Morphological characterization with image analysis of cocoa beverage powder agglomerated with steam

In this study, the morphological characteristics of cocoa beverage powder granules under minimal, average, and maximal process conditions of a steam agglomerator were studied. a stereoscopic microscope coupled to a digital camera was used for the morphological analysis. The images were analyzed to obtain shape and size descriptors. aiming to evaluate the descriptors, 150 particles were analyzed. The results showed that there was no difference between the shape descriptors - compacity, circularity, roughness, and aspect ratio - in the operating conditions evaluated. It was observed that the cocoa beverage powder granules are elongated in shape. The size descriptors, area, perimeter, perimeter of convex bounding polygon, minimal and maximal Feret diameter, were different in the process conditions for the granules of size above 600 μm. as for the minimal process conditions, especially due to low solid feed rates, there is an increase in the size descriptor values. In addition, under the minimum process conditions, in which there is low solid feed rate (400g/min) for a steam pressure of 1.0 bar, it was obtained a good granular condition with retention of 81.1% of granules on sieves with aperture size between 300 and 1190 μm.

Developing novel one-step processes for obtaining food-grade O/W emulsions from pressurized fluid extracts: processes description, state of the art and perspectives

Abstract In this work, a novel on-line process for production of food-grade emulsions containing oily extracts, i.e. oil-in-water (O/W) emulsions, in only one step is presented. This process has been called ESFE, Emulsions from Supercritical Fluid Extraction. With this process, emulsions containing supercritical fluid extracts can be obtained directly from plant materials. The aim in the conception of this process is to propose a new rapid way to obtain emulsions from supercritical fluid extracts. Nowadays the conventional emulsion formulation method is a two-step procedure, i.e. first supercritical fluid extraction for obtaining an extract; secondly emulsion formulation using another device. Other variation of the process was tested and successfully validated originating a new acronymed process: EPFE (Emulsions from Pressurized Fluid Extractions). Both processes exploit the supercritical CO2-essential oils miscibility, in addition, EPFE process exploits the emulsification properties of saponin-rich pressurized aqueous plant extracts. The feasibility of this latter process was demonstrated using Pfaffia glomerata roots as source of saponin-rich extract, water as extracting solvent and clove essential oil, directly extracted using supercritical CO2, as a model dispersed phase. In addition, examples of pressurized fluid-based coupled processes applied for adding value to food bioactive compounds developed in the past five years are reviewed.

Characterization of biomasses from the north and northeast regions of Brazil for processes in biorefineries

Abstract In search for renewable energy sources, the Brazilian residual biomasses stand out due to their favorable physical and chemical properties, low cost, and their being less pollutant. Therefore, they are likely to be used in biorefineries in the production of chemical inputs to substitute fossil fuels. This substitution is possible due to the high contents of carbohydrates (>40%), low contents of extractives (<20%), ashes (<8%) and moisture (<8%) found in these residual biomasses. High calorific values of all residues also offer them the chance to be used in combustion. A principal components analysis (PCA) was performed for better understanding of the samples and their hysic-chemical properties. Thus, this study aimed to characterize biomasses from the north (babassu residues, such as mesocarp and endocarp; pequi and Brazil nut) and northeast (agave and coconut) regions of Brazil, in order to contribute to the preservation of the environment and strengthen the economy of the region.

Höyryvoimalaitoksen lisäveden valmistus

Kandidaatintyössä tutustuttiin raakaveden sisältämiin epäpuhtauksiin ja niiden aiheuttamiin ongelmiin höyryvoimalaitoksen vesi-höyrypiirissä. Vedenkäsittelyn teoriassa perehdyttiin esikäsittely-, pehmennys-, ioninvaihto- ja käänteisosmoosimenetelmiin, joista suurinta huomiota sai ioninvaihtomenetelmä. Kandidaatintyötä tehdessä oli tekijällä mahdollisuus perehtyä myös käytännön vedenkäsittelylaitoksen toimintaperiaatteeseen. Perehdytty vedenkäsittelylaitos pitää sisällään esikäsittelylaitoksen ja ioninvaihdolla toteutetun suolanpoiston.

