The effect of vitamins C and E on some of growth factors of cultured Acipenser ruthenus

The effect of vitamins C and E on some of growth factors of cultured Acipenser ruthenus was studied in this thesis. For this purpose diets supplemented with a combination of 100 and 400 mg/kg vitamin C, L-ascorbyl-2-polyphosphate and 100 and 400 mg/kg vitamin E, D-alpha-tocopherol,were each fed to sterlet in 2 replications for 15 weeks. Fifteen fish with average weight of 350.92±14.28 gr were distributed to each of 18 tanks after adaptation with experimental diet. After 5 weeks, there were significant differences in RBC, ESR, HCT and differential counting of white blood cells among the treatments (P<0.05), but there was no significant difference in the amount of WBC among the treatments (P>0.05). After 10 weeks, there were significant differences in the amounts of Monocytes, Lymphocytes and Eosinophils (P<0.05), but there was no significant differences in the amount of other hematologic factors (P>0.05). At the end of the experiment (15th week) only WBC, RBC, Monocyte, lymphocyte and neutrophil showed significant differences between the treatments (P<0.05) and other hematologic factors did not show any significant differences between the treatments (P>0.05). The results of biochemical indices analysis showed significant differences (P<0.05) among treatments for all of the parameters for 5th weeks, total protein and glucose for 10th week and only cholesterol for 15th week. The carcass analysis at the end of experiment showed that only the amount of carbohydrate, protein and ash were significantly difference between the treatments (P<0.05). The results of growth parameters at the end of 3th, 9th, 12th and 15th week showed significant differences between the treatments (P<0.05), but at the end of 6th week only GR was significantly different between the treatments (P<0.05). After concerning acute stress test including reduce water volume, cutting the aeration for 30 minutes at the end of experiment, cortisol and glucose significantly increased (P<0.05) compared with prestress period, but the lowest response to the stressor was observed in fish fed by E400 C 400 mg/kg. On the other hand the survival was 100% during the experiment and no mortality was occurred during this period. Results of this study indicate that Vitamins C and E can have remarkable effects on hematological, biochemical and growth indices in different growth periods. So regarding the effects of vitamin C and E on some growth indices, it seems that the diet containing E400 C 100 mg/kg can be considered as the optimum diet in the rearing condition for this weigth range of fish.

Effect of butachlor on spermatogenesis, testosterone amount and testes tissue Rutilus frisii kutum Kamenskii 1901

Morphological assessment of sexually mature Rutilus frisii kutum Kamenskii 1901 caught from the rivers (Shirud, Khoshkrud, Sepidrud and Chelavand Rivers) flowing in the southwest Caspian Sea region was conducted and sperm volume, total sperm count and sperm concentration of abnormal sperms were determined after exposing the spawners to 60% herbicide butachlor (machete). Spawners under study were maintained in tanks (1000 l) at the Shahid Ansari Teleost Fish Hatchery and exposed to two different concentrations (25% and 75% of its LC50 value) of butachlor. Results obtained indicate that exposure to high butachlor toxicity (75% of its LC50 value) decreased sperm volume to 0.61 ± 0.42 cc in 2-3 year old fishes and to 0.55 ± 0.42 cc in fishes above 3 years of age, while that in fish exposed to low butachlor toxicity (25% of its LC50 value) decreased to 1.55 ± 0.42 cc in 2-3 year old fishes and to 1.28 ± 0.42 cc in fishes above 3 years of age. The sperm volume under normal conditions in R. frisii kutum is 4.6 ± 0.42 cc in 2-3 year olds and 4.58 ± 0.42 cc in fishes above 3 years of age. The total sperm count in R. frisii kutum is 39.74 ± 2.5 billion spermatozoa/cc in 2-3 year olds and 42.99 ± 2.5 billion spermatozoa/cc in fishes above 3 years of age. When exposed to high butachlor toxicity, total sperm count dropped to 16.92 ± 2.5 billion spermatozoa/cc in 2-3 year olds and to 15.98 ± 2.5 billion spermatozoa/cc in fishes above 3 years of age. Similarly total sperm count in R. frisii kutum exposed to low butachlor toxicity was recorded as 23.6 ± 2.5 billion spermatozoa/cc in 2-3 year olds and 29.4 ± 2.5 billion spermatozoa/cc in fishes above 3 years of age. Under normal conditions, on the basis of morphology, spermatozoa showed only 10 ± 1.92% of abnormal sperms. The number of abnormal sperms increased by 28.6 ± 1.92% in fishes exposed to high butachlor toxicity, while that in fishes exposed to low butachlor toxicity increased by 19.7 ± 1.92% in 2-3 year olds and 16.6 ± 19.2% in fishes above 3 years of age. It is evident from the results obtained that increase in level of pollution caused a decrease in sperm volume but an increase in the percentage of abnormal sperms. Results obtained indicate that exposure to high butachlor toxicity (75% of its LC50 value) decreased testostron hormone to 0.31 ± 0.22 ng/ml in high butachlor toxicity, and to 0.45 ± 0.22 ng/ml in low butachlor toxicity (25% of its LC50 value). Testostron hormone dropped to 0.53 ± 0.22 ng/ml in 2-3 year olds and to 0.79 ± 0.22ng/ in fishes above 3 years of age. The testostron hormone under normal conditions in R. frisii kutum is 2.7 ± 0.22 ng/ml. It is evident from the results obtained that increase in level of pollution caused a decrease in testostron hormone

