991 resultados para TECHNOLOGICAL DEVELOPMENT
Resumo:
The characterization and identification of proteolytic bacteria from the gut of the velvetbean caterpillar (Anticarsia gemmatalis) were the objectives of this study. Twelve aerobic and anaerobic isolates of proteolytic bacteria were obtained from the caterpillar gut in calcium caseinate agar. The number of colony forming units (CFUs) of proteolytic bacteria was higher when the bacteria were extracted from caterpillars reared on artificial diet rather than on soybean leaves (1.73 +/- 0.35 X 10(3) and 0.55 +/- 0.22 X 10(3) CFU/mg gut, respectively). The isolated bacteria were divided into five distinct groups, according to their polymerase chain reaction restriction fragment-length polymorphism profiles. After molecular analysis, biochemical tests and fatty acid profile determination, the bacteria were identified as Bacillus subtilis, Bacillus cereus, Enterococcus gallinarum, Enterococcus mundtii, and Staphylococcus xylosus. Bacterial proteolytic activity was assessed through in vitro colorimetric assays for (general) proteases, serine proteases, and cysteine proteases. The isolated bacteria were able of hydrolyzing all tested substrates, except Staphylococcus xylosus, which did not exhibit serine protease activity. This study provides support for the hypothesis that gut proteases from velvetbean caterpillar are not exclusively secreted by the insect cells but also by their symbiotic gut bacteria. The proteolytic activity from gut symbionts of the velvetbean caterpillar is suggestive of their potential role minimizing the potentially harmful consequences of protease inhibitors from some of this insect host plants, such as soybean, with implications for the management of this insect pest species.
Resumo:
Kraft pulp is currently bleached largely by the elemental chlorine free (ECF) technology with oxygen, chlorine dioxide, and hydrogen as active agents. This technology brought about significant environmental improvements in relation to standard processes based on chlorine gas and hypochlorite, but there is still need for further improvements. This study presents a novel environmentally friendly bleaching stage - the so-called `hydrogen peroxide in supercritical carbon dioxide`, P((SC-CO2)) - that can be adapted to current ECF bleaching processes, with preference in cases where hydrogen peroxide is already used. In this study, the P((SC-CO2)) stage was evaluated as a replacement to the last peroxide stage of the D(EP)DP bleaching sequence and to the first peroxide stage of the D(EP)DP sequence, for an oxygen delignified eucalypt kraft-O(2) pulp. The P((SC-CO2)) stage was run with 0.5% hydrogen peroxide, at 15% consistency, 70 degrees C, and 73 bar. The reaction time was 30 min. The performances of regular P stages and the new P((SC-CO2)) stage were compared. Promising results were observed with the DEP((SC-CO2))DP sequence; the P((SC-CO2)) decreased kappa number from 2.7 to 2.1, and the hexenuronic acid groups from 17.0 to 12.4 mmol kg(-1). The P((SC-CO2)) stage showed poor performance when applied in the D(EP)DP((SC-CO2)) sequence. It is concluded that the process presents potential but requires further optimization to improve selectivity and efficiency.
