State Transition Based Embedding in Cepstrum Domain for Audio Copyright Protection

In this paper, we propose a new state transition based embedding (STBE) technique for audio watermarking with high fidelity. Furthermore, we propose a new correlation based encoding (CBE) scheme for binary logo image in order to enhance the payload capacity. The result of CBE is also compared with standard run-length encoding (RLE) compression and Huffman schemes. Most of the watermarking algorithms are based on modulating selected transform domain feature of an audio segment in order to embed given watermark bit. In the proposed STBE method instead of modulating feature of each and every segment to embed data, our aim is to retain the default value of this feature for most of the segments. Thus, a high quality of watermarked audio is maintained. Here, the difference between the mean values (Mdiff) of insignificant complex cepstrum transform (CCT) coefficients of down-sampled subsets is selected as a robust feature for embedding. Mdiff values of the frames are changed only when certain conditions are met. Hence, almost 50% of the times, segments are not changed and still STBE can convey watermark information at receiver side. STBE also exhibits a partial restoration feature by which the watermarked audio can be restored partially after extraction of the watermark at detector side. The psychoacoustic model analysis showed that the noise-masking ratio (NMR) of our system is less than -10dB. As amplitude scaling in time domain does not affect selected insignificant CCT coefficients, strong invariance towards amplitude scaling attacks is also proved theoretically. Experimental results reveal that the proposed watermarking scheme maintains high audio quality and are simultaneously robust to general attacks like MP3 compression, amplitude scaling, additive noise, re-quantization, etc.

Experimental and numerical studies on protection of buried pipelines and underground utilities using geocells

This paper presents the results of the laboratory model tests and the numerical studies conducted on small diameter PVC pipes, buried in geocell reinforced sand beds. The aim of the study was to evaluate the suitability of the geocell reinforcement in protecting the underground utilities and buried pipelines. In addition to geocells, the efficacy of only geogrid and geocell with additional basal geogrid cases were also studied. A PVC (Poly Vinyl Chloride) pipe with external diameter 75 mm and thickness 1.4 mm was used in the experiments. The vehicle tire contact pressure was simulated by applying the pressure on the top of the bed with the help of a steel plate. Results suggest that the use of geocells with additional basal geogrid considerably reduces the deformation of the pipe as compared to other types of reinforcements. Further, the depth of placement of pipe was also varied between 1B to 2B (B is the width of loading plate) below the plate in the presence of geocell with additional basal geogrid. More than 50% reduction in the pressure and more than 40% reduction in the strain values were observed in the presence of reinforcements at different depths as compared to the unreinforced beds. Conversely, the performance of the subgrade soil was also found to be marginally influenced by the position of the pipe, even in the presence of the relatively stiff reinforcement system. Further, experimental results were validated with 3-dimensional numerical studies using FLAC(3D) (Fast Lagrangian Analysis of Continua in 3D). A good agreement in the measured pipe stain values were observed between the experimental and numerical studies. Numerical studies revealed that the geocells distribute the stresses in the lateral direction and thus reduce the pressure on the pipe. In addition, the results of the 1-g model tests were scaled up to the prototype case of the shallow buried pipeline below the pavement using the appropriate scaling laws. (C) 2015 Elsevier Ltd. All rights reserved.

System reliability analysis of granular filter for protection against piping in dams

Granular filters are provided for the safety of water retaining structure for protection against piping failure. The phenomenon of piping triggers when the base soil to be protected starts migrating in the direction of seepage flow under the influence of seepage force. To protect base soil from migration, the voids in the filter media should be small enough but it should not also be too small to block smooth passage of seeping water. Fulfilling these two contradictory design requirements at the same time is a major concern for the successful performance of granular filter media. Since Terzaghi era, conventionally, particle size distribution (PSD) of granular filters is designed based on particle size distribution characteristics of the base soil to be protected. The design approach provides a range of D15f value in which the PSD of granular filter media should fall and there exist infinite possibilities. Further, safety against the two critical design requirements cannot be ensured. Although used successfully for many decades, the existing filter design guidelines are purely empirical in nature accompanied with experience and good engineering judgment. In the present study, analytical solutions for obtaining the factor of safety with respect to base soil particle migration and soil permeability consideration as proposed by the authors are first discussed. The solution takes into consideration the basic geotechnical properties of base soil and filter media as well as existing hydraulic conditions and provides a comprehensive solution to the granular filter design with ability to assess the stability in terms of factor of safety. Considering the fact that geotechnical properties are variable in nature, probabilistic analysis is further suggested to evaluate the system reliability of the filter media that may help in risk assessment and risk management for decision making.

