Redução de aplicações de inseticidas através da adoção de táticas de manejo integrado do Triozoida limbata (Enderlein, 1918) (Hemiptera: triozidae) em goiabeira

The guava tree pest that has been requesting larger control frequency, in the area of Jaboticabal - São Paulo in the last years, is the psilideo Triozoida limbata. Thus, the objectives of this research were: a) Compare control tactics T. limbata based on monitoring and selectivity of insecticide to decrease the applications; b) To register and to correlate the natural enemies in habitants in guava tree ecosystem with the key pest and with meteorological factors; c) See if the control of T. limbata affects the population of fruit flies and d) To verify the efficiency of appropriate insecticides to IMP, in control of T. limbata. The experiment was conducted in 2004, in an orchard of Paluma cultivar in Vista Alegre do Alto, SP. The used strategies were (doses in g.a.i./100L water): control; imidacloprid + beta-cyfluthrin (2.5 + 0.3); acetamiprid (4.0); fenpropathrin (15.0) and regional conventional treatment. It was concluding that is possible to reduce the number of applications of less aggressive insecticides to the environment and the man, with the adoption of monitoring of T. limbata and implementing the action level. The natural enemies' populations densities (Scymnus spp., Cycloneda sanguinea, Azia luteipes, Crysoperla spp., Polybia spp., Brachygastra ssp.) present positive correlations with the populations of T. limbata. Population fluctuations of T. limbata and natural enemies are not altered by meteorological factors (precipitation and temperature) in irrigated orchard. The population of Anastrepha spp. is minimized when of the applications is for control T. limbata. The insecticides imidacloprid, imidacloprid + beta-cyfluthrin, acetamiprid and fenpropathrin are efficient in the control of T. limbata.

Redução de Bactérias Indicadoras de Poluição Fecal em Estrume de Aves de Postura Tratados por Biodigestão Anaeróbia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade de vida de pessoas com úlcera venosa: associação dos aspectos sociodemográficos, de saúde, assistência e clínicos da lesão

Venous ulcer (VU) is a lower limbs injury resulting from inadequate return of venous blood in feet or legs. Although it is not a deadly disease, it causes chronic wounds, which seriously undermine patients´ quality of life (QOL) and sometimes leads to drastic family, social, economic and psychological changes. In this sense, there are several aspects that may influence the venous ulcers patients´ QOL. The study´s objective aimed on the association of socio-demographic and health, health care and clinical injury on UV patients‟ QOL. Analytical studies, which consider the complexity of factors involved in changes in UV patients‟ QOL has a cross-sectional and quantitative approach. The HUOL Ethics Committee approved this project (n.279/09). The collection of data lasted a period of 3 months in 2010 and it took place at the clinic of Angiology at Hospital Universitário Onofre Lopes (HUOL). The data sample consisted of 60 patients treated by UV angiologists in the HUOL Surgical Clinic. The results were analyzed with SPSS 15.0 by descriptive and inferential statistics. The study was based on UV patients that were predominantly female, average age of 61.4 years, that had low education level and low family income, with occupations requiring long periods of standing or sitting, but mostly retired, unemployed or laid off due to the disease and/or due to chronic diseases associated with the UV. The study took also into consideration patients that used inappropriate products, that were improperly treated by a professional caregiver, that lacked of adequate guidance and compression therapy, that performed no lifting of the lower limbs and regular exercise, that the time of injury were greater than or equal to six months, that were missing specific laboratory tests. The study‟s reference were on recurrent lesions, medium to large lesions area, bed of the lesion (injuries) with fibrin and/or necrosis, with amount of exudate with medium to large, odorless and no signs of infection, with tissue loss between 1st and 2nd degree, without collecting swab or biopsy and with pain. In general, QOL of researched individuals were considered low, the maximum score was 69 points, which the areas that were mostly influenced were the total scores of QOL functional capacity (0.021), emotional (0.000) and social functioning (0.080). Of the 60 individuals, 53.3% had scores between 40 and 69 points in SF-36, and they had the best scores in sociodemographic and health variables (ρ = 0.049). In respect to the assistance and injury characteristics, patients who scored between 40 and 69 points in SF-36 had better scores on these characteristics. By combining the socio-demographic variables, health, and handling characteristics of the injury, we observed a significant difference (ρ = 0.032) when linking them with the QOL total scores. When analyzing separately the domains of the SF-36 scores on the quality of life, we find that the areas that showed statistical significance were functional ability (ρ = 0.035), appearance (ρ = 0.019), emotional (ρ = 0.000), and mental health (ρ = 0.050). Among the socio-demographic characteristics studied, gender and marital status contributed more to the reduction of QOL and among the variables of assistance and the injury, orientation, reference and area of UV contributed the most. By analyzing these five variables all together in accordance with the overall score obtained in the quality of life, we found a significant correlation (ρ = 0.002); with 6.23 times more chances of patients have better QOL in the presence of these five positive factors. By conducting the Mann Whitney U test between all the five demographic variables, health, and clinical care, we found that this combination also proved to be significant (ρ = 0.006). Therefore, patients with these five variables positive tend to have a better QOL. Based on these results, we reject the null hypothesis (H0) and accept the alternative hypothesis (H1) proposed in this study because we noted that the QOL of patients with UV is associated with sociodemographic and health, health care and clinical aspects of the injury

