982 resultados para Strong comparison principle
Resumo:
A descriptive study was developed to compare air and surfaces fungal contamination in ten hospitals’ food units and two food units from companies. Fifty air samples of 250 litres through impaction method were collected from hospitals’ food units and 41 swab samples from surfaces were also collected, using a 10 by 10 cm square stencil. Regarding the two companies, ten air samples and eight surface samples were collected. Air and surface samples were collected in food storage facilities, kitchen, food plating and canteen. Outdoor air was also collected since this is the place regarded as a reference. Simultaneously, temperature, relative humidity and meal numbers were registered. Concerning air from hospitals’ food units, 32 fungal species were identified, being the two most commonly isolated genera Penicillium sp.
Resumo:
A adequada previsão do comportamento diferido do betão, designadamente da retracção, é essencial no projecto de uma obra de grandes dimensões, permitindo conceber, dimensionar e adoptar as disposições construtivas para um comportamento estrutural que satisfaça os requisitos de segurança, utilização e durabilidade. O actual momento é marcado por uma transição em termos da regulamentação de estruturas, com a eminente substituição da regulamentação nacional por regulamentação europeia. No caso das estruturas de betão, o Regulamento de Estruturas de Betão Armado e Pré-Esforçado (REBAP), em vigor desde 1983, será substituído pelo Eurocódigo 2. Paralelamente, a Federation International du Betón publicou o Model Code 2010 (MC2010), um documento que certamente terá forte influência na evolução da regulamentação das estruturas de betão. Neste contexto, o presente trabalho tem como objectivo estabelecer uma comparação entre os diferentes modelos de previsão da retracção incluídos nos documentos normativos referidos, identificando as principais diferenças e semelhanças entre eles e quantificando a influência dos diferentes factores considerados na sua formulação, de forma a avaliar o impacto que a introdução destes modelos de previsão irá ter no projecto de estruturas de betão. Com o propósito de aferir a forma como estes modelos reflectem a realidade do fenómeno em estudo, procedeu-se à aplicação destes modelos de previsão ao betão de duas obras cujo comportamento estrutural é observado pelo LNEC, concretamente a ponte Miguel Torga, sobre o rio Douro, na Régua, e a ponte sobre o rio Angueira, no distrito de Bragança. Em ambas as obras tinha sido efectuada a caracterização in situ da retracção, tendo-se comparado os valores experimentais assim obtidos com os valores provenientes da aplicação dos modelos de previsão considerados neste trabalho. Finalmente são apresentadas algumas conclusões obtidas com o trabalho desenvolvido nesta dissertação, bem como algumas sugestões para desenvolvimentos futuros.
Resumo:
A descriptive study was developed in order to compare indoor and outdoor air contamination caused by fungi and particles in seven poultry units. Twenty eight air samples of 25 litters were collected through the impaction method on malt extract agar. Air sampling and particles concentration measurement were done in the interior and also outside premises of the poultries’ pavilions. Regarding the fungal load in the air, indoor concentration of mold was higher than outside air in six poultry units. Twenty eight species / genera of fungi were identified indoor, being Scopulariopsis brevicaulis (40.5%) the most commonly isolated species and Rhizopus sp. (30.0%) the most commonly isolated genus. Concerning outdoor, eighteen species/genera of fungi were isolated, being Scopulariopsis brevicaulis (62.6%) also the most isolated. All the poultry farms analyzed presented indoor fungi different from the ones identified outdoors. Regarding particles’ contamination, PM2.5, PM5.0 and PM10 had a statistically significant difference (Mann-Whitney U test) between the inside and outside of the pavilions, with the inside more contaminated (p=.006; p=.005; p=.005, respectively). The analyzed poultry units are potential reservoirs of substantial amounts of fungi and particles and could therefore free them in the atmospheric air. The developed study showed that indoor air was more contaminated than outdoors, and this can result in emission of potentially pathogenic fungi and particles via aerosols from poultry units to the environment, which may post a considerable risk to public health and contribute to environmental pollution.
Resumo:
This article describes work performed on the assessment of the levels of airborne ultrafine particles emitted in two welding processes metal-active gas (MAG) of carbon steel and friction-stir welding (FSW) of aluminium in terms of deposited area in alveolar tract of the lung using a nanoparticle surface area monitor analyser. The obtained results showed the dependence from process parameters on emitted ultrafine particles and clearly demonstrated the presence of ultrafine particles, when compared with background levels. The obtained results showed that the process that results on the lower levels of alveolar-deposited surface area is FSW, unlike MAG. Nevertheless, all the tested processes resulted in important doses of ultrafine particles that are to be deposited in the human lung of exposed workers.
