Road user attitudes and the safety of cyclists

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Design and evaluation of a framework for cooperative and adaptive QoS control of DSRC network for road safety applications

Dedicated short-range communications (DSRC) are a promising vehicle communication technique for collaborative road safety applications (CSA). However, road safety applications require highly reliable and timely wireless communications, which present big challenges to DSRC based vehicle networks on effective and robust quality of services (QoS) provisioning due to the random channel access method applied in the DSRC technique. In this paper we examine the QoS control problem for CSA in the DSRC based vehicle networks and presented an overview of the research work towards the QoS control problem. After an analysis of the system application requirements and the DSRC vehicle network features, we propose a framework for cooperative and adaptive QoS control, which is believed to be a key for the success of DSRC on supporting effective collaborative road safety applications. A core design in the proposed QoS control framework is that network feedback and cross-layer design are employed to collaboratively achieve targeted QoS. A design example of cooperative and adaptive rate control scheme is implemented and evaluated, with objective of illustrating the key ideas in the framework. Simulation results demonstrate the effectiveness of proposed rate control schemes in providing highly available and reliable channel for emergency safety messages. © 2013 Wenyang Guan et al.

Examining links between cognitive markers, movement initiation and change, and pedestrian safety in older adults

Objective: The purpose of this study was to determine the extent to which mobility indices (such as walking speed and postural sway), motor initiation, and cognitive function, specifically executive functions, including spatial planning, visual attention, and within participant variability, differentially predicted collisions in the near and far sides of the road with increasing age. Methods: Adults aged over 45 years participated in cognitive tests measuring executive function and visual attention (using Useful Field of View; UFoV®), mobility assessments (walking speed, sit-to-stand, self-reported mobility, and postural sway assessed using motion capture cameras), and gave road crossing choices in a two-way filmed real traffic pedestrian simulation. Results: A stepwise regression model of walking speed, start-up delay variability, and processing speed) explained 49.4% of the variance in near-side crossing errors. Walking speed, start-up delay measures (average & variability), and spatial planning explained 54.8% of the variance in far-side unsafe crossing errors. Start-up delay was predicted by walking speed only (explained 30.5%). Conclusion: Walking speed and start-up delay measures were consistent predictors of unsafe crossing behaviours. Cognitive measures, however, differentially predicted near-side errors (processing speed), and far-side errors (spatial planning). These findings offer potential contributions for identifying and rehabilitating at-risk older pedestrians.

Making the construction industry resilient to extreme weather:lessons from construction in hot weather conditions

The construction industry is susceptible to extreme weather events (EWEs) due to most of its activities being conducted by manual workers outdoors. Although research has been conducted on the effects of EWEs, such as flooding and snowfall, limited research has been conducted on the effects of heatwaves and hot weather conditions. Heatwaves present a somewhat different risk profile to construction, unlike EWEs such as flooding and heavy snowfall that present physical obstacles to work onsite. However, heatwaves have affected the construction industry in the UK, and construction claims have been made due to adverse weather conditions. With heatwaves being expected to occur more frequently in the coming years, the construction industry may suffer unlike any other industry during the summer months. This creates the need to investigate methods that would allow construction activities to progress during hot summer months with minimal effect on construction projects. Hence, the purpose of this paper. Regions such as the Middle East and the UAE in particular flourish with mega projects, although temperatures soar to above 40̊C in the summer months. Lessons could be learnt from such countries and adapted in the UK. Interviews have been conducted with a lead representative of a client, a consultant and a contractor, all of which currently operate on UAE projects. The key findings include one of the preliminary steps taken by international construction companies operating in the UAE. This involves restructuring their entire regional team by employing management staff from countries such as Lebanon, Palestine, Iraq, and their labour force from the sub-continent such as India and Pakistan. This is not only due to the cheap wage rate but also to the ability to cope and work in such extreme hot weather conditions. The experience of individuals working in the region allows for future planning, where the difference in labour productivity during the extreme hot weather conditions is known, allowing precautionary measures to be put in place.