The study of different protein in diet and water salinity on growth and survival rate in Pacific white shrimp (Litopenaeus vannamei)

In this research reared white western shrimp (Litopenaeus vannamei ,Boone, 1931) with five diet with five different protein level contain 20%, 25%, 30%, 35% and 40% and three salinity level contain 15-17 ppt, 27-30 ppt,and 40-45 ppt researched protein percent effect and water salinity on growth, survival, feed conversion ratio, hemolymph osmolatity, hemolymph protein and corpse protein contain. In this research was 15 sorrow with 3 repeat and used from 45 tanks with 300 liters capacity. Shrimps first weight average was about 2 grams and after 60 days culture cropped down results: Shrimps biomass growth in 15-17 ppt salinity was higher than anther salinities who had meaning different with growth in 40-45 ppt salinity ( p< 0.05). But hadn’t meaning different with growth 27-30 ppt salinity. survival rate in 15-17 ppt salinity was 97.03 who was lower than another salinities. survival percent in 24-30 ppt salinity and 40-45 ppt salinity was 99.33% Highest biomass growth in different diets was in diet number 5 with 40 percent protein that it had meaning different with another diets (p<0.05) . although with informed to product expense in different diets. One kilogram shrimp product expense in different diets hadn’t meaning different (P<0.05) Survival rate in different diets hadn’t meaning different lowest feed conversion ratio was 1.67 in 15-14 salinity that hadn’t meaning different with another salinities also corpse protein quantity in different salinities and different diets hadn’t meaning different. Hemolymph Osmolality in 15-17 ppt salinity was 573.88 mOsm/kg had meaning different with hemolymph osmolality in 27-30 ppt salinity that was 650. 380 mOsm/kg and in 40-45 ppt salinity was 630.38 mOsm/kg. Hemolymph protein in 15-17 ppt salinity was 124.72 mg/ml had meaning different with hemlymph protein in 27-30 ppt salinity that was 136.52 mg/ml but hadn’t meaning different with hemolymph protein in 40-45 ppt salinity that was 128.84 mg/ml. Hemolymph protein in different diets hadn’t meaning different (p<0.05). Keywords: shrimp, Litopenaeus vannamei, protein , salinity, growth, survival rate, FCR, hemolymph osmolality, hemolymph protein.

