Virtual simulation of the postsurgical cosmetic outcome in patientswith pectus excavatum

Pectus excavatum is the most common congenital deformity of the anterior chest wall, in which several ribs and the sternum grow abnormally. Nowadays, the surgical correction is carried out in children and adults through Nuss technic. This technic has been shown to be safe with major drivers as cosmesis and the prevention of psychological problems and social stress. Nowadays, no application is known to predict the cosmetic outcome of the pectus excavatum surgical correction. Such tool could be used to help the surgeon and the patient in the moment of deciding the need for surgery correction. This work is a first step to predict postsurgical outcome in pectus excavatum surgery correction. Facing this goal, it was firstly determined a point cloud of the skin surface along the thoracic wall using Computed Tomography (before surgical correction) and the Polhemus FastSCAN (after the surgical correction). Then, a surface mesh was reconstructed from the two point clouds using a Radial Basis Function algorithm for further affine registration between the meshes. After registration, one studied the surgical correction influence area (SCIA) of the thoracic wall. This SCIA was used to train, test and validate artificial neural networks in order to predict the surgical outcome of pectus excavatum correction and to determine the degree of convergence of SCIA in different patients. Often, ANN did not converge to a satisfactory solution (each patient had its own deformity characteristics), thus invalidating the creation of a mathematical model capable of estimating, with satisfactory results, the postsurgical outcome

Thoracic wall reconstruction using ultrasound images to model/bend the thoracic prosthesis for correction of pectus excavatum

Pectus excavatum is the most common congenital deformity of the anterior thoracic wall. The surgical correction of such deformity, using Nuss procedure, consists in the placement of a personalized convex prosthesis into sub-sternal position to correct the deformity. The aim of this work is the CT-scan substitution by ultrasound imaging for the pre-operative diagnosis and pre-modeling of the prosthesis, in order to avoid patient radiation exposure. To accomplish this, ultrasound images are acquired along an axial plane, followed by a rigid registration method to obtain the spatial transformation between subsequent images. These images are overlapped to reconstruct an axial plane equivalent to a CT-slice. A phantom was used to conduct preliminary experiments and the achieved results were compared with the corresponding CT-data, showing that the proposed methodology can be capable to create a valid approximation of the anterior thoracic wall, which can be used to model/bend the prosthesis

Pectus Excavatum postsurgical outcome based on preoperative soft body dynamics simulation

Pectus excavatum is the most common congenital deformity of the anterior chest wall, in which an abnormal formation of the rib cage gives the chest a caved-in or sunken appearance. Today, the surgical correction of this deformity is carried out in children and adults through Nuss technic, which consists in the placement of a prosthetic bar under the sternum and over the ribs. Although this technique has been shown to be safe and reliable, not all patients have achieved adequate cosmetic outcome. This often leads to psychological problems and social stress, before and after the surgical correction. This paper targets this particular problem by presenting a method to predict the patient surgical outcome based on pre-surgical imagiologic information and chest skin dynamic modulation. The proposed approach uses the patient pre-surgical thoracic CT scan and anatomical-surgical references to perform a 3D segmentation of the left ribs, right ribs, sternum and skin. The technique encompasses three steps: a) approximation of the cartilages, between the ribs and the sternum, trough b-spline interpolation; b) a volumetric mass spring model that connects two layers - inner skin layer based on the outer pleura contour and the outer surface skin; and c) displacement of the sternum according to the prosthetic bar position. A dynamic model of the skin around the chest wall region was generated, capable of simulating the effect of the movement of the prosthetic bar along the sternum. The results were compared and validated with patient postsurgical skin surface acquired with Polhemus FastSCAN system

Assessment of 3D scanners for modeling Pectus Carinatum corrective bar

Pectus Carinatum (PC) is a chest deformity consisting on the anterior protrusion of the sternum and adjacent costal cartilages. Non-operative corrections, such as the orthotic compression brace, require previous information of the patient chest surface, to improve the overall brace fit. This paper focuses on the validation of the Kinect scanner for the modelling of an orthotic compression brace for the correction of Pectus Carinatum. To this extent, a phantom chest wall surface was acquired using two scanner systems – Kinect and Polhemus FastSCAN – and compared through CT. The results show a RMS error of 3.25mm between the CT data and the surface mesh from the Kinect sensor and 1.5mm from the FastSCAN sensor

Variations of the soft tissue thicknesses external to the ribs in Pectus Excavatum patients