Adaptive power and rate control for QoS guarantee of DSRC based collaborative road safety applications

In this paper we propose an adaptive power and message rate control method for safety applications at road intersections. The design objectives are to firstly provide guaranteed QoS support to both high priority emergency safety applications and low priority routine safety applications and secondly maximize channel utilization. We use an offline simulation based approach to find out the best possible configurations of transmit power and message rate for given numbers of vehicles in the network with certain safety QoS requirements. The identified configurations are then used online by roadside access points (AP) adaptively according to estimated number of vehicles. Simulation results show that this adaptive method could provide required QoS support to safety applications and it significantly outperforms a fixed control method. © 2013 International Information Institute.

Performance evaluation of adaptive context aware rate selection algorithm (ACARS) for road safety applications in vehicular network

One of the major drawbacks for mobile nodes in wireless networks is power management. Our goal is to evaluate the performance power control scheme to be used to reduce network congestion, improve quality of service and collision avoidance in vehicular network and road safety application. Some of the importance of power control (PC) are improving spatial reuse, and increasing network capacity in mobile wireless communications. In this simulation we have evaluated the performance of existing rate algorithms compared with context Aware Rate selection algorithm (ACARS) and also seen the performance of ACARS and how it can be applied to road safety, improve network control and power management. Result shows that ACARS is able to minimize the total transmit power in the presence of propagation processes and mobility of vehicles, by adapting to the fast varying channels conditions with the Path loss exponent values that was used for that environment which is shown in the network simulation parameter. Our results have shown that ACARS is a very robust algorithm which performs very well with the effect of propagation processes that is prone to every transmitted signal in mobile networks. © 2013 IEEE.

Achieving zero accidents—A strategic framework for continuous safety improvement in the construction industry

In the U.S., construction accidents remain a significant economic and social problem. Despite recent improvement, the Construction industry, generally, has lagged behind other industries in implementing safety as a total management process for achieving zero accidents and developing a high-performance safety culture. One aspect of this total approach to safety that has frustrated the construction industry the most has been “measurement”, which involves identifying and quantifying the factors that critically influence safe work behaviors. The basic problem attributed is the difficulty in assessing what to measure and how to measure it—particularly the intangible aspects of safety. Without measurement, the notion of continuous improvement is hard to follow. This research was undertaken to develop a strategic framework for the measurement and continuous improvement of total safety in order to achieve and sustain the goal of zero accidents, while improving the quality, productivity and the competitiveness of the construction industry as it moves forward. The research based itself on an integral model of total safety that allowed decomposition of safety into interior and exterior characteristics using a multiattribute analysis technique. Statistical relationships between total safety dimensions and safety performance (measured by safe work behavior) were revealed through a series of latent variables (factors) that describe the total safety environment of a construction organization. A structural equation model (SEM) was estimated for the latent variables to quantify relationships among them and between these total safety determinants and safety performance of a construction organization. The developed SEM constituted a strategic framework for identifying, measuring, and continuously improving safety as a total concern for achieving and sustaining the goal of zero accidents.

An examination of psychological meaningfulness, safety, and availability as the underlying mechanisms linking job features and personal characteristics to work engagement

The present study tested a nomological net of work engagement that was derived from its extant research. Two of the main work engagement models that have been presented and empirically tested in the literature, the JD-R model and Kahn's model, were integrated to test the effects that job features and personal characteristics can have on work engagement through the psychological conditions of meaningfulness, safety, and availability. In this study, safety refers to psychological perceptions of safety and not workplace safety behaviors. The job features that were tested in this model included person-job fit, autonomy, co-worker relations, supervisor support, procedural justice, and interactional justice, while the personal characteristics consisted of self-consciousness, self-efficacy, extraversion, and neuroticism. Thirty-four hypotheses and a conceptual model were tested in order to establish the viability of this nomological net of work engagement in which it was expected that meaningfulness would mediate the relationships between job features and work engagement, safety would mediate the relationships that job features and personal characteristics have with work engagement, and availability (physical, emotional, and cognitive resources) would mediate the relationships that personal characteristics have with work engagement. Furthermore, analyses were run in order to determine the factor structure of work engagement, assess whether or not it exhibits differential validity from organizational commitment and job satisfaction, and confirm that it is positively related to the outcome variable of organizational citizenship behavior (OCB). The final sample consisted of 500 workers from an online labor market who responded to a questionnaire composed of measures of all constructs included in this study. Findings show that work engagement is best represented as a three-factor construct, composed of vigor, dedication and absorption. Furthermore, support was found for the distinction of work engagement from the related constructs of organizational commitment and job satisfaction. With regard to the proposed model, meaningfulness proved to be the strongest predictor of work engagement. Results show that it partially mediates the relationships that all job features have with work engagement. Safety proved to be a partial mediator of the relationships that autonomy, co-worker relations, supervisor support, procedural justice, interactional justice, and self-efficacy have with work engagement, and fully mediate the relationship between neuroticism and work engagement. Findings also show that availability partially mediates the positive relationships that extraversion and self-efficacy have with work engagement, and fully mediates the negative relationship that neuroticism has with work engagement. Finally, a positive relationship was found between work engagement and OCB. Research and organizational implications are discussed.

