Study of the rheology of self-compacting concrete with fine recycled concrete aggregates

This work studies the effect of incorporating fine recycled aggregates on the rheology of self-compacting concrete over time (at 15,45 and 90 min). The fine fraction of the natural aggregates was replaced at 0%, 20%, 50% and 100% with recycled sand. The fresh-state properties were studied by empirical tests (slump-flow, J-Ring, L-Box) and fundamental ones in an ICAR rheometer. The mixes with 50% and 100% recycled sand lost their SCC characteristics at 90 min. Contrarily the mix with 20% replacement maintained suitable passing and filling ability. The causes of this trend were an initial increase of plastic viscosity and afterwards an increase of yield stress. The compressive strength of the 50% and 100% replacement mixes decreased significantly and that of the 20% replacement mix less than 10%. (C) 2015 Elsevier Ltd. All rights reserved.

On a self-start Darrieus wind turbine: blade design and field tests

This paper is about a design of an urban area Darrieus VAWT, having self-start ability due to an innovative profile design named EN0005, avoiding the need of extra components or external electricity feed-in. An approach is presented to study the ability of a blade profile to offer self-start ability. Methodologies applied for the blade body and for profile development are reported. Field tests and main conclusions are presented to persuade for the arrangement of this design. (C) 2015 Elsevier Ltd. All rights reserved.

Self-scheduling and bidding strategies of thermal units with stochastic emission constraints

This paper is on the self-scheduling problem for a thermal power producer taking part in a pool-based electricity market as a price-taker, having bilateral contracts and emission-constrained. An approach based on stochastic mixed-integer linear programming approach is proposed for solving the self-scheduling problem. Uncertainty regarding electricity price is considered through a set of scenarios computed by simulation and scenario-reduction. Thermal units are modelled by variable costs, start-up costs and technical operating constraints, such as: forbidden operating zones, ramp up/down limits and minimum up/down time limits. A requirement on emission allowances to mitigate carbon footprint is modelled by a stochastic constraint. Supply functions for different emission allowance levels are accessed in order to establish the optimal bidding strategy. A case study is presented to illustrate the usefulness and the proficiency of the proposed approach in supporting biding strategies. (C) 2014 Elsevier Ltd. All rights reserved.

PINPIN a-Si: H based structures for X-ray image detection using the laser scanning technique

Conventional film based X-ray imaging systems are being replaced by their digital equivalents. Different approaches are being followed by considering direct or indirect conversion, with the later technique dominating. The typical, indirect conversion, X-ray panel detector uses a phosphor for X-ray conversion coupled to a large area array of amorphous silicon based optical sensors and a couple of switching thin film transistors (TFT). The pixel information can then be readout by switching the correspondent line and column transistors, routing the signal to an external amplifier. In this work we follow an alternative approach, where the electrical switching performed by the TFT is replaced by optical scanning using a low power laser beam and a sensing/switching PINPIN structure, thus resulting in a simpler device. The optically active device is a PINPIN array, sharing both front and back electrical contacts, deposited over a glass substrate. During X-ray exposure, each sensing side photodiode collects photons generated by the scintillator screen (560 nm), charging its internal capacitance. Subsequently a laser beam (445 nm) scans the switching diodes (back side) retrieving the stored charge in a sequential way, reconstructing the image. In this paper we present recent work on the optoelectronic characterization of the PINPIN structure to be incorporated in the X-ray image sensor. The results from the optoelectronic characterization of the device and the dependence on scanning beam parameters are presented and discussed. Preliminary results of line scans are also presented. (C) 2014 Elsevier B.V. All rights reserved.

Enhanced PCA-based localization using depth maps with missing data

In this paper a new method for self-localization of mobile robots, based on a PCA positioning sensor to operate in unstructured environments, is proposed and experimentally validated. The proposed PCA extension is able to perform the eigenvectors computation from a set of signals corrupted by missing data. The sensor package considered in this work contains a 2D depth sensor pointed upwards to the ceiling, providing depth images with missing data. The positioning sensor obtained is then integrated in a Linear Parameter Varying mobile robot model to obtain a self-localization system, based on linear Kalman filters, with globally stable position error estimates. A study consisting in adding synthetic random corrupted data to the captured depth images revealed that this extended PCA technique is able to reconstruct the signals, with improved accuracy. The self-localization system obtained is assessed in unstructured environments and the methodologies are validated even in the case of varying illumination conditions.