Background: Surgical repair of pectus excavatum (PE) has become more popular due to improvements in the minimally invasive Nuss procedure. The pre-surgical assessment of PE patients requires Computerized Tomography (CT), as the malformation characteristics vary from patient to patient. Objective: This work aims to characterize soft tissue thickness (STT) external to the ribs among PE patients. It also presents a comparative analysis between the anterior chest wall surface before and after surgical correction. Methods: Through surrounding tissue segmentation in CT data, STT values were calculated at different lines along the thoracic wall, with a reference point in the intersection of coronal and median planes. The comparative analysis between the two 3D anterior chest surfaces sets a surgical correction influence area (SCIA) and a volume of interest (VOI) based on image processing algorithms, 3D surface algorithms, and registration methods. Results: There are always variations between left and right side STTs (2.54±2.05 mm and 2.95±2.97 mm for female and male patients, respectively). STTs are dependent on age, sex, and body mass index of each patient. On female patients, breast tissue induces additional errors in bar manual

Collecting system percutaneous access using real-time tracking sensors: first pig model in vivo experience

Purpose: Precise needle puncture of the renal collecting system is an essential but challenging step for successful percutaneous nephrolithotomy. We evaluated the efficiency of a new real-time electromagnetic tracking system for in vivo kidney puncture. Materials and Methods: Six anesthetized female pigs underwent ureterorenoscopy to place a catheter with an electromagnetic tracking sensor into the desired puncture site and ascertain puncture success. A tracked needle with a similar electromagnetic tracking sensor was subsequently navigated into the sensor in the catheter. Four punctures were performed by each of 2 surgeons in each pig, including 1 each in the kidney, middle ureter, and right and left sides. Outcome measurements were the number of attempts and the time needed to evaluate the virtual trajectory and perform percutaneous puncture. Results: A total of 24 punctures were easily performed without complication. Surgeons required more time to evaluate the trajectory during ureteral than kidney puncture (median 15 seconds, range 14 to 18 vs 13, range 11 to 16, p ¼ 0.1). Median renal and ureteral puncture time was 19 (range 14 to 45) and 51 seconds (range 45 to 67), respectively (p ¼ 0.003). Two attempts were needed to achieve a successful ureteral puncture. The technique requires the presence of a renal stone for testing. Conclusions: The proposed electromagnetic tracking solution for renal collecting system puncture proved to be highly accurate, simple and quick. This method might represent a paradigm shift in percutaneous kidney access techniques

Automatic prebent customized prosthesis for pectus excavatum minimally invasive surgery correction

Pectus excavatum is the most common deformity of the thorax. A minimally invasive surgical correction is commonly carried out to remodel the anterior chest wall by using an intrathoracic convex prosthesis in the substernal position. The process of prosthesis modeling and bending still remains an area of improvement. The authors developed a new system, i3DExcavatum, which can automatically model and bend the bar preoperatively based on a thoracic CT scan. This article presents a comparison between automatic and manual bending. The i3DExcavatum was used to personalize prostheses for 41 patients who underwent pectus excavatum surgical correction between 2007 and 2012. Regarding the anatomical variations, the soft-tissue thicknesses external to the ribs show that both symmetric and asymmetric patients always have asymmetric variations, by comparing the patients’ sides. It highlighted that the prosthesis bar should be modeled according to each patient’s rib positions and dimensions. The average differences between the skin and costal line curvature lengths were 84 ± 4 mm and 96 ± 11 mm, for male and female patients, respectively. On the other hand, the i3DExcavatum ensured a smooth curvature of the surgical prosthesis and was capable of predicting and simulating a virtual shape and size of the bar for asymmetric and symmetric patients. In conclusion, the i3DExcavatum allows preoperative personalization according to the thoracic morphology of each patient. It reduces surgery time and minimizes the margin error introduced by the manually bent bar, which only uses a template that copies the chest wall curvature.

Finite element analysis of pectus carinatum surgical correction via a minimally invasive approach

Pectus carinatum (PC) is a chest deformity caused by a disproportionate growth of the costal cartilages compared to the bony thoracic skeleton, pulling the sternum towards, which leads to its protrusion. There has been a growing interest on using the ‘reversed Nuss’ technique as minimally invasive procedure for PC surgical correction. A corrective bar is introduced between the skin and the thoracic cage and positioned on top of the sternum highest protrusion area for continuous pressure. Then, it is fixed to the ribs and kept implanted for about 2–3 years. The purpose of this work was to (a) assess the stresses distribution on the thoracic cage that arise from the procedure, and (b) investigate the impact of different positioning of the corrective bar along the sternum. The higher stresses were generated on the 4th, 5th and 6th ribs backend, supporting the hypothesis of pectus deformities correction-induced scoliosis. The different bar positioning originated different stresses on the ribs’ backend. The bar position that led to lower stresses generated on the ribs backend was the one that also led to the smallest sternum displacement. However, this may be preferred, as the risk of induced scoliosis is lowered.

