Quantum Phase Diagram of One-Dimensional Spin and Hubbard Models with Transitions to Bond Order Wave Phases

Similar quantum phase diagrams and transitions are found for three classes of one-dimensional models with equally spaced sites, singlet ground states (GS), inversion symmetry at sites and a bond order wave (BOW) phase in some sectors. The models are frustrated spin-1/2 chains with variable range exchange, half-filled Hubbard models with spin-independent interactions and modified Hubbard models with site energies for describing organic charge transfer salts. In some range of parameters, the models have a first order quantum transition at which the GS expectation value of the sublattice spin < S-A(2)> of odd or even-numbered sites is discontinuous. There is an intermediate BOW phase for other model parameters that lead to two continuous quantum transitions with continuous < S-A(2)>. Exact diagonalization of finite systems and symmetry arguments provide a unified picture of familiar 1D models that have appeared separately in widely different contexts.

An open source massively parallel solver for Richards equation: Mechanistic modelling of water fluxes at the watershed scale

In this paper we present a massively parallel open source solver for Richards equation, named the RichardsFOAM solver. This solver has been developed in the framework of the open source generalist computational fluid dynamics tool box OpenFOAM (R) and is capable to deal with large scale problems in both space and time. The source code for RichardsFOAM may be downloaded from the CPC program library website. It exhibits good parallel performances (up to similar to 90% parallel efficiency with 1024 processors both in strong and weak scaling), and the conditions required for obtaining such performances are analysed and discussed. These performances enable the mechanistic modelling of water fluxes at the scale of experimental watersheds (up to few square kilometres of surface area), and on time scales of decades to a century. Such a solver can be useful in various applications, such as environmental engineering for long term transport of pollutants in soils, water engineering for assessing the impact of land settlement on water resources, or in the study of weathering processes on the watersheds. (C) 2014 Elsevier B.V. All rights reserved.

Bearing capacity of circular foundations reinforced with geogrid sheets

The ultimate bearing capacity of a circular footing, placed over a soil mass which is reinforced with horizontal layers of circular reinforcement sheets, has been determined by using the upper bound theorem of the limit analysis in conjunction with finite elements and linear optimization. For performing the analysis, three different soil media have been separately considered, namely, (i) fully granular, (ii) cohesive frictional, and (iii) fully cohesive with an additional provision to account for an increase of cohesion with depth. The reinforcement sheets are assumed to be structurally strong to resist axial tension but without having any resistance to bending; such an approximation usually holds good for geogrid sheets. The shear failure between the reinforcement sheet and adjoining soil mass has been considered. The increase in the magnitudes of the bearing capacity factors (N-c and N-gamma) with an inclusion of the reinforcement has been computed in terms of the efficiency factors eta(c) and eta(gamma). The results have been obtained (i) for different values of phi in case of fully granular (c=0) and c-phi soils, and (ii) for different rates (m) at which the cohesion increases with depth for a purely cohesive soil (phi=0 degrees). The critical positions and corresponding optimum diameter of the reinforcement sheets, for achieving the maximum bearing capacity, have also been established. The increase in the bearing capacity with an employment of the reinforcement increases continuously with an increase in phi. The improvement in the bearing capacity becomes quite extensive for two layers of the reinforcements as compared to the single layer of the reinforcement. The results obtained from the study are found to compare well with the available theoretical and experimental data reported in literature. (C) 2014 The Japanese Geotechnical Society. Production and hosting by Elsevier B.V. All rights reserved.

Bearing capacity of a circular foundation on layered sand-clay media

The bearing capacity of a circular footing lying over fully cohesive strata, with an overlaying sand layer, is computed using the axisymmetric lower bound limit analysis with finite elements and linear optimization. The effects of the thickness and the internal friction angle of the sand are examined for different combinations of c(u)/(gamma b) and q, where c(u)=the undrained shear strength of the cohesive strata, gamma=the unit weight of either layer, b=the footing radius, and q=the surcharge pressure. The results are given in the form of a ratio (eta) of the bearing capacity with an overlaying sand layer to that for a footing lying directly over clayey strata. An overlaying medium dense to dense sand layer considerably improves the bearing capacity. The improvement continuously increases with decreases in c(u)/(gamma b) and increases in phi and q/(gamma b). A certain optimum thickness of the sand layer exists beyond which no further improvement occurs. This optimum thickness increases with an increase in 0 and q and with a decrease in c(u)/(gamma b). Failure patterns are also drawn to examine the inclusion of the sand layer. (C) 2015 The Japanese Geotechnical Society. Production and hosting by Elsevier B.V. All rights reserved.