Effects of Fabrication Processes on the Behavior of S960 Ultra High Strength Steel (UHSS)

Strenx® 960 MC is a direct quenched type of Ultra High Strength Steel (UHSS) with low carbon content. Although this material combines high strength and good ductility, it is highly sensitive towards fabrication processes. The presence of stress concentration due to structural discontinuity or notch will highlight the role of these fabrication effects on the deformation capacity of the material. Due to this, a series of tensile tests are done on both pure base material (BM) and when it has been subjected to Heat Input (HI) and Cold Forming (CF). The surface of the material was dressed by laser beam with a certain speed to study the effect of HI while the CF is done by bending the specimen to a certain angle prior to tensile test. The generated results illustrate the impact of these processes on the deformation capacity of the material, specially, when the material has HI experience due to welding or similar processes. In order to compare the results with those of numerical simulation, LS-DYNA explicit commercial package has been utilized. The generated results show an acceptable agreement between experimental and numerical simulation outcomes.

Can future systemic financial risks be quantified?: ergodic vs nonergodic stochastic processes

Different axioms underlie efficient market theory and Keynes's liquidity preference theory. Efficient market theory assumes the ergodic axiom. Consequently, today's decision makers can calculate with actuarial precision the future value of all possible outcomes resulting from today's decisions. Since in an efficient market world decision makers "know" their intertemporal budget constraints, decision makers never default on a loan, i.e., systemic defaults, insolvencies, and bankruptcies are impossible. Keynes liquidity preference theory rejects the ergodic axiom. The future is ontologically uncertain. Accordingly systemic defaults and insolvencies can occur but can never be predicted in advance.

Improving business processes in a globally dispersed make-to-order supply chain. Case study on outbound logistics in a Multinational Corporation

The purpose of this thesis is to find out how outbound logistics process can be improved by reducing unnecessary waste in a globally dispersed make-to-order (MTO) supply chain. The research problem was addressed by a multinational corporation that aims to find a solution for reducing unnecessary waste in their outbound logistics process. The focus is on customized products that are delivered via sea transportation. Theoretical framework for improving outbound logistics processes in globally dispersed MTO supply chain was created based on business process management, Porter’s value chain theory, value stream mapping and current reality tree. The empirical research was conducted by using constructive approach due to its ability to research a practical problem and to improve the existing practices. The data was collected from ten semi-structured interviews and three non-participant observations. By analysing the data and applying the theoretical framework, five types of waste were detected in the process that were seen to derive from six root causes. Practical solution was constructed to reduce the waste in the process by combining the existing literature with the ideas raising from empirical data. The results of this thesis suggest that a MNC with a globally dispersed MTO supply chain can improve its outbound logistics process by applying activities that enhance internal and external integration, collaboration and coordination, and increase predictability of the process. This research has practical relevance both for the case company as well as for other MNCs with globally dispersed MTO supply chains that aim to improve their outbound logistics processes. This research contributes to the BPM and CRA research by providing an evidence for their applicability in the new context.