Redução de danos e o saber-fazer de profissionais de um CAPS ad em Natal-RN

The present study had as a main objective to analyze how the professionals at a CAPS ad unit in Natal-RN conceive the knowledge-practice process with regard to the Harm Reduction Policy (HRP) towards alcohol and other drugs. For the accomplishment of this proposal, it was intended: 1) Verifying the possibilities and limits of the HRP implementation at a CAPS ad unit in Natal-RN; 2) Relating the professionals knowledge at a CAPS ad unit in Natal in regard to the Harm Reduction Policy; 3) Enumerating the HRP programmatic actions at the institution. The research had exploratory, descriptive and qualitative approach aspects, guided by the concepts of biopower and self care proposed by Michel Foucault. Data collection occurred in June and July 2011, in which the focal group technique was used. After that, collect field material was analyzed through the content analysis method proposed by Minayo. The results showed some conceptual and practical approach between the harm reduction strategy and the knowledge-practice of the professionals at this CAPS ad unit. The discursive models about drug usage, especially the moral-legal model, still have a significant role in the daily lives of these professionals, being amplified by some demands of their jobs or even through the instituted discourse. The individuals recognize the need for less prohibited practices and more socializing ones, identifying them with the Harm Reduction (HR) logic, when there is a coherent and well-founded understanding about HR among the professionals. Distorted and reductionist views about HR as considering the simple instrumental function of this strategy (distribution of basic supplies) among the professionals, represent one of the main barriers for its implementation. There are few programmatic activities that are related to the RD strategy at this CAPS ad unit which makes a more effective appropriation by the working team difficult to reach. The working processes and the postures adopted by this CAP ad unit professionals have been showing that many of their practices and conceptions were modified to the detriment of new necessities emerged from the demands. Consequently, the self care notion is revealed which brings the need for the valorization of these care agents roles, that is, their collective and individual contribution.