Resumo:
The stabilization of alumina suspensions is key to the development of high-performance materials for the ceramic industry, which has motivated extensive research into synthetic polymers used as stabilizers. In this study, mimosa tannin extract and a chitosan derivative, that is, macromolecules obtained from renewable resources, are shown to be promising to replace synthetic polymers, yielding less viscous suspensions with smaller particles and greater fluidity, that is, more homogeneous suspensions that may lead to better-quality products. The functional groups of tannin present in mimosa extract and N,N,N-trimethylchitosan (TMC) are capable of establishing interactions with the alumina surface, thus leading to repulsion between the particles mainly due to steric and electrosteric mechanisms, respectively. The stabilization of the suspension induced by either TMC or mimosa tannin was confirmed by a considerable decrease in viscosity and average particle size, in comparison with alumina suspensions without stabilizing agents. The viscosity/average particle size decreased by 49/84% and 52/87% for suspensions with TMC and mimosa tannin, respectively. In addition, the increase in the absolute zeta potential upon addition of either TMC or mimosa tannin extract, especially at high pHs, points to an increased stability of the suspension. The feasibility of using derivatives of macromolecules from renewable sources to stabilize aqueous alumina suspensions was therefore demonstrated. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 117: 58-66, 2010
Resumo:
In recent times, increasing attention has been paid to the use of renewable resources particularly of plant origin keeping in view the ecological concerns, renewability and many governments passing laws for the use of such materials. On the other hand, despite abundant availability of lignocellulosic materials in Brazil, very few attempts have been made about their utilization, probably due to lack of sufficient structure/property data. Systematic studies to know their properties and morphology may bridge this gap while leading to value addition to these natural materials. Chemical composition, X-ray powder diffraction, and morphological studies and thermal behavior aspects in respect of banana, sugarcane bagasse sponge gourd fibers of Brazilian origin are presented. Chemical compositions of the three fibers are found to be different than those reported earlier. X-ray diffraction patterns of these three fibers exhibit mainly cellulose type I structure with the crystallinity indices of 39%, 48% and 50% respectively for these fibers. Morphological studies of the fibers revealed different sizes and arrangement of cells. Thermal stability of all the fibers is found to be around 200 degrees C. Decomposition of both cellulose and hemicelluloses in the fibers takes place at 300 degrees C and above, while the degradation of fibers takes place above 400 degrees C. These data may help finding new uses for these fibers. (C) 2009 Elsevier B.V. All rights reserved.
Resumo:
We employed the Density Functional Theory along with small basis sets, B3LYP/LANL2DZ, for the study of FeTIM complexes with different pairs of axial ligands (CO, H(2)O, NH(3), imidazole and CH(3)CN). These calculations did not result in relevant changes of molecular quantities as bond lengths, vibrational frequencies and electronic populations supporting any significant back-donation to the carbonyl or acetonitrile axial ligands. Moreover, a back-donation mechanism to the macrocycle cannot be used to explain the observed changes in molecular properties along these complexes with CO or CH(3)CN. This work also indicates that complexes with CO show smaller binding energies and are less stable than complexes with CH(3)CN. Further, the electronic band with the largest intensity in the visible region (or close to this region) is associated to the transition from an occupied 3d orbital on iron to an empty pi* orbital located at the macrocycle. The energy of this Metal-to-Ligand Charge Transfer (MLCT) transition shows a linear relation to the total charge of the macrocycle in these complexes as given by Mulliken or Natural Population Analysis (NPA) formalisms. Finally, the macrocycle total charge seems to be influenced by the field induced by the axial ligands. (C) 2011 Elsevier Ltd. All rights reserved.
Resumo:
Two-dimensional and 3D quantitative structure-activity relationships studies were performed on a series of diarylpyridines that acts as cannabinoid receptor ligands by means of hologram quantitative structure-activity relationships and comparative molecular field analysis methods. The quantitative structure-activity relationships models were built using a data set of 52 CB1 ligands that can be used as anti-obesity agents. Significant correlation coefficients (hologram quantitative structure-activity relationships: r 2 = 0.91, q 2 = 0.78; comparative molecular field analysis: r 2 = 0.98, q 2 = 0.77) were obtained, indicating the potential of these 2D and 3D models for untested compounds. The models were then used to predict the potency of an external test set, and the predicted (calculated) values are in good agreement with the experimental results. The final quantitative structure-activity relationships models, along with the information obtained from 2D contribution maps and 3D contour maps, obtained in this study are useful tools for the design of novel CB1 ligands with improved anti-obesity potency.
Resumo:
Citrus sudden death (CSD) is a new disease of sweet orange and mandarin trees grafted on Rangpur lime and Citrus volkameriana rootstocks. It was first seen in Brazil in 1999, and has since been detected in more than four million trees. The CSD causal agent is unknown and the current hypothesis involves a virus similar to Citrus tristeza virus or a new virus named Citrus sudden death-associated virus. CSD symptoms include generalized foliar discoloration, defoliation and root death, and, in most cases, it can cause tree death. One of the unique characteristics of CSD disease is the presence of a yellow stain in the rootstock bark near the bud union. This region also undergoes profound anatomical changes. In this study, we analyse the metabolic disorder caused by CSD in the bark of sweet orange grafted on Rangpur lime by nuclear magnetic resonance (NMR) spectroscopy and imaging. The imaging results show the presence of a large amount of non-functional phloem in the rootstock bark of affected plants. The spectroscopic analysis shows a high content of triacylglyceride and sucrose, which may be related to phloem blockage close to the bud union. We also propose that, without knowing the causal CSD agent, the determination of oil content in rootstock bark by low-resolution NMR can be used as a complementary method for CSD diagnosis, screening about 300 samples per hour.
