then the new source should be connected to the application without any prior knowledge of the new source. If the type is similar and can be converted then this stream too should be appropriated by the application. Such applications are based on portable devices (phones, PDAs) for semi-autonomous services that use data from sensors connected to the devices, plus data exchanged with other such devices and remote servers. Such applications must handle input from a variety of sensors, refining the data locally and managing its communication from the device in volatile and unpredictable network conditions. The choice to focus on locally connected sensory input allows for the introduction of privacy and access controls. This local control can determine how the information is communicated to others. This investigation focuses on the evaluation of three approaches to sensor data management. The first system is characterised by its static management based on the pre-pended metadata. This was the reference system. Developed for a mobile system, the data was processed based on the attached metadata. The code that performed the processing was static. The second system was developed to move away from the static processing and introduce a greater freedom of handling for the data stream, this resulted in a heavy weight approach. The approach focused on pushing the processing of the data into a number of networked nodes rather than the monolithic design of the previous system. By creating a separate communication channel for the metadata it is possible to be more flexible with the amount and type of data transmitted. The final system pulled the benefits of the other systems together. By providing a small management class that would load a separate handler based on the incoming data, Dynamism was maximised whilst maintaining ease of code understanding. The three systems were then compared to highlight their ability to dynamically manage new sensed context. The evaluation took two approaches, the first is a quantitative analysis of the code to understand the complexity of the relative three systems. This was done by evaluating what changes to the system were involved for the new context. The second approach takes a qualitative view of the work required by the software engineer to reconfigure the systems to provide support for a new data stream. The evaluation highlights the various scenarios in which the three systems are most suited. There is always a trade-o↵ in the development of a system. The three approaches highlight this fact. The creation of a statically bound system can be quick to develop but may need to be completely re-written if the requirements move too far. Alternatively a highly dynamic system may be able to cope with new requirements but the developer time to create such a system may be greater than the creation of several simpler systems.

A formação e o desenvolvimento de arranjos cooperativos sob a ótica da imersão social e da economia dos custos de transação: um estrudo de caso na Coopercam e na Unipesca

The current study analyzes the birth and development of two strategic alliances established between shrimp producers in Rio Grande do Norte: the Unipesca and the Coopercam. To achieve this aim, two approaches which, at first sight, could be considered contradictory were used: the Transactional Costs Economy and Embeddedness. The first approach is fundamentally based in the studies of Williamson (1985; 1991; 1996; 1999; 2000; 2002). Embededness, on the other hand, went through the review of a series of authors, such as Burt (1992), Granovetter (1973; 1985), Uzzi (1997), Gulati (1994; 1995; 1997; 1998; 1999; 2000), Nielsen (2005), Ring (2002), Ring and Van de Ven (1994), Zafirovski (2002), among others. To analyze the birth and development of the cooperatives in this study, Gulati s work (1998) was used. This study shows the steps to be studied for a better comprehension of an alliance: the decision of starting an alliance and the choice of the partners, the decision about the governance structure, the evolution of the alliance and the development of the companies which established this partnership. To carry this study out, a study case accordingly to Yin s proposal (2001) was adopted. Semi-structured interviews with pre-defined plots were conducted in two phases: in the beginning of 2006 and in the beginning of 2007. The subjects from the research were, in 2006, representative members of the main associations and corporations, besides the shrimp producers from the state, when the context of the activity was set. In the second phase, in 2007, representative members from the two cooperatives that were listed above were interviewed the president from Coopercam and the marketing manager from Unipesca. Besides these two members, directors from two important organizations in each of these cooperatives were also interviewed, giving out the necessary information for the research. Secondary data was also collected from the Brazilian Association of Crab producers website, as well as from news from important newspapers in RN, such as Tribuna do Norte. The primary data was analyzed in terms of quality, accordingly to the documental analysis technique. Thus, through the data that was collected, it can be concluded that the reasons that motivated the companies to cooperate can be explained in terms of the transactional costs economy. However, the choice of partners is more connected to aspects approached by the social embededness. When aspects related to development and evolution were analyzed, it could be seen that both aspects from TCE and Embededness were vital to explain the development of the cooperatives mentioned

ENZYME-FREE UBIQUITIN LIGATION. FROM NATIVE CHEMICAL LIGATION AND SPIN LABELING TO DIMERIZATION BY INTER-UBIQUITIN MIMICKING LINKAGE AND PH-DEPENDENT CONFORMATIONAL SWITCH