A Framework for Spatial Road Safety Assessment: Case Study of Northern Ireland

Road traffic injuries are a major health issue worldwide. There are many factors that can
affect the levels of road traffic collisions which in turn increase the levels of people killed or
seriously injured. When road traffic collisions occur, observed facts are recorded in relation
to the incident. These facts are recorded as variable observations, and for this study,
variables and indicators are defined almost equivalently. There can be hundreds of different
indicators for the various collisions, as different countries face different road situations. This
makes it difficult to perform a road safety assessment, which can be applied globally. The
goal of this study is to select the most appropriate indicators and create a composite
indicator as a function of these indicators, which can be used as summary values, allowing
ease of comparisons between the countries/regions that have undergone a road safety
assessment. The composite indicator will then be used to assess the current situation in
Northern Ireland and provide scores for ranking policing in terms of overall road safety on
their road networks.

Safety Assessment Tool for Construction Zone Work Phasing Plans, 2016

The Highway Safety Manual (HSM) is the compilation of national safety research that provides quantitative methods for analyzing highway safety. The HSM presents crash modification functions related to freeway work zone characteristics such as work zone duration and length. These crash modification functions were based on freeway work zones with high traffic volumes in California. When the HSM-referenced model was calibrated for Missouri, the value was 3.78, which is not ideal since it is significantly larger than 1. Therefore, new models were developed in this study using Missouri data to capture geographical, driver behavior, and other factors in the Midwest. Also, new models for expressway and rural two-lane work zones that barely were studied in the literature were developed. A large sample of 20,837 freeway, 8,993 expressway, and 64,476 rural two-lane work zones in Missouri was analyzed to derive 15 work zone crash prediction models. The most appropriate samples of 1,546 freeway, 1,189 expressway, and 6,095 rural two-lane work zones longer than 0.1 mile and with a duration of greater than 10 days were used to make eight, four, and three models, respectively. A challenging question for practitioners is always how to use crash prediction models to make the best estimation of work zone crash count. To solve this problem, a user-friendly software tool was developed in a spreadsheet format to predict work zone crashes based on work zone characteristics. This software selects the best model, estimates the work zone crashes by severity, and converts them to monetary values using standard crash estimates. This study also included a survey of departments of transportation (DOTs), Federal Highway Administration (FHWA) representatives, and contractors to assess the current state of the practice regarding work zone safety. The survey results indicate that many agencies look at work zone safety informally using engineering judgment. Respondents indicated that they would like a tool that could help them to balance work zone safety across projects by looking at crashes and user costs.

Objective Methods for Characterizing Physical Exposures which may contribute to Work-related Musculoskeletal Disorders in Agricultural Workers

Thesis (Ph.D.)--University of Washington, 2016-08

Beyond physical health and safety : supporting the wellbeing of workers employed in the forest industry

An Examination of Psychological Meaningfulness, Safety, and Availability as the Underlying Mechanisms linking Job Features and Personal Characteristics to Work Engagement