Resumo:
The cancer risks (CR) by oral ingestion, dermal absorption, and inhalation exposure of trihalomethanes (THM) from tap water of ten districts in Fortaleza, Brazil were estimated. The mean levels of THM compounds were obtained in Fortaleza tap water as follow: 63.9 mu g L(-1) for chloroform (CHCl(3)), 40.0 mu g L(-1) for bromodichloromethane (CHBrCl(2)), and 15.6 mu g L(-1) for dibromochloromethane (CHBr(2)Cl). Bromoform (CHBr(3)) was not detected. The mean CR for THMs in tap water is 3.96 x 10(-4). The results indicate that Fortaleza residents have a higher CR by inhalation than dermal absorption and oral ingestion. The CR for CHCl(3) contributes with 68% as compared with the total CR, followed by CHBrCl(2) (21%), and CHBr(2)Cl (11%). The hazard index (HI) is about ten times lower than unity, not indicating non-cancer effects.
Resumo:
Text messaging is a new form of writing, brought about by technological development in the last couple of decades. Mobile phone usage has increased rapidly worldwide and texting is now part of many people's everyday communcation. A large number of users send or receive texts which include some abbreviations and shortenings, commonly referred to as textspeak. This novel linguistic phenomenon is perceived by some with indifference and by others with aggravation. The following study examines attitudes towards this linguistic change from a gender and age perspective. The comparison between two groups show that the most conservative and least positive to change are young women. The analysis and discussion around this focuses on power, prestige and patterns.
Resumo:
Este relatório refere-se à primeira parte de uma pesquisa financiada pelo Núcleo de Pesquisas e Publicações (GV-PESQUISA) da EAESP-FGV e apoiada pelo Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq). Trata-se dos determinantes do desempenho de novos produtos, um tema ainda pouco estudado no Brasil, a partir de um modelo integrativo das concepções de INGENBLEEK, DREBUYNE, FRAMBACH & VERHALLEN (2004) e HENARD & SZYMANSKI (2001). Formou-se uma amostra de 109 gerentes de produto e diretores de marketing de empresas estrangeiras atuando no Brasil. O Desempenho do Novo Produto apresentou uma relação significativa e positiva com Orientação para o Mercado e Processo de Desenvolvimento de Novos Produtos. O Desempenho de Mercado do Novo Produto mostrou uma relação significativa e positiva com Características dos Processos da Empresa, Vantagem Relativa do Novo Produto e Características do Mercado. O Desempenho Financeiro do Novo Produto apareceu com uma relação significativa com Características dos Processos da Empresa (positiva), Características Estratégicas da Empresa (positiva) e Incerteza da Demanda (negativa). Ao final, são apontadas e discutidas, de modo preliminar, as limitações, conclusões e implicações da pesquisa.
