DEVELOPMENT OF POROUS CONCRETE GEOPOLYMER USING HYDROGEN PEROXIDE AS BLOWING AGENT.

Metakaolin and volcanic ashes respectively called MK and ZG were used as aluminosilicate raw materials for the synthesis of porous geopolymers. The hydrogen peroxide was used as a blowing agent. The geopolymer prepared were characterized by Spectroscopy Fourier Transform Infrared (SFTI), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and the determination of some physical properties such as bulk density, total porosity, volume shrinkage, compressive strength and thermal conductivity was also carried out. The presence of pores in the geopolymer obtained is function of the percentage of hydrogen peroxide added, causing the concomitantly decrease in compressive strength, apparent density and thermal conductivity. The use of hydrogen peroxide as a blowing agent gave some thermal insulation properties to these geopolymers which could be close to the properties of some commercial insulation materials.

Peroxide bond-dependent antiplasmodial specificity of artemisinin and OZ277 (RBx11160)

Using nonperoxidic analogs of artemisinin and OZ277 (RBx11160), the strong in vitro antiplasmodial activities of the latter two compounds were shown to be peroxide bond dependent. In contrast, the weak activities of artemisinin and OZ277 against six other protozoan parasites were peroxide bond independent. These data support the iron-dependent artemisinin alkylation hypothesis.

Erosive and buffering capacities of yogurt

OBJECTIVE: The capability of drinks and foods to resist pH changes brought about by salivary buffering may play an important role in the erosion of dental enamel. The aim of the present study was to measure the initial pH of several types of yogurt and to test the degrees of saturation (pK-pl) with respect to hydroxyapatite and fluorapatite to determine the buffering capacity and related erosive potential of yogurt. METHOD AND MATERIALS: Twenty-five milliliters of 7 types of freshly opened yogurt was titrated with 1 mol/L of sodium hydroxide, added in 0.5 mL increments, until the pH reached 10, to assess the total titratable acidity, a measure of the drink's own buffering capacity. The degrees of saturation (pK-pl) with respect to hydroxyapatite and fluorapatite were also calculated, using a computer program developed for this purpose. For statistical analysis, samples were compared using Kruskal-Wallis test. RESULTS: The buffering capacities can be ordered as follows: fruit yogurt >low-fat yogurt >bioyogurt >butter yogurt >natural yogurt >light fruit yogurt >light yogurt. The results suggest that, in vitro, fruit yogurt has the greatest buffering capacity. CONCLUSION: It can be stated that it is not possible to induce erosion on enamel with any type of yogurt.

Erosion--diagnosis and risk factors

Dental erosion is a multifactorial condition: The interplay of chemical, biological and behavioural factors is crucial and helps explain why some individuals exhibit more erosion than others. The erosive potential of erosive agents like acidic drinks or foodstuffs depends on chemical factors, e.g. pH, titratable acidity, mineral content, clearance on tooth surface and on its calcium-chelation properties. Biological factors such as saliva, acquired pellicle, tooth structure and positioning in relation to soft tissues and tongue are related to the pathogenesis of dental erosion. Furthermore, behavioural factors like eating and drinking habits, regular exercise with dehydration and decrease of salivary flow, excessive oral hygiene and, on the other side, an unhealthy lifestyle, e.g. chronic alcoholism, are predisposing factors for dental erosion. There is some evidence that dental erosion is growing steadily. To prevent further progression, it is important to detect this condition as early as possible. Dentists have to know the clinical appearance and possible signs of progression of erosive lesions and their causes such that adequate preventive and, if necessary, therapeutic measures can be initiated. The clinical examination has to be done systematically, and a comprehensive case history should be undertaken such that all risk factors will be revealed.

