Effects of casting solvents on the formation of inverted phase in block copolymer thin films

Previously, an inverted phase (the minority blocks comprising the continuum phase) was found in solution-cast block copolymer thin films. In this study, the effect of casting solvents on the formation of inverted phase has been studied. Two block copolymers, poly(styrene-b-butadiene) (SB) (M-w = 73 930 Da) and poly(styrene-b-butadiene-b-styrene) (SBS) (M-w = 140 000 Da), with comparable block lengths and equal polystyrene (PS) weight fraction (similar to30 wt %) were used. The copolymer thin films were cast from different solvents, toluene, benzene, cyclohexane, and binary mixtures of benzene and cyclohexane. Toluene and benzene are good solvents for both PS and PB, but have a preferential affinity for PS, while cyclohexane is a good solvent for PB but a Theta solvent for PS (T-Theta = 34.5 degreesC). The differential solvent affinity for PS and PB was estimated in terms of a difference between the polymer-solvent interaction parameter, chi, for each block. Under an extremely slow solvent evaporation rate, the time-dependent phase behavior during such a solution-to-film process was examined by freeze-drying the samples at different stages, corresponding to different copolymer concentrations, rho.

Determination of molecular weight and molecular sizes of polymers by high temperature gel permeation chromatography with a static and dynamic laser light scattering detector

Flow-mode static and dynamic laser light scattering (SLS/DLS) studies of polymers, including polystyrene, polyethylene, polypropylene and poly(dimethylsiloxane) (PDMS), in 1,2,4-trichlorobenzene (TCB) at 150 degreesC were performed on a high temperature gel permeation chromatography (GPC) coupled with a SLS/DLS detector. Both absolute molecular weight (M) and molecular sizes (radius of gyration, R-g and hydrodynamic radius, R-h) of polymers eluting from the GPC columns were obtained simultaneously. The conformation of different polymers in TCB at 150 degreesC were discussed according to the scaling relationships between R-g, R-h and M and the rho-ratio (p = R-g/R-h). Flow-mode DLS results of PDMS were verified by batch-mode DLS study of the same sample. The presented technique was proved to be a convenient and quick method to study the shape and conformation of polymers in solution at high temperature. However, the flow-mode DLS was only applicable for high molecular weight polymers with a higher refractive index increment such as PDMS.

Theoretical estimation of thermodynamic properties of the system PS/PPO on the basis of modified combining rule of Sanchez-Lacombe lattice fluid model

The three scaling parameters described in Sanchez-Lacombe lattice fluid theory (SLLFT), T*, P* and rho* of pure polystyrene (PS), pure poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) and their mixtures are obtained by fitting corresponding experimental pressure volume-temperature data with equation-of-state of SLLFT. A modified combining rule in SLLFT used to match the volume per mer, v* of the PS/PPO mixtures was advanced and the enthalpy of mixing and Flory-Huggins (FH) interaction parameter were calculated using the new rule. It is found that the difference between the new rule and the old one presented by Sanchez and Lacombe is quite small in the calculation of the enthalpy of mixing and FH interaction parameter and the effect of volume-combining rule on the calculation of thermodynamic properties is much smaller than that of energy-combining rule. But the relative value of interaction parameter changes much due to the new volume-based combining rule. This effect can affect the position of phase diagram very much, which is reported elsewhere [Macromolecules 34 (2001) 6291]

Dependence of linear electro-optic coefficient on difference in the atomic sizes in zinc blende crystals

Covalent radii of the bonding elements have strong effects on the linear electro-optic coefficients of zinc blende crystals; these effects can be quantitatively determined by investigating the relation between the difference in the atomic sizes rho and the magnitude of the linear electro-optic tensor coefficient r(41). It is interesting to note that for the same cation Zn2+, Ga3+, or In3+ the magnitude of r(41) increases with increased covalent radius of the bonded anion r(beta). Especially with the increasing tendency of the parameter rho, the magnitude of r(41) of crystals that have a same cation will increase suddenly when the value of r(beta) becomes larger. (C) 1997 Academic Press.

Compatibility and specific interactions in poly(beta-hydroxybutyrate) and poly(p-vinylphenol) blends

The miscibility and specific interactions in poly (beta-hydroxybutyrate) (PHB)/poly(p-vinylphenol) (PVPh) blends were studied by differential scanning calorimetry(DSC) , fourier transform infrared(FTIR) spectrometer and high resolution solid state C-13 NMR, A single composition-dependent glass transition temperatures were obtained by DSC which indicate the blends of PHB/PVPh were miscible in the melt state, The experimental glass transition temperatures were fitted quite well with those obtained from Couchman-Karasz equation. The FTIR study shows that the strong intermolecular hydrogen bonding exists in blends of PHB with strong proton acceptor and PVPh with strong proton donor and is the origin of its compatibility. The CPMAS C-13 NMR spectra also show that the strong hydrogen bonding exists in PHB/PVPh blends. From the T-1 rho(H) relaxation time it follows that the blends of PHB/PVPh(40/60, 20/80) studied are completely homogeneous on the scale of about 3.2 nm.