The present study tested a nomological net of work engagement that was derived from its extant research. Two of the main work engagement models that have been presented and empirically tested in the literature, the JD-R model and Kahn’s model, were integrated to test the effects that job features and personal characteristics can have on work engagement through the psychological conditions of meaningfulness, safety, and availability. In this study, safety refers to psychological perceptions of safety and not workplace safety behaviors. The job features that were tested in this model included person-job fit, autonomy, co-worker relations, supervisor support, procedural justice, and interactional justice, while the personal characteristics consisted of self-consciousness, self-efficacy, extraversion, and neuroticism. Thirty-four hypotheses and a conceptual model were tested in order to establish the viability of this nomological net of work engagement in which it was expected that meaningfulness would mediate the relationships between job features and work engagement, safety would mediate the relationships that job features and personal characteristics have with work engagement, and availability (physical, emotional, and cognitive resources) would mediate the relationships that personal characteristics have with work engagement. Furthermore, analyses were run in order to determine the factor structure of work engagement, assess whether or not it exhibits differential validity from organizational commitment and job satisfaction, and confirm that it is positively related to the outcome variable of organizational citizenship behavior (OCB). The final sample consisted of 500 workers from an online labor market who responded to a questionnaire composed of measures of all constructs included in this study. Findings show that work engagement is best represented as a three-factor construct, composed of vigor, dedication and absorption. Furthermore, support was found for the distinction of work engagement from the related constructs of organizational commitment and job satisfaction. With regard to the proposed model, meaningfulness proved to be the strongest predictor of work engagement. Results show that it partially mediates the relationships that all job features have with work engagement. Safety proved to be a partial mediator of the relationships that autonomy, co-worker relations, supervisor support, procedural justice, interactional justice, and self-efficacy have with work engagement, and fully mediate the relationship between neuroticism and work engagement. Findings also show that availability partially mediates the positive relationships that extraversion and self-efficacy have with work engagement, and fully mediates the negative relationship that neuroticism has with work engagement. Finally, a positive relationship was found between work engagement and OCB. Research and organizational implications are discussed.

Management of safety climate and the psychosocial work environment – new challenges for occupational health and safety professionals?

Introduction: The work environment and Occupational Health and Safety (OHS) practice have changed over the last number of years. A holistic OHS approach has been recommended by the authorities in this field (e.g. World Health Organisation (WHO), European Agency for Safety and Health at Work (EU-OSHA) and the International Labour Organisation (ILO)). This involves a unified action engaging elements of the physical and psychosocial workplace with greater focus on prevention and promotion of health and wellbeing. The health and safety practitioner (HSP) has been recognised as one of the main agents for implementation of OHS. Within an organisation they act as a leader of change and a professional who shapes health and safety while safeguarding the wellbeing of individuals at work. Additionally, safety climate (SC) has been developed as an essential concept for OHS of an organisation, its productivity and the wellbeing of its workforce. Scholars and practitioners have recognised the great need for further empirical evidence on the HSP’s role in a changing work environment that increasingly requires the use of preventative measures and the assessment and management of psychosocial work-related risks. This doctoral research brings together the different concepts used in OHS and Public Health including SC, Psychosocial workplace risks, Health Promotion and OHS performance. The associations between these concepts are analysed bearing in mind the WHO Healthy Workplace Framework and three of its main components (physical and psychosocial work environment and health resources). This thesis aims to establish a deeper understanding of the practice and management of OHS in Ireland and the UK, exploring the role of HSPs (employed in diverse sectors of activity) and of SC in the OHS of organisations. Methods: One systematic review and three cross-sectional research studies were performed. The systematic review focussed on the evidence compiled for the association of SC with accidents and injuries at work, clarifying this concept’s definition and its most relevant dimensions. The second article (chapter 3) explored the association of SC with accidents and injuries in a sample of workers (n=367) from a pharmaceutical industry and compared permanent with non-permanent workers. Associations of safety climate with employment status and with self-reported occupational accidents/injuries were studied through logistic regression modelling. The third and fourth papers in this thesis investigated the main tasks performed by HSPs, their perceptions of SC, health climate (HC), psychosocial risk factors and health outcomes as well as work efficacy. Validated questionnaires were applied to a sample of HSPs in Ireland and UK, members of the Institute of Occupational Safety and Health (n=1444). Chi-square analysis and logistic regression were used to assess the association between HSPs work characteristics and their involvement in the management of Psychosocial Risk Factors, Safety Culture and Health Promotion (paper 3). Multiple linear regression analysis was used to determine the association between SC, HC, psychosocial risk factors and health outcomes (general health and mental wellbeing) and self-efficacy. Results: As shown in the systematic review, scientific evidence is unable to establish the widely assumed causal link between SC and accidents and injuries. Nevertheless, the current results suggested that, particularly, the organisational dimensions of SC were associated with accidents and injuries and that SC is linked to health, wellbeing and safety performance in the organisation. According to the present research, contingent workers had lower SC perceptions but showed a lower accident/injury rate than their permanent colleagues. The associations of safety climate with accidents/injuries had opposite directions for the two types of workers as for permanent employees it showed an inverse relationship while for temporary workers, although not significant, a positive association was found. This thesis’ findings showed that HSPs are, to a very small degree, included in activities related to psychosocial risk management and assessment, to a moderate degree, involved in HP activities and, to a large degree, engaged in the management of safety culture in organisations. In the final research study, SC and HC were linked to job demands-control-support (JDCS), health, wellbeing and efficacy. JDCS were also associated with all three outcomes under study. Results also showed the contribution of psychosocial risk factors to the association of SC and HC with all the studied outcomes. These associations had rarely been recorded previously. Discussion & Conclusions: Health and safety climate showed a significant association with health, wellbeing and efficacy - a relationship which affects working conditions and the health and wellbeing of the workforce. This demonstrates the link of both SC and HC with the OHS and the general strength or viability of organisations. A division was noticed between the area of “health” and “safety” in the workplace and in the approach to the physical and psychosocial work environment. These findings highlighted the current challenge in ensuring a holistic and multidisciplinary approach for prevention of hazards and for an integrated OHS management. HSPs have shown to be a pivotal agent in the shaping and development of OHS in organisations. However, as observed in this thesis, the role of these professionals is still far from the recommended involvement in the management of psychosocial risk factors and could have a more complete engagement in other areas of OHS such as health promotion. Additionally, a strong culture of health and safety with supportive management and buy-in from all stakeholders is essential to achieve the ideal unified and prevention-focussed approach to OHS as recommended by the WHO, EU-OSHA and ILO.