Aryleneethynylene Trimers Bearing Calix[4]arenes: synthesis, optical properties and self-assembling studies

New homoditopic bis-calix[4]arene-carbazole conjugates, armed with hydrophilic carboxylic acid functions at their lower rims, are disclosed. Evidence for their self-association in solution was gathered from solvatochromic and thermochromic studies, as well as from gel-permeation chromatography analysis. Their ability to function as highly sensitive sensors toward polar electron-deficient aromatic compounds is demonstrated.

Smart Adhesive Joints: An overview of recent developments

Adhesive bonding is a viable technique for joining a wide range of materials. However, increasing the lifetime, reducing the costs, and improving the safety of structures are highly demanded nowadays. Hence, the development of new technologies and processes for easy recycle, heal, or self-heal of bonded structures are becoming of great interest for the industry. This paper provides an overview of the current developments in the use of “smart” adhesive technology and introduces the reader to early findings on the use of self-healing materials, thermally expandable particles, and nanoparticles, among others, in adhesives and their potential to increase the reliability of adhesive joints.

A cellulosic liquid crystal pool for cellulose nanocrystals: structure and molecular dynamics at high shear rates

Cellulose and its derivatives, such as hydroxypropylcellulose (HPC) have been studied for a long time but they are still not well understood particularly in liquid crystalline solutions. These systems can be at the origin of networks with properties similar to liquid crystalline (LC) elastomers. The films produced from LC solutions can be manipulated by the action of moisture allowing for instance the development of a soft motor (Geng et al., 2013) driven by humidity. Cellulose nanocrystals (CNC), which combine cellulose properties with the specific characteristics of nanoscale materials, have been mainly studied for their potential as a reinforcing agent. Suspensions of CNC can also self-order originating a liquid-crystalline chiral nematic phases. Considering the liquid crystalline features that both LC-HPC and CNC can acquire, we prepared LC-HPC/CNC solutions with different CNC contents (1,2 and 5 wt.%). The effect of the CNC into the LC-HPC matrix was determined by coupling rheology and NMR spectroscopy - Rheo-NMR a technique tailored to analyse orientational order in sheared systems. (C) 2015 Elsevier Ltd. All rights reserved.

Double power laws, fractals and self-similarity

Power law (PL) distributions have been largely reported in the modeling of distinct real phenomena and have been associated with fractal structures and self-similar systems. In this paper, we analyze real data that follows a PL and a double PL behavior and verify the relation between the PL coefficient and the capacity dimension of known fractals. It is to be proved a method that translates PLs coefficients into capacity dimension of fractals of any real data.

Saúde mental, qualidade de vida e acesso aos cuidados de saúde na comunidade brasileira de Lisboa

Introdução: A utilização de serviços de saúde tem implicações importantes para o estado de saúde das populações. As políticas de imigração adoptadas nos países de destino têm influência no estado de saúde das comunidades imigrantes. Políticas que limitam o acesso de imigrantes aos cuidados de saúde aumentarão a vulnerabilidade e os riscos na saúde. Apesar da imigração promover uma série de rupturas na vida do sujeito, migrar, por si só, não pode ser considerado como factor de risco no âmbito da saúde e da saúde mental. O peso dos determinantes socioeconómicos tem ganho relevância no estudo das migrações, estado de saúde geral e mental. Isto porque, em geral, os imigrantes estão em situação mais precária do que a população autóctone. O estatuto socioeconómico baixo, as condições precárias de habitação e de trabalho, a falta de suporte social e a irregularidade jurídica são indicadores de risco acrescido para a saúde mental. Neste sentido é um desafio de monta os governos estabelecerem medidas sustentadas e, simultaneamente, integradoras dos imigrantes. Em Portugal, considera-se que há escassez de estudos relacionados com a área das migrações e da saúde.Metodologia: Estudo exploratório, descritivo e transversal. A finalidade foi a de identificar o estado de saúde, saúde mental e qualidade de vida da comunidade brasileira residente em Lisboa e o seu acesso aos serviços de saúde. Este estudo teve como principais objectivos a caracterização sociodemográfica, a identificação de variáveis inerentes ao processo migratório, a identificação da auto-apreciação do estado de saúde, a caracterização do acesso aos cuidados de saúde, a identificação do grupo em provável sofrimento psicológico, a comparação entre os resultados dos imigrantes juridicamente regulares e irregulares e a comparação entre a população imigrante e a população portuguesa. Inicialmente, foi prevista a utilização da técnica de amostragem de propagação geométrica ou snowball, pois a amostra tornar-se-ia maior à medida que os próprios inquiridos identificam outros potenciais respondentes. Ao longo do estudo, a metodologia inicial mostrou-se insuficiente para estabelecer uma amostra mais representativa dos imigrantes juridicamente irregulares. Para este feito, foi utilizada a metodologia de amostragem por conveniência e o local escolhido para a recolha da amostra foi o Consulado do Brasil em Lisboa. O instrumento de recolha de dados empregue baseou-se no questionário utilizado no 4º Inquérito Nacional de Saúde. O MHI-5 (Mental Health Index 5) é um instrumento de saúde mental e é parte integrante do inquérito, sendo recomendado pela Organização Mundial de Saúde. Consta de cinco itens relativos à saúde mental e os resultados são classificados através de um indicador que mede a existência de provável sofrimento psicológico. Foram incluídos no estudo 213 brasileiros. De seguida, procedeu-se ao tratamento estatístico dos dados. Resultados: A população inquirida é jovem, a maior parte tem entre 18 e 44 anos. As mulheres representam mais de metade da amostra. A taxa de actividade é elevada e a taxa de desemprego é similar à nacional. A inserção laboral prioritária é nos segmentos pouco qualificados ou de semi-qualificação. Aproximadamente um terço dos inquiridos afirmou ser beneficiário do Sistema Nacional de Saúde. A autoapreciação do estado de saúde é classificada como bastante positiva, assim como a qualidade de vida. O provável sofrimento psicológico, definido no MHI-5 pelo ponto de corte no score 52, atinge 23,3% dos participantes. Os homens apresentam melhores resultados do que as mulheres. Além disso, para os valores mais baixos no MHI-5 foram encontradas relações com as longas jornadas de trabalho e o diagnóstico de doença crónica.Discussão: O presente estudo apresenta limitações em relação à dimensão da amostra e à provável existência de enviesamento pela ausência de aleatorização. Apesar da legislação portuguesa garantir o acesso aos serviços de saúde e garantir a equidade no caso dos imigrantes que fazem descontos para a Segurança Social, apenas um terço referiu ser beneficiário do Sistema Nacional de Saúde. Este dado pode ser justificado por factores como o cumprimento da lei por alguns serviços e, também, pela falta de conhecimento da legislação e da forma de funcionamento do Serviço Nacional de Saúde por parte dos imigrantes. O facto das mulheres representarem o maior grupo em provável sofrimento psicológico é consistente com a literatura. As hipóteses levantadas para explicar este resultado podem ser agrupadas em: artefactos metodológicos, causalidade biológica e determinação social. Em relação ao instrumento, é possível que o MHI-5 se comporte de forma diferente no que diz respeito ao género.-------------------------------------------Introduction: The utilization of health services has important implications for the health state of the populations. The immigration policies adopted in the destiny countries are going to influence the health state of immigrant communities. Policies that limit the access of immigrants to health care are going to increase the vulnerability and the risk factor in health. Although immigration promotes several disruptive actions in ones life, migrating, on its own, cannot be considered as a risk factor for health and mental health. The preponderance of the socioeconomic factors has gained relevance in the study of migrations and also in the study of general health state and mental health. This happens because, in general, immigrants are in a more unfavorable situation compared with the destiny country population. The low socioeconomic status, the poor working and housing conditions, the lack of social support and the juridical irregularity are indicators of the incremented risk to mental health. Therefore, it is a major challenge for governments to find sustainable, and simultaneously, integrative measures for the immigrants. The studies related with the migrations and health in Portugal were considered to be few.Methods: It is an exploratory, descriptive and transversal study. The purpose is to identify the health state, mental health, quality of life and the access to health care of the Brazilian community resident in Lisbon. In addition, this study has as main goals the sociodemographic characterization, the variables identification inherent to the migrating process, the identification of the self-appreciation of health state, the characterization of the access to health care, the identification of the group in probable psychological suffer, the comparison between the results of regular and irregular immigrants and the comparison between the immigrant population and the Portuguese population. Initially it was predicted the utilization of the geometric propagation or “snowball”, as sampling technique, because the sample becomes larger as one answerer identify other potential answering persons. Along with the study, the methodology has shown insufficient to establish a more representative sample of the irregular immigrants. For this latter case, it was used a convenient sample methodology and the place chosen for the sample gathering was the “Consulate of Brazil in Lisbon”. The instrument was based in the questionnaire used in the “4th National Health Inquiry”. The MHI-5 (Mental Health Index 5) is a mental health instrument which is part of the enquiry and it is recommended by the World Health Organization. There are five items related to mental health and the results are classified through an indicator which measures the existence of a probable psychological suffer. It were included 213 Brazilian in the study. After, the statistical treatment of the data took place.Results: The answering population is young and the majority is between the 18 and 44 years of age. The women represent more than one half of the sample. The activity rate is high and the unemployment rate is similar to the national one. The priority labor insertion is in the few qualified or of semi-qualification segments. Approximately, one third of the answering people has stated to be beneficiary of the National Health System. The self-appreciation of the health state as well as the quality of life are classified as fairly positive ones. The probable psychological suffer, as defined in the MHI-5 through the cut point in the score below or equal to 52, reaches 23,3% of the sample population. Men show the better results than women. Further, for the lower values of MHI-5 it was found a relation with the long work periods and chronic disease diagnostic. Discussion: The present study evidences limitations in relation to the sample dimension and in relation to the existence of biases due to the lack of randomness. Although the Portuguese legislation guarantees the access to health services and the equality in the cases of the immigrants that do their Social Security discounts, only one third has mentioned to be beneficiary of the National Health System. This can be justified by several facts such as the non-fulfillment of law by some national services or the lack of knowledge of the legislation or the functioning process of the National Health System. Women representing the bigger group in probable psychological suffer has been coherent with the literature review. The hypothesis set to explain this result might be grouped in: methodological artifacts, biologic cause and social determination. In relation to the instrument used, it may be that MHI-5 behaves in a different way in respect to gender.