Molecular Cage Impregnated Palladium Nanoparticles: Efficient, Additive-Free Heterogeneous Catalysts for Cyanation of Aryl Halides

Two shape-persistent covalent cages (CC1(r) and CC2(r)) have been devised from triphenyl amine-based trialdehydes and cyclohexane diamine building blocks utilizing the dynamic imine chemistry followed by imine bond reduction. The cage compounds have been characterized by several spectroscopic techniques which suggest that CC1(r) and CC2(r) are 2+3] and 8+12] self-assembled architectures, respectively. These state-of-the-art molecules have a porous interior and stable aromatic backbone with multiple palladium binding sites to engineer the controlled synthesis and stabilization of ultrafine palladium nanoparticles (PdNPs). As-synthesized cage-embedded PdNPs have been characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and powder X-ray diffraction (PXRD). Inductively coupled plasma optical emission spectrometry reveals that Pd@CC1(r) and Pd@CC2(r) have 40 and 25 wt% palladium loading, respectively. On the basis of TEM analysis, it has been estimated that as small as similar to 1.8 nm PdNPs could be stabilized inside the CC1(r), while larger CC2(r) could stabilize similar to 3.7 nm NPs. In contrast, reduction of palladium salts in the absence of the cages form structure less agglomerates. The well-dispersed cage-embedded NPs exhibit efficient catalytic performance in the cyanation of aryl halides under heterogeneous, additive-free condition. Moreover, these materials have excellent stability and recyclability without any agglomeration of PdNPs after several cycles.

Model studies of Ziegler-Natta olefin polymerization using group 3 and group 4 metallocenes

Evidence for the stereochemical isomerization of a variety of ansa metallocene compounds is presented. For the scandocene allyl derivatives described here, we have established that the process is promoted by a variety of salts in both ether and hydrocarbon solvents and is not accelerated by light. A plausible mechanism based on an earlier proposal by Marks, et al., is offered as an explanation of this process. It involves coordination of anions and/or donor solvents to the metal center with cation assistance to encourage metalcyclopentadienyl bond heterolysis, rotation about the Si-Cp bond of the detached cyclopentadienide and recoordination of the opposite face. Our observations in some cases of thermodynamic racemic:meso ratios under the reaction conditions commonly used for the synthesis of the metallocene chlorides suggests that the interchange is faster than metallation, such that the composition of the reaction mixture is determined by thermodynamic, not kinetic, control in these cases.

Two new ansa-scandocene alkenyl compounds react with olefins resulting in the formation of η³-allyl complexes. Kinetics and labeling experiments indicate a tuck-in intermediate on the reaction pathway; in this intermediate the metal is bound to the carbon adjacent to the silyllinker in the rear of the metallocene wedge. In contrast, reaction of permethylscandocene alkenyl compounds with olefins results, almost exclusively, in vinylic C-H bond activation. It is proposed that relieving transition state steric interactions between the cyclopentadienyl rings and the olefin by either linking the rings together or using a larger lanthanide metal may allow for olefin coordination, stabilizing the transition state for allylic σ-bond metathesis.

A selectively isotopically labeled propylene, CH₂CD(¹³CH₃), was synthesized and its polymerization was carried out at low concentration in toluene solution using isospecific metallocene catalysts. Analysis of the NMR spectra (¹³C, ¹H, and ²H) of the resultant polymers revealed that the production of stereoerrors through chain epimerization proceeds exclusively by the tertiaryalkyl mechanism. Additionally, enantiofacial inversion of the terminally unsaturated polymer chain occurs by a non-dissociative process. The implications of these results on the mechanism of olefin polymerization with these catalysts is discussed.

Avaliação da sorção de Cu (II) e Hg (II) pela Sargassum sp modificado com epicloridrina

É crescente o aumento da preocupação do homem com a contaminação de ambientes aquáticos uma vez que da subsistência dos mesmos depende o bem estar de todos. Ao mesmo tempo em que cresce a preocupação tem aumentado a quantidade de pesquisas em busca de tecnologias alternativas ao tratamento e remediação de efluentes aquosos contaminados pelas mais diversas substâncias incluindo os metais pesados. Nas últimas décadas, tem crescido o número de trabalhos avaliando a capacidade de sorção e a viabilidade da utilização de biossorventes de baixo custo na captação de íons metálicos e um desses materiais são as biomassas de algas pardas. Dentre os vários gêneros existentes no planeta o território brasileiro é rico na macroalga do gênero Sargassum. Muito embora a composição dessas biomassas varie o principal constituinte das mesmas é o ácido algínico e seus sais alcalinos na forma de um copolímero linear, homopolimérico, com unidades do ácido manurônico, (M), (1-4)-β-D- ligado e seu epímero em C-5 nos resíduos α-L-gulurônicos, (G), respectivamente, covalentemente ligados entre si em sequencias diferenciadas ou em blocos. Os monômeros podem aparecer em blocos homopoliméricos consecutivos, resíduos G (unidades G), resíduos consecutivos M (unidades M), pequenas unidades alternadas M e G (blocos MG), ou em blocos aleatoriamente organizados. A proposta dessa dissertação é realizar a modificação do copolímero existente na biomassa com epicloridrina, avaliar e comparar a captação de íons Cu (II) e Hg (II) pela biomassa da alga Sargassum sp., com a biomassa não modificada e resultados publicados na literatura