Effects of buffering properties and undissociated acid concentration on dissolution of dental enamel in relation to pH and acid type

To quantify the relationships between buffering properties and acid erosion and hence improve models of erosive potential of acidic drinks, a pH-stat was used to measure the rate of enamel dissolution in solutions of citric, malic and lactic acids, with pH 2.4-3.6 and with acid concentrations adjusted to give buffer capacities (β) of 2-40 (mmol·l(-1))·pH(-1) for each pH. The corresponding undissociated acid concentrations, [HA], and titratable acidity to pH 5.5 (TA5.5) were calculated. In relation to β, the dissolution rate and the strength of response to β varied with acid type (lactic > malic ≥ citric) and decreased as pH increased. The patterns of variation of the dissolution rate with TA5.5 were qualitatively similar to those for β, except that increasing pH above 2.8 had less effect on dissolution in citric and malic acids and none on dissolution in lactic acid. Variations of the dissolution rate with [HA] showed no systematic dependence on acid type but some dependence on pH. The results suggest that [HA], rather than buffering per se, is a major rate-controlling factor, probably owing to the importance of undissociated acid as a readily diffusible source of H(+) ions in maintaining near-surface dissolution within the softened layer of enamel. TA5.5 was more closely correlated with [HA] than was β, and seems to be the preferred practical measure of buffering. The relationship between [HA] and TA5.5 differs between mono- and polybasic acids, so a separate analysis of products according to predominant acid type could improve multivariate models of erosive potential.

Oral hygiene products, medications and drugs - hidden aetiological factors for dental erosion.

Acidic or EDTA-containing oral hygiene products and acidic medicines have the potential to soften dental hard tissues. The low pH of oral care products increases the chemical stability of some fluoride compounds and favours the incorporation of fluoride ions in the lattice of hydroxyapatite and the precipitation of calcium fluoride on the tooth surface. This layer has some protective effect against an erosive attack. However, when the pH is too low or when no fluoride is present these protecting effects are replaced by direct softening of the tooth surface. Oral dryness can occur as a consequence of medication such as tranquilizers, antihistamines, antiemetics and antiparkinsonian medicaments or of salivary gland dysfunction. Above all, patients should be aware of the potential demineralization effects of oral hygiene products with low pH. Acetyl salicylic acid taken regularly in the form of multiple chewable tablets or in the form of headache powder, as well as chewing hydrochloric acids tablets for the treatment of stomach disorders, can cause erosion. There is most probably no direct association between asthmatic drugs and erosion on the population level. Consumers and health professionals should be aware of the potential of tooth damage not only by oral hygiene products and salivary substitutes but also by chewable and effervescent tablets. Several paediatric medications show a direct erosive potential in vitro. Clinical proof of the occurrence of erosion after use of these medicaments is still lacking. However, regular and prolonged use of these medicaments might bear the risk of causing erosion. Additionally, it can be assumed that patients suffering from xerostomia should be aware of the potential effects of oral hygiene products with low pH and high titratable acidity.

Enamel Surface Changes After Exposure to Bleaching Gels Containing Carbamide Peroxide or Hydrogen Peroxide.

OBJECTIVE This study evaluated the differences in enamel color change, surface hardness, elastic modulus, and surface roughness between treatments with four bleaching gels containing carbamide peroxide (two at 10% and one each at 35%, and 45%) and two bleaching gels containing hydrogen peroxide (two at 40%). METHODS Enamel specimens were bleached and color changes were measured. Color change was calculated using either ΔE or the Bleaching Index (BI). Then, surface hardness, elastic modulus, and surface roughness of the enamel specimens were evaluated. All measurements were performed at baseline and directly after the first bleaching treatment for all carbamide peroxide- and hydrogen peroxide-containing bleaching gels. In addition, final measurements were made 24 hours after each of a total of 10 bleaching treatments for carbamide peroxide bleaching gels, and 1 week after each of a total of three bleaching treatments for hydrogen peroxide bleaching gels. RESULTS After the last bleaching treatment, respective ΔE scores were 17.6 and 8.2 for the two 10% carbamide peroxide gels, 12.9 and 5.6 for the 45% and 35% carbamide peroxide gels, and 9.6 and 13.9 for the two 40% hydrogen peroxide gels. The respective BI scores were -2.0 and -2.0 for the two 10% carbamide peroxide gels, -3.5 and -1.5 for the 45% and 35% carbamide peroxide gels, and -2.0 and -3.0 for the two 40% hydrogen peroxide gels. Each bleaching gel treatment resulted in significant whitening; however, no significant difference was found among the gels after the last bleaching. Whitening occurred within the first bleaching treatments and did not increase significantly during the remaining treatments. Surface hardness significantly decreased after the last bleaching treatment, when 10% carbamide peroxide was used. Furthermore, significant changes in the elastic modulus or surface roughness occurred only after treatment with 10% carbamide peroxide. CONCLUSION All six bleaching gels effectively bleached the enamel specimens independent of their concentration of peroxide. Gels with low peroxide concentration and longer contact time negatively affected the enamel surface.

