A Rotating black ring solution in five dimensions

The vacuum Einstein equations in five dimensions are shown to admit a solution describing a stationary asymptotically flat spacetime regular on and outside an event horizon of topology S1S2. It describes a rotating black ring. This is the first example of a stationary asymptotically flat vacuum solution with an event horizon of nonspherical topology. The existence of this solution implies that the uniqueness theorems valid in four dimensions do not have simple five-dimensional generalizations. It is suggested that increasing the spin of a spherical black hole beyond a critical value results in a transition to a black ring, which can have an arbitrarily large angular momentum for a given mass.

Roadway Design Standards for Rural and Suburban Subdivisions Final Report, June 2007

In Iowa, there are currently no uniform design standards for rural and suburban subdivision development roadways. Without uniform design standards, many counties are unable to provide adequate guidance for public facilities, particularly roadways, to be constructed as part of a rural subdivision development. If a developer is not required to install appropriate public improvements or does not do so properly, significant liability and maintenance expenses can be expected, along with the potential for major project costs to correct the situation. Not having uniform design standards for rural and suburban subdivision development improvements in Iowa creates situations where there is potential for inconsistency and confusion. Differences in the way development standards are applied also create incentives or disincentives for developers to initiate subdivision platting in a particular county. With the wide range of standards or lack of standards for local roads in development areas, it is critical that some level of uniformity is created to address equity in development across jurisdictional lines. The standards must be effective in addressing the problem, but they must not be so excessive as to curtail development activities within a local jurisdiction. In order to address the concerns, cities and counties have to work together to identify where growth is going to be focused. Within that long-term growth area, the roadways should be constructed to urban standards to provide an easier transition to traditional urban facilities as the area is developed. Developments outside of the designated growth area should utilize a rural cross section since it is less likely to have concentrated urban development. The developers should be required to develop roadways that are designed for a minimum life of 40 years, and the county should accept dedication of the roadway and be responsible for its maintenance.

Velocity fluctuations of fracturelike disruptions of associating polymer solutions

Velocity has been measured as a function of time for propagating crack tips as water is injected into solutions of end-capped associating polymers in a rectanguar Hele-Shaw cell. Measurements were performed for flows with different values of cell gap, channel width, polymer molecular weight, and polymer concentration. The condition for the onset of fracturelike behavior is well described by a Deborah number which uses the shear-thinning shear rate of the polymer solution as a characteristic frequency for network relaxation. At low molecular weight, the onset of fracturelike pattern evolution is accompanied by an abrupt jump in tip velocity, followed by a lower and approximately constant acceleration. At high molecular weight, the transition to fracturelike behavior involves passing through a regime that may be understood in terms of stick-slip dynamics. The crack-tip wanders from side to side and fluctuates (in both speed and velocity along the channel) with a characteristic frequency which depends linearly on the invading fluid injection rate.

Long-range ferromagnetic dipolar ordering of high-spin molecular clusters

We report the first example of a transition to long-range magnetic order in a purely dipolarly interacting molecular magnet. For the magnetic cluster compound Mn6O4Br4(Et2dbm)6, the anisotropy experienced by the total spin S=12 of each cluster is so small that spin-lattice relaxation remains fast down to the lowest temperatures, thus enabling dipolar order to occur within experimental times at Tc=0.16 K. In high magnetic fields, the relaxation rate becomes drastically reduced and the interplay between nuclear- and electron-spin lattice relaxation is revealed.

A Mixed-method Social Networks Study Design for Research on Transnational Families

This paper advocates the adoption of a mixed-methods research design to describe and analyze ego-centered social networks in transnational family research. Drawing on the experience of the Social Networks Influences on Family Formation project (2004-2005), I show how the combined use of network generators and semistructured interviews (N = 116) produces unique data on family configurations and their impact on life course choices. A mixed-methods network approach presents specific advantages for research on children in transnational families. On the one hand, quantitative analyses are crucial for reconstructing and measuring the potential and actual relational support available to children in a context where kin interactions may be hindered by temporary and prolonged periods of separation. On the other hand, qualitative analyses can address strategies and practices employed by families to maintain relationships across international borders and geographic distance, as well as the implications of those strategies for children's well-being.