Evaluate the efficiency of hydrogen peroxide and levaemisole hydrochloride in the treatment of Persian sturgeon, Chinese carp eggs and juveniles

During a two years research hydrogen peroxide efficacy evaluated for Persian sturgeon, Chinese carps and common carp eggs. These series of the experiments conducted in various conditions different concentration of hydrogen peroxide include 250, 500, 750, 1,000 1,500 2,000 3,000 and 9,000 PPM used as ten and fifteen minutes baths, compared with Malachite green and natural control . In the next phase effect of Levaemisole hydrochloride as an immunostimulator which applied as 5 mg/I in twenty minutes baths from day sixth after hatch evaluated by daily mortality rate and leukocytes counts. The results shown that according fertilization percent and temperature condition hydrogen peroxide at 1,000 and 1,500 PPM concentrations is a effective antifungal agent during incubation periods of Persian sturgeon and even sometimes increasing hatching rates significantly comparing with natural controls and Malachite green. In Chinese carps although hydrogen peroxide controls water molds but it is not recommended in high temperatures because it make shortened incubation time and mold infections will decrease. Also the results shown 750 PPM concentration of hydrogen peroxide in common carp eggs controls water moulds infections and increase hatching rate significantly comparing with Malachite green and natural control. Daily mortality rates accessing of Persian sturgeon fries show that 20 minutes baths of 5mg/1 levamisole hydrochloride decreases daily mortality rate during yolk sac absorption. Nitrogenous compounds: nitrate and ammonium differ significantly between treated tanks with control. Blood leucocytes concentrations as an immune index was different significantly in treated fishes by levamisole hydrochloride comparing with controls. In Chinese carps because yolks sac absorption time is short there is not necessary to use the levamisole hydrochloride. Although treated larvae were more active than controls. As a result our suggestions is to use hydrogen peroxide in Persian sturgeon and common carp artificial propagation and also suggest the use levamisole hydrochloride for Persian sturgeon beside management method in stress and pollution condition

Interactions of dietary levels of protein and energy on rainbow trout (Oncorhynchus mykiss) in desert brackish water

A 3x3 factorial experiment was conducted to determine the optimum protein to energy (P/E) ratio for rainbow trout in brackish water. Three crud protein levels and three energy levels at each protein level were utilized. Diets were made in semi-purified that in all of them fish meal, casein and gelatin as the sources of protein and dextrin, starch and oil as the sources of energy were used. Each of experimental diets was fed to triplicate groups of 20 fish with an average individual weight of 81.5 g in 9 2000-1 flow trough fiberglass tanks. During this experiment water temperature, dissolved oxygen, PH and EC were 15±2°C, 6.5-8.1 mg/1, 7.7-8.6 and 25400 grills respectively. The diets were fed at a rate between 1.6-2 wet body weight% per day depended to water temperature in three equal rations and adjusted two weekly for 84 days. At each of protein levels, weight gain percent (%WG), average daily growth percent (%ADG), protein efficiency ratio (PER), apparent net protein utilization percent (%ANPU), or percent of protein deposited, specific growth rate (SGR) and condition factor (CF) were found to increase and food conversion ratio (FCR) was found to decrease with an increasing energy levels from 370 to 430 Kcal/100g. Fish fed a 35% protein, 430 Kcal/100g energy diet with a P/E ratio of 81.4 mg protein/ Kcal PFV energy, attained the best growth performance. Fat and moisture of carcass were affected by protein and energy levels of test diets while protein and ash of carcass were relatively constant in different treatments.

Notes on the larval rearing scheme at SEAFDEC/AQD

For tiger shrimp, milkfish, and sea bass, larval rearing starts with the hatching of artificially spawned eggs. The eggs are stocked in larval rearing tanks, hatched, and metamorphosed larvae are fed and reared with good water management. Fry are harvested after about 30 days.

Updates in the Philippines: Where are the captive milkfish breeders?

A map is provided showing the location of milkfish rearing facilities in the Philippines. Most of the 17,443 milkfish broodstocks are located in central Philippines. A table shows details as to the rearing facility (cage, pen, pond, tank), number of broodstocks, and age. There are 13,420 broodstocks in ponds; 2,081 in cages; 842 in tanks, and 1,100 in pens. The youngest is 3 years, the oldest 23 years old.

