Is maternal separation anxiety associated with school readiness?

Background. Increasing rates of maternal employment highlight the need for non-maternal child care for infants at an earlier age. Several studies have shown that employment induced maternal depression or psychological distress is associated with the child's socio-emotional and cognitive development. However, separation anxiety, a common phenomenon observed among employed mothers during early years, has seldom been studied. Therefore, the purpose of this study was to evaluate the role of maternal separation anxiety in the child's cognitive development.^ Methods. Data were obtained from Phase I (birth to 36 months) of the National Institute of Child Health and Human Development, Study of Early Child Care and Youth Development (NICHD SECCYD). Bivariate and multivariate analyses were performed to determine the association between separation anxiety groups and child outcomes. Multivariate analysis was also used to examine the mediating and/or moderating effect of sensitivity and moderating effect of difficult temperament.^ Results. Separation anxiety showed a negative association with the Bracken, attachment security, maternal sensitivity and psychological state. Children whose mothers never reported high levels of separation anxiety showed higher levels of school readiness and attachment security compared to those whose mothers experienced high levels of separation anxiety at least once. There was a significant interaction between separation anxiety and maternal sensitivity for the Bracken and attachment security indicating the moderating effect of sensitivity. Maternal sensitivity was also found to partially mediate the association between high levels of separation anxiety and school readiness or attachment security. However, the interaction between difficult temperament and separation anxiety was not significant for any of the child outcomes. ^ Conclusions. High levels of separation anxiety have a negative impact on school readiness, attachment security, maternal sensitivity and psychological state. In addition, mothers who experience high levels of separation anxiety but are sensitive during the mother-child interaction have children with high school readiness and attachment security compared to those who are less sensitive.^ Keywords. Maternal separation anxiety, School readiness. ^

Get ur 60: A social marketing campaign to promote and facilitate physical activity among Central Texas middle school students

If allowed to continue unabated, the obesity epidemic may lead to the first decline in life expectancy in the developed world (Olshansky et al., 2005). Similar to the relationship between smoking habits in youth and adulthood, obesogenic dietary and physical activity habits in childhood may persist into adulthood (Kelder et al., 2002). Teaching children how to establish healthy eating habits and activity levels, as well as providing them the necessary resources to internalize and maintain these behaviors, may be the key to curbing this epidemic.^ A school-based obesity prevention approach is advantageous for many reasons including exposure to large captive audiences, reduced costs of sustainability and long-term maintenance, and generalizability of models and results across multiple populations. The effectiveness of school-based programs has been researched over the past 20 years, with promising results.^ Social marketing is a program-planning process that “facilitates the acceptance, rejection, modification, abandonment, or maintenance of particular behaviors” (Grier & Bryant, 2005). Social marketing has been shown to be effective in a variety of public health applications including improving diet, increasing physical activity, and preventing substance abuse. It is hypothesized that social marketing could further enhance the effectiveness of the Coordinated Approach To Child Health (CATCH) Central Texas Middle School Project, a school-based obesity prevention program.^ The development, implementation, and initial evaluation of the get ur 60 campaign, to promote the Center for Disease Control and Prevention (CDC) recommended sixty minutes of daily activity, is described in this paper. Various components of the get ur 60 campaign were assessed to evaluate the effectiveness of the campaign during the first semester of implementation. At the end of the spring semester focus groups were held to collect student reactions to the first semester of the get ur 60 campaign.^ The initial results from the first semester of get ur 60 have demonstrated that the campaign as designed was feasible to implement, accepted at all intervention schools, and resulted in a measure of success. ^

A descriptive study of the sociodemographic, health and developmental factors associated with slow learning in children from upper to middle social class families in Texas

"Slow Learners" is a term used to describe children with an IQ range of 70-89 on a standardized individual intelligence test (i.e. with a standard deviation of either 15 or 16). They have above retarded, but below average intelligence and potential to learn. If the factors associated with the etiology of slow learning in children can be identified, it may be possible to hypothesize causal relationships which can be tested by intervention studies specifically designed to prevent slow learning. If effective, these may ultimately reduce the incidence of school dropouts and their cost to society. To date, there is little information about variables which may be etiologically significant. In an attempt to identify such etiologic factors this study examines the sociodemographic characteristics, prenatal history (hypertension, smoking, infections, medication, vaginal bleeding, etc.), natal history (length of delivery, Apgar score, birth trauma, resuscitation, etc.), neonatal history (infections, seizures, head trauma, etc.), developmental history (health problems, developmental milestones and growth during infancy and early childhood), and family history (educational level of the parents, occupation, history of similar condition in the family, etc.) of a series of children defined as slow learners. The study is limited to children from middle to high socioeconomic families in order to exclude the possible confounding variable of low socioeconomic status, and because a descriptive study of this group has not been previously reported. ^

OUT-OF-HOSPITAL CHILDBEARING CENTERS IN THE UNITED STATES: A DESCRIPTIVE STUDY OF THE DEMOGRAPHIC AND MEDICAL-OBSTETRIC CHARACTERISTICS OF WOMEN BEGINNING LABOR THEREIN 1972-1979