Crystal structure of the blend of polyamide 1010 with a bismaleimide by WAXD and SAXS

The blend polyamide 1010/N,N'-(diphenylmethane-4,4'-diyl)bismaleimide (PA1010/ BMI) has been investigated by means of WAXD and SAXS. The results obtained with the help of the Ruland, variance and 1D EDCF analysis showed that the degree of crystallinity (W-c,W-x), crystallite size (L(hikl)), long period (L) and thickness of average crystal lamellae (d) decrease with BMI content. Experimental and calculated density values (rho(c)) are in good agreement. Addition of BMT to PA1010 causes an increase in structural distortion. The results from SAXS analysis also supported that a crystalline amorphous interphase exists in the lamellae of semicrystalline polymers, so that a three-phase model instead of the traditional two-phase model should be used.

STATISTICAL THERMODYNAMICS OF POLYDISPERSE POLYMER MIXTURES

A statistical thermodynamics theory of polydisperse polymer blends based on a lattice model description of a fluid is formulated. Characterization of a binary polydisperse polymer mixture requires a knowledge of the pure polymer system and the interaction energy. It is assumed that the intrinsic and interactive properties of polymer (for example, T*, P*, rho*, and epsilon(ij)*) are independent of molecular size. Thermodynamic properties of ternary and higher order mixtures are completely defined in terms of the pure fluid polymer parameters and the binary interaction energies. Thermodynamic stability criteria for the phase transitions of a binary mixture are shown. The binodal and spinodal of general binary systems and of special binary systems are discussed.

CRYSTAL-STRUCTURE AND THERMODYNAMIC PARAMETERS OF NYLON-1010

WAXD, SAXS, FTIR, DSC and density techniques have been used to investigate the crystal structure, crystal density rho(c), amorphous density rho(a), equilibrium heat of fusion DELTAH(m)degrees and equilibrium melting temperature T(m)degrees. By extrapolating the straight lines in the FTIR absorbance against density plot to zero intensity, rho(c) and rho(a) were estimated to be 1.098 and 1.003 g/cm3 respectively. The rho(c) obtained was too low in value. From X-ray diffraction patterns of uniaxially oriented fibres, the crystal structure of Nylon-1010 was determined. The Nylon-1010 crystallized in the triclinic system, with lattice dimensions: a = 4.9 angstrom, b = 5.4 angstrom, c = 27.8 angstrom, alpha = 49-degrees, beta = 77-degrees, gamma = 63.5-degrees. The unit cell contained one monomeric unit, the space group was P1BAR, and the correct value of rho(c) was 1.135 g/cm3. The degree of crystallinity of the polymer was determined as about 60% (at RT) using Ruland's method. SAXS has been used to investigate the crystalline lamellar thickness, long period, transition zone, the specific inner surface and the electron density difference between the crystalline and amorphous regions for Nylon-1010. The analysis of data was based upon a one-dimensional electron-density correlation function. DELTAH(m)degrees was estimated to be 244.0 J/g by extrapolation of DELTAH(m)degrees in the plot of heat of fusion against specific volume of semicrystalline specimens to the completely crystalline condition (V(sp)c = 1/rho(c)). Owing to the ease of recrystallization of melt-crystallized Nylon-1010 specimens, the well-known Hoffman's T(m)-T(c) method failed in determining T(m)degrees and a Kamide double extrapolation method was adopted. The T(m)degrees value so obtained was 487 K.

Haematopoietic lineage cell-specific protein 1 (HS1) promotes actin-related protein (Arp) 2/3 complex-mediated actin polymerization

HS1 (haematopoietic lineage cell-specific gene protein 1), a prominent substrate of intracellular protein tyrosine kinases in haematopoietic cells, is implicated in the immune response to extracellular stimuli and in cell differentiation induced by cytokines. Although HS1 contains a 37-amino acid tandem repeat motif and a C-terminal Src homology 3 domain and is closely related to the cortical-actin-associated protein cortactin, it lacks the fourth repeat that has been shown to be essential for cortactin binding to filamentous actin (F-actin). In this study, we examined the possible role of HS1 in the regulation of the actin cytoskeleton. Immunofluorescent staining demonstrated that HS1 co-localizes in the cytoplasm of cells with actin-related protein (Arp) 2/3 complex, the primary component of the cellular machinery responsible for de novo actin assembly. Furthermore, recombinant HS1 binds directly to Arp2/3 complex with an equilibrium dissociation constant (K-d) of 880 nM. Although HS1 is a modest F-actin-binding protein with a Kd of 400 nM, it increases the rate of the actin assembly mediated by Arp2/3 complex, and promotes the formation of branched actin filaments induced by Arp2/3 complex and a constitutively activated peptide of N-WASP (neural Wiskott-Aldrich syndrome protein). Our data suggest that HS1, like cortactin, plays an important role in the modulation of actin assembly.