Relación entre la calificación de los elementos de un sistema de gestión y los indicadores de accidentalidad en empresas del sector de la construcción en Colombia

El presente estudio tiene como objetivo determinar la relación que existe entre la implementación de un sistema de gestión de seguridad y salud en el trabajo (SGSST), y la frecuencia y la severidad de la accidentalidad en la industria de la construcción en Colombia. Para ello se seleccionaron 35 empresas que realizan actividades relacionadas con la edificación, infraestructura e interventoría, que hubiesen implementado un SGSST para la intervención de los riesgos de accidentes y que contaran con la evaluación del mismo. La evaluación del SGSST está enmarcada en cinco dimensiones o criterios: planeación, política, implementación, manejo integral del accidente y revisión por la gerencia. Cada una evaluada a través de diferentes requisitos y se presentan en una escala de 1 a 10, siendo 10 el nivel más alto del cumplimiento por requisito. Teniendo los resultados de esta calificación, la tasa (proporción entre los accidentes reportados y los trabajadores de cada empresa) y los días de incapacidad (ausentismo por accidente de trabajo), se realizó un análisis de las medidas descriptivas consolidado por las empresas del estudio: tendencia central y dispersión para número de trabajadores, tasa de accidentalidad, días de incapacidad y el resultado de los totales de cada criterio de la evaluación y el gran total. Para estudiar la relación entre los resultados de la evaluación y los indicadores de tasa y días, se llevó a cabo un análisis de correlación y regresión lineal entre los indicadores de accidentalidad y los resultados de las puntuaciones de los criterios. Esta correlación se realizó tanto para la primera evaluación como para la segunda. En las dos mediciones las correlaciones fueron negativas mostrando que existe una disminución en la tasa de accidentalidad y días de incapacidad entre una evaluación y la otra. En el análisis de regresión, en la primera evaluación por cada unidad que aumentó la calificación global, se presentó una reducción de la tasa de frecuencia de 0.140. En la segunda evaluación por cada unidad que aumentó la calificación global, la tasa se redujo en 0.159. Ambos hallazgos soportan la necesidad de implementar un SGSST para ayudar a reducir el número inaceptable de lesiones y enfermedades en la industria de la construcción.