Dynamic Modelling of Circulating Fluidized Bed Plant with Gas Turbine Repowering

Increasing amount of renewable energy source based electricity production has set high load control requirements for power grid balance markets. The essential grid balance between electricity consumption and generation is currently hard to achieve economically with new-generation solutions. Therefore conventional combustion power generation will be examined in this thesis as a solution to the foregoing issue. Circulating fluidized bed (CFB) technology is known to have sufficient scale to acts as a large grid balancing unit. Although the load change rate of the CFB unit is known to be moderately high, supplementary repowering solution will be evaluated in this thesis for load change maximization. The repowering heat duty is delivered to the CFB feed water preheating section by smaller gas turbine (GT) unit. Consequently, steam extraction preheating may be decreased and large amount of the gas turbine exhaust heat may be utilized in the CFB process to reach maximum plant electrical efficiency. Earlier study of the repowering has focused on the efficiency improvements and retrofitting to maximize plant electrical output. This study however presents the CFB load change improvement possibilities achieved with supplementary GT heat. The repowering study is prefaced with literature and theory review for both of the processes to maximize accuracy of the research. Both dynamic and steady-state simulations accomplished with APROS simulation tool will be used to evaluate repowering effects to the CFB unit operation. Eventually, a conceptual level analysis is completed to compare repowered plant performance to the state-of-the-art CFB performance. Based on the performed simulations, considerably good improvements to the CFB process parameters are achieved with repowering. Consequently, the results show possibilities to higher ramp rate values achieved with repowered CFB technology. This enables better plant suitability to the grid balance markets.

In search of the interrelatedness of innovation and internationalisation processes in entrepreneurial life science companies

This study is motivated by the question how resource scarce innovative entrepreneurial companies seek and leverage global resources. This study takes a resource-seeking perspective a step forward and suggests that resources that enable the entrepreneurial internationalisation are largely accrued from the early stages of entrepreneurial life; that is from the innovation development. Consequently, this study seeks to explain how innovation and internationalisation processes are interrelated in the entrepreneurial internationalisation. This main objective is approached through three research questions, (1) What role do inter-organisational relationships in innovation have in the entrepreneurial internationalisation process? (2) What kind of inward–outward links do inter-organisational relationships create in the resource-seeking-based entrepreneurial internationalisation process? (3) What kind of capability to collaborate forms in the interaction of inter-organisational relationship deployment? The research design is a mixed methods design that consists of quantitative pilot study and qualitative multiple case study of five entrepreneurial life science companies from Finland and Austria. The findings show that innovation and internationalisation processes are tightly interwoven in pre-internationalisation state. The findings also reveal that the more experienced companies are able to take advantage of complexcross-border inter-organisational relationship structures better than the starting companies. However, very minor evidence was found on inward links translating into outward links in the entrepreneurial internationalisation process, despite the expectation to observe more of these links in the data. Combined intangible-tangible resource-seeking was the most preferred to build links between inward–outward internationalisation but also to develop competence to collaborate. By adopting a resource- instead of market-seeking approach, this study illustrated that internationalisation extends to early stages of innovative companies, and that in high-technology companies’ potentially significant cross-border relationships have started to form long before incorporation. Therefore, these observations justified the firmer inclusion of pre-company history in innovative entrepreneurship studies. The study offers a conceptualisation of entrepreneurial internationalisation that is perceived as a process. The main theoretical contributions are in the areas of international entrepreneurship and in the behavioural process studies of entrepreneurial internationalisation and resource-based internationalisation. The inclusion of the innovation-based discussion, namely the innovation process, in the internationalisation process theories has clearly contributed to the understanding of entrepreneurial internationalisation in the context of international entrepreneurship. Innovation development is a central act of entrepreneurial companies, and neglecting innovation process investigation from entrepreneurial internationalisation leaves potentially influential mechanisms unexplored.