There is currently much interest in the appropriate use of obstetrical technology, cost containment and meeting consumers' needs for safe and satisfying maternity care. At the same time, there has been an increase in professionally unattended home births. In response, a new type of service, the out-of-hospital childbearing center (CBC) has been developed which is administratively and structurally separate from the hospital. In the CBC, maternity care is provided by certified nurse-midwives to carefully screened low risk childbearing families in conjunction with physician and hospital back-up.^ It was the purpose of this study to accomplish the following objectives: (1) To describe in a historical prospective study the demographic and medical-obstetric characteristics of patients laboring in eleven selected out-of-hospital childbearing centers in the United States from May 1, 1972, to December 15, 1979. Labor is defined as the onset of regular contractions as determined by the patient. (2) To describe any differences between those patients who require transfer to a back-up hospital and those who do not. (3) To describe administrative and service characteristics of eleven selected out-of-hospital childbearing centers in the United States. (4) To compare the demographic and medical-obstetric characteristics of women laboring in eleven selected out-of-hospital childbearing centers with a national sample of women of similar obstetric risk who according to birth certificates delivered legitimate infants in a hospital setting in the United States in 1972.^ Research concerning CBCs and supportive to the development of CBCs including studies which identified factors associated with fetal and perinatal morbidity and mortality, obstetrical risk screening, and the progress of technological development in obstetrics were reviewed. Information concerning the organization and delivery of care at each selected CBC was also collected and analyzed.^ A stratified, systematic sample of 1938 low risk women who began labor in a selected CBC were included in the study. These women were not unlike those described previously in small single center studies reported in the literature. The mean age was 25 years. Sixty-three per cent were white, 34 per cent Hispanic, 88 per cent married, 45 per cent had completed at least two years of college, nearly one-third were professionals and over a third were housewives. . . . (Author's abstract exceeds stipulated maximum length. Discontinued here with permission of school.) UMI ^

SOCIO-ENVIRONMENTAL FACTORS ASSOCIATED WITH THE DISTRIBUTION OF DRACUNCULUS MEDINENSIS (GUINEA WORM DISEASE) AND SUGGESTED METHODS FOR CONTROL, IBARAPA, NIGERIA, 1982 (AFRICA)

A population-based cross-sectional survey of socio-environmental factors associated with the prevalence of Dracunculus medinensis (guinea worm disease) was conducted in Idere, a rural agricultural community in Ibarapa, Oyo state, Nigeria, during 1982.^ The epidemiologic data were collected by household interview of all 501 households. The environmental data were collected by analysis of water samples collected from all domestic water sources and rainfall records.^ The specific objectives of this research were to: (a) Describe the prevalence of guinea worm disease in Idere during 1982 by age, sex, area of residence, drinking water source, religion and weekly amount of money spent by the household to collect potable drinking water. (b) Compare the characteristics of cases with non-cases of guinea worm in order to identify factors associated with high risk of infection. (c) Investigate domestic water sources for the distribution of Cyclops. (d) Determine the extent of potable water shortage with a view to identifying factors responsible for such shortage in the community. (e) Describe the effects of guinea worm on school attendance during 1980/1982 school years by class and location of school from piped water supply.^ The findings of this research indicate that during 1982, 31.8 percent of Idere's 6,527 residents experienced guinea worm infection, with higher prevalence of infection recorded in males in their most productive years and females in their teenage years. The role of sex and age to risk of higher infection rate was explained in the context of water related exposure and water intake due to dehydration from physical occupational actitives of subgroups.^ Potable water available to residents was considerably below the minimum recommended by WHO for tropical climates, with sixty-eight percent of water needs of the residents coming from unprotected surface water which harbour Cyclops, the obligatory intermediate host of Dracunculus medinensis. An association was found between periods of relative high density of Cyclops in domestic water and rainfall.^ Impact of guinea worm infection on educational activities was considerable and its implications were discussed, including the implications of the research findings in relation to control of guinea worm disease in Ibarapa. ^

Expanding Learning Time in Schools: Considering the Challenges of Implementation and the Potential Impact

Considering the broader context of school reform that is seeking education strategies that might deliver substantial impact, this article examines four questions related to the policy and practice of expanding learning time: (a) why do educators find the standard American school calendar insufficient to meet students’ educational needs, especially those of disadvantaged students? (b) how do educators implement a longer day and/or year, addressing concerns about both educational quality and costs? (c) what does research report about outcomes of expanding time in schools? and (d) what are the future prospects for increasing the number of expanded-time schools? The paper examines these questions by considering research, policy, and practice at the national level and, throughout, by drawing upon additional evidence from Massachusetts, one of the leading states in the expanded-time movement. In considering the latter two questions, the article explores the knowns and unknowns related to expanded learning time and offers suggestions for further research.

School counsellor's roles in minimising adolescents' attrition from schools

Counselling ways (rendering financial advice, providing encouragement, reassurances and support), which the school counselllors could adopt to help the school system minimize the increasing incidence of school dropout, were advanced.

School counsellor's roles in minimising adolescents' attrition from schools

Counselling ways (rendering financial advice, providing encouragement, reassurances and support), which the school counselllors could adopt to help the school system minimize the increasing incidence of school dropout, were advanced.

School counsellor's roles in minimising adolescents' attrition from schools

Counselling ways (rendering financial advice, providing encouragement, reassurances and support), which the school counselllors could adopt to help the school system minimize the increasing incidence of school dropout, were advanced.

Survey of living conditions of Arctic indigenous peoples

Major findings of the Survey of Living Conditions in the Arctic (SLiCA) are: (1) A combination of traditional activities and cash employment is the prevailing lifestyle of Arctic indigenous peoples; (2) family ties, social support of each other, and traditional activities have a lot to do with why indigenous people choose to remain in Arctic communities; (3) well-being is closely related to job opportunities, locally available fish and game, and a sense of local control. Well-being and depression (and related problems like suicide) are flip sides of the same coin. Improving well-being may reduce social problems; and, (4) health conditions vary widely in the Arctic: three-in-four Greenlandic Inuit self-rate their health as at least very good compared with one-in-two Canadian and Alaska Inuit and one-in-five Chukotka indigenous people. Findings are based on 7,200 interviews in a probability sample of Inupiat settlement regions of Alaska, the four Inuit settlement regions of Canada, all of Greenland, and the Anadyrskij, Anadyr, Shmidtovs, Beringovskij, Chukotