Enhancing the efficiency of freight transport by using simulation

The role of transport in the economy is twofold. As a sector of economic activity it contributes to a share of national income. On the other hand, improvements in transport infrastructure create room for accelerated economic growth. As a means to support railways as a safe and environmentally friendly transportation mode, the EU legislation has required the opening of domestic railway freight for competition from beginning of year 2007. The importance of railways as a mode of transport has been great in Finland, as a larger share of freight has been carried on rails than in Europe on average. In this thesis it is claimed that the efficiency of goods transport can be enhanced by service specific investments. Furthermore, it is stressed that simulation can and should be used to evaluate the cost-efficiency of transport systems on operational level, as well as to assess transportation infrastructure investments. In all the studied cases notable efficiency improvements were found. For example in distribution, home delivery of groceries can be almost twice as cost efficient as the current practice of visiting the store. The majority of the cases concentrated on railway freight. In timber transportation, the item with the largest annual transport volume in domestic railway freight in Finland, the transportation cost could be reduced most substantially. Also in international timber procurement, the utilization of railway wagons could be improved by combining complementary flows. The efficiency improvements also have positive environmental effects; a large part of road transit could be moved to rails annually. If impacts of freight transport are included in cost-benefit analysis of railway investments, up to 50 % increase in the net benefits of the evaluated alternatives can be experienced, avoiding a possible inbuilt bias in the assessment framework, and thus increasing the efficiency of national investments in transportation infrastructure. Transportation systems are a typical example of complex real world systems that cannot be analysed realistically by analytical methods, whereas simulation allows inclusion of dynamics and the level of detail required. Regarding simulation as a viable tool for assessing the efficiency of transportation systems finds support also in the international survey conducted for railway freight operators; operators use operations research methods widely for planning purposes, while simulation is applied only by the larger operators.

Methods for assessing the sustainability of integrated municipal waste management and

The general striving to bring down the number of municipal landfills and to increase the reuse and recycling of waste-derived materials across the EU supports the debates concerning the feasibility and rationality of waste management systems. Substantial decrease in the volume and mass of landfill-disposed waste flows can be achieved by directing suitable waste fractions to energy recovery. Global fossil energy supplies are becoming more and more valuable and expensive energy sources for the mankind, and efforts to save fossil fuels have been made. Waste-derived fuels offer one potential partial solution to two different problems. First, waste that cannot be feasibly re-used or recycled is utilized in the energy conversion process according to EU’s Waste Hierarchy. Second, fossil fuels can be saved for other purposes than energy, mainly as transport fuels. This thesis presents the principles of assessing the most sustainable system solution for an integrated municipal waste management and energy system. The assessment process includes: · formation of a SISMan (Simple Integrated System Management) model of an integrated system including mass, energy and financial flows, and · formation of a MEFLO (Mass, Energy, Financial, Legislational, Other decisionsupport data) decision matrix according to the selected decision criteria, including essential and optional decision criteria. The methods are described and theoretical examples of the utilization of the methods are presented in the thesis. The assessment process involves the selection of different system alternatives (process alternatives for treatment of different waste fractions) and comparison between the alternatives. The first of the two novelty values of the utilization of the presented methods is the perspective selected for the formation of the SISMan model. Normally waste management and energy systems are operated separately according to the targets and principles set for each system. In the thesis the waste management and energy supply systems are considered as one larger integrated system with one primary target of serving the customers, i.e. citizens, as efficiently as possible in the spirit of sustainable development, including the following requirements: · reasonable overall costs, including waste management costs and energy costs; · minimum environmental burdens caused by the integrated waste management and energy system, taking into account the requirement above; and · social acceptance of the selected waste treatment and energy production methods. The integrated waste management and energy system is described by forming a SISMan model including three different flows of the system: energy, mass and financial flows. By defining the three types of flows for an integrated system, the selected factor results needed in the decision-making process of the selection of waste management treatment processes for different waste fractions can be calculated. The model and its results form a transparent description of the integrated system under discussion. The MEFLO decision matrix has been formed from the results of the SISMan model, combined with additional data, including e.g. environmental restrictions and regional aspects. System alternatives which do not meet the requirements set by legislation can be deleted from the comparisons before any closer numerical considerations. The second novelty value of this thesis is the three-level ranking method for combining the factor results of the MEFLO decision matrix. As a result of the MEFLO decision matrix, a transparent ranking of different system alternatives, including selection of treatment processes for different waste fractions, is achieved. SISMan and MEFLO are methods meant to be utilized in municipal decision-making processes concerning waste management and energy supply as simple, transparent and easyto- understand tools. The methods can be utilized in the assessment of existing systems, and particularly in the planning processes of future regional integrated systems. The principles of SISMan and MEFLO can be utilized also in other environments, where synergies of integrating two (or more) systems can be obtained. The SISMan flow model and the MEFLO decision matrix can be formed with or without any applicable commercial or free-of-charge tool/software. SISMan and MEFLO are not bound to any libraries or data-bases including process information, such as different emission data libraries utilized in life cycle assessments.