Temperature-induced structural transitions in self-assembling magnetic nanocolloids

With the help of a unique combination of density functional theory and computer simulations, we discover two possible scenarios, depending on concentration, for the hierarchical self-assembly of magnetic nanoparticles on cooling. We show that typically considered low temperature clusters, i.e. defect-free chains and rings, merge into more complex branched structures through only three types of defects: four-way X junctions, three-way Y junctions and two-way Z junctions. Our accurate calculations reveal the predominance of weakly magnetically responsive rings cross-linked by X defects at the lowest temperatures. We thus provide a strategy to fine-tune magnetic and thermodynamic responses of magnetic nanocolloids to be used in medical and microfluidics applications.

Durability performance of self-compacting concrete (SCC) with binary and ternary mixes of fly ash and limestone filler

The basic objective of this work is to evaluate the durability of self-compacting concrete (SCC) produced in binary and ternary mixes using fly ash (FA) and limestone filler (LF) as partial replacement of cement. The main characteristics that set SCC apart from conventional concrete (fundamentally its fresh state behaviour) essentially depend on the greater or lesser content of various constituents, namely: greater mortar volume (more ultrafine material in the form of cement and mineral additions); proper control of the maximum size of the coarse aggregate; use of admixtures such as superplasticizers. Significant amounts of mineral additions are thus incorporated to partially replace cement, in order to improve the workability of the concrete. These mineral additions necessarily affect the concrete’s microstructure and its durability. Therefore, notwithstanding the many well-documented and acknowledged advantages of SCC, a better understanding its behaviour is still required, in particular when its composition includes significant amounts of mineral additions. An ambitious working plan was devised: first, the SCC’s microstructure was studied and characterized and afterwards the main transport and degradation mechanisms of the SCC produced were studied and characterized by means of SEM image analysis, chloride migration, electrical resistivity, and carbonation tests. It was then possible to draw conclusions about the SCC’s durability. The properties studied are strongly affected by the type and content of the additions. Also, the use of ternary mixes proved to be extremely favourable, confirming the expected beneficial effect of the synergy between LF and FA. © 2015 RILEM.