Iowa Power Fund Board Project Report Update, November 12, 2008

ISU’s proposed research will (1) develop methods for designing clean and efficient burners for low‐Btu producer gas and medium‐Btu syngas, (2) develop catalysts and flow reactors to produce ethanol from medium‐Btu synthesis gas, and (3) upgrade the BECON gasifier system to enable medium‐Btu syngas production and greatly enhanced capabilities for detailed gas analysis needed by both (1) and (2). This project addresses core development needs to enable grain ethanol industry reduce its natural gas demand and ultimately transition to cellulosic ethanol production.

Tendencias demográficas recientes en Cataluña y su repercusión territorial

En los años transcurridos desde 1975, la población de Cataluña ha experimentado cambios drásticos en las tendencias demográficas, a saber: el hundimiento de 10s niveles de nupcialidad y natalidad y la inversión de la relación migratoria con el resto de España. Dichas transformaciones no se han producido de forma homopénea, dándose una notable variedad de shtuaciones a nivel comarcal y local. El presente trabajo se propone, en primer lugar, analizar la evolución de 10s hechos demográficos en Cataluña de 1975 a 1982, intentando poner de manifiesto 10s mecanismos que han provocado el desplome del que fue esplendoroso crecimiento poblacional; en segundo lugar, estudiar la incidencia de dicha evolución en la distribución territorial de la población; y, finalmente, reflexionar sobre las perspectivas de evolución que ofrece la situación actual.

The family alliance assessment scales : steps toward validity and reliability of an observational assessment tool for early family interactions

We present the first steps in the validation of an observational tool for father-mother-infant interactions: the FAAS (Family Alliance Assessment Scales). Family-level variables are acknowledged as unique contributors to the understanding of the socio-affective development of the child, yet producing reliable assessments of family-level interactions poses a methodological challenge. There is, therefore, a clear need for a validated and clinically relevant tool. This validation study has been carried out on three samples: one non-referred sample, of families taking part in a study on the transition to parenthood (normative sample; n = 30), one referred for medically assisted procreation (infertility sample; n = 30) and one referred for a psychiatric condition in one parent (clinical sample; n = 15). Results show that the FAAS scales have (1) good inter-rater reliability and (2) good validity, as assessed through known-group validity by comparing the three samples and through concurrent validity by checking family interactions against parents' self-reported marital satisfaction.

Three essays on major trends in a slow clockspeed industry : the case of industrial automation