Dendrorremediación: El uso de Betula alba para monitorizar y reducir el contenido de metales en suelos mineros.

[EN] The intense industrial activity that took place over the past century resulted in large contaminated áreas. This is an important risk to human health and environmental safety. Recent biotechnological techniques for bioremediation include phytoremediation, which uses plants to remove or stabilize contaminants in soils. In our study we choose birch (Betula alba) as the preferred species to remedy mining soils, due to it produces a large biomass and can accumulate high levels of toxic elements in its tissues. The aim of this study was (i) to determine the possibility of using this species in reforestation and/or remediation of mining soils (ii) to elucidate the potential of tocopherol levels as indicators of heavy metal pollution. Trees growing in mining soils with high concentrations of Zn, Cd and Pb were sampled and the metal content in various organs and in tree rings was analyzed. α-tocoferol levels were also analyzed as an indicator of stress. The results showed a different distribution of metals in plant tissues. Zn and Cd had a higher accumulation in leaves, whereas Pb was stored in the timber. In addition, the metal content in tree rings was higher in older rings, leading to a conclusion that older tissues present a detoxification strategy. Furthermore, we saw how the presence of α- tocoferol on branches can be an indicator of metal stress in plants and it can be also used as a monitoring factor.

Efecto del glifosato en la morfologia del tubo dogestivo y en la actividad acetilcolinesterasa de la lombriz Eisenia fetida

[EUS] Gaur egun produktu kimiko ugari erabiltzen dira nekazaritzaren produktibitatea emendatzeko eta modu honetan nekazaritza-produktuen etekin eta kalitatea hobetzeko asmoz. Hala ere, produktu kimiko hauek ekosisteman izan ditzaketen hilgarriak ez diren eraginak askotan ez dira kontuan hartzen. Azken urteotan osagai aktibo gisa glifosatoa duten herbiziden erabilera emendatu da. Lan honetan, glifosatoak ingurunean sor ditzakeen eraginak ikertu nahi izan dira, lurzoruan oso ugaria den Eisenia fetida zizarea adierazle biologiko gisa erabiliz. Esperimentuan 10 indibiduo helduz osaturiko 4 populazio erabili ziren, zeinak 14 egunez tratamendu desberdinetan ezarri ziren (kontrola, 50, 500 eta 5000 mg glifosato/Kg lur lehor). Glifosato kontzentrazio desberdinek ez zuten zizareen hilkortasunean edo pisuaren aldaketan eraginik izan. Hala ere, digestio-hodiaren epitelioaren morfologian eta azetilkolinesterasaren jardueran aldaketak behatu ziren. Glifosato kontzentrazio baxueneko ontziko zizareetan digestio-hodiko epitelioaren altueraren uniformetasun falta behatu zen, glifosato kontzentrazio ertaineko ontziko zizareetan orokorrean epitelioaren altuera txikiagoa zen, eta glifosato kontzentrazio handieneko ontziko zizareetan digestio-hodien borobiltasuna eta epitelioaren jarraitasuna galdu zen. Azetilkolinesterasaren jardueraren murrizpena behatu zen glifosatodun lurretan egondako zizareetan. Esperimentu honetan erabilitako glifosato kontzentrazioek zizareengan hilgarriak ez diren aldaketak sortzen dituzte, aztertutako biomarkatzaileak etorkizuneko ekotoxikologia testetan erabilgarriak izan daitezkeelarik.

Ecotoxicidade aguda, crônica e genotoxicidade de solo contaminado por óleo lubrificante usado e biorremediado para Eisenia andrei.