Monitoring Directed Energy Deposition Processes in Additive Manufacturing

The purpose of this study is to find out how laser based Directed Energy Deposition processes can benefit from different types of monitoring. DED is a type of additive manufacturing process, where parts are manufactured in layers by using metallic powder or metallic wire. DED processes can be used to manufacture parts that are not possible to manufacture with conventional manufacturing processes, when adding new geometries to existing parts or when wanting to minimize the scrap material that would result from machining the part. The aim of this study is to find out why laser based DED-processes are monitored, how they are monitored and what devices are used for monitoring. This study has been done in the form of a literature review. During the manufacturing process, the DED-process is highly sensitive to different disturbances such as fluctuations in laser absorption, powder feed rate, temperature, humidity or the reflectivity of the melt pool. These fluctuations can cause fluctuations in the size of the melt pool or its temperature. The variations in the size of the melt pool have an effect on the thickness of individual layers, which have a direct impact on the final surface quality and dimensional accuracy of the parts. By collecting data from these fluctuations and adjusting the laser power in real-time, the size of the melt pool and its temperature can be kept within a specified range that leads to significant improvements in the manufacturing quality. The main areas of monitoring can be divided into the monitoring of the powder feed rate, the temperature of the melt pool, the height of the melt pool and the geometry of the melt pool. Monitoring the powder feed rate is important when depositing different material compositions. Monitoring the temperature of the melt pool can give information about the microstructure and mechanical properties of the part. Monitoring the height and the geometry of the melt pool is an important factor in achieving the desired dimensional accuracy of the part. By combining multiple different monitoring devices, the amount of fluctuations that can be controlled will be increased. In addition, by combining additive manufacturing with machining, the benefits of both processes could be utilized.

The tree we heard fall : analyzing the societal processes following focusing events

Fokuserande händelser är plötsliga, ovanliga och för med sig negativa konsekvenser för ett stort antal människor. Det handlar om det vi i vardagligt tal kallar kriser och katastrofer. En intensiv medierapportering i kombination med oroade medborgare gör att kriser och katastrofer är viktiga samhällspåfrestningar som beslutsfattare måste hantera. Syftet med avhandlingen är att öka förståelsen för hur fokuserande händelser påverkar samhälleliga processer. Avhandlingens två övergripande forskningsfrågor tar fasta på jämförelsen av olika typer av fokuserande händelser. För det första, skillnader i hur naturkatastrofer och katastrofer som tillkommit genom mänskligt handlade påverkar samhället, och för det andra, hur händelser med olika stark fokuseringskraft påverkar samhället. Medborgarreaktioner studeras i en experimentell laboratoriestudie, den mediala rapporteringen analyseras genom kvantitativ innehållsanalys av texter och bilder, och på den parlamentariska arenan analyseras riksdagsdebatten genom kvantitativ innehållsanalys. De temaområden som identifieras i den teoretiska referensramen ligger till grund för analysen och tar fasta på de känslor som händelsen ger upphov till, hur händelsen kontextualiseras (framing), skuldbeläggning samt möjliga lösningar som förs fram. Resultatet från studierna visar att skillnader mellan olika typer av händelser syns tydligast hos medborgare, uttryckt genom starkare emotionella reaktioner för händelser med stark fokusering, och på den mediala arenan, genom mer utrymme för dessa händelser. Då kriser och katastrofer med olika stark fokuseringskraft når riksdagen får de däremot ett relativt likadant mottagande. I jämförelsen mellan naturkatastrofer och människoskapade händelser visar resultaten att naturkatastrofer ofta diskuteras som specifika händelser, medan människoskapade händelser placeras i en bredare samhällelig kontext och diskuteras under längre tid. Avhandlingen bidrar till diskussionen om hur våra känslor och vår kognition samspelar i krissituationer. De omedvetna signaler som vår kropp ger oss gällande hur vi ska reagera på en farlig situation kan påverka om vi är rädda, oroliga eller till och med positivt inställda. I ljuset av de tre studierna är det tydligt att de emotionella reaktionerna minskar ju högre upp i den politiska processen vi kommer. Trots att medborgare och medier reagerar starkt är de emotionella reaktionerna på den politiska arenan relativt milda och skuldbeläggningen näst intill icke-existerande.