Aquaculture potential of ornamental fishes of Uganda

Preliminary studies undertaken to investigate the availability of ornamental fish species in Uganda’s natural water systems, revealed significant abundance of coloured fishes in Uganda’s water systems including the Kyoga and Victoria Lake system. These species are able to breed in captivity and to feed on artificial diets in ponds and glass tanks. The species are attractive and are highly marketable. These observations indicate the potential to culture ornamental fishes as away of diversifying the range of aquaculture species, a means to generate income and to improve livelihoods in Uganda.

Improving co-development through process alignment

There has been a recent surge of enthusiasm icithin tlie automotive industry to build closer supplier relationships idthin the area of product development. One concept deemed central to these relationships is the alignment of development processes between the collaborating organizations, an area that is expanded upon idthin this paper. We suggest that synchronization can be achieved through the four key steps of process standardization, knowledge sliaring, alignment of existing practices, and continuous elimination oftcaste idthin the joint development cycles. A methodology for implementing these stages is presented along idth the underlying prindples on which it is based - the importance of joint teamworking and multi-company involvement idthin the alignment process is higlilighted. © MCB University Press.

Unstable behavior of low and high speed compressors

By far the greater part of our understanding about stall and surge in axial compressors comes from work on low-speed laboratory machines. As a general rule, these machines do not model the compressibility effects present in high-speed compressors and therefore doubt has always existed about the application of low-speed results to high-speed machines. In recent years interest in active control has led to a number of studies of compressor stability in engine type compressors. This paper presents new data from an eight-stage fixed geometry engine compressor and compares this with low-speed laboratory data.

Stall warning by blade pressure signature analysis

At low mass flow rates axial compressors suffer from flow instabilities leading to stall and surge. The inception process of these instabilities has been widely researched in the past - primarily with the aim of predicting or averting stall onset. In recent times, attention has shifted to conditions well before stall and has focussed on the level of irregularity in the blade passing signature in the rotor tip region. In general, this irregularity increases in intensity as the flow rate through the compressor is reduced. Attempts have been made to develop stall warning/avoidance procedures based on the level of the flow irregularity, but little effort has been made to characterise the irregularity, or to understand its underlying causes. Work on this project has revealed for the first time that the increase in irregularity in the blade passing signature is highly dependent on both tip-clearance and eccentricity. In a compressor with small, uniform, tip-clearance, the increase in blade passing irregularity which accompanies a reduction in flow rate will be modest. If the tip-clearance is enlarged, however, there will be a sharp rise in irregularity at all circumferential locations. In a compressor with eccentric tip-clearance, the increase in irregularity will only occur in the part of the annulus where the tip-clearance is largest, regardless of the average clearance level. In this paper, some attention is also given to the question of whether this irregularity observed in the pre-stall flow field is due to random turbulence, or to some form of coherent flow structure. Detailed flow measurements reveal that the latter is the case. From these findings, it is clear that a stall warning system based on blade passing signature irregularity will not be viable in an aero-engine where tip-clearance size and eccentricity change during each flight cycle and over the life of the compressor. Copyright © 2011 by ASME.

Stall Warning by Blade Pressure Signature Analysis

At low mass flow rates, axial compressors suffer from flow instabilities leading to stall and surge. The inception process of these instabilities has been widely researched in the past---primarily with the aim of predicting or averting stall onset. In recent times, attention has shifted to conditions well before stall and has focused on the level of irregularity in the blade passing signature in the rotor tip region. In general, the irregularity increases in intensity as the flow rate through the compressor is reduced. Attempts have been made to develop stall warning/avoidance procedures based on the level of flow irregularity, but little effort has been made to characterize the irregularity itself, or to understand its underlying cause. Work on this project has revealed for the first time that the increase in irregularity in the blade passing signature is highly dependent on both tip-clearance size and eccentricity. In a compressor with small, uniform, tip-clearance, the increase in blade passing irregularity that accompanies a reduction in flow rate will be modest. If the tip-clearance is enlarged, however, there will be a sharp rise in irregularity at all circumferential locations. In a compressor with eccentric tip-clearance, the increase in irregularity will only occur in the part of the annulus where the tip-clearance is largest, regardless of the average clearance level. In this paper, some attention is also given to the question of whether the irregularity observed in the prestall flow field is due to random turbulence or to some form of coherent flow structure. Detailed flow measurements reveal that the latter is the case. From these findings, it is clear that a stall warning system based on blade passing signature irregularity would be difficult to implement in an aero-engine where tip-clearance size and eccentricity change during each flight cycle and over the life of the compressor. © 2013 American Society of Mechanical Engineers.