The delicate balance between the production and disposal of proteins is vital for the changes required in the cell to respond to given stimulus. Ubiquitination is a protein modification with a range of signaling outcomes when ubiquitin is attached to a protein through a highly ordered enzymatic cascade process. Understanding ubiquitination is a growing field and nowadays the application of chemical reactions allows the isolation of quantitative materials for structural studies. Therefore, in this dissertation it is described some of these suitable chemical methodologies to produce an isopeptide bond toward the polymerization of ubiquitin bypassing the enzymatic control with the purpose of showing if these chemical modifications have a direct impact on the structure of ubiquitin. First, the possibility of incorporating non-natural lysine analogs known as mercaptolysines into the polypeptide chain of Ubiquitin was explored when they were attached to ubiquitin by native chemical ligation at its C terminus. The sulfhydryl group was used for the attachment of a paramagnetic label to map the surface of ubiquitin. Second, the condensation catalyzed by silver nitrate was used for the dimer assembly. In particular, the main focus was on examining whether orthogonal protection and deprotection of each monomer have an impact on the reaction yield, since the synthetic strategy has been previously attempted successfully. Third, the formation of ubiquitin dimers was approached by building an inter-ubiquitin linkage mimicking the isopeptide bond with two approaches, the classic disulfide exchange as well as the thiol-ene click reaction by thermal initiation in aqueous conditions. After assembling the dimeric units, they were studied by Nuclear Magnetic Resonance, in order to establish a conformational state profile which depends on the pH conditions. The latter is a very important concept since some ligands have a preferred affinity when the protein-protein hydrophobic patches are in close proximity.

CO2 capture by adsorption in post combustion processes

Global concentration of CO2 in the atmosphere is increasing rapidly. CO2 emissions have huge impact on global climate change. Therefore, efficient CO2 emission abatement strategies such as Carbon Capture and Storage (CCS) are required to combat this phenomenon. There are three major approaches for CCS: - Post-combustion capture; - Pre-combustion capture; - Oxyfuel process. Post-combustion capture offers some advantages in terms of cost as existing combustion technologies can still be used without radical changes on them. This makes post-combustion capture easier to implement as a retrofit option compared to the other two approaches. Therefore, post-combustion capture is probably the first technology that will be deployed on a large scale. The aim of this work is to study the adsorption equilibrium of CO2, CH4 and N2 in zeolite 5A at 40ºC. For this, experiments were performed to determine the isotherms of adsorption of CO2, CH4 and N2 near 40ºC with the conditions of the post-combustion capture processes. It has been found that the 5A zeolite adsorbs a significant quantity of CO2 values of about 5 mol/kg at a pressure of 5 bar.

Modelling and analysis of planar cell polarity

Planar cell polarity (PCP) occurs in the epithelia of many animals and can lead to the alignment of hairs, bristles and feathers; physiologically, it can organise ciliary beating. Here we present two approaches to modelling this phenomenon. The aim is to discover the basic mechanisms that drive PCP, while keeping the models mathematically tractable. We present a feedback and diffusion model, in which adjacent cell sides of neighbouring cells are coupled by a negative feedback loop and diffusion acts within the cell. This approach can give rise to polarity, but also to period two patterns. Polarisation arises via an instability provided a sufficiently strong feedback and sufficiently weak diffusion. Moreover, we discuss a conservative model in which proteins within a cell are redistributed depending on the amount of proteins in the neighbouring cells, coupled with intracellular diffusion. In this case polarity can arise from weakly polarised initial conditions or via a wave provided the diffusion is weak enough. Both models can overcome small anomalies in the initial conditions. Furthermore, the range of the effects of groups of cells with different properties than the surrounding cells depends on the strength of the initial global cue and the intracellular diffusion.

The acquisition of adjunct control: grammar and processing

This dissertation uses children’s acquisition of adjunct control as a case study to investigate grammatical and performance accounts of language acquisition. In previous research, children have consistently exhibited non-adultlike behavior for sentences with adjunct control. To explain children’s behavior, several different grammatical accounts have been proposed, but evidence for these accounts has been inconclusive. In this dissertation, I take two approaches to account for children’s errors. First, I spell out the predictions of previous grammatical accounts, and test these predictions after accounting for some methodological concerns that might have influenced children’s behavior in previous studies. While I reproduce the non-adultlike behavior observed in previous studies, the predictions of previous grammatical accounts are not borne out, suggesting that extragrammatical factors are needed to explain children’s behavior. Next, I consider the role of two different types of extragrammatical factors in predicting children’s non-adultlike behavior. With a new task designed to address the task demands in previous studies, children exhibit significantly higher accuracy than with previous tasks. This suggests that children’s behavior has been influenced by task- specific processing factors. In addition to the task, I also test the predictions of a similarity-based interference account, which links children’s errors to the same memory mechanisms involved in sentence processing difficulties observed in adults. These predictions are borne out, supporting a more continuous developmental trajectory as children’s processing mechanisms become more resistant to interference. Finally, I consider how children’s errors might influence their acquisition of adjunct control, given the distribution in the linguistic input. I discuss the results of a corpus analysis, including the possibility that adjunct control could be learned from the input. The kinds of information that could be useful to a learner become much more limited, however, after considering the processing limitations that would interfere with the representations available to the learner.