螺旋藻丝氨酸/苏氨酸激酶基因家族的克隆与表达分析

螺旋藻（Spirulina)，是丝状不形成异型胞的蓝藻，由于其所蕴涵的高品质营养成分而成为一属具有重要经济价值的微藻。丝氨酸/苏氨酸激酶（serine/threonine kinases，STK）系统在螺旋藻的信号转导中发挥了重要作用。螺旋藻生活环境复杂，其中温度是中国北方温带地区螺旋藻大规模养殖的主要限制性因素。本文克隆了一条螺旋藻STK基因，并初步从STK激酶基因家族的角度探索了螺旋藻对高温环境的适应。主要结果如下： 1. 构建了插入片段为1-2kb的螺旋藻基因组文库。基于该文库用简并引物PCR的方法得到了一条螺旋藻STK基因5'端长度为504bp的基因组序列。 2．以本实验室构建的螺旋藻基因组草图为基础，在基因组水平上研究了螺旋藻STK基因家族的特点。发现螺旋藻草图中STK基因家族共包含33个基因，这些基因基于蛋白结构域分析可以分为三大类群。序列保守性分析发现，螺旋藻STK激酶具有与真核STK激酶相同的保守域，此外螺旋藻STK激酶还具有特有的保守氨基酸。 3．在中国北方温带地区，螺旋藻大规模养殖的主要限制性因素是温度。由于北方地区温度较低，螺旋藻规模养殖普遍存在年养殖期较短的问题，造成设备浪费，若采用加温措施又增加养殖成本；而在夏季晴天中午，又存在高温胁迫的问题。跨膜蛋白是信号转导的第一阶段，因此我们设置了不同温度来诱导螺旋藻，对其中7个跨膜STK基因进行半定量RT-PCR分析，结果显示STK2103在不同温度下表达量不同，推测该蛋白参与了螺旋藻温度相关的信号转导过程。 本文将基础研究与实验验证相结合，为螺旋藻的信号转导研究提供了线索。

两种蓝藻真核型Ser/Thr激酶基因功能的初步验证

Ser/Thr蛋白激酶（serine/threonine kinases，STK）在真核生物的信号转导通路中具有重要作用，而且已经成为对抗肿瘤、结核等多种人类疾病的药物作用靶点。上世纪九十年代，有研究发现STK在原核生物的信号转导中也发挥重要作用。本论文以聚球藻PCC7942（Synechococcus sp. PCC7942）和钝顶螺旋藻（Spirulina platensis）为材料，对几个真核型的Ser/Thr蛋白激酶基因的功能进行了初步验证。 蓝藻兼具细菌和植物的特点，具有成熟的转化体系，为真核生物基因功能的研究提供了新的模式宿主。聚球藻PCC7942是一种单细胞的淡水蓝藻，具有天然的外源DNA转化系统，是蓝藻分子遗传学研究的模式生物。通过基因敲除及表达差异分析发现聚球藻PCC7942中的Ser/Thr蛋白激酶stk196参与高温胁迫的信号传递。钝顶螺旋藻是原核丝状蓝藻，由于其蕴涵高品质营养成分而成为一类具有重要经济价值的微藻，该研究利用半定量RT-PCR方法，分析四个具有跨膜结构域的Ser/Thr蛋白激酶在正常生长温度下和经低温、高温诱导后表达量的变化情况，发现stk2103在低温诱导后的表达量降低，高温诱导后的表达量升高，提示该基因的表达可能参与了钝顶螺旋藻对温度的适应。 蓝藻中真核型Ser/Thr蛋白激酶功能的研究为我们进一步研究真核生物的Ser/Thr蛋白激酶功能提供了借鉴，并对植物抗逆胁迫的研究提供重要的理论依据。