Acidez do solo e calagem em pomares de frutíferas tropicais

A produtividade agrícola nos trópicos é afetada, principalmente, pelos fatores ligados à acidez do solo (pH, saturação por bases, acidez potencial, disponibilidade de nutrientes). A calagem é uma prática bem conhecida para corrigir a acidez do solo em culturas anuais, ainda que não seja praticada com a regularidade necessária. Entretanto, em culturas perenes, a incorporação de corretivos é mais complexa, devido às características desse grupo de plantas e à carência de informações científicas sobre o assunto. em condições de acidez, a calagem promove a neutralização do Al3+, a elevação do pH e o fornecimento de Ca e Mg, possibilitando a proliferação de raízes, com reflexos positivos no crescimento da parte aérea das plantas. Contudo, devido à baixa solubilidade e à lenta movimentação do calcário ao longo do perfil do solo, há obrigatoriedade de se fazer distribuição uniforme e incorporação profunda, antecedendo a implantação do pomar, a fim de garantir o eficiente aproveitamento de água e de nutrientes contidos nessas camadas. A calagem deve ser considerada um investimento, pois seus benefícios perduram além de um ano ou de uma safra agrícola. Isso se deve ao efeito residual dos corretivos de acidez do solo, sendo o tempo de duração desse efeito dependente de vários fatores, entre os quais: condições edafoclimáticas, cultura, manejo da área e tipo de corretivo empregado. em geral, partículas maiores de calcário têm efeito residual mais prolongado, sendo empregadas na implantação dos pomares. No entanto, a relação entre o tamanho da partícula e o efeito residual tem sido pouco pesquisada, devido à necessidade de estudos de longa duração. em função das elevadas doses de adubos nitrogenados utilizadas nos pomares de altos rendimentos, a acidez do solo aumenta, como resultado do processo de nitrificação. em pomares já implantados, o procedimento atualmente utilizado pelos produtores é a incorporação superficial do calcário na área. As recomendações talvez fossem outras, caso houvesse maior subsídio da pesquisa, tendo em vista os diversos problemas fitossanitários que podem ocorrer, direta ou indiretamente da prática da incorporação do corretivo, tais como redução do sistema radicular, ferimento das raízes e consequente risco de infecções, com disseminação de pragas e doenças no pomar. O objetivo desta revisão é apresentar os principais resultados de pesquisas sobre o assunto, mostrando os efeitos da calagem sobre a fertilidade do solo, a nutrição e a produtividade de frutíferas de grande importância econômica para o Brasil, bem como discutir a duração do efeito residual dos corretivos e a dose mais ecônomica a ser aplicada nos pomares de frutas em implantação e em produção.

Redução do nível protéico da dieta, através da formulação baseada em aminoácidos digestíveis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Elaboração de um plano de gerenciamento integrado de resíduos sólidos no restaurante universitário da Universidade Federal do Rio Grande do Norte

The concern about preservation of the environment reaches different layers and sections of global society. The environmental prior quality of our planet can only be reached through changes in the attitudes taken in relation due to the waste generated by society, this also lead involving the education sector, in example of the Superior Education Institutions where the concept of ambiental management needs to gain a growing space.In the Federal University of Rio Grande do Norte, can be found the Universitary Restaurant as an example of a Food and Nutrition Unit, it is a restaurant destined to provide services to the academic comunity with the production and distribution of meals. In this operational context the work itself aims subsidies and funds to the search of as minimal generation of residues as possible, applying environmentally correct processes and practices. The work was developed in the period of September to October of 2009 in the Universitary Campus of Federal University of Rio Grande do Norte, in the Universitary Restaurant of the referred institution. The project involved all the employees of the restaurant and used like method the action survey. The produced waste was characterized, arranged according with it s nature (organic or inorganic) classificated following the NBR ISO 14004, adapted by Kinasz (2004) that adjusts the Standards to the specific reality of Food and Nutrition Services being diagnosed an expressive amount of produced waste in the Universitary Restaurant, it can be assured that a culture of wasting is very present and exists, contributing to the rise of solid residues, damaging the environment and consequently reflecting in the costs and expenses of the Unity, a known fact that characterizes and justifies the need of a promoting and active action that leads to positive reflexes in the economic and environmental area, drafting a Plan for Integrate Management of Solid Residues on the Universitary Restaurant of Federal University of Rio Grande do Norte

Implantação de um sistema de detecção de vazamentos em oleodutos com tratamento de alarmes falsos