Toimitustäsmällisyyden suunnittelumenetelmä

Tutkimuksen ongelma on toimitusten ajallisen täsmällisyyden heikkeneminen kuljetuspolkujen pidentyessä ja erillisten suoritteitten lukumäärän kasvaessa. Näin usein tapahtuu toiminnan kansainvälistyessä. Tutkimuksen tavoitteena on kehittää menetelmä, jolla toimitusten ajallista täsmällisyyttä voidaan suunnitella ja ohjata sekä sen tavoitteet saavuttaa yllä todetusta kehityksestä huolimatta. Aluksi tutkimuksessa on jäsennetty toimitustäsmällisyyden nivoutumista yritys ja markkinointistrategioiden sekä tavoitteiden kokonaisuuteen. Täsmällisyyden merkitystä on myös tarkasteltu yleisesti yritysten kilpailutekijänä. Seuraavaksi on kehitetty interaktiivinen menetelmä, jonka avulla voidaan suunnitella yksittäisen toimituksen ajallista täsmällisyyttä. Toimituksen suoritteet ja niiden vaihtoehdot on kuvattu kvantifioituna, suunnattuna graafina eli verkkona. Ensin on tarkasteltu tilannetta, jossa suoritteiden kestot ovat vakiot ja sitten suoritteiden keston hajonnan huomioon ottavaa menetelmää, jonka avulla on löydettävissä kustannuksiltaan halvin, riittävän täsmällinen ja luotettava ratkaisu. Menetelmän soveltamista on tarkasteltu yleisesti sekä tulo että lähtölogistiikassa, dynaamisessa toimitussuoritetta koskevassa paatoksen teossa ja erilaisissa erityistapauksissa. Täsmällisyystavoitteitten asettamista ja muuttujia on tarkasteltu yleisesti ja käytännön soveltamisen kannalta. Käytännön soveltamista on kokeiltu valitun kohdeyrityksen esimerkkitilanteessa. Menetelmän toimivuutta on testattu simuloimalla sen ja perinteisesti suunniteltujen tehdastoimitusten sekä paikallisvarastosta tehtävien toimitusten tuloksia ja kustannuksia sekä vertaamalla niitä keskenään. Analyysin lopuksi on tarkasteltu esimerkkitilannetta logistisena kokonaisuutena lisäämällä vertailuun muitten kustannuskomponenttien ja lisäarvon vaikutus. Lopussa on käsitelty menetelmän käytännön soveltuvuusprofiilia ja jatkotutkimusaiheita. Yhteenvetona on todettu kehitetyn menetelmän tekevän täsmällisyyttä korostavan toimitusstrategian luotettavan toteuttamisen mahdolliseksi. Sen on taas todettu voivan olla edullinen vaihtoehto, jos täsmällisyydellä on markkina arvoa ja merkitystä pitkän tähtäimen menestystekijänä.

Biopolttoaineiden saatavuus ja hankintalogistiikka Kaakkois-Suomessa

"Biopolttoaineiden saatavuus ja hankintalogistiikka Kaakkois-Suomessa" -hankkeen tavoitteena oli tuottaa ajantasaista ja paikkaan sidottua tietoa energiatuotantoon soveltuvan biomassan saatavuudesta ja biomassapotentiaalin tehokkaan käytön mahdollistavasta logistiikkajärjestelmästä Kaakkois-Suomen alueella. Tarkastelussa mukana olleet polttoaineet eli metsä- ja peltobiomassat sekä turve ovat ns. paikallisia polttoaineita, joiden hankinta tapahtuu maaseudulta, ensisijaisesti mahdollisimman läheltä kutakin käyttöpaikkaa. Hankkeessa tutkittiin mahdollisuuksia lisätä paikallista polttoaineenhankintaa, kuljetusmääriä ja -kalustoa järkevästi 2010-luvulla toteutettavan energiapolitiikan myötä kasvavan polttoainetarpeen puitteissa. Rautatie- ja vesitiekuljetusten hyödyntämistä logistiikassa tutkittiin kahden tapaustutkimuksen avulla. Tutkittavia asioita olivat myös tuotantoketjujen lisääntyvä työvoimatarve sekä maantieteellisesti laajenevan raaka-ainehankinnan kasvihuonekaasupäästöistä aiheutuvat ympäristövaikutukset. Tärkeimpinä tuloksina saatiin tietoa siitä, kuinka laajalle alueelle biopolttoaineiden hankinta eri asiantilojen vallitessa Kaakkois-Suomen alueella ulottuu, ja millaisia hankintalogistiikkaan liittyviä ratkaisuja voidaan ottaa käyttöön alueellisen polttoainepulan muodostuessa. Logistiikan kannalta Kaakkois-Suomen etuja ovat monipuoliset kuljetusverkostot, mutta toisaalta varsinkin hyvät yhteydet ulkomaille rajoittavat paikallisesti investointiaktiivisuutta bioenergian tuotanto- ja käsittelykaluston osalta. Lisäksi maaseudun yrittäjien keskuudessa epävarmuutta aiheuttavat heilahtelevat raakapuumarkkinat ja muuttuva energiatukipolitiikka.