Analyses of the Erosive Effect of Dietary Substances and Medications on Deciduous Teeth.

This study aimed at analysing the erosive potential of 30 substances (drinks, candies, and medicaments) on deciduous enamel, and analyse the associated chemical factors with enamel dissolution. We analysed the initial pH, titratable acidity (TA) to pH 5.5, calcium (Ca), inorganic phosphate (Pi), and fluoride (F) concentration, and degree of saturation ((pK -pI)HAP, (pK -pI)FAP, and (pK-pI)CaF2) of all substances. Then, we randomly distributed 300 specimens of human deciduous enamel into 30 groups (n = 10 for each of the substances tested. We also prepared 20 specimens of permanent enamel for the sake of comparison between the two types of teeth, and we tested them in mineral water and Coca-Cola®. In all specimens, we measured surface hardness (VHN: Vickers hardness numbers) and surface reflection intensity (SRI) at baseline (SHbaseline and SRIbaseline), after a total of 2 min (SH2min) and after 4 min (SH4min and SRI4min) erosive challenges (60 ml of substance for 6 enamel samples; 30°C, under constant agitation at 95 rpm). There was no significant difference in SHbaseline between deciduous and permanent enamel. Comparing both teeth, we observed that after the first erosive challenge with Coca-Cola®, a significantly greater hardness loss was seen in deciduous (-90.2±11.3 VHN) than in permanent enamel (-44.3±12.2 VHN; p = 0.007), but no differences between the two types of teeth were observed after two challenges (SH4min). After both erosive challenges, all substances except for mineral water caused a significant loss in relative surface reflectivity intensity, and most substances caused a significant loss in surface hardness. Multiple regression analyses showed that pH, TA and Ca concentration play a significant role in initial erosion of deciduous enamel. We conclude that drinks, foodstuffs and medications commonly consumed by children can cause erosion of deciduous teeth and erosion is mainly associated with pH, titratable acidity and calcium concentration in the solution.

Conservación de dos variedades de arándano alto en condiciones de frío convencional

Se evaluaron dos cultivares de arándano alto por su comportamiento en almacenamiento refrigerado convencional. Frutos completamente azules se seleccionaron, envasaron en "clamshells" y sometieron a almacenamiento refrigerado a 0 °C y 85-90 % HR durante 10, 17, 24 y 31 días. Para cada período de almacenamiento se realizaron muestreos: (1) a salida de frío y (2) después de dos días a temperatura ambiente. Se evaluó la homogeneidad en el empaque, pérdida de peso, firmeza, contenido de sólidos solubles, acidez titulable, pH y relación sólidos solubles:acidez titulable. El peso promedio de los frutos fue de 1.9 g, correspondiéndoles el grado "extralarge". La fruta se mantuvo en buenas condiciones durante 11 días de almacenamiento refrigerado, después perdió calidad como consecuencia de la pérdida de peso. Se encontró que Bluejay superó a Brigitta en firmeza. El contenido de sólidos solubles aumentó proporcionalmente a la duración del período de almacenamiento. En los períodos de 10 y 31 días Brigitta presentó mayor acidez titulable y menor relación sólidos solubles:acidez titulable que Bluejay. En ambos cultivares se observó un aumento significativo del pH al mes de almacenamiento. A partir de la correlación entre las variables evaluadas se infiere que el contenido de sólidos solubles y la firmeza constituyeron buenos índices de la calidad de la fruta en ambas variedades.

Durazneros bajo tela antigranizo : efectos sobre la madurez y calidad

Para evaluar la influencia de la tela antigranizo sobre la calidad de duraznos para industria cv. Dr. Davis en dos fechas de cosecha se determinó la madurez y calidad de frutos de plantas testigo y bajo tela antigranizo. Los parámetros medidos fueron peso, intensidad de color de piel y de pulpa, firmeza de pulpa, contenido de sólidos solubles (CSS), acidez titulable (AT) y relación CSS/AT. La tela antigranizo no afectó el peso de los frutos. En cambio retrasó su maduración y disminuyó su calidad. El color de piel y pulpa, el CSS y la relación CSS/AT fueron menores en las plantas bajo tela antigranizo pero, en sus frutos, la firmeza de pulpa fue mayor.