Resumo:
The purpose of this study is a cross-qualitative and quantitative gait analysis in 3 traumatic unilateral amputees using prosthesis with pin suspension compared to the use of prosthesis with a high vacuum suspension, the Harmony® system. In Portugal, there aren’t many studies made in the field of orthotic and prosthetic and knowledge about the number of amputees in the country. The only know is that the major cause of lower limb amputation is diabetes mellitus, being the most affected population the older age groups. The combination of technological developments with daily needs of the amputees is becoming more and more important for they better quality of life. This work was done during the curricular unit “Investigation in Prosthetics and Orthotics” class, in the 4th year of Health Technology School of Lisbon, in Portugal. This study analyzes if the change of suspension in transtibial prosthesis will influence some physiological response in amputees.
Resumo:
The present research paper presents five different clustering methods to identify typical load profiles of medium voltage (MV) electricity consumers. These methods are intended to be used in a smart grid environment to extract useful knowledge about customer’s behaviour. The obtained knowledge can be used to support a decision tool, not only for utilities but also for consumers. Load profiles can be used by the utilities to identify the aspects that cause system load peaks and enable the development of specific contracts with their customers. The framework presented throughout the paper consists in several steps, namely the pre-processing data phase, clustering algorithms application and the evaluation of the quality of the partition, which is supported by cluster validity indices. The process ends with the analysis of the discovered knowledge. To validate the proposed framework, a case study with a real database of 208 MV consumers is used.
Resumo:
To determine the precision and agreement of the hemoglobin (Hb) measurements in capillary and venous blood samples by the HemoCue® and an automated counter. Hb was determined by both equipaments in blood samples of 29 pregnant women. The HemoCue® showed low repeatability of Hb measurements in duplicate in capillary (CR=0.53 g/dL, CV=13.6%) and venous blood (CR=0.53 g/dL, CV=13.6%). Hb measurements in capillary blood were higher than those in venous blood (12.4 and 11.7 g/dL, respectively; p<0.05). There was high agreement between Hb in capillary blood by the HemoCue® and in venous blood by the counter (r icc=0.86; p<0.01), and also between the diagnosis of anemia by both equipments (k=0.81; p<0.01). The HemoCue® seems to be more appropriate for capillary blood and require training of the measurers.
Resumo:
OBJECTIVE: To obtain population estimates and profile risk factors for infant mortality in two birth cohorts and compare them among cities of different regions in Brazil. METHODS: In Ribeirão Preto, southeast Brazil, infant mortality was determined in a third of hospital live births (2,846 singleton deliveries) in 1994. In São Luís, northeast Brazil, data were obtained using systematic sampling of births stratified by maternity unit (2,443 singleton deliveries) in 1997-1998. Mothers answered standardized questionnaires shortly after delivery and information on infant deaths was retrieved from hospitals, registries and the States Health Secretarys' Office. The relative risk (RR) was estimated by Poisson regression. RESULTS: In São Luís, the infant mortality rate was 26.6/1,000 live births, the neonatal mortality rate was 18.4/1,000 and the post-neonatal mortality rate was 8.2/1,000, all higher than those observed in Ribeirão Preto (16.9, 10.9 and 6.0 per 1,000, respectively). Adjusted analysis revealed that previous stillbirths (RR=3.67 vs 4.13) and maternal age <18 years (RR=2.62 vs 2.59) were risk factors for infant mortality in the two cities. Inadequate prenatal care (RR=2.00) and male sex (RR=1.79) were risk factors in São Luís only, and a dwelling with 5 or more residents was a protective factor (RR=0.53). In Ribeirão Preto, maternal smoking was associated with infant mortality (RR=2.64). CONCLUSIONS: In addition to socioeconomic inequalities, differences in access to and quality of medical care between cities had an impact on infant mortality rates.