Consistency from the perspective of an experimental systems approach to the sciences and their epistemic objects

It is generally accepted that the development of the modern sciences is rooted in experiment. Yet for a long time, experimentation did not occupy a prominent role, neither in philosophy nor in history of science. With the 'practical turn' in studying the sciences and their history, this has begun to change. This paper is concerned with systems and cultures of experimentation and the consistencies that are generated within such systems and cultures. The first part of the paper exposes the forms of historical and structural coherence that characterize the experimental exploration of epistemic objects. In the second part, a particular experimental culture in the life sciences is briefly described as an example. A survey will be given of what it means and what it takes to analyze biological functions in the test tube.

Harvesting and wood transport planning with SNAP III program (Scheduling and Network Analysis Program) in a pine plantation in Southeast Brazil

The objective of this study was to verify the potential of SNAP III (Scheduling and Network Analysis Program) as a support tool for harvesting and wood transport planning in Brazil harvesting subsystem definition and establishment of a compatible route were assessed. Initially, machine operational and production costs were determined in seven subsystems for the study area, and quality indexes, construction and maintenance costs of forest roads were obtained and used as SNAP III program input data. The results showed, that three categories of forest road occurrence were observed in the study area: main, secondary and tertiary which, based on quality index, allowed a medium vehicle speed of about 41, 30 and 24 km/hours and a construction cost of about US$ 5,084.30, US$ 2,275.28 and US$ 1,650.00/km, respectively. The SNAP III program used as a support tool for the planning, was found to have a high potential tool in the harvesting and wood transport planning. The program was capable of defining efficiently, the harvesting subsystem on technical and economical basis, the best wood transport route and the forest road to be used in each period of the horizon planning.

Operational characteristics of four metering systems for agricultural fertilizers and amendments

The use of fertilizers and solid amendments in agriculture generates special interest for their effect on crop productivity, as well as for their environmental impact. The efficient use of these products demands knowing their physical and mechanical properties, the storing conditions effect and the operational characteristics of the metering systems used in the fertilizing equipment. In this context, the present study was developed with the purpose of evaluating the operational characteristics of different fertilizing metering systems and to determine the adequate metering system-product operational parameters, using powder lime, powder gypsum, granular 10-30-10 (N-P-K), and granular urea. Operational differences were established among four types of commercial fertilizer metering systems, including wire auger, star-shaped feed wheel, feed screw and ridged traction wheel. The study found that the unloading rate depends directly on the fertilizer metering system's rotating speed and is affected by particle size, repose angle, bulk density and moisture content of the applied product. The wire auger and star-shaped feed wheel metering systems were adequate for the distribution of powder products and the feed screw for granulated fertilizers. Furthermore, theoretical and experimental characteristic equations were established, defining curves for calibration and handling of the products plus the rotating speed range in which a better distributing behavior was achieved.