Resumo:
Este estudo avalia a influência do desenvolvimento tecnológico sobre o social, a partir das atividades produtivas desenvolvidas na unidade agroindustrial Recanto lI, no município de Catolé do Rocha, com o apoio da Incubadora Tecnológica de Campina Grande - ITCG, e o Programa de Estudos e Ações no Semi-Árido Paraibano da Universidade Federal de Campina Grande - PEASAlUFCG. Os problemas sociais no semi-árido surgiram por condições ambientais adversas e se intensificaram pela falta de políticas públicas adequadas à educação e ao desenvolvimento da região. O problema é expresso pela seguinte indagação: Qual a influência entre o desenvolvimento tecnológico e o desenvolvimento social gerados a partir da atividade produtiva da Incubadora de Campina Grande, em Campina Grande, Paraíba? A relevância deste trabalho vem da pretensão em colaborar para o estudo da relação entre desenvolvimento tecnológico e social, numa tentativa de tornar inteligível a necessidade de educação e inovação tecnológica para o desenvolvimento social, principalmente em países não desenvolvidos. Vem também da utilidade para a formulação de políticas públicas e estratégias de desenvolvimento tecnológico, identificando ações e medidas de desempenho, voltadas ao diagnóstico da contribuição das incubadoras tecnológicas para o bem-estar da sociedade. O referencial teórico foi composto pela análise da função das racionalidades dos diversos agentes sociais e de sua contribuição para as interações sociais, além da análise das realidades culturais da sociedade empresariada, do Estado e das incubadoras tecnológicas. A metodologia se utilizou da pesquisa descritiva e explicativa, de campo, documental, bibliográfica e estudo de caso. O universo foram as pessoas que compõem a ITCG e a amostra foram o diretor da Incubadora, o cientista da UFCG e o líder comunitário de Recanto lI. Os sujeitos da pesquisa confundem-se com a amostra. A coleta de dados se deu por meio da literatura sobre a temática e de inserções no campo de estudo. O tratamento de dados se utilizou da análise qualitativa do fenômeno. As principais limitações do método consistiram na coleta, no tratamento dos dados, e na utilização do estudo de caso, com possibilidade de compreensão tendenciosa do fenômeno estudado. O referencial prático apresenta o resultados da pesquisa, avaliando-os por meio da comparação com o referencial teórico estudado. Tem-se como resultados que a ITCG agiu articulando os grupos e traduzindo as realidades culturais de cada agente em prol do desenvolvimento de comunidades agroindustriais em situação de risco social, devido à problemática da seca. A ITCG atuou como alfabetizadora social ensinando aos agentes sociais os códigos culturais dos demais grupos. As desigualdades que existiam entre o cientista e o sertanejo, aprofundadas pelo vexatório histórico de escravidão do homem do campo no nordeste brasileiro, foram minimizadas pela educação dada pelo próprio cientista. A Universidade contribuiu para a redução do analfabetismo ambiental, onde o meio ambiente era tido como o principal rival do homem do sertão. O Estado, quando atua em parceria com os demais agentes sociais consegue, manter-se como o principal instrumento dos cidadãos para controlar a globalização em função de seus valores e interesses. Na ITCG o ambiente de incubação é educacional, onde os novos empreendedores são postos em contato com a realidade cultural do empresariado, do Estado e de outras comunidades da sociedade, seguindo modelos meramente educacionais. Como conclusão tem-se que a trajetória dos cidadãos de Recanto II - de escravos a exportadores - foi baseada em dois grandes tesouros, a família e areligião. O mérito da ITCG foi compreender, respeitar e preservar a realidade cultural de Recanto 11 e incentivar a interação social com outras realidades culturais capazes de gerar desenvolvimento naquela região. A saúde, o desenvolvimento infantil, a segurança, a habitação foram conquistas de Recanto 11. Como sugestão tem-se que as políticas públicas deveriam reproduzir este ambiente de desenvolvimento para todos os cidadãos brasileiros em situação de risco social, utilizando-se da família como base para interações sociais fluidas e harmônicas entre os diversos agentes sociais.
Resumo:
Accordingly, a variety of firms's technological capabilities studies, the literature recently is still lacking about the dynamic of sector evolution and technological development in inter-firm and their implication for technical and economical financial performance. More lacking is the research catching up the evolution of industrial sectors after the institutional reforms in the 90. For that, the focus of the dissertation is to analyze the main of the evolution of the pulp and paper industry from 1970 to 2004, using as reference points the import-substitution policy and the economic deregulation of the 1990s. Futhermore, the work tries to evaluate how such changes at industry level have been perceived from a firm point of view in terms of accumulation of technological capabilities and improvement of economic financial performance. This linkage is tested and examined in the following firms: Aracruz (Barra do Riacho establishment ), Klabin (Monte Alegre establishment) e Votorantim Celulose e Papel ¿ VCP (Jacareí establishment), defining the same time period of sectoral level. As far as the industry level study is concerned, it is based on the average rate of annual growth of some selected variables, given that the technological capabilities test is performed according to the methodology already existing in the literature, but properly adapted to the pulp and paper case. Similarly, the analysis regarding the improvement of the economic financial performance is based on a set of industry specific indicators. Hence, the work is built upon multiple case studies, taking into account both the qualitative and quantitative evidence, i.e. interviews, direct observations, as well as firm reports. Finally, it is worth emphasizing as the analysis of the changes in the sector, in conjunction with the above mentioned methodology used to measure the technological capabilities in the context of an evolving industrial regime, is still lacking in emerging economies as well as in Brazil. According to the empirical evidence, the reforms of the 1990s had a positive impact on the industrial development, from both the national and international viewpoint. Such a transformation was evident at firm level in terms of accumulation of technological capabilities and improvement of economic financial indicators. Indeed, the results show that the speed of accumulation of technological capabilities within the firms influences positively the performance indicators. On the other hand, these are also related to external factors, such as the macroeconomic conditions, which as such have not been considered in details.