Ciruelas bajo tela antigranizo : : efecto sobre la calidad

Se evaluó la influencia de la tela antigranizo en la calidad en cosecha y postcosecha de ciruelas japonesas (Prunus salicina Lindl.) cv. Angeleno. Se cosechó fruta de plantas bajo tela y sin tela en dos fechas. Las determinaciones de madurez y calidad se hicieron en cosecha, después de 45 y 60 días de almacenamiento refrigerado (0 °C y HR = 85 %) y luego de un período de maduración a 20 °C. Parámetros considerados: tamaño, color, firmeza de pulpa, contenido de sólidos solubles, pH, acidez titulable, relación CSS/AT, deshidratación y desórdenes fisiológicos (harinosidad). Se realizó un análisis factorial teniendo en cuenta tela antigranizo (T), fecha de cosecha (F) y período de almacenamiento refrigerado (P). Los factores T y F actuaron sobre el tamaño, color de piel, firmeza de pulpa, CSS, AT y CSS/AT en las evaluaciones realizadas en cosecha. Después del período de maduración, los factores T, F y P tuvieron principalmente efecto en la firmeza de pulpa, AT y CSS/AT. La fecha de cosecha y el período de almacenamiento tuvieron una marcada influencia sobre la incidencia de harinosidad.

Ciruela japonesa : : parámetros de madurez y calidad

Durante la maduración de frutos de ciruela japonesa [Prunus salicina (Lindl.)] cv. Black Amber, Laroda y Angeleno se evaluaron parámetros de madurez y calidad. Semanalmente se midió la intensidad de color superior de la piel y porcentaje de cubrimiento; firmeza de pulpa; sólidos solubles (CSS) y acidez titulable (AT). Para cada parámetro se ajustó un modelo matemático de correlación con la variable tiempo. El color se desarrolló temprano durante la maduración en Black Amber y Angeleno. La firmeza de pulpa disminuyó a velocidad constante. El ablandamiento en Angeleno fue lento (0,16 lb/día) y rápido, en Black Amber (0,36 lb/día) y Laroda (0,26 lb/día). El incremento de sólidos solubles fue escaso en Black Amber y mayor en cv. Laroda y Angeleno.

La tela antigranizo en la maduración de ciruelas japonesas : : Prunus salicina Lindl

Se evaluó el efecto de la tela antigranizo sobre la evolución de la maduración de las cv. Linda Rosa y Larry Ann de ciruelo japonés. Periódicamente se cosechó fruta de plantas uniformes: ambas situaciones bajo tela y sin protección. Los parámetros de madurez y calidad evaluados fueron: peso, diámetros, color de piel, firmeza de pulpa, contenido de sólidos solubles (CSS), acidez titulable (AT) y la relación CSS/AT. La tela afectó la calidad de los frutos. El contenido de solubles y el color piel de la cv. Linda Rosa y el tamaño de frutos de la cv. Larry Ann, atributos de calidad muy valorados, fueron menores en las plantas bajo tela.

Determinación de índices de cosecha y calidad en kiwi en el sudeste bonaerense (Argentina)

Se realizó un seguimiento de la maduración de kiwis (Actinidia celiciosa (A. Chev.) Liang et Ferguson cv. Hayward) en una plantación comercial del sudeste de la provincia de Buenos Aires (Argentina), con la finalidad de definir índices de madurez y calidad y compararlos con los estándares vigentes en Nueva Zelanda y Chile. A intervalo semanal, desde las 13 semanas después de plena floración, se tomaron muestras de frutos para evaluar las siguientes variables: peso fresco, volumen, porcentaje de semillas negras, contenido de materia seca, acidez titulable y pH. De acuerdo con los mismos, el valor mínimo de sólidos solubles y el porcentaje de semillas negras exigido se alcanzaron durante la semana 21 después de plena floración y la firmeza de pulpa presentaba aún valores superiores al umbral recomendado. El momento óptimo de cosecha correspondió a plena temporada. Los resultados sugieren que la acidez titulable podría constituir otro índice de madurez. El porcentaje de materia seca no sería útil en fruta de plena temporada dado que los incrementos significativos se registran tempranamente. Sin embargo, puede ser útil como índice de calidad. Se plantea la posibilidad de utilizar la relación MS/AT como índice de calidad y de cosecha.