PLCß介导的钙调腺苷酸环化酶在突触可塑性相关基因转录中的作用和FE65对海马依赖学习及LTP的调节

Gene regulation is required for activity-dependent changes in synaptic plasticity and remodeling. The metabotropic glutamate receptors (mGluRs) contribute to different brain functions, including learning/memory, mental disorders, drug addiction, and persistent pain in the CNS. We found that Gp I mGluRs activate PLCß through Gq and then lead to activation of several calcium-dependent signaling pathways, including ERK, which play an important role in gene transcription. These findings support a calcium-dependent role for Gq in release of Calcium and activation of calcium-stimulated adenylyl cyclases I in activity-dependent transcription in response to application of group I metabotropic glutamate receptors agonist and may provide insights into group I mGluRs-dependent synaptic plasticity through MAP kinases signaling. Moreover, the present study investigated the transcription-dependent changes of Arc in response to the activation of group I mGluRs and suggested the central role of ERK1/2 in group I mGluR-mediated Arc transcription. Further, we selected APP-interaction protein FE65 to investigate the mechanism of transcription-related process in synaptic plasticity. FE65 is expressed predominantly in the brain, and interacts with the C-terminal domain of β-amyloid precursor protein (APP). We examined hippocampus-dependent memory and in vivo long-term potentiation (LTP) at the CA1 synapses with the isoform-specific FE65 knock-out (p97FE65-/-) mice. p97FE65 knock-out mice showed impaired short-term memory for both TDPA and CFC when tested 10min after training, which is transcription-independent. Consistently, at the Schaffer collateral-CA1 synapses, p97FE65 knock-out mice showed defective early phase LTP. These results demonstrate novel roles of FE65 in synaptic plasticity, acquisition, and retention for certain forms of memory formation.

Development of process control methodology for tracking the quality and safety of pain, agitation and sedation management in critical care units

Objective: To develop sedation, pain, and agitation quality measures using process control methodology and evaluate their properties in clinical practice. Design: A Sedation Quality Assessment Tool was developed and validated to capture data for 12-hour periods of nursing care. Domains included pain/discomfort and sedation-agitation behaviors; sedative, analgesic, and neuromuscular blocking drug administration; ventilation status; and conditions potentially justifying deep sedation. Predefined sedation-related adverse events were recorded daily. Using an iterative process, algorithms were developed to describe the proportion of care periods with poor limb relaxation, poor ventilator synchronization, unnecessary deep sedation, agitation, and an overall optimum sedation metric. Proportion charts described processes over time (2 monthly intervals) for each ICU. The numbers of patients treated between sedation-related adverse events were described with G charts. Automated algorithms generated charts for 12 months of sequential data. Mean values for each process were calculated, and variation within and between ICUs explored qualitatively. Setting: Eight Scottish ICUs over a 12-month period. Patients: Mechanically ventilated patients. Interventions: None. Measurements and Main Results: The Sedation Quality Assessment Tool agitation-sedation domains correlated with the Richmond Sedation Agitation Scale score (Spearman [rho] = 0.75) and were reliable in clinician-clinician (weighted kappa; [kappa] = 0.66) and clinician-researcher ([kappa] = 0.82) comparisons. The limb movement domain had fair correlation with Behavioral Pain Scale ([rho] = 0.24) and was reliable in clinician-clinician ([kappa] = 0.58) and clinician-researcher ([kappa] = 0.45) comparisons. Ventilator synchronization correlated with Behavioral Pain Scale ([rho] = 0.54), and reliability in clinician-clinician ([kappa] = 0.29) and clinician-researcher ([kappa] = 0.42) comparisons was fair-moderate. Eight hundred twenty-five patients were enrolled (range, 59-235 across ICUs), providing 12,385 care periods for evaluation (range 655-3,481 across ICUs). The mean proportion of care periods with each quality metric varied between ICUs: excessive sedation 12-38%; agitation 4-17%; poor relaxation 13-21%; poor ventilator synchronization 8-17%; and overall optimum sedation 45-70%. Mean adverse event intervals ranged from 1.5 to 10.3 patients treated. The quality measures appeared relatively stable during the observation period. Conclusions: Process control methodology can be used to simultaneously monitor multiple aspects of pain-sedation-agitation management within ICUs. Variation within and between ICUs could be used as triggers to explore practice variation, improve quality, and monitor this over time

Ethylene rapidly up-regulates the activities of both monomeric GTP-binding proteins and protein kinase(s) in epicotyls of pea

Igor E. Moshkov, Galina V. Novikova, Luis A.J. Mur, Aileen R. Smith, and Michael A. Hall. (2003). Ethylene rapidly up-regulates the activities of both monomeric GTP-binding proteins and protein kinase(s) in epicotyls of pea. Plant Physiology, 131(4), 1718-1726 RAE2008

Porównawcza analiza udziału pokrewnych kinaz MAPK (MKK1, MKK2, MKK4 i MKK5) Arabidopsis thaliana w odpowiedzi na stres suszy

Wydział Biologii: Instytut Biologii Molekularnej i Biotechnologii