Resumo:
This study aims at understanding the entrepreneurial process and the capacity of the incubators of promoting the technical training of the entrepreneurs as well as developing projects, turning them into prosperous companies. The bibliography about this topic is recent and it is based on actual cases and experiences. The development of the sector is quite big and has been happening with a certain speed, creating a demand for studies and scientific production. Due to the fact that it is an exploratory research, the chosen method was the case study, from which we aim at obtaining current information, representative of the reality. The universe of this research will be the incubators of companies that have a technological basis, the sample of which being the companies that are in the ¿Gênesis Institute¿, the incubator of companies of PUC-RIO. From the results, it will be possible to see entrepreneurial processes, training of businessmen, technological development and generation of prosperous companies. The theoretical reference presents the concepts of entrepreneurialship and IEBTs.
Resumo:
This dissertation aims at examining empirical evidences obtained in the light of taxonomies and strategies for measuring firms technological capabilities and innovation in the context of developing countries, motivated by the fact that debates and studies directed to innovation has been intensified, for the last thirty years, by the recognition of its vital and growing importance to the technological, economic, competitive and industrial development of firms and countries. Two main tendencies can be identified on this debate. At one side, it¿s the literature related to the developed countries logic, whose companies are, in majority, positioned at the technological frontier, characterized by the domain of innovative advanced capabilities, directed to its sustaining, deepening and renewal. At the other side, there are the perspectives directed to the developing countries reality, where there is a prevalence of companies with deficiency of resources, still in process of accumulating basic and intermediate technological capabilities, with characteristics and technological development trajectories distinct or even reverse from those of developing countries. From this last tradition of studies, the measuring approaches based in C&T indicators and in types and levels of technological capabilities stand out. The first offers a macro level, aggregated perspective, through the analysis of a representative sample of firms, seeking to the generation of internationally comparable data, without addressing the intraorganizational specificities and nuances of the paths of technological accumulation developed by the firms, using, mostly, R&D statistics, patents, individual qualifications, indicators that carry their own limitations. On the other hand, studies that examine types and levels of technological capabilities are scarce, usually directed to a small sample of firms and/or industrial sectors. Therefore, in the light of the focus and potentialities of each of the perspectives, this scenario exposes a lack of studies that examine, in a parallel and complementary way, both types of strategies, seeking to offer more realistic, consistent and concrete information about the technological reality of developing countries. In order to close this gap, this dissertation examines (i) strategies of innovation measurement in the contexts of developing countries based on traditional approaches and C&T indicators, represented by four innovation surveys - ECIB, PINTEC, PAEP and EAI, and, (ii) from the perspective of technological capabilities as an intrinsic resource of the firm, the development of which occurs in a cumulative way and based on learning, presents and extracts generalizations of empirical applications of a metric that identifies types and levels of technological capabilities, through a dynamic and intra-firm perspective. The exam of the empirical evidences of the two approaches showed what each one of the metrics are capable to offer and the way they can contribute to the generation of information that reflect the technological development of specific industrial sectors in developing countries. In spite of the fact that the focus, objective, perspective, inclusion, scope and lens used are substantially distinct, generating, on a side, an aggregated view, and of other, an intra-sector, intra-organizational and specific view, the results suggest that the use of one doesn't implicate discarding or abdicating the other. On the contrary, using both in a complementary way means the generation of more complete, rich and relevant evidences and analysis that offer a realistic notion of the industrial development and contribute in a more direct way to the design of corporate strategies and government policies, including those directed to the macro level aspects just as those more specific and focused, designed to increment and foment firms in-house innovative efforts.