The pumping of fluids in pipelines is the most economic and safe form of transporting fluids. That explains why in Europe there was in 1999 about 30.000 Km [7] of pipelines of several diameters, transporting millíons of cubic meters of crude oil end refined products, belonging to COCAWE (assaciation of companies of petroleum of Europe for health, environment and safety, that joint several petroleum companies). In Brazil they are about 18.000 Km of pipelines transporting millions of cubic meters of liquids and gases. In 1999, nine accidents were registered to COCAWE. Among those accidents one brought a fatal victim. The oil loss was of 171 m3, equivalent to O,2 parts per million of the total of the transported volume. Same considering the facts mentioned the costs involved in ao accident can be high. An accident of great proportions can bríng loss of human lives, severe environmental darnages, loss of drained product, loss . for dismissed profit and damages to the image of the company high recovery cost. In consonance with that and in some cases for legal demands, the companies are, more and more, investing in systems of Leak detection in pipelines based on computer algorithm that operate in real time, seeking wíth that to minimize still more the drained volumes. This decreases the impacts at the environment and the costs. In general way, all the systems based on softWare present some type of false alarm. In general a commitment exists betWeen the sensibílity of the system and the number of false alarms. This work has as objective make a review of thé existent methods and to concentrate in the analysis of a specific system, that is, the system based on hydraulic noise, Pressure Point Analyzis (PPA). We will show which are the most important aspects that must be considered in the implementation of a Leak Detection System (LDS), from the initial phase of the analysis of risks passing by the project bases, design, choice of the necessary field instrumentation to several LDS, implementation and tests. We Will make na analysis of events (noises) originating from the flow system that can be generator of false alarms and we will present a computer algorithm that restricts those noises automatically

Multi-resolução com fóvea móvel para redução e abstração de dados em tempo real

We propose a new approach to reduction and abstraction of visual information for robotics vision applications. Basically, we propose to use a multi-resolution representation in combination with a moving fovea for reducing the amount of information from an image. We introduce the mathematical formalization of the moving fovea approach and mapping functions that help to use this model. Two indexes (resolution and cost) are proposed that can be useful to choose the proposed model variables. With this new theoretical approach, it is possible to apply several filters, to calculate disparity and to obtain motion analysis in real time (less than 33ms to process an image pair at a notebook AMD Turion Dual Core 2GHz). As the main result, most of time, the moving fovea allows the robot not to perform physical motion of its robotics devices to keep a possible region of interest visible in both images. We validate the proposed model with experimental results

Uma metodologia para redução de incertezas em sistema de medição de vazão de óleo e gás

The objective of this research is to discuss about the need for implementation of new alternatives for the implementation on the metrological control: on the findings of initial and subsequent measurements, the control procedures of measurement uncertainty applied in assessing the loss or remains found in handling operations of bulk liquids, when used turbine meters used in measuring the tax on the business of Petrobras, due to the current environment of legal metrology and scientific, both domestic and international. We aim, with these alternatives: standardizing the minimization of random and systematic errors, the estimate of the remaining errors, as well as the management control of metrological calibration procedures, control of measurement uncertainty, and contribute to the change in the form of performance of legal metrology and scientific disseminating new information to change management of metrological control, objectively focused on aspects of supervision in implementing these activities in the control of the uncertainties of measurement used in our processes in the fiscal measurement system Petrobras. Results are presented, information and comments on the influence of measurement uncertainty in the current results of the fiscal and transfer of custody. This will emphasize the need, among other things, improvement and expansion of metrological control monitored by setting a better meet demand, calibration equipment and measuring instruments for Petrobras. Finally, we intend to establish the need for improving the method of evaluation of the data meter applied to the current management control of measurement uncertainty by proposing a methodology for addressing the problem, as well as highlighting the expected results.

Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro

This work presents the results, analyses and conclusions about a study carried out with objective of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting tool, causing frequent stresses changes in its superficial and sub-superficial layers. These characteristics cause the formation of perpendicular cracks from cutting edge which aid the cutting tool wear, reducing its life. Several works on this subject emphasizing the thermal cyclic behavior imposed by the milling process as the main responsible for thermal cracks formation have been published. In these cases, the phenomenon appears as a consequence of the difference in temperature experienced by the cutting tool with each rotation of the cutter, usually defined as the difference between the temperatures in the cutting tool wedge at the end of the cutting and idle periods (T factor). Thus, a technique to minimize this cyclic behavior with objective of transforming the milling in an almost-continuous process in terms of temperature was proposed. In this case, a hot air stream was applied into the idle period, during the machining process. This procedure aimed to minimize the T factor. This technique was applied using three values of temperature from the hot air stream (100, 350 e 580 oC) with no cutting fluid (dry condition) and with cutting fluid mist (wet condition) using the hot air stream at 580oC. Besides, trials at room temperature were carried out. Afterwards the inserts were analyzed using a scanning electron microscope, where the quantity of thermal cracks generated in each condition, the wear and others damages was analyzed. In a general way, it was found that the heating of the idle period was positive for reducing the number of thermal cracks during face milling with cemented carbide inserts. Further, the cutting fluid mist application was effective in reducing the wear of the cutting tools.

Obtenção de pós de Nb a partir da redução aluminotérmica com ignição por plasma

The aluminothermic reduction consists in an exothermic reaction between a metallic oxide and aluminum to produce the metal and the scum. The extracted melted metal of that reaction usually comes mixed with particles of Al2O3 resulting of the reduction, needing of subsequent refine to eliminate the residual impure as well as to eliminate porosities. Seeking to obtain a product in powder form with nanometric size or even submicrometric, the conventional heat source of the reaction aluminothermic , where a resistor is used (ignitor) as ignition source was substituted, for the plasma, that acts more efficient way in each particle of the sample. In that work it was used as metallic oxide the niobium pentoxide (Nb2O5) for the exothermal reaction Nb2O5 + Al. Amounts stoichiometric, substoichiometric and superestoichiometric of aluminum were used. The Nb2O5 powder was mixed with aluminum powder and milled in planetarium of high energy for a period of 6 hours. Those powders were immerged in plasm that acts in a punctual way in each particle, transfering heat, so that the reaction can be initiate and spread integrally for the whole volume of the particle. The mixture of Nb2O5 + Al was characterized through the particle size analysis by laser and X-ray diffraction (DRX) and the obtained product of reaction was characterized using the electronic microscopy of sweeping (MEV) and the formed phases were analyzed by DRX. Niobium powders with inferior sizes to 1 mm were obtained by that method. It is noticed, through the analysis of the obtained results, that is possible to accomplish the aluminothermic reduction process by plasma ignition with final particles with inferior sizes to the original oxide

Redução carbotérmica de TiO2 por descarga em cátodo oco

In this study we used the plasma as a source of energy in the process of carbothermic reduction of rutile ore (TiO2). The rutile and graphite powders were milled for 15 h and placed in a hollow cathode discharge produced by in order to obtain titanium carbonitride directly from the reaction, was verified the influence of processing parameters of plasma temperature and time in the synthesis of TiCN. The reaction was carried out at 600, 700 and 800˚C for 3 to 4 hours in an atmosphere of nitrogen and argon. During all reactions was monitored by plasma technique of optical emission spectroscopy (EEO) to check the active species present in the process of carbothermal reduction of TiO2. The powder obtained after the reactions were characterized by the techniques of X-ray diffraction (XRD) and scanning electron microscopy (SEM). The technique of EEO were detected in all reactions the spectra CO and NO, and these gas-phase resulting from the reduction of TiO2. The results of X-ray diffraction confirmed the reduction, where for all conditions studied there was evidence of early reduction of TiO2 through the emergence of intermediate oxides. In the samples reduced at 600 and 700˚C, there was only the phase Ti6O11, those reduced to 800˚C appeared Ti5O9 phases, and Ti6O11 Ti7O13, confirming that the carbothermal reduction in plasma, a reduction of the ore rutile (TiO2) in a series of intermediate titanium oxide (TinO2n-1) where n varies between 5 and 10

