Hydraulic Subsurface Measurements and Hydrodynamic Modeling as Indicators for Groundwater Flow Systems in the Rotondo Granite, Central Alps (Switzerland)

Regional groundwater flow in high mountainous terrain is governed by a multitude of factors such as geology, topography, recharge conditions, structural elements such as fracturation and regional fault zones as well as man-made underground structures. By means of a numerical groundwater flow model, we consider the impact of deep underground tunnels and of an idealized major fault zone on the groundwater flow systems within the fractured Rotondo granite. The position of the free groundwater table as response to the above subsurface structures and, in particular, with regard to the influence of spatial distributed groundwater recharge rates is addressed. The model results show significant unsaturated zones below the mountain ridges in the study area with a thickness of up to several hundred metres. The subsurface galleries are shown to have a strong effect on the head distribution in the model domain, causing locally a reversal of natural head gradients. With respect to the position of the catchment areas to the tunnel and the corresponding type of recharge source for the tunnel inflows (i.e. glaciers or recent precipitation), as well as water table elevation, the influence of spatial distributed recharge rates is compared to uniform recharge rates. Water table elevations below the well exposed high-relief mountain ridges are observed to be more sensitive to changes in groundwater recharge rates and permeability than below ridges with less topographic relief. In the conceptual framework of the numerical simulations, the model fault zone has less influence on the groundwater table position, but more importantly acts as fast flow path for recharge from glaciated areas towards the subsurface galleries. This is in agreement with a previous study, where the imprint of glacial recharge was observed in the environmental isotope composition of groundwater sampled in the subsurface galleries. Copyright © 2012 John Wiley & Sons, Ltd.

Bioaccessibility of trace elements in soils in Northern Ireland

Assessment of elevated concentrations of potentially toxic elements (PTE) in soils and the association with specific soil parent material have been the focus of research for a number of years. Risk-based assessment of potential exposure scenarios to identified elevated PTE concentrations has led to the derivation of site- and contaminant-specific soil guideline values (SGVs), which represent generic assessment criteria (GACs) to identify exceeded levels that may reflect an unacceptable risk to human health. A better understanding of the ‘bioavailable’ or ‘bioaccessible’ contaminant concentrations offers an opportunity to better refine contaminant exposure assessments. Utilizing a comprehensive soil geochemical dataset for Northern Ireland provided by the Tellus Survey (GSNI) in conjunction with supplementary bioaccessibility testing of selected soil samples following the Unified BARGE Method, this paper uses exploratory data analysis and geostatistical analysis to investigate the spatial variability of pseudo-total and bioaccessible concentrations of As, Cd, Co, Cr. Cu, Ni, Pb, U, V and Zn. The paper investigates variations in individual element concentrations as well as cross-element correlations and observed lithological/pedological associations. The analysis of PTE concentrations highlighted exceeded levels of GAC values for V and Cr and exceeded SGV/GAC values for Cd, Cu, Ni, Pb, and Zn. UBM testing showed that for some soil parent materials associated with elevated PTE concentrations e.g. the Antrim Lava Group with high Ni concentrations, the measured oral bioaccessible fraction was relatively low. For other soil parent materials with relatively moderate PTE concentrations, measured oral bioaccessible fraction was relatively high (e.g. the Gala Sandstone Group of the Southern Uplands-Down Longford Terrain). These findings have implications for regional human health risk assessments for specific PTEs.

Tracking clock-shifted homing pigeons from familiar release sites

Clock-shifted homing pigeons were tracked from familiar sites 17.1km and 23.5 km from the home loft in Pisa, Italy, using an on-board route recorder. At the first release site, north of home, the majority of clock-shifted birds had relatively straight tracks comparable with those of control birds, At the second release site, south of home, the clock-shifted birds deflected in the direction predicted for the degree of clock shift, with many birds travelling some distance in the wrong direction before correcting their course. The possible role of large-scale terrain features in homing pigeon navigation is discussed.

Comparison of passive millimeter-wave and IR imagery in a nautical environment

Results are presented from a trial in which a real-time passive millimetre-wave camera was mounted on a landing craft. The vessel was operated on rivers in the UK, and imagery of surrounding terrain, structures, obstacles and other vessels was obtained. An IR camera was also used, and the differences in signatures of various features are discussed. Opportunities for image fusion are highlighted.

How different are the correlates of onset and continuation of civil wars?

It is very common to analyse the factors associated with the onset and continuation of civil wars entirely separately, as if there were likely to be no similarity between them. This is an overstatement of the theoretical position, which has established only that they may be different (i.e. less than perfectly correlated). The hypothesis that the explanatory variables are the same is not theoretically excludable and is empirically testable, both for individual variables and for combinations of them. Starting from this approach yields a rather different picture of the factors associated with the continuation of civil wars, because the relatively small sample size means that confidence intervals on individual coefficients are wide in this case. It is shown here that country size, mountainous terrain and (in most datasets) ethnic diversity seem significant for the continuation of civil wars, starting from the null hypothesis that variables affect onset and continuation probabilities identically, rather than entirely independently. One variable that affects onset and continuation significantly differently is anocracy, which we find to matter only for onset. Civil war is more likely if it occurred two years previously, as well as one year previously, which indicates that wars are more likely to restart after only one year of peace, and also more likely to stop in their first year. The combined model strengthens the result that ethnic diversity matters (it is consistently significant across datasets, whereas it is not when onset is analysed separately), although in the UCD/PRIO dataset it is significant only for onset. By contrast, if continuation is analysed independently, virtually nothing is significant except a pre-1991 dummy and a dummy for civil war two years previously.