Resumo:
Esta dissertação examina o relacionamento entre o acúmulo de capacidades tecnológicas e os mecanismos de aprendizagem tecnológica em subsidiárias de empresas multinacionais inseridas em economias em desenvolvimento. Este relacionamento é analisado por meio de estudo de caso comparativo de duas subsidiárias do setor de tecnologia da informação e comunicação brasileiro, de diferente países de origem, para as tecnologias associadas ao acesso à internet em alta velocidade, no período de 2004 a 2009. A literatura referente ao desenvolvimento de capacidades tecnológicas em organizações inseridas em economias emergentes evoluiu consideravelmente nos últimos anos, descrevendo vários exemplos da evolução destas capacidades tecnológicas. Porém, ainda são raros os estudos que examinam este processo em subsidiárias de empresas multinacionais presentes em economias emergentes e,mais raros ainda, os estudos que examinam os relacionamentos entre estas trajetórias de acumulação e os seus mecanismos de aprendizado em duas subsidiárias. Com o objetivo de contribuir para o preenchimento dessa lacuna, esta pesquisa buscou enriquecer este debate baseando-se em evidências empíricas primárias e secundárias, para explorar este relacionamento com bastante profundidade e pôde verificar que: 1. Em ambas as subsidiárias pesquisadas houve acumulação de capacidades tecnológicas. Porém, houve uma forte distinção entre estas empresas estudadas em termos da natureza e velocidade de acumulação de capacidades tecnológicas. 2. Também pôde-se identificar um intenso uso de mecanismos intra-organizacionais de fontes internas e de interorganizacionais de fontes externas de aprendizagem tecnológica. Porém, esta característica também apresentou uma grande variabilidade de diversidade e intensidade do uso destes mecanismos, para acumulação de capacidades tecnológicas ao nível da subsidiária. E, a partir destas evidências, pode-se concluir que os diferentes mecanismos de aprendizado tecnológico utilizados pelas organizações inseridas em economias em desenvolvimento desempenham um papel de fundamental relevância não somente para a natureza das capacidades tecnológicas acumuladas, mas também para a intensidade de acumulação. Assim, desta conclusão pode-se interpretar que a Alcatel-Lucent, através de seus esforços de aprendizado tecnológico, está melhor preparada para um contexto competitivo caracterizado por inovações tecnológicas que a ZTE Corporation. Mas este contexto competitivo muitas vezes não se forma em economias emergentes, como a brasileira, que devido à baixa competição e uma crescente necessidade de resultados econômicos de curto prazo faz com que a opção por empresas com o enfoque de custos (ou capacidades operacionais) seja mais valorizada do que empresas com o enfoque de desenvolvimento de capacidades inovadoras capazes de produzir tecnologias. Logo, os resultados desta dissertação sugerem aos gestores destas empresas: (1) a necessidade de um contínuo engajamento em busca de novas fontes de aprendizado tecnológico interno e externo às suas respectivas organizações, de forma a sustentar e acumular novas capacidades tecnológicas operacionais e inovadoras, (2) a importância da qualidade e intensidade dos diversos tipos de relacionamentos e interações internos e externos a estas organizações, de forma a intensificar estes relacionamentos de aprendizado em tecnologias inexistentes nestas organizações. Os resultados desta dissertação também permitem apontar sugestões para gestores governamentais, visto que, no “Plano Nacional de Banda larga”, em desenvolvimento pelo governo federal brasileiro, (1) deve-se incentivar o fortalecimento das parcerias e interações entre as diversas organizações do setor, como as subsidiárias de EMN, as operadoras e centros tecnológicos e universidades locais, de forma a criar projetos mútuos de pesquisa e desenvolvimento de novas tecnologias no setor e, por conseqüência, um maior desenvolvimento tecnológico setorial e (2) buscar através da regulação do setor, que as empresas sejam incentivadas a buscar novos e melhores mecanismos de aprendizagem de forma a consolidar e evoluir as suas capacidades tecnológicas, visando o desenvolvimento tecnológico setorial.