The motivation for this research initiated from the abrupt rise and fall of minicomputers which were initially used both for industrial automation and business applications due to their significantly lower cost than their predecessors, the mainframes. Later industrial automation developed its own vertically integrated hardware and software to address the application needs of uninterrupted operations, real-time control and resilience to harsh environmental conditions. This has led to the creation of an independent industry, namely industrial automation used in PLC, DCS, SCADA and robot control systems. This industry employs today over 200'000 people in a profitable slow clockspeed context in contrast to the two mainstream computing industries of information technology (IT) focused on business applications and telecommunications focused on communications networks and hand-held devices. Already in 1990s it was foreseen that IT and communication would merge into one Information and communication industry (ICT). The fundamental question of the thesis is: Could industrial automation leverage a common technology platform with the newly formed ICT industry? Computer systems dominated by complex instruction set computers (CISC) were challenged during 1990s with higher performance reduced instruction set computers (RISC). RISC started to evolve parallel to the constant advancement of Moore's law. These developments created the high performance and low energy consumption System-on-Chip architecture (SoC). Unlike to the CISC processors RISC processor architecture is a separate industry from the RISC chip manufacturing industry. It also has several hardware independent software platforms consisting of integrated operating system, development environment, user interface and application market which enables customers to have more choices due to hardware independent real time capable software applications. An architecture disruption merged and the smartphone and tablet market were formed with new rules and new key players in the ICT industry. Today there are more RISC computer systems running Linux (or other Unix variants) than any other computer system. The astonishing rise of SoC based technologies and related software platforms in smartphones created in unit terms the largest installed base ever seen in the history of computers and is now being further extended by tablets. An underlying additional element of this transition is the increasing role of open source technologies both in software and hardware. This has driven the microprocessor based personal computer industry with few dominating closed operating system platforms into a steep decline. A significant factor in this process has been the separation of processor architecture and processor chip production and operating systems and application development platforms merger into integrated software platforms with proprietary application markets. Furthermore the pay-by-click marketing has changed the way applications development is compensated: Three essays on major trends in a slow clockspeed industry: The case of industrial automation 2014 freeware, ad based or licensed - all at a lower price and used by a wider customer base than ever before. Moreover, the concept of software maintenance contract is very remote in the app world. However, as a slow clockspeed industry, industrial automation has remained intact during the disruptions based on SoC and related software platforms in the ICT industries. Industrial automation incumbents continue to supply systems based on vertically integrated systems consisting of proprietary software and proprietary mainly microprocessor based hardware. They enjoy admirable profitability levels on a very narrow customer base due to strong technology-enabled customer lock-in and customers' high risk leverage as their production is dependent on fault-free operation of the industrial automation systems. When will this balance of power be disrupted? The thesis suggests how industrial automation could join the mainstream ICT industry and create an information, communication and automation (ICAT) industry. Lately the Internet of Things (loT) and weightless networks, a new standard leveraging frequency channels earlier occupied by TV broadcasting, have gradually started to change the rigid world of Machine to Machine (M2M) interaction. It is foreseeable that enough momentum will be created that the industrial automation market will in due course face an architecture disruption empowered by these new trends. This thesis examines the current state of industrial automation subject to the competition between the incumbents firstly through a research on cost competitiveness efforts in captive outsourcing of engineering, research and development and secondly researching process re- engineering in the case of complex system global software support. Thirdly we investigate the industry actors', namely customers, incumbents and newcomers, views on the future direction of industrial automation and conclude with our assessments of the possible routes industrial automation could advance taking into account the looming rise of the Internet of Things (loT) and weightless networks. Industrial automation is an industry dominated by a handful of global players each of them focusing on maintaining their own proprietary solutions. The rise of de facto standards like IBM PC, Unix and Linux and SoC leveraged by IBM, Compaq, Dell, HP, ARM, Apple, Google, Samsung and others have created new markets of personal computers, smartphone and tablets and will eventually also impact industrial automation through game changing commoditization and related control point and business model changes. This trend will inevitably continue, but the transition to a commoditized industrial automation will not happen in the near future.

Omaisten näkemyksiä vanhusten pitkäaikaiseen laitoshoitoon siirtymisestä ja sen myöhentämisestä

Summary: The transition to and postponing of institutional long-term care of the elderly according to the views of the relatives

Grau de satisfacció d'un col·lectiu de persones grans en relació a l'atenció rebuda dels professionals d'infermeria durant la seva hospitalització

Introducció: La preocupació per la qualitat assistencial, i concretament per la qualitat de les cures infermeres, la satisfacció percebuda pel pacient com element fonamental com a indicador de la qualitat dels serveis sanitaris i clau en la millora de la qualitat assistencial, i el fet que a l’estat espanyol hi ha pocs estudis de satisfacció específics de la població anciana hospitalitzada, ens va portar a plantejar un estudi amb l’objectiu de valorar el grau de satisfacció de les persones grans hospitalitzades en relació a l’atenció rebuda dels professionals d’infermeria. Metodologia: S’ha realitzat un estudi descriptiu i transversal en un col.lectiu de 42 persones hospitalitzades d’edat ≥ 60 anys. El grau de satisfacció es va determinar amb “La Monica Oberst Patient Satisfaction Scale 12” (LOPSS 12), versió reduïda en castellà. La personalització de les cures es va valorar amb un qüestionari que valora la relació infermera-usuari extret de l’Índex de Personalització de les Cures. L'anàlisi estadística es va dur a terme amb el programa informàtic SPSS® vs 21.0. Resultats: Es va evidenciar un elevat grau de satisfacció global amb les cures d’infermeria (8,8  1,5 / 10), però el nivell global de personalització d’aquestes cures no va ser molt satisfactori (3,4  2,1 / 7). Els homes van valorar millor a les infermeres respecte a que consideraven les seves opinions i preferències (p=0,03) i contestaven amb rapidesa les seves trucades (p=0,009). La personalització de les cures millorava conforme incrementava el grau de satisfacció global (r = 0,582; p = 0,000) i amb el temps d’hospitalització (r = 0,344; p = 0,026). Conclusions: El grau de satisfacció global respecte la satisfacció en l’atenció rebuda per part d’infermeria, va ser elevat però amb baix grau de personalització, mostrant major satisfacció els homes respecte les dones. Conèixer l’opinió dels usuaris representa una oportunitat pels professionals de reflexionar sobre la pràctica clínica i ser crítics per avançar en el desenvolupament de la professió, identificant aspectes susceptibles de millora 5 amb la finalitat d’augmentar la qualitat de les cures que es presten, així com la qualitat de vida de les persones.