From inconsistency handling to non-canonical requirements management: A logical perspective

As a class of defects in software requirements specification, inconsistency has been widely studied in both requirements engineering and software engineering. It has been increasingly recognized that maintaining consistency alone often results in some other types of non-canonical requirements, including incompleteness of a requirements specification, vague requirements statements, and redundant requirements statements. It is therefore desirable for inconsistency handling to take into account the related non-canonical requirements in requirements engineering. To address this issue, we propose an intuitive generalization of logical techniques for handling inconsistency to those that are suitable for managing non-canonical requirements, which deals with incompleteness and redundancy, in addition to inconsistency. We first argue that measuring non-canonical requirements plays a crucial role in handling them effectively. We then present a measure-driven logic framework for managing non-canonical requirements. The framework consists of five main parts, identifying non-canonical requirements, measuring them, generating candidate proposals for handling them, choosing commonly acceptable proposals, and revising them according to the chosen proposals. This generalization can be considered as an attempt to handle non-canonical requirements along with logic-based inconsistency handling in requirements engineering.

Influence of molten-state annealing on the phase structure and crystallization behaviour of high impact polypropylene copolymer

The phase structure evolution of high impact polypropylene copolymer (IPC) during molten-state annealing and its influence on crystallization behaviour were studied. An entirely different architecture of the IPC melt was observed after being annealed, and this architecture resulted in variations of the crystallization behaviour. In addition, it was found that the core-shell structure of the dispersed phase was completely destroyed and the sizes of the dispersed domains increased sharply after being annealed at 200 degrees C for 200 min. Through examination of the coarseness of the phase morphology using phase contrast microscopy (PCM), it was found that a co-continuous structure and an abnormal 'sea-island' structure generally appeared with an increase in annealing time. The original matrix PP component appeared as a dispersed phase, whereas the copolymer components formed a continuous 'sea-island' structure. This change is ascribed to the large tension induced by solidification at the phase interface and the great content difference between the components. When the temperature was reduced the structure reverted to its original form. With increasing annealing time, the spherulite profiles became more defined and the spherulite birefringence changed from vague to clear. Overall crystallization rates and nucleation densities decreased, but the spherulite radial growth rates remained almost constant, indicating that molten-state annealing mainly affects the nucleation ability of IPC, due to a coarsened microstructure and decreased interface area. (C) 2011 Elsevier Ltd. All rights reserved.

Inclusive development? State-led land development model in New Town, Kolkata

Urban land development in India is changing under the auspices of economic liberalisation. Kolkata has been in the forefront of this transformation through development of new townships in the urban peripheries based on a distinctive state-led land development model. Within this context New Town, Kolkata (also known as Rajarhat) provides a highly illuminative case to articulate the ways in which the state is implementing its neoliberal agenda in land development. It rides on political and ideological high ground by seeking to create a ‘model development’ of state–market partnership for dual goals of fostering capitalist interest while fulfilling welfarist principles. Interesting insights have emerged that point to a policy paradox. On one hand, the process follows market principles of efficacy and efficiency; on the other hand, state’s keenness to extend control persists, thereby creating a highly uneven terrain for state–market interaction. New Town reflects a typical quasi-market condition shaped by the monopolistic state, the poorly structured role of the private sector, an absence of civic bodies, and minimal land and housing provision for the poor. In India, as internationally, the economic liberalisation market ideology is increasingly construed as good governance. In this context New Town is a step in the right direction, but the progress is patchy, uneven, and still evolving.

Remote Sensing and GIScience in Geomorphological Mapping

The rapid proliferation of remote sensing and geographic information systems (GIS) into geomorphologic mapping has increased the objectivity and efficiency of landform segmentation, measurement, and classification. The near ubiquitous presence of Earth-observing satellites provides an array of perspectives to visualize the biophysical characteristics of landscapes, access inhospitable terrain on a predictable schedule, and study landscape processes when conditions are hazardous. GIS technology has altered the analysis, visualization, and dissemination of landform data due to the shared theoretical concepts that are fundamental to geomorphology and GIScience. The authors review geospatial technology applications in landform mapping (including emerging issues) within glacial, volcanic, landslide, and fluvial research.

Regulating for mutual gains? Non-union employee representation and the Information and Consultation Directive

Interest in ‘mutual gains’ has principally been confined to studies of the unionised sector. Yet there is no reason why this conceptual dynamic cannot be extended to the non-unionised realm, specifically in relation to non-union employee representation (NER). Although extant research views NER as unfertile terrain for mutual gains, the paper examines whether NER developed in response to the European Directive on Information and Consultation (I&C) of Employees may offer a potentially more fruitful route. The paper examines this possibility by considering three cases of NER established under the I&C Directive in Ireland, assessing the extent to which mutual gains were achieved.

Stochastic and deterministic processes interact in the assembly of desert microbial communities on a global scale

Extreme arid regions in the worlds' major deserts are typified by quartz pavement terrain. Cryptic hypolithic communities colonize the ventral surface of quartz rocks and this habitat is characterized by a relative lack of environmental and trophic complexity. Combined with readily identifiable major environmental stressors this provides a tractable model system for determining the relative role of stochastic and deterministic drivers in community assembly. Through analyzing an original, worldwide data set of 16S rRNA-gene defined bacterial communities from the most extreme deserts on the Earth, we show that functional assemblages within the communities were subject to different assembly influences. Null models applied to the photosynthetic assemblage revealed that stochastic processes exerted most effect on the assemblage, although the level of community dissimilarity varied between continents in a manner not always consistent with neutral models. The heterotrophic assemblages displayed signatures of niche processes across four continents, whereas in other cases they conformed to neutral predictions. Importantly, for continents where neutrality was either rejected or accepted, assembly drivers differed between the two functional groups. This study demonstrates that multi-trophic microbial systems may not be fully described by a single set of niche or neutral assembly rules and that stochasticity is likely a major determinant of such systems, with significant variation in the influence of these determinants on a global scale.