Protection of Digital Telecom Exchanges Against Lightning Surges and Earth Faults

Low-power electronic devices used in digital telecom exchanges are vulnerable to surge voltages and currents primarily originating from natural lightning or due to the direct interactions between electric power and telecommunication lines, etc., causing the earth/ground potential rise, neutral potential rise, and faults in the system. The fault currents may flow directly to telecom lines or through the equipment to the customer's premises, causing adequate damage to the equipment and personnel safety. In wireline applications, analog or digital, central office, exchanges, and subscriber sides have to be protected. Decisive protection and protective methods have to be employed for proper functioning of the equipment under overvoltage/overcurrent conditions. Current investigation reports some interesting results obtained on the recently developed high-voltage high-current protection cards used in digital telecom exchanges. The performances of protection cards both for the ring wave and hybrid wave surges are evaluated and presented. The surge generators required for the investigation are developed and fabricated in house as per the relevant telecom standards.

Surface modification of mild steel by a self-assembled cetyl-trimethyl ammonium bromide (CTAB) monolayer: Evaluation of its corrosion protection property

The surface of mild steel was modified by generating cetyl-trimethyl ammonium bromide (CTAB) self-assembled monolayer (SAM) to enhance the corrosion resistance property. The experimental parameters (pH and time) for SAM generation were optimized. The modified surface was characterized by infrared reflection absorption spectroscopy (IRRAS) and contact angle measurements. The SAM generated in 1 mM solution of CTAB at pH 2.5 for 2 h showed a regimented monolayer. Polarization and electrochemical impedance spectroscopic (EIS) studies demonstrated a significant enhancement in the corrosion resistance property of the SAM protected steel in both 1 M HCl and 3.5% NaCl solution. The CTAB SAM surface substantially reduced the corrosion rate by approximately 4 times in 1 M HCl and 1.5 times in 3.5% NaCl media as compared to bare steel. Scanning electron microscopy images confirmed the formation of lesser amounts of corrosion products on the SAM protected surface. (C) 2015 Elsevier B.V. All rights reserved.

Biosensor with Total Internal reflection Imaging Ellipsometry

In order to monitor multiple protein reaction processes simultaneously, a biosensor based on imaging ellipsometry operated in the total internal reflection mode is proposed. It could be realised as an automatic analysis for protein interaction processes with real-time label-free method. Its principle and methodology as well as a demonstration for its applications are presented.

Evaluación de la sustitucion parcial o total de aceite de palma (Elaeis guinensis) por aceite de fritura como fuente de energía en la ración alimenticia de pollos de engorde

La presente investigación estuvo dirigida a determinar la viabilidad, que sobre el desempeño productivo del pollo de engorde, podía ejercer la sustitución parcial o total del porcentaje de aceite de palma (Elaeís guínensis, Jacq) por aceite de fritura como fuente de energía en la ración alimenticia. La sustitución parcial o total se hizo con base en el 6% de aceite que se incluye en la fórmula alimenticia, ajustada a los requerimientos de los pollos de engorde. El ensayo experimental fue realizado en la granja avícola "La Trinidad", propiedad de la empresa TIP-TOP INDUSTRIAL S.A. Se utilizaron 700 pollos de engorde para producción comercial, del híbrido Peterson-Hubbard, de un día de edad y mantenidos en evaluación durante un periodo de 42 días. Estos fueron distribuidos aleatoriamente en cuatro tratamientos, conformados cada uno de cinco unidades experimentales, y éstas a su vez con 35 pollos cada una, quedando de la forma siguiente: Tratamiento T1 (testigo): 6% aceite de palma; tratamiento T2 : 2% aceite de palma y 4% aceite de fritura; tratamiento T3: 1% aceite de palma y 5% aceite de fritura; tratamiento T4 : 6% aceite de fritura. El resto de los ingredientes que conformó la dieta alimenticia fue igual para todos los tratamientos; así como también el manejo de los pollos se realizó al igual que lo hace la Empresa para toda su producción. Las variables estudiadas fueron consumo de alimento, peso vivo final y conversión de alimento. Los resultados obtenidos a partir de estas variables fueron analizados a través de un Diseño Completamente Aleatorio y sometidos a la Prueba de Tukey, el que proporcionó la superioridad existente entre tratamientos. Se encontraron diferencias significativas (p<0.05) entre tratamientos para la variable conversión alimenticia, con índices de conversión para el final de período experimental, de 1.8050, 1.7829, 1.7550 y 1.7310 para los tratamientos T1, T2, T3 y T4, respectivamente. Las variables consumo acumulado de alimento y peso vivo final no presentaron diferencias estadísticas a un nivel de significancia de p<0.05. El análisis financiero demostró que el tratamiento T4 tiene un menor costo de alimentación, siendo este de C$3.35/kg peso vivo. Encontrándose los tratamientos T1.T2 y T3 con costos de C$3.8210, C$3.5624; y C$3.4527/kg peso vivo, respectivamente. El mayor beneficio neto por kilogramo de peso vivo lo obtuvo el tratamiento T4, con C$0.47. Siendo el beneficio neto para los tratamientos T2 y T3 de C$0.26 y C$ 0.37, respectivamente. La mortalidad presentada por los tratamientos T1, T2, T3, y T4 para el final del período experimental fue de 5.13, 3.99, 2.85 y 3.99 (%), respectivamente.