Development of a high-throughput monitoring technique of bacteria photodynamic inactivation

Summary form only given. Bacterial infections and the fight against them have been one of the major concerns of mankind since the dawn of time. During the `golden years' of antibiotic discovery, during the 1940-90s, it was thought that the war against infectious diseases had been won. However currently, due to the drug resistance increase, associated with the inefficiency of discovering new antibiotic classes, infectious diseases are again a major public health concern. A potential alternative to antibiotic treatments may be the antimicrobial photodynamic inactivation (PDI) therapy. To date no indication of antimicrobial PDI resistance development has been reported. However the PDI protocol depends on the bacteria species [1], and in some cases on the bacteria strains, for instance Staphylococcus aureus [2]. Therefore the development of PDI monitoring techniques for diverse bacteria strains is critical in pursuing further understanding of such promising alternative therapy. The present works aims to evaluate Fourier-Transformed-Infra-Red (FT-IR) spectroscopy to monitor the PDI of two model bacteria, a gram-negative (Escherichia coli) and a gram-positive (S. aureus) bacteria. For that a high-throughput FTIR spectroscopic method was implemented as generally described in Scholz et al. [3], using short incubation periods and microliter quantities of the incubation mixture containing the bacteria and the PDI-drug model the known bactericidal tetracationic porphyrin 5,10,15,20-tetrakis (4-N, N, Ntrimethylammoniumphenyl)-porphyrin p-tosylate (TTAP4+). In both bacteria models it was possible to detect, by FTIR-spectroscopy, the drugs effect on the cellular composition either directly on the spectra or on score plots of principal component analysis. Furthermore the technique enabled to infer the effect of PDI on the major cellular biomolecules and metabolic status, for example the turn-over metabolism. In summary bacteria PDI was monitored in an economic, rapid (in minutes- , high-throughput (using microplates with 96 wells) and highly sensitive mode resourcing to FTIR spectroscopy, which could serve has a technological basis for the evaluation of antimicrobial PDI therapies efficiency.

Fast unsupervised technique for extraction of endmembers spectra from hyperspectral data

One of the most challenging task underlying many hyperspectral imagery applications is the linear unmixing. The key to linear unmixing is to find the set of reference substances, also called endmembers, that are representative of a given scene. This paper presents the vertex component analysis (VCA) a new method to unmix linear mixtures of hyperspectral sources. The algorithm is unsupervised and exploits a simple geometric fact: endmembers are vertices of a simplex. The algorithm complexity, measured in floating points operations, is O (n), where n is the sample size. The effectiveness of the proposed scheme is illustrated using simulated data.

Viscosity and self-diffusion coefficients of dialkyl adipates: a correlation scheme with predictive capabilities

A correlation and predictive scheme for the viscosity and self-diffusivity of liquid dialkyl adipates is presented. The scheme is based on the kinetic theory for dense hard-sphere fluids, applied to the van der Waals model of a liquid to predict the transport properties. A "universal" curve for a dimensionless viscosity of dialkyl adipates was obtained using recently published experimental viscosity and density data of compressed liquid dimethyl (DMA), dipropyl (DPA), and dibutyl (DBA) adipates. The experimental data are described by the correlation scheme with a root-mean-square deviation of +/- 0.34 %. The parameters describing the temperature dependence of the characteristic volume, V-0, and the roughness parameter, R-eta, for each adipate are well correlated with one single molecular parameter. Recently published experimental self-diffusion coefficients of the same set of liquid dialkyl adipates at atmospheric pressure were correlated using the characteristic volumes obtained from the viscosity data. The roughness factors, R-D, are well correlated with the same single molecular parameter found for viscosity. The root-mean-square deviation of the data from the correlation is less than 1.07 %. Tests are presented in order to assess the capability of the correlation scheme to estimate the viscosity of compressed liquid diethyl adipate (DEA) in a range of temperatures and pressures by comparison with literature data and of its self-diffusivity at atmospheric pressure in a range of temperatures. It is noteworthy that no data for DEA were used to build the correlation scheme. The deviations encountered between predicted and experimental data for the viscosity and self-diffusivity do not exceed 2.0 % and 2.2 %, respectively, which are commensurate with the estimated experimental measurement uncertainty, in both cases.