O objetivo do presente deste trabalho foi avaliar a toxicidade aguda, crônica e a genotoxicidade sobre E. andrei causadas por solo recém-contaminado com óleo lubrificante usado e após biorremediação por diferentes estratégias, após 22 meses, e paralelamente ao estudo de ecotoxicidade, foi conduzida uma investigação comparativa de três métodos de extração de HTP e HPA de solos para análise cromatográfica. A comparação das técnicas de extração evidenciou que para HTP, a técnica de extração acelerada por solvente-ASE foi a que melhor recuperou n-alcanos; já para as frações HRP e MCNR as técnicas soxhlet e micro-ondas-MARS não apresentaram diferenças significativas e foram melhores que ASE. Para HPA, a técnica de extração por soxhlet foi a que apresentou melhor recuperação em todos os solos. O teste de mortalidade apresentou, aos 14 dias, taxas crescentes de mortalidade de 10 6%, 20 0%, 73 25%, 93 12% e 100 0% para amostras de CONT (solo controle, sem contaminação artificial), BIOS (solo contaminado com 5% de OLU e biorremediado por bioestimulo), BIOA1 (solo contaminado com 5% de OLU e biorremediado por bioestimulo + bioaumento com adição de 10% de RSU maturado), e BIOA2 (solo contaminado com 5% de OLU e biorremediado por bioestimulo + bioaumento com adição de 10% de RSU semi-maturado) e OLU (solo contaminado com 5% de OLU), respectivamente. Aos 28 dias, entretanto, BIOS e OLU apresentaram taxas de mortalidade de 97 % 6 % e de 100 % 0 % respectivamente, valores estes significativamente superiores ao CONT. Foram observadas deformações anatômicas nos indivíduos mantidos em BIOS e OLU, assim como diminuição da biomassa em todas as amostras, evidenciando efeitos crônicos. O teste de reprodução, aos 28 dias, foram observadas grandes quantidades de indivíduos jovens nos solos biorremediados e recém-contaminado. No entanto, aos 56 dias houve uma diminuição dessas formas e o controle (CONT) exibiu uma quantidade maior de formas juvenis. O teste de densidade e viabilidade celular mostrou ser indicador sensível para toxicidade crônica apresentando queda nos solos BIOS e OLU em relação ao CONT com diferenças significativas (p <0.05). Não foram observados micronúcleos nos solos em estudo. Tal observação reforça a necessidade de testes de ecotoxicidade para avaliar a real eficácia de tecnologias de tratamento.

Ecotoxicidade aguda, crônica e genotoxicidade de solo contaminado por óleo lubrificante usado e biorremediado para Eisenia andrei.

O objetivo do presente deste trabalho foi avaliar a toxicidade aguda, crônica e a genotoxicidade sobre E. andrei causadas por solo recém-contaminado com óleo lubrificante usado e após biorremediação por diferentes estratégias, após 22 meses, e paralelamente ao estudo de ecotoxicidade, foi conduzida uma investigação comparativa de três métodos de extração de HTP e HPA de solos para análise cromatográfica. A comparação das técnicas de extração evidenciou que para HTP, a técnica de extração acelerada por solvente-ASE foi a que melhor recuperou n-alcanos; já para as frações HRP e MCNR as técnicas soxhlet e micro-ondas-MARS não apresentaram diferenças significativas e foram melhores que ASE. Para HPA, a técnica de extração por soxhlet foi a que apresentou melhor recuperação em todos os solos. O teste de mortalidade apresentou, aos 14 dias, taxas crescentes de mortalidade de 10 6%, 20 0%, 73 25%, 93 12% e 100 0% para amostras de CONT (solo controle, sem contaminação artificial), BIOS (solo contaminado com 5% de OLU e biorremediado por bioestimulo), BIOA1 (solo contaminado com 5% de OLU e biorremediado por bioestimulo + bioaumento com adição de 10% de RSU maturado), e BIOA2 (solo contaminado com 5% de OLU e biorremediado por bioestimulo + bioaumento com adição de 10% de RSU semi-maturado) e OLU (solo contaminado com 5% de OLU), respectivamente. Aos 28 dias, entretanto, BIOS e OLU apresentaram taxas de mortalidade de 97 % 6 % e de 100 % 0 % respectivamente, valores estes significativamente superiores ao CONT. Foram observadas deformações anatômicas nos indivíduos mantidos em BIOS e OLU, assim como diminuição da biomassa em todas as amostras, evidenciando efeitos crônicos. O teste de reprodução, aos 28 dias, foram observadas grandes quantidades de indivíduos jovens nos solos biorremediados e recém-contaminado. No entanto, aos 56 dias houve uma diminuição dessas formas e o controle (CONT) exibiu uma quantidade maior de formas juvenis. O teste de densidade e viabilidade celular mostrou ser indicador sensível para toxicidade crônica apresentando queda nos solos BIOS e OLU em relação ao CONT com diferenças significativas (p <0.05). Não foram observados micronúcleos nos solos em estudo. Tal observação reforça a necessidade de testes de ecotoxicidade para avaliar a real eficácia de tecnologias de tratamento.