Efecto de distintos intervalos de mediciones de leche sobre la estimación de producción de leche total, repetibilidad y la forma de la curva de lactancia en un hato reyna

El presente trabajo se realizó con el objetivo de estudiar el efecto de cuatro intervalos de medición de leche (diario, cada 7, 14 y 28 días) sobre la producción de leche total, la repetibilidad y la forma de la curva de lactancia. Para lo cual se utilizaron los registros productivos y reproductivos del hato criollo Reyna de la Finca San José ubicada en Masatepe, Nicaragua. Se estudiaron 105 lactancia provenientes de 28 vacas durante el periodo de 1982 - 1990. Las características estudiadas fueron PLTOT, repetibilidad y la forma de la curva de lactancia. Todos los análisis estadísticos fueron realizados con el procedimiento de mínimos cuadrados y máxima verosimilitud establecido en el paquete estadístico LSMLMW total, obteniéndose las siguientes medias de mínimos cuadrados: 1,655.23±77.79 para el tratamiento 1 total. Los valores encontrados para los indices de Repetibilidad para cada uno de los tratamientos fueron de: 0.46±0.11, 0.50±0.11, 0.48±0.11 y 0.50±0.11 para los tratamientos 1, 2, 3, 4 respectivamente Los valores para los parámetros y variables estudias en la curva de la lactancia fueron 3.2±2.5, 0.47±0.32, 0.01± 0.06, 51.81±29.10, 9.45±3.49 y 6.97±1.02 para a, b, c, Tp, Rp y S respectivamente Al estudiar el efecto de los tratamiento sobre las variables y parámetros de la curva de lactancia se determino que solamente la variable (S) que determina la persistencia fue afectada significativamente

Evaluation of live-attenuated Salmonella vaccines expressing Campylobacter antigens for control of C. jejuni in poultry

Campylobacter jejuni is a zoonotic bacterial pathogen of worldwide importance. It is estimated that 460,000 human infections occur in the United Kingdom per annum and these involve acute enteritis and may be complicated by severe systemic sequelae. Such infections are frequently associated with the consumption of contaminated poultry meat and strategies to control C. jejuni in poultry are expected to limit pathogen entry into the food chain and the incidence of human disease. Toward this aim, a total of 840 Light Sussex chickens were used to evaluate a Salmonella enterica serovar Typhimurium ΔaroA vaccine expressing the C. jejuni amino acid binding protein CjaA as a plasmid-borne fusion to the C-terminus of fragment C of tetanus toxin. Chickens were given the vaccine at 1-day-old and two weeks later by oral gavage, then challenged after a further two weeks with C. jejuni. Across six biological replicates, statistically significant reductions in caecal C. jejuni of c. 1.4 log10 colony-forming units/g were observed at three and four weeks post-challenge relative to age-matched unvaccinated birds. Protection was associated with the induction of CjaA-specific serum IgY and biliary IgA. Protection was not observed using a vaccine strain containing the empty plasmid. Vaccination with recombinant CjaA subcutaneously at the same intervals significantly reduced the caecal load of C. jejuni at three and four weeks post-challenge. Taken together these data imply that responses directed against CjaA, rather than competitive or cross-protective effects mediated by the carrier, confer protection. The impact of varying parameters on the efficacy of the S. Typhimurium ΔaroA vaccine expressing TetC-CjaA was also tested. Delaying the age at primary vaccination had little impact on protection or humoral responses to CjaA. The use of the parent strain as carrier or changing the attenuating mutation of the carrier to ΔspaS or ΔssaU enhanced the protective effect, consistent with increased invasion and persistence of the vaccine strains relative to the ΔaroA mutant. Expression in the ΔaroA strain of a TetC fusion to Peb1A, but not TetC fusions to GlnH or ChuA, elicited protection against intestinal colonisation by C. jejuni that was comparable to that observed with the TetC-CjaA fusion. Our data are rendered highly relevant by use of the target host in large numbers and support the potential of CjaA- and Peb1A-based vaccines for control of C. jejuni in poultry. © 2009 Elsevier Ltd. All rights reserved.