Corporate Social Responsibility in the Oil and Gas Industry: Environmental Management Systems as a Source of Sustainable Development

The environmental aspect of corporate social responsibility (CSR) expressed through the process of the EMS implementation in the oil and gas companies is identified as the main subject of this research. In the theoretical part, the basic attention is paid to justification of a link between CSR and environmental management. The achievement of sustainable competitive advantage as a result of environmental capital growth and inclusion of the socially responsible activities in the corporate strategy is another issue that is of special significance here. Besides, two basic forms of environmental management systems (environmental decision support systems and environmental information management systems) are explored and their role in effective stakeholder interaction is tackled. The most crucial benefits of EMS are also analyzed to underline its importance as a source of sustainable development. Further research is based on the survey of 51 sampled oil and gas companies (both publicly owned and state owned ones) originated from different countries all over the world and providing reports on sustainability issues in the open access. To analyze their approach to sustainable development, a specifically designed evaluation matrix with 37 indicators developed in accordance with the General Reporting Initiative (GRI) guidelines for non-financial reporting was prepared. Additionally, the quality of environmental information disclosure was measured on the basis of a quality – quantity matrix. According to results of research, oil and gas companies prefer implementing reactive measures to the costly and knowledge-intensive proactive techniques for elimination of the negative environmental impacts. Besides, it was identified that the environmental performance disclosure is mostly rather limited, so that the quality of non-financial reporting can be judged as quite insufficient. In spite of the fact that most of the oil and gas companies in the sample claim the EMS to be embedded currently in their structure, they often do not provide any details for the process of their implementation. As a potential for the further development of EMS, author mentions possible integration of their different forms in a single entity, extension of existing structure on the basis of consolidation of the structural and strategic precautions as well as development of a unified certification standard instead of several ones that exist today in order to enhance control on the EMS implementation.

Driver of Demand in Cargo and Passenger Traffic Between Penta Ports

Maritime transport moves around 6 billion tonnes of freight every year. The freight consists of liquid bulks (45%), dry bulks (23%) and general cargo (32%). Freight traffic and transports chains vary according to region, commodity and the origin and the destination of freight. In the European Union the ports sector handles over 90% of the trade with third countries. The share of intra-EU trade is approximately 30% of the total transportation and the number of passengers is over 200 million every year. The Baltic Sea has more than 50,000 vessels a year pass the Skaw at the northernmost tip of Denmark on their way into or out of the Baltic. Roughly 60% to 70% of these vessels are cargo vessels and 17% to 25% tankers. Ports and maritime transport play a crucial role in global commerce today. Today’s business environment is changing rapidly, and the constant changes create challenges for the transport industry and maritime traffic. Ports have to adapt to continuous changes in economic structures, logistics demands, and people’s travel and leisure patterns. In order to ensure the competitiveness of sea connections, the ports need to fully enhance multilateral cross-border understanding and cooperation. In this report the focus is on liner traffic between five ports in the Central Baltic Region: Stockholm, Tallinn, Helsinki Turku and Naantali. The report defines the drivers of the demand for cargo and passenger traffic and highlights the most important factors. The economic situation and foreign trade of each county are elaborated on with detailed information about the flows of traffic between the five ports. Based on expert interviews, the main characteristics of each port, including strengths and weaknesses, are presented. The report is based on primary and secondary data. Primary data was received through interviews and mail surveys. Secondary data was attained through a literature research, statistics, data given by the PENTA ports and webpages. The report is divided into two main parts: the drivers creating the demand for transport and the results of current cargo and passenger flows between PENTA ports.

Formal development and quantitative verification of dependable systems

-

Asiakastarpeiden kartoitus kuljetusten häiriöiden analysoinnin ja hallinnan kehittämiseksi

Tämä diplomityö on tehty osana Logproof-tutkimushanketta, joka keskittyy häiriöttömyyden hallintaan logistisissa monitoimijaverkostoissa. Työn tavoitteena on selvittää logistiikkaintensiivisten yritysten tarpeita kuljetusten häiriöiden analysoinnin ja hallinnan kehittämiseksi ja siten ennakoivan riskienhallinnan edistämiseksi. Asiakastarvetietoa on kerätty hyödyntäen puolistrukturoituja haastatteluja ja tietoa on analysoitu käyttäen hyväksi sisällönanalyysiä sekä tulkintataulukkoa. Kiinnostus kuljetusten häiriöitä ja niiden analysointia kohtaan on kasvamassa ja yrityksissä tiedostetaan hallintajärjestelmien ja analysoinnin tarve tulevaisuudessa. Kirjallisuuskatsauksen ja asiakastarpeiden kartoituksen avulla työssä on selvitetty yritysten nykytilaa kuljetusten häiriöiden hallinnan ja analysoinnin osalta ja tarkasteltu mahdollisia tulevaisuuden kehityssuuntia analysoimalla asiakkaiden näkyviä ja piileviä tarpeita. Työssä on edellisten lisäksi tarkasteltu, kuinka havaitut asiakastarpeet ovat sovitettavissa yhteen case-yrityksen, Oy Lars Krogius Ab:n, ARS (Analytic Rou-ting Solution) -palvelun ominaispiirteiden kanssa. Työ tarjoaa tarvetietoa palvelun tulevaisuuden kehitykselle.