Resumo:
This paper proposes two meta-heuristics (Genetic Algorithm and Evolutionary Particle Swarm Optimization) for solving a 15 bid-based case of Ancillary Services Dispatch in an Electricity Market. A Linear Programming approach is also included for comparison purposes. A test case based on the dispatch of Regulation Down, Regulation Up, Spinning Reserve and Non-Spinning Reserve services is used to demonstrate that the use of meta-heuristics is suitable for solving this kind of optimization problem. Faster execution times and lower computational resources requirements are the most relevant advantages of the used meta-heuristics when compared with the Linear Programming approach.
Resumo:
Electricity market players operating in a liberalized environment requires access to an adequate decision support tool, allowing them to consider all the business opportunities and take strategic decisions. Ancillary services represent a good negotiation opportunity that must be considered by market players. For this, decision support tool must include ancillary market simulation. This paper proposes two different methods (Linear Programming and Genetic Algorithm approaches) for ancillary services dispatch. The methodologies are implemented in MASCEM, a multi-agent based electricity market simulator. A test case based on California Independent System Operator (CAISO) data concerning the dispatch of Regulation Down, Regulation Up, Spinning Reserve and Non-Spinning Reserve services is included in this paper.
Resumo:
Objectives : The purpose of this article is to find out differences between surveys using paper and online questionnaires. The author has deep knowledge in the case of questions concerning opinions in the development of survey based research, e.g. the limits of postal and online questionnaires. Methods : In the physician studies carried out in 1995 (doctors graduated in 1982-1991), 2000 (doctors graduated in 1982-1996), 2005 (doctors graduated in 1982-2001), 2011 (doctors graduated in 1977-2006) and 457 family doctors in 2000, were used paper and online questionnaires. The response rates were 64%, 68%, 64%, 49% and 73%, respectively. Results : The results of the physician studies showed that there were differences between methods. These differences were connected with using paper-based questionnaire and online questionnaire and response rate. The online-based survey gave a lower response rate than the postal survey. The major advantages of online survey were short response time; very low financial resource needs and data were directly loaded in the data analysis software, thus saved time and resources associated with the data entry process. Conclusions : The current article helps researchers with planning the study design and choosing of the right data collection method.
Resumo:
Tomographic image can be degraded, partially by patient based attenuation. The aim of this paper is to quantitatively verify the effects of attenuation correction methods Chang and CT in 111In studies through the analysis of profiles from abdominal SPECT, correspondent to a uniform radionuclide uptake organ, the left kidney.
Resumo:
Dissertação de Mestrado, Matemática para Professores, 25 de Outubro 2013, Universidade dos Açores.
Resumo:
The kraft pulps produced from heartwood and sapwood of Eucalyptus globulus at 130 degrees C, 150 degrees C, and 170 degrees C were characterized by wet chemistry (total lignin as sum of Klason and soluble lignin fractions) and pyrolysis (total lignin denoted as py-lignin). The total lignin content obtained with both methods was similar. In the course of delignification, the py-lignin values were higher (by 2 to 5%) compared to Klason values, which is in line with the importance of soluble lignin for total lignin determination. Pyrolysis analysis presents advantages over wet chemical procedures, and it can be applied to wood and pulps to determine lignin contents at different stages of the delignification process. The py-lignin values were used for kinetic modelling of delignification, with very high predictive value and results similar to those of modelling using wet chemical determinations.
Resumo:
The family involvement in firms is observable is most economies around the world, although there are significant differences among these countries, not only regarding its predominance in these economies, but also in what refers to the levels of involvement of the family in business. This research aims at understanding the family-based firms’ management when compared to non family based, with particular regards to the forms of corporate governance. This analysis is based on case studies and on secondary data found in the literature to support the findings from the empirical research. The data was collected via face to face in-depth interviews with entrepreneurs from the furniture and the events organisation industries (where the family is predominantly present in the furniture but not on the events organisation industry) and with industry and regional business associations. The case studies used in this research allowed the comparison between the Portuguese firms when the family plays an important role in business and those in which the family is absent. It has been found that there are important differences in businesses in countries/industries/local productive systems in which the family is seen as a dominant institution in the society (where businesses are based on strong ties; there is a harmonious relationship between the family members; and the family is accepted locally and dominates the firm organization) and on situations in which the family plays a more marginal role in the society. In fact, the family brings special characteristics to the business, in terms of management, corporate governance, inter and intra firm relationships and succession. Our findings confirm other empirical studies’ results found in the literature. Thus, this article provides a discussion on the factors that play a role in the form of corporate governance structure in family firms highlighting the pros and cons of organising the firm around the family.