Density stratified environments: The double-tank method

We present an alternative method of producing density stratifications in the laboratory based on the 'double-tank' method proposed by Oster (Sci Am 213:70-76, 1965). We refer to Oster's method as the 'forced-drain' approach, as the volume flow rates between connecting tanks are controlled by mechanical pumps. We first determine the range of density profiles that may be established with the forced-drain approach other than the linear stratification predicted by Oster. The dimensionless density stratification is expressed analytically as a function of three ratios: the volume flow rate ratio n, the ratio of the initial liquid volumes λ and the ratio of the initial densities ψ. We then propose a method which does not require pumps to control the volume flow rates but instead allows the connecting tanks to drain freely under gravity. This is referred to as the 'free-drain' approach. We derive an expression for the density stratification produced and compare our predictions with saline stratifications established in the laboratory using the 'free-drain' extension of Oster's method. To assist in the practical application of our results we plot the region of parameter space that yield concave/convex or linear density profiles for both forced-drain and free-drain approaches. The free-drain approach allows the experimentalist to produce a broad range of density profiles by varying the initial liquid depths, cross-sectional and drain opening areas of the tanks. One advantage over the original Oster approach is that density profiles with an inflexion point can now be established. © 2008 Springer-Verlag.

A Novel System for Reducing Turbo-Lag by Injection of Compressed Gas into the Exhaust Manifold

A key challenge in achieving good transient performance of highly boosted engines is the difficulty of accelerating the turbocharger from low air flow conditions (“turbo lag”). Multi-stage turbocharging, electric turbocharger assistance, electric compressors and hybrid powertrains are helpful in the mitigation of this deficit, but these technologies add significant cost and integration effort. Air-assist systems have the potential to be more cost-effective. Injecting compressed air into the intake manifold has received considerable attention, but the performance improvement offered by this concept is severely constrained by the compressor surge limit. The literature describes many schemes for generating the compressed gas, often involving significant mechanical complexity and/or cost. In this paper we demonstrate a novel exhaust assist system in which a reservoir is charged during braking. Experiments have been conducted using a 2.0 litre light-duty Diesel engine equipped with exhaust gas recirculation (EGR) and variable geometry turbine (VGT) coupled to an AC transient dynamometer, which was controlled to mimic engine load during in-gear braking and acceleration. The experimental results confirm that the proposed system reduces the time to torque during the 3rd gear tip-in by around 60%. Such a significant improvement was possible due to the increased acceleration of turbocharger immediately after the tip-in. Injecting the compressed gas into the exhaust manifold circumvents the problem of compressor surge and is the key enabler of the superior performance of the proposed concept.

A performance evaluation of volumetric 3D interest point detectors

This paper presents the first performance evaluation of interest points on scalar volumetric data. Such data encodes 3D shape, a fundamental property of objects. The use of another such property, texture (i.e. 2D surface colouration), or appearance, for object detection, recognition and registration has been well studied; 3D shape less so. However, the increasing prevalence of 3D shape acquisition techniques and the diminishing returns to be had from appearance alone have seen a surge in 3D shape-based methods. In this work, we investigate the performance of several state of the art interest points detectors in volumetric data, in terms of repeatability, number and nature of interest points. Such methods form the first step in many shape-based applications. Our detailed comparison, with both quantitative and qualitative measures on synthetic and real 3D data, both point-based and volumetric, aids readers in selecting a method suitable for their application. © 2012 Springer Science+Business Media, LLC.