Improving the inventory management and valuation process, Case: The Switch Drive Systems

The goal of this study is to create a new inventory valuation process for The Switch Drive Systems and to improve its inventory management practices. In the matter of inventories the main problems in the case company are that it doesn’t have consistent valuation methods throughout the company and that information received in ERP system isn’t trustful. The research is qualitative case study. The empirical data is gathered through observing and unstructured interviews. The research shows that material flow process and the inventory valuation must be divided and handled separately but they should interact with each other. The result is a new inventory valuation process which takes many factors of material process under the consideration in order to receive reliable value for inventories.

On state and parameter estimation in chaotic systems

State-of-the-art predictions of atmospheric states rely on large-scale numerical models of chaotic systems. This dissertation studies numerical methods for state and parameter estimation in such systems. The motivation comes from weather and climate models and a methodological perspective is adopted. The dissertation comprises three sections: state estimation, parameter estimation and chemical data assimilation with real atmospheric satellite data. In the state estimation part of this dissertation, a new filtering technique based on a combination of ensemble and variational Kalman filtering approaches, is presented, experimented and discussed. This new filter is developed for large-scale Kalman filtering applications. In the parameter estimation part, three different techniques for parameter estimation in chaotic systems are considered. The methods are studied using the parameterized Lorenz 95 system, which is a benchmark model for data assimilation. In addition, a dilemma related to the uniqueness of weather and climate model closure parameters is discussed. In the data-oriented part of this dissertation, data from the Global Ozone Monitoring by Occultation of Stars (GOMOS) satellite instrument are considered and an alternative algorithm to retrieve atmospheric parameters from the measurements is presented. The validation study presents first global comparisons between two unique satellite-borne datasets of vertical profiles of nitrogen trioxide (NO3), retrieved using GOMOS and Stratospheric Aerosol and Gas Experiment III (SAGE III) satellite instruments. The GOMOS NO3 observations are also considered in a chemical state estimation study in order to retrieve stratospheric temperature profiles. The main result of this dissertation is the consideration of likelihood calculations via Kalman filtering outputs. The concept has previously been used together with stochastic differential equations and in time series analysis. In this work, the concept is applied to chaotic dynamical systems and used together with Markov chain Monte Carlo (MCMC) methods for statistical analysis. In particular, this methodology is advocated for use in numerical weather prediction (NWP) and climate model applications. In addition, the concept is shown to be useful in estimating the filter-specific parameters related, e.g., to model error covariance matrix parameters.

Distributed document migration between ERP systems by means of messaging and event sourcing

This bachelor’s thesis, written for Lappeenranta University of Technology and implemented in a medium-sized enterprise (SME), examines a distributed document migration system. The system was created to migrate a large number of electronic documents, along with their metadata, from one document management system to another, so as to enable a rapid switchover of an enterprise resource planning systems inside the company. The paper examines, through theoretical analysis, messaging as a possible enabler of distributing applications and how it naturally fits an event based model, whereby system transitions and states are expressed through recorded behaviours. This is put into practice by analysing the implemented migration systems and how the core components, MassTransit, RabbitMQ and MongoDB, were orchestrated together to realize such a system. As a result, the paper presents an architecture for a scalable and distributed system that could migrate hundreds of thousands of documents over weekend, serving its goals in enabling a rapid system switchover.

Comparison between dSPACE and NI systems based on real-time intelligent control of a teleoperated hydraulic servo system

The Laboratory of Intelligent Machine researches and develops energy-efficient power transmissions and automation for mobile construction machines and industrial processes. The laboratory's particular areas of expertise include mechatronic machine design using virtual technologies and simulators and demanding industrial robotics. The laboratory has collaborated extensively with industrial actors and it has participated in significant international research projects, particularly in the field of robotics. For years, dSPACE tools were the lonely hardware which was used in the lab to develop different control algorithms in real-time. dSPACE's hardware systems are in widespread use in the automotive industry and are also employed in drives, aerospace, and industrial automation. But new competitors are developing new sophisticated systems and their features convinced the laboratory to test new products. One of these competitors is National Instrument (NI). In order to get to know the specifications and capabilities of NI tools, an agreement was made to test a NI evolutionary system. This system is used to control a 1-D hydraulic slider. The objective of this research project is to develop a control scheme for the teleoperation of a hydraulically driven manipulator, and to implement a control algorithm between human and machine interaction, and machine and task environment interaction both on NI and dSPACE systems simultaneously and to compare the results.