Avaliação da deposição da calda de pulverização em função da densidade populacional de Brachiaria plantaginea, do volume e do ângulo de aplicação

O presente trabalho teve por objetivo avaliar a quantidade de calda de pulverização depositada nas folhas de Brachiaria plantaginea, em aplicações de pós-emergência precoce, em que se variou o volume de calda de pulverização, a densidade de plantas m-2 e o ângulo de posicionamento da ponta de pulverização na barra de aplicação. Para isso, foram conduzidos três experimentos em condições de laboratório. Nestes estudos, o volume de calda de pulverização foi obtido por meio da variação da velocidade de deslocamento de um veículo composto por plataforma e quatro rolamentos tracionados por um motor elétrico. Foi utilizada a ponta de pulverização XR Teejet 8001 EVS, na pressão de 241,4 kPa. O delineamento experimental utilizado foi o inteiramente casualizado, com cinco repetições. No primeiro experimento, os volumes utilizados foram de 1147,57; 860,68; 573,78; 459,02; 344,27; 229,51; 114,75; e 57,37 L ha-1 de calda de pulverização, com densidade de 600 plantas m-2. No segundo experimento foram estudadas as densidades de 300, 600, 900 e 1.200 plantas m-2; neste caso, utilizou-se o volume de 229,51 L ha-1 de calda de pulverização. No terceiro experimento avaliou-se o posicionamento do ângulo da ponta de pulverização na barra de aplicação e utilizou-se a densidade de 600 plantas m-2. Estudaram-se os ângulos de -30º, -15º, 90º, +15º e +30º e os volumes de calda de pulverização de 198,76; 221,69; 229,51; 221,69; e 198,76 L ha-1, respectivamente. Foram adotados sinais negativos para o sentido de deslocamento do veículo e sinais positivos para o sentido contrário ao deslocamento. As avaliações do depósito de calda de pulverização, na planta e no solo, foram feitas utilizando-se condutividade elétrica. A porcentagem de depósito de calda de pulverização nas plantas de B. plantaginea foi incrementada com a redução do volume de calda pulverizada por hectare. O depósito de calda por planta foi maior nas densidades maiores de plantas. O ângulo de posicionamento da ponta de pulverização na barra de aplicação incrementou o depósito de calda nas plantas de B. plantaginea, quando comparado com o ângulo de 90º.

Eficiência da seleção recorrente para redução da estatura de plantas em mamoneira (Ricinus communis L.)

Realizou-se, o presente trabalho, com o objetivo de avaliar a eficiência da seleção recorrente para a redução da estatura de plantas de mamona da cultivar Guarani (Ricinus communis L.), tornando-a com porte adequado para facilitar a colheita manual e/ou mecânica. Foram realizados quatro ciclos de seleção recorrente com a utilização de progênies autofecundadas na cultivar Guarani para redução da estatura das plantas, nas condições edafoclimáticas dos municípios de São Manuel - SP, Botucatu - SP e Penápolis - SP. As avaliações de estatura das plantas e de produtividade de grãos (kg.ha-1), dos quatro ciclos de seleção e do ciclo original foram realizadas nos municípios de São Manuel - SP, Botucatu - SP e Penápolis - SP na safra 2005/2006, sob um delineamento de blocos casualizados com cinco repetições e parcela útil de 30 m². A análise de variância para as características avaliadas foi feita separadamente para cada local e conjuntamente para os três locais e, posteriormente, realizada a comparação das médias pelo teste de Tukey, a 5%. Foram estimados, para as três localidades, por análise de regressão, os ganhos genéticos dos quatros ciclos de seleção para estatura de plantas. A partir dos resultados obtidos pôde-se concluir que a seleção recorrente foi eficiente para a redução da estatura de plantas e que a cultivar de mamona Guarani apresenta variabilidade genética para essa característica e que a produtividade não foi influenciada pela redução da estatura de plantas.