FATORES DETERMINANTES DA DIVULGAÇÃO DE INFORMAÇÃO SOBRE RISCO DE LIQUIDEZ: EVIDÊNCIA EMPÍRICA NO SISTEMA FINANCEIRO PORTUGUÊS

The objectives of this empirical study are, on the one hand, to evaluate the level of disclosure, about liquidity risk, practiced by fourteen banking institutions that operate in Portuguese financial system, and, on the other hand, to assess the determinants of that disclosure. To this end, we have used content analysis, as data collection technique, and have examined the information disclosed in the annual reports of the fourteen banks, for the period between 2007 and 2011. For this purpose we have constructed a disclosure index, based on the recommendations of the Basel Committee on Banking Supervision, and have defined a set of potentially explanatory variables related to the level of disclosure. The results demonstrated that size and financial year were the variables that showed up as statistically significant in explaining the level of disclosure.

Aclimatização de mudas micropropagadas de Bastão do Imperador em diferentes volumes de recipientes

É crescente o mercado de flores tropicais no Brasil. No nordeste, por causa do clima, torna-se difícil a aclimatização dessas plantas. Portanto, este trabalho tem por objetivo determinar o recipiente mais adequado para aclimatizar mudas micropropagadas de bastão do imperador cv. Porcelana, em ambiente protegido. O experimento foi realizado em estufa e as mudas utilizadas foram obtidas por micropropagação. O delineamento experimental utilizado foi de blocos ao acaso, com quatro tratamentos (volumes) e cinco repetições. Os volumes dos recipientes testados foram: V1 - 50 cm³ (Copo pequeno - CP); V2 - 150 cm³ (Tubete pequeno - TP); V3 - 300 cm³ (Tubete grande - TG); V4 - 450 cm³(Vaso pequeno - VP). Foram coletados dados correspondentes ao número de folhas (NF), altura da muda (AM), diâmetro do pseudocaule (DP), massa fresca da parte aérea (MFPA), massa fresca do sistema radicular (MFSR), massa seca da parte aérea (MSPA) e massa seca do sistema radicular (MSSR). Foi realizada a análise de variância e os resultados de natureza qualitativa foram submetidos ao teste de média. O vaso de 450 cm³ é o recipiente mais adequado para aclimatização de bastão do imperador, pois proporcionou melhor desenvolvimento das mudas.

Comparison of pupil diameter and tear production in dogs treated with acepromazine, tramadol and their combination

Some ophthalmic surgeries require induction of mydriasis, however, drugs traditionally used for this purpose significantly reduces tear production. To evaluate the effect of acepromazine and tramadol, used alone or in combination, on pupil diameter, tear production, heart and respiratory rate, systolic blood pressure and rectal temperature, these drugs were administered to seven clinically normal dogs divided into three experimental groups (G1 - acepromazine; G2 - tramadol; G3 - tramadol + acepromazine) that differed only in the sedation protocol. Parameters were measured in four experimental moments. Miosis occurred in G1, in addition to reduced tear production and respiratory rate. No significant changes were found in the parameters assessed in G2, whereas in G3, there was decrease in tear production of the right eye, decrease in the respiratory rate and rectal temperature. Tramadol proved to be a drug suitable for pre-anesthetic procedures that require the maintenance of pupil diameter and keeps the tear production within normal parameters. However, the use of acepromazine alone or in combination with tramadol requires protection of the patient's eye surface to prevent the occurrence of undesirable ophthalmic changes.