Revelation of a Functional Dependence of the Sum of Two Uniaxial Strengths/Hardness on Elastic Work/Total Work of Indentation

Dimensional and finite element analyses were used to analyze the relationship between the mechanical properties and instrumented indentation response of materials. Results revealed the existence of a functional dependence of (engineering yield strength sigma(E,y) + engineering tensile strength sigma(E,b))/Oliver & Pharr hardness on the ratio of reversible elastic work to total work obtained from an indentation test. The relationship links up the Oliver & Pharr hardness with the material strengths, although the Oliver & Pharr hardness may deviate from the true hardness when sinking in or piling up occurs. The functional relationship can further be used to estimate the SUM sigma(E,y) + sigma(E,b) according to the data of an instrumented indentation test. The sigma(E,y) + sigma(E,b) value better reflects the strength of a material compared to the hardness value alone. The method was shown to be effective when applied to aluminum alloys. The relationship can further be used to estimate the fatigue limits, which are usually obtained from macroscopic fatigue tests in different modes.

Coatings and surface treatments for protection against low-velocity erosion-corrosion in fluidized beds

Surface coatings and treatments have been used to reduce material loss of components in bubbling fluidized bed combustors (FBCs). The performance of protective coatings in FBC boilers and laboratory simulations is reviewed. Important coating properties to minimize wastage appear to be high hardness, low oxidation rate, low porosity, high adhesion and sufficient thickness to maintain protection for a long period. Economic considerations and criteria for choosing a suitable coating or treatment are discussed for the different types of bubbling FBC. © 1995.

The “Centre for Child Protection” of the Gregorian University/Rome. First experiences, results and reflections in setting up a global e-learning-program for the prevention of sexual abuse of minors

Resumen: El Centro para la Protección Infantil ha sido fundado en cooperación con el Instituto de Psicología de la Universidad Gregoriana (Roma, Italia), el Departamento para la Psiquiatría/Psicoterapia Infantil y Adolescente del Hospital de la Universidad de Ulm (Alemania) y la Arquidiócesis de Múnich (Alemania). Su tarea principal es la creación de un centro global de entrenamiento e-learning para profesiones de pastoral que respondan al abuso sexual de los menores, tomando en consideración asuntos multilingüísticos e interculturales. Dentro de tres años el Centro desarrollado e implementado un programa e-learning en cuatro lenguas. Ocho socios del proyecto internacional asumen un papel en el reclutamiento de participantes y en la evaluación en curso del programa. En esta fase, personas-test son incluidas en el desarrollo y la evaluación del programa, como parte de la formación (en curso) de sacerdotes y de otros coagentes de pastoral

Efectos de la combinación de abonos orgánicos y fertilizante químico sobre la densidad aparente y el espacio poroso total de un suelo volcánico Nicaragüense

Se realizó un muestreo de suelos en parcelas experimentales de un ensayo de campo, con el fin de evaluar los efectos de la aplicación de tres dosis de Abonos Orgáníeos (AO), combinadas con fertilizante químico, sobre la densidad aparente (á) y el espacio poroso total (FPT) de un suelo volcánico nicaragüense. El ensayo se realizó durante la época de Postrera (Septiembre -Diciembre) de 1989, en la Finca Experimental La Compañía, Carazo, Nicaragua; sobre un suelo franco - arenoso derivado de cenizas volcánicas (Typic Durandepts). Se utilizó un experimento Bifactorial en diseño de parcelas divididas en Bloques completos al azar, con cuatro réplicas. Los AO empleados fueron Gallinaza, Compost y Pulpa de café, siendo las dosis ensayadas de 5, 10 y 15 ton.ha 1 de cada uno, combinadas con Fosfato Díamónico a razón de 64.8 kg.ba· 1• Se observó una disminoción de la d y un aumento del EPT con la aplícacion de los AO, siendo este efecto influido por las dosis incorporadas. Las parcelas que presentaron la menor d y el mayor EPT, fueron aquellas donde se incorporó el Compost.

Research Progress On Thermal Protection Materials And Structures Of Hypersonic Vehicles

Hypersonic vehicles represent future trends of military equipments and play an important role in future war. Thermal protection materials and structures, which relate to the safety of hypersonic vehicles, are one of the most key techniques in design and manufacture of hypersonic vehicles. Among these materials and structures, such as metallic temperature protection structure, the temperature ceramics and carbon/carbon composites are usually adopted in design. The recent progresses of research and application of ultra-high temperature materials in preparation, oxidation resistance, mechanical and physical characterization are summarized.