986 resultados para Seeds germination
Resumo:
Leaf scald of barley caused by Rhynchosporium secalis is an important disease in Argentina. The fungus is a necrotrophic pathogen which survives in stubble, seeds and weeds. Isolation of R. secalis from seeds on artificial media usually has not been successful due to the slow growth rate of the pathogen and strong inhibition by contaminants. The objective in this work was to detect R. secalis in different genotypes of barley seeds in Argentina using the polymerase chain reaction (PCR)-based diagnostic assay. Four barley genotypes were tested in 2004: Quilmes Ayelén, Quilmes Alfa, Barke and Maltería Pampa 1004. The previously described RS8 and RS9 primers were used for the detection of R. secalis in barley seeds. A 264-bp single band was obtained for each cultivar showing the presence of R. secalis. The use of specific primers was efficient in the detection of R. secalis in barley seeds in Argentina and could be used for routine diagnosis, epidemiology and seed transmission studies. This is the first report on the detection of R. secalis in barley seeds in Argentina.
Resumo:
Starch is the most important carbohydrate storage in plants. It is a raw material with diverse botanical origins, and is used by the food, paper, chemical, pharmaceutical, textile and other industries. In this work, native starches of Paraná pine seeds (pinhão) (Araucária angustiofolia, Bert O. Ktze) and european chestnut seeds (Castanea sativa, Mill) were studied by thermoanalytical techniques: thermo-gravimetry (TG), differential thermal analysis (DTA) and differential scanning calorimetry (DSC), as well as X-ray powder patterns diffractometry. Apparent and total amylose content was also determined.
Resumo:
Northern corn leaf blight, caused by Exserohilum turcicum (Et), is a disease of widespread occurrence in regions where corn, sweetcorn and popcorn are grown. This disease has great potential to cause damage and has been studied for years, but the association of its causal agent with seeds remains unconfirmed. Thus, the availability of a sensitive method to detect and quantify the inoculum in seeds, even at low incidence, is essential. The aim of this study was to develop a method to detect and quantify the presence of the fungus infecting and infesting corn and popcorn seeds. Artificially and naturally infected seeds were employed to develop the medium. The semi-selective medium was composed of carbendazim (active ingredient) (60 mg/L), captan (30 mg/L), streptomycin sulfate (500 mg/L) and neomycin sulfate (600 mg/L) aggregated to the medium lactose casein hydrolysate agar medium. By using this, Et was detected in naturally infected corn seeds, showing 0.124% incidence, in four out of ten analyzed samples. In addition, 1.04 conidia were detected per infested seed. By means of isolation, pathogenicity test, morphological characterization and comparison with descriptions of the species in the literature, the fungus isolated from the seeds was confirmed to be Et. Both infection and infestation were considered low; thus, for studies of Et detection in corn seeds, the use of semi-selective medium and more than 1,200 seeds/sample is suggested.
Resumo:
In vitro experiments were conducted to assess the effects of substrate, temperature and time of exposure to temperature and photoperiod on P. pachyrhizi uredospore germination and germ tube growth. The following substrates were tested: water-agar and soybean leaf extract-agar at different leaf concentrations (0.5, 1.0, 2.0 and 4.0 g of leaves and 15g agar/L water), temperatures (10, 15, 20, 25, 30, and 35oC) and times of exposure (1, 2, 3, 4, 5, 6, 7, and 8 hours) to temperature and 12 different photoperiods. The highest germination and germ tube length was found for the soybean leaf extract agar. Maximum P. pachyrhizi uredospore germination was obtained at 21.8 and 22.3°C, and maximum germ tube growth at 21.4 and 22.1°C. The maximum uredospore germination was found at 6.4 hours exposure, while the maximum germ tube length was obtained at 7.7 h exposure. Regarding photoperiod, the maximum spore germination and the maximum uredospore germ tube length were found in the dark. Neither spore germination nor uredospore germ tube growth was completely inhibited by the exposure to continuous light.
Reproductive ecology of the exotic tree Muntingia calabura L. (Muntingiaceae) in southeastern Brazil
Resumo:
The exotic tree Muntingia calabura L. (Muntingiaceae), a species native to Central America, is used as fish feed and fiber and cellulose production in Brazil. This study was carried out in urban areas and verified the reproductive biology of this plant species. Flower and fruit morphology, compatibility system, reproductive phenology, pollination and frugivore animals, and germination of disseminated seeds were recorded by standard field and laboratory procedures. This tree is self-compatible and autonomously self-pollinated, with its flowers being mainly visited by bees and its fruits consumed by birds and bats. Germination of its dispersed seeds is fast and occurs at a high rate. The results of this work suggest that M. calabura is very adaptable to cultivated areas,thus being an excellent choice for urban reforestation. However, its reproductive characteristics place this plant as an invasive species with significant potential in southeastern Brazil.