Aloe vera-based formula as emollient on horses' hooves

The present study aimed at developing an Aloe vera-based formula for topical use on horse hoof and evaluating whether the treatment affects hooves growth and balance. Six healthy male horses between the ages of 3 and 17 years (12±5.25) were used, all semi-confined animals for breeding purposes. Before beginning A. vera treatment, animals underwent two trimming procedures with a 45 days-interval. After the second trimming, one of the forelimbs and one of the hindlimbs of 4 horses was weekly treated by topical application of the glycolic extract of A. vera at 20%. The contralateral limb, randomly chosen, received the extract at 50%. The hooves of the other animals were treated with propylene glycol. Treatment was done for 225 days and, during this time, animals underwent periodic trimming. Variables related to growth and balance of the hooves were measured before and after trimming. Data were analyzed using chi-square test and regression analysis at 5% significance. Growth rate of the hooves was not related to treatment. On the other hand, the 50% extract was related to the majority of the hooves in balance (p<0.05). Results suggest that a weekly topical treatment with A. vera glycolic extract does not improve the growth rate of the hooves; however, when applied at a high concentration, it improves their balance.

Atividade proteolítica de bactérias psicrotróficas em leites estocados em diferentes temperaturas

A difusão do uso da tecnologia do resfriamento, como estratégia para manutenção das características microbiológicas e organolépticas do leite, não associada aos cuidados básicos de higiene na obtenção do produto, fez com que os micro-organismos psicrotróficos emergissem como as principais bactérias deteriorantes da indústria láctea. Este estudo teve por objetivo avaliar como o metabolismo psicrotrófico proteolítico responde a diferentes temperaturas de incubação do leite, delineando um paralelo entre multiplicação de psicrotróficos, quantidade de micro-organismos com capacidade de hidrolisar proteínas e quantidade de GMP (glicomacropeptídeo) liberada. As amostras de leite, coletadas diretamente do tanque de resfriamento, foram submetidas à contagem de micro-organismos psicrotróficos, contagem de micro-organismos proteolíticos e determinação da concentração de GMP, em diferentes tempos (12 h; 24 h; 48 h) e temperaturas (4°C; 8°C; 12°C) de armazenamento. Não houve linearidade entre os parâmetros microbiológicos e o GMP aferido, segundo o binômio tempo/temperatura. A maior concentração de GMP (5,07 µg/mL) foi aferida no binômio 8°C/24 h (T8/M24). Esses dados indicam a necessidade de estudos sobre o metabolismo da microbiota psicrotrófica, de forma a elucidar questões básicas e de profunda relevância sobre seu metabolismo.

Nível de infestação de moscas-das-frutas em faixa de fronteira, no Rio Grande do Sul

As moscas-das-frutas são as principais pragas da fruticultura mundial, destacando-se os tefritídeos e os lonqueídeos, sendo que, sobre este último grupo de insetos, existem poucas informações a respeito do seu potencial de danos. O objetivo deste trabalho foi identificar os níveis de infestação de moscas-das-frutas, em municípios da faixa de fronteira do Rio Grande do Sul com a Argentina e o Uruguai. O estudo foi realizado em 2011 e 2012, nos municípios de Itaqui, Quaraí, Santana do Livramento e Uruguaiana, RS. Foram realizadas coletas de frutos de 19 espécies vegetais exóticas e nativas, calculando-se os índices de infestação em pupários/kg de fruto e pupários/fruto. O maior índice de infestação de Ceratitis capitata ocorreu em nectarineira, com 72,01 pupários/kg e 2,51 pupários/fruto. Anastrepha fraterculus apresentou índices elevados em cerejeira, correspondendo a 57,57 pupários/kg e 0,23 pupários/fruto. Os lonqueídeos foram representados pelos gêneros Neosilba e Lonchaea, infestando frutos de mamoeiro e caramboleira, respectivamente. Registra-se para os municípios estudados do Rio Grande do Sul a ocorrência das seguintes espécies de moscas-das-frutas: C. capitata, A. fraterculus, Neosilba zadolicha e Lonchaea sp.

Quedas em altura na construção em Portugal: um estudo sobre requisitos, omissões e melhorias na utilização de guarda corpos

As estatísticas informam que o acidente de trabalho de queda em altura é das principais causas de morte no setor da construção em Portugal. Com base nas lacunas legais nacionais e regulamentos normativos aplicáveis, pretende-se com a presente dissertação identificar medidas organizacionais e legais que contribuam para o aumento da eficácia da proteção coletiva temporária guarda corpos. A recolha de dados procedeu-se através de um inquérito por questionário, do qual se obtiveram 155 respostas de técnicos superiores de segurança e higiene no trabalho. Os resultados da análise e verificação das hipóteses concluem sobre a importância de outros requisitos não legislados ou usualmente não considerados. São estes, entre outros, os ensaios, a certificação, a altura mínima de implementação, procedimentos e registos específicos da sua utilização.