Ecological infrastructures in sustainable olive growing: studies about Prays oleae (Bernard) and its natural enemies

Doutoramento em Engenharia Agronómica - Instituto Superior de Agronomia - UL

Horizontal fiscal equity: a theoretical contribution with an application to the portuguese municipalities.

Doutoramento em Economia.

Environnement d’adaptation pour un jeu sérieux

Nous avons développé un jeu sérieux afin d’enseigner aux utilisateurs à dessiner des diagrammes de Lewis. Nous l’avons augmenté d’un environnement pouvant enregistrer des signaux électroencéphalographiques, les expressions faciales, et la pupille d’un utilisateur. Le but de ce travail est de vérifier si l’environnement peut permettre au jeu de s’adapter en temps réel à l’utilisateur grâce à une détection automatique du besoin d’aide de l’utilisateur ainsi que si l’utilisateur est davantage satisfait de son expérience avec l’adaptation. Les résultats démontrent que le système d’adaptation peut détecter le besoin d’aide grâce à deux modèles d’apprentissage machine entraînés différemment, l’un généralisé et l’autre personalisé, avec des performances respectives de 53.4% et 67.5% par rapport à un niveau de chance de 33.3%.

Comparaison populationnelle des résultats périopératoires entre la néphro-urétérectomie ouverte et laparoscopique aux États-Unis

Introduction : La néphro-urétérectomie radicale (NUR) représente le traitement primaire pour les patients atteints d’une tumeur des voies excrétrices supérieures (TVES) non métastatique. Une approche ouverte ou laparoscopique peut être considérée. Malgré la présence de plusieurs études comparant les résultats périopératoires et oncologiques entre ces deux approches, aucunes études se basent sur une cohorte populationnelle. Objectif : Notre but est d’évaluer la morbidité péri-opératoire entre la NUR ouverte et laparoscopique en utilisant une cohorte populationnelle. Méthode : Nous avons utilisé la base de donnée Nationwide Inpatient Sample (NIS) pour identifier tous les patients atteints d’une TVES non métastatique, traités par NUR ouverte ou laparoscopique, entre 1998 et 2009. Au total, 7401 (90,8%) et 754 (9,2%) patients ont subi une NUR ouverte et laparoscopique, respectivement. Dans le but de contrôler les différences inhérentes entre les deux groupes, nous avons utilisé une analyse par appariement sur les scores de propension. Ainsi, 3016 (80%) patients avec NUR ouverte étaient appariés à 754 (20%) patients avec NUR laparoscopique. Intervention : Tous les patients ont subi une NUR. Mesures : Les taux de complications intra-opératoires et post-opératoires, de transfusions sanguines, d’hospitalisation prolongée et de mortalité intrahospitalière ont été mesurés. Des analyses de régression logistique on été utilisées pour notre cohorte, après appariement sur les scores de propension. Résultats et Limitations : Pour les patients traités par approche ouverte vs. laparoscopique, les taux suivants furent calculés : transfusions sanguines : 15 vs. 10% (p<0,001); complications intra-opératoires : 4,7 vs. 2,1% (p=0,002); complications post-opératoires : 17 vs. 15% (p=0,24); durée d’hospitalisation prolongée (≥ 5 jours) : 47 vs. 28% (p<0,001); mortalité intra-hospitalière 1,3 vs. 0,7% (p=0,12). Sur les analyses par régression logistique, les patients ayant été traités par NUR laparoscopique avaient moins de chance de recevoir une transfusion sanguine (odds ratio [OR]: 0,6, p<0,001), de subir une complication intra-opératoire (OR: 0,4, p=0,002), et d’avoir une durée prolongée d’hospitalisation (OR: 0,4, p<0,001). Globalement les taux de complications postopératoires étaient équivalents. Toutefois, l’approche laparoscopique était associée à moins de complications pulmonaires (OR: 0,4, p=0,007). Cette étude est limitée par sa nature rétrospective. Conclusion: Après ajustement de potentiels biais de sélection, la NUR par approche laparoscopique est associée à moins de complications intraopératoires et péri-opératoires comparée à la NUR par approche ouverte.