Resumo:
The objective of this work was to correlate data on light microscopy observations through histochemical analysis and polarized light techniques and investigations in transmission electron microscopy (TEM) to characterize the reserve materials in C. peltophoroides Benth. (Leguminosae-Caesalpinoideae) cotyledons, popularly known as "sibipiruna", a tropical tree species with wide distribution in Brazil. The cotyledon mesophyll, especially in the abaxial face, is rich in unsaturated neutral lipids contained in numerous lipid bodies dispersed in the cytoplasm. Proteins, more concentrated in the adaxial face of the cotyledons, occur in all the mesophyll and are stored in protein bodies containing globoids, with variable number and size, responsible for accumulation of mineral reserves. Calcium oxalate druses have distribution restricted to the cotyledons adaxial face and are associated with protein bodies. Starch, also distributed all over the cotyledon mesophyll, occurs in small amounts in plastids with developed lamellar system. Secretory cavities rich in phenolic compounds occur among procambial strands.
Resumo:
Some native species produce seeds with low germination percentage and in most cases with dormancy, which makes the appearance of new individuals by sexual propagation difficult. The Maclura tinctoria has been considered an endangered species due to the indiscriminate use of its wood and low rate of seed germination. In this context, the objective of the present study was to establish an in vitropropagation methodology for this species. Combinations of NAA + BAP, different concentrations of GA3 and combinations IBA + activated charcoal were evaluated for shoot induction, shoot growth and root formation, respectively. The results indicated that the maximum shoot formation was obtained when 5.37 µM NAA + 4.45 µM BAP was used. The use of 5.48 µM GA3 promoted shoot growth. Root formation was observed on explants inoculated in WPM with a pH adjusted to 7.0 and supplemented with 23.62 µM IBA + 4.7 g L-1 activated charcoal. The use of a 70% light screen for 7 days followed by the use of 50 and 30% light screens also for 7 days each provided 97% plantlet survival.
Resumo:
The objective of this work was to establish an efficient protocol for in vitro multiplication and rooting, as well as ex vitroacclimatization of Aegiphila verticillata, a woody species found in Brazilian rocky fields. Aseptic cultures were established by seeds and two multiplication analyses were performed. In the first, we employed 6-benzylaminopurine (BAP – 0, 2.5, 5 and 7.5 μM) + α-naphthalene acetic acid (NAA – 0, 0.2, 0.4 and 0.6 μM) and, in the second, were studied adenine sulfate, kinetin and thidiazuron (0, 5, 7.5, 10 and 12.5 μM). After 90 days, we assessed the quantitative and qualitative shoot propagation. There were more than 90% seed germination and low contamination (2%). In multiplication phase, the culture medium that promoted the best quantitative and qualitative culture development was supplemented with 7.5 μM BAP + 0.4 μM NAA. In the rooting assay, were used NAA, indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA) (0, 0.1, 0.2, 0.3 or 0.4 μM). After 90 days, the root number and rooting quality were evaluated. In this analysis, differences were not found between the control and the other treatments. Rooted plantlets were acclimatized in styrofoam trays for 30 days, after which they were transferred to pots in the greenhouse. Only 3% of the plants subjected to initial acclimatization died and 70% of the plants transferred to the field conditions survived and showed normal development. The results founded in this work are the first involving in vitro propagation and ex vitroacclimatization of Aegiphila verticillata and provide a continuous supply of this medicinal native species, endangered due anthropogenic activities.
Resumo:
ABSTRACT This study estimates the repeatability coefficients of two production traits in two native populations of Brazil nut trees. It determines the number of years of suitable evaluations for an efficient selection process, determines the permanent phenotypic correlation between production traits and also the selection of promising trees in these populations. Populations, located in the Itã region (ITA) and in the in the Cujubim region (CUJ), are both belonging to the municipality of Caracaraí, state of Roraima - Brazil, and consist of 85 and 51 adult trees, respectively. Each tree was evaluated regarding the number of fruits per plant (NFP) and fresh seed weight per plant (SWP), for eight (ITA) and five consecutive years (CUJ). Statistical analyses were performed according to the mixed model methodology, using Software Selegen-REML/BLUP (RESENDE, 2007). The repeatability coefficients were low for NFP (0.3145 and 0.3269 for ITA and CUJ, respectively) and also for SWP (0.2957 and 0.3436 for ITA and CUJ, respectively). It on average takes nine evaluation years to reach coefficients of determination higher than 80%. Permanent phenotypic correlation values higher than 0.95 were obtained for NFP and SWP in both populations. Although trees with a high number of fruits and seed weight were identified, more evaluation years are needed to perform the selection process more efficiently.