Integroitua päästöjen hallintamallia soveltavan öljynjalostamon normaalitoiminnan ja monitoroinnin määrittäminen

Tässä diplomityössä määritettiin Nesteen Suomen jalostamoiden normaalitoiminta ja integroidun päästöjen hallintamallin mukainen monitorointi. Työn ensimmäisenä tavoitteena oli selvittää määritelmä integroidun päästöjen hallintamallin mukaiselle normaalitoiminnalle öljynjalostamolla. Toisena tavoitteena oli löytää ratkaisut integroidun päästöjen hallintamallin monitoroinnin heikosti ohjeistettuihin kohtiin. Jalostamoiden normaalitoiminnan määrittäviä kohteita selvitettiin keskustelemalla jalostamon käyttöhenkilökunnan kanssa kriittisistä kohteista päästöjenhallinnan sekä jalostamokokonaisuuden toiminnan kannalta. Keskusteluissa esiin tulleiden kohteiden hyödyllisyyttä jalostamon normaalitoiminnan määrittämiseksi tutkittiin Nesteen jalostamoiden automaatiojärjestelmän historiatietojen perusteella. Selkeästi normaalista poikkeavaksi toiminnaksi lisääntyneiden päästöjen takia tunnistettiin polttoaineiden ja savukaasujen puhdistusprosessien häiriöt sekä Porvoon jalostamolla voimalaitoksen höyryntuotantohäiriöt. Lisäksi jalostamon normaalitoiminnan kuvaajaksi tunnistettiin toiminnassa olevien yksiköiden määrä. Monitoroinnin ohjeistuksen puutteisiin etsittiin ratkaisua olemassa olevista muiden soveltamisalojen ohjeistuksista. Integroidun päästöjen hallintamallin monitorointitarpeista tunnistettiin paljon samaa päästökaupan monitoroinnin kanssa. Monitoroinnin lisäohjeistuksena suositeltiin käyttämään päästökaupan monitorointiohjetta ja sieltä löytyviä määräyksiä. Integroidussa päästöjen hallintamallissa tunnistettiin uusia haasteita viranomaisseurannan toteuttamisessa.

Droplet Deposition in the Last Stage of Steam Turbine

During the expansion of steam in turbine, the steam crosses the saturation line and hence subsequent turbine stages run under wet condition. The stages under wet condition run with low efficiency as compared to stages running with supersaturated steam and the life of the last stage cascade is reduced due to erosion. After the steam crosses the saturation line it does not condense immediately but instead it becomes supersaturated which is a meta-stable state and reversion of equilibrium results in the formation of large number of small droplets in the range of 0.05 - 1 μm. Although these droplets are small enough to follow the stream lines of vapor however some of the fog droplets are deposited on the blade surface. After deposition they coagulate into films and rivulets which are then drawn towards the trailing edge of the blade due to viscous drag of the steam. These large droplets in the range of radius 100 μm are accelerated by steam until they impact on the next blade row causing erosion. The two phenomenon responsible for deposition are inertial impaction and turbulent-diffusion. This work shall discuss the deposition mechanism in steam turbine in detail and numerically model and validate with practical data.

A qualitative case study of the processes of peer education in a young adult tobacco control initiative, Leave the Pack Behind

Peer education involves peers offering credible and reliable information about sensitive life issues through the means of an informal peer group setting (Topping & Ehly, 1998). The purpose of this instrumental case study was to examine the processes of peer education through the exploration of two teams within a young adult tobacco control initiative, Leave the Pack Behind (LTPB). This qualitative case study examined two peer education teams over an eight-month period. Interviews, focus groups and observations were conducted with 12 participants across two peer education teams. Findings show the complexities of the processes of peer education including a connection between the stages of change and the changing role of the peer educator across stages of the empowerment process. Peer education teams and factors in the macro environment were also found to impact the process of peer education. This study provides a new definition for the process of peer education: peer education is a fluid process of knowledge exchange in which peer educators adopt different styles of facilitation as people move through stages of empowerment and change. This study contributes to the academic hterature upon the processes of peer education by providing a definition, a model and an overall understanding through an ecological and empowerment framework. The findings from this study suggest peer educators can be further trained to: use specific peer educational approaches that fit with student smoker's stage of change; better understand their position as a peer educator on the LTPB team; understand the reciprocal relationship between the macro environment and the peer education teams having an effect on one another.