Las Humanidades Digitales: principios, valores y prácticas

El objetivo de este artículo es introducir al lector español en algunos debates recientes de la comunidad de humanistas digitales de habla inglesa. En lugar de intentar definir la disciplina en términos absolutos, se ha optado por una aproximación diacrónica aunque se ha puesto el acento en algunos principios como la interdisciplinariedad y la construcción de modelos, valores como el acceso y el código abierto, y prácticas como la minería de datos y la colaboración.

Implementing the Mechanistic-Empirical Pavement Design Guide: Implementation Plan, TR-509, 2005

The current 1993 American Association of State Highway and Transportation Officials (AASHTO) Pavement Design Guide is based on the empirical interpretation of the results of the 1960 AASHTO Road Test. With the release of the new Mechanistic-Empirical (M-E) Pavement Design Guide, pavement design has taken a "quantum" leap forward. In order to effectively and efficiently transition to the M-E Pavement Design Guide, state DOTs need a detailed implementation and training strategy. This document is a plan for the M-E Pavement Design Guide to be implemented in Iowa.

Insights into the Design and Characteristics of the Sedimentation Process at Multi-Barrel Culverts in Iowa, TR-596, 2010

The present study is an integral part of a broader study focused on the design and implementation of self-cleaning culverts, i.e., configurations that prevent the formation of sediment deposits after culvert construction or cleaning. Sediment deposition at culverts is influenced by many factors, including the size and characteristics of material of which the channel is composed, the hydraulic characteristics generated under different hydrology events, the culvert geometry design, channel transition design, and the vegetation around the channel. The multitude of combinations produced by this set of variables makes the investigation of practical situations a complex undertaking. In addition to the considerations above, the field and analytical observations have revealed flow complexities affecting the flow and sediment transport through culverts that further increase the dimensions of the investigation. The flow complexities investigated in this study entail: flow non-uniformity in the areas of transition to and from the culvert, flow unsteadiness due to the flood wave propagation through the channel, and the asynchronous correlation between the flow and sediment hydrographs resulting from storm events. To date, the literature contains no systematic studies on sediment transport through multi-box culverts or investigations on the adverse effects of sediment deposition at culverts. Moreover, there is limited knowledge about the non-uniform, unsteady sediment transport in channels of variable geometry. Furthermore, there are few readily useable (inexpensive and practical) numerical models that can reliably simulate flow and sediment transport in such complex situations. Given the current state of knowledge, the main goal of the present study is to investigate the above flow complexities in order to provide the needed insights for a series of ongoing culvert studies. The research was phased so that field observations were conducted first to understand the culvert behavior in Iowa landscape. Modeling through complementary hydraulic model and numerical experiments was subsequently carried out to gain the practical knowledge for the development of the self-cleaning culvert designs.

Wishes or Constraints? Mothers' Labour Force Participation and its Motivation in Switzerland

The aim of this article is to estimate the impact of various factors related to role conflict theory and preference theory on the reduction of women's labour force participation after their transition to parenthood. Objective and subjective dimensions of women's labour force participation are assessed. The empirical test is based on a survey of couples with children in Switzerland. Results show that compared to structural factors associated with role conflict reduction, preferences have little impact on mothers' labour force participation, but explain a good deal of their frustration if the factual situation does not correspond to their wishes. Structural factors, such as occupation, economic resources, childcare, and an urban environment, support mothers' labour force participation, whereas active networks and a home centred lifestyle preference help them to cope with frustrations.