Resumo:
ABSTRACT This work aimed to evaluate the consequences of the monthly extraction of immature leaves in survival, leaf production and reproductive performance ofCopernicia prunifera H. E. Moore palm, popularly known as carnaúba. One hundred sixty reproductive adult palms were monitored for 17 months in four extractive communities located at the coast of the state of Piauí. As a result, it was observed that leaves, flowers, fruits and seeds production were reduced in the palm submitted to 50% or 75% monthly extraction. Higher levels of extraction were followed by smaller levels in seed germination. No deaths were observed even in the group subjected to 75% monthly leaves exploration. In order not to produce damage to palm trees development it is suggested that leaf extraction rate should not exceed 25% monthly as well as pausing of extractive activity preferentially during fruit maturation.
Resumo:
The use of gravity table can result in improved quality of seeds of several species, demonstrating the superiority of the quality attributes of seeds collected in the top positions in relation to the lower positions of the discharge zone of the gravity table. The availability of information on tobacco seeds, particularly on the action of gravity table, has not been addressed in the literature. The present study was to evaluate the influence of different regulations in the gravity table on the quality of tobacco seeds. The terminal edge of the machine of 50 cm width was divided into four parts plus the outlet for stones. The treatments were in the following fractions: original seed (obtained in the feed hopper), heavy seed (at the top), middle high, intermediate, and light seed (lower part), and the stones outlet of the gravity table. Each combination of regulation was in an independent adjustment with a total of seven adjusts. The gravity table, in the adjustments with high oscillation, was efficient in improving the physiological quality of seed lots of tobacco, by removing the fraction of light seeds discharged at the bottom of the terminal edge.
Resumo:
This study presents an evaluation of a pilot multistage filtration system (MSF) with different dosages, 131 mg L-1 and 106 mg L-1, of the natural coagulant extracted from Moringa oleifera seeds in pre-filtration and slow filtration stages, respectively. The system was comprised by a dynamic pre-filter unit, two upflow filters in parallel and four slow filters in parallel, and in one of the four filters had the filter media altered. The performance of the system was evaluated by monitoring some water quality parameters such as: turbidity, apparent color and slow filter load loss. The stages that have received the coagulant solution had better treatment efficiency compared with the steps without it. However, the direct application of the coagulant solution in the slow filter caused rapid clogging of the non-woven blanket and shorter career length.
Resumo:
This study aimed to evaluate the effect of horizontal plate meter with oblong holes operating with one or two seed outlets at different speeds over the accuracy of longitudinal distribution of common bean seeds (Phaseolus vulgaris L.). The experiment was performed in laboratory using the meter with one and two seed outlet points in relation to ten tangential disk plate speeds (0.03 to 0.30 m s-1). It was used a complete randomized design with four replications, summing up 80 experimental treatments. Tangential speed quantitative factor was estimated through a 2nd order polynomial regression. There was no significant difference in the behavior of the seed meter operating with one or two outlets in the metering of bean seeds in all tested speeds, with percentage of single seeds spacing over 60% in tangential speeds below of 0.24 m s-1.
Resumo:
Straw on sowing line modifies seed germination environment regarding temperature and water content. Given these considerations, the aim of this study was to evaluate different mechanisms for coverage mobilization on the sowing line and their effect on germination environment of maize seeds, mainly in relation to the dynamics of straw in the seedbed, water content and soil temperature. Treatments consisted on the combination of two mechanisms at front of furrow opener, composed of cutting disc and row cleaners, with three mechanisms behind the seed furrower for returning the soil, consisting of three covering mechanisms, commercial and prototype models. It was found that straw presence on the surface of sowing line contributed to germination of maize seeds, maintenance of temperature and soil water content. The cutting disc treatment, associated with prototype, introduced percentages of water content near the ones in bottom layer, and this soil water content was 29.7% with 93.75% of straw coverage and deeper seeding depth, granting better conditions for seed germination. However, the straw coverage removal on soil by the row cleaners and its low sowing depth caused water loss in the lines resulting in great reduction of the emergence speed index in maize seedlings.
Resumo:
ABSTRACTPeanut crop (Arachis hypogaeaL.) mechanization has been improved over the years; however there are drawbacks that affect the quality of operations. Thus, this article’s objectives were to evaluate the operational performance of the mechanized sowing of peanut crop according to seeding densities (10, 14, and 18 seeds m-1) and seed sizes (21 and 23 mm). It was observed that the seeds of 23 mm had shorter average number of days to emergence and a higher percentage of emergences, occurring the opposite to the seeding density of 18 seeds m-1. The higher the seeding density, the largest was the plant stand, whereas the 23 mm seed obtained the best results and the same with the seeding density of 14 seeds m-1 that had a higher percentage of normal spacing. The densities of 14 and 18 seeds m-1 reflected in higher yields, being always superior to the 23 mm seeds.