Mechanical and leaching behaviour of slag-cement and lime-activated slag stabilised/solidified contaminated soil.

Stabilisation/solidification (S/S) is an effective technique for reducing the leachability of contaminants in soils. Very few studies have investigated the use of ground granulated blast furnace slag (GGBS) for S/S treatment of contaminated soils, although it has been shown to be effective in ground improvement. This study sought to investigate the potential of GGBS activated by cement and lime for S/S treatment of a mixed contaminated soil. A sandy soil spiked with 3000mg/kg each of a cocktail of heavy metals (Cd, Ni, Zn, Cu and Pb) and 10,000mg/kg of diesel was treated with binder blends of one part hydrated lime to four parts GGBS (lime-slag), and one part cement to nine parts GGBS (slag-cement). Three binder dosages, 5, 10 and 20% (m/m) were used and contaminated soil-cement samples were compacted to their optimum water contents. The effectiveness of the treatment was assessed using unconfined compressive strength (UCS), permeability and acid neutralisation capacity (ANC) tests with determination of contaminant leachability at the different acid additions. UCS values of up to 800kPa were recorded at 28days. The lowest coefficient of permeability recorded was 5×10(-9)m/s. With up to 20% binder dosage, the leachability of the contaminants was reduced to meet relevant environmental quality standards and landfill waste acceptance criteria. The pH-dependent leachability of the metals decreased over time. The results show that GGBS activated by cement and lime would be effective in reducing the leachability of contaminants in contaminated soils.

Sorptive interaction between goethite and strongly reducing organic substances from anaerobic decomposition of green manures

Strongly reducing organic substances (SROS) and iron oxides exist widely in soils and sediments and have been implicated in many soil and sediment processes. In the present work, the sorptive interaction between goethite and SROS derived from anaerobic decomposition of green manures was investigated by differential pulse voltammetry (DPV). Both green manures, Astragaltus sinicus (Astragalus) and Vicia varia (Vicia) were chosen to be anaerobically decomposed by the mixed microorganisms isolated from paddy soils for 30 d to prepare different SROS. Goethite used in experiments was synthesized in laboratory. The anaerobic incubation solutions from green manures at different incubation time were arranged to react with goethite, in which SROS concentration and Fe(II) species were analyzed. The anaerobic decomposition of Astragalus generally produced SROS more in amount but weaker in reducibility than that of Vicia in the same incubation time. The available SROS from Astragalus that could interact with goethite was 0.69 +/- 0.04, 0.84 +/- 0.04 and 1.09 +/- 0.03 cmol kg(-1) as incubated for 10, 15 and 30 d, respectively, for Vicia, it was 0.12 +/- 0.03, 0.46 +/- 0.02 and 0.70 +/- 0.02 cmol kg(-1). One of the fates of SROS as they interacted with goethite was oxidation. The amounts of oxidizable SROS from Astragalus decreased over increasing incubation time from 0.51 +/- 0.05 cmol kg(-1) at day 10 to 0.39 +/- 0.04 cmol kg(-1) at day 30, but for Vicia, it increased with the highest reaching to 0.58 +/- 0.04 cmol kg(-1) at day 30. Another fate of these substances was sorption by goethite. The SROS from Astragalus were sorbed more readily than those from Vicia, and closely depended upon the incubation time, whereas for those from Vicia, the corresponding values were remarkably less and apparently unchangeable with incubation time. The extent of goethite dissolution induced by the anaerobic solution from Vicia was greater than that from Astragalus, showing its higher reactivity. (c) 2008 Published by Elsevier Ltd.

Abatement of waste gases and water during the processes of semiconductor fabrication

The purpose of this article is to examine the methods and equipment for abating waste gases and water produced during the manufacture of semiconductor materials and devices. Three separating methods and equipment are used to control three different groups of electronic wastes. The first group includes arsine and phosphine emitted during the processes of semiconductor materials manufacture. The abatement procedure for this group of pollutants consists of adding iodates, cupric and manganese salts to a multiple shower tower (MST) structure. The second group includes pollutants containing arsenic, phosphorus, HF, HCl, NO2, and SO3 emitted during the manufacture of semiconductor materials and devices. The abatement procedure involves mixing oxidants and bases in an oval column with a separator in the middle. The third group consists of the ions of As, P and heavy metals contained in the waste water. The abatement procedure includes adding CaCO3 and ferric salts in a flocculation-sedimentation compact device equipment. Test results showed that all waste gases and water after the abatement procedures presented in this article passed the discharge standards set by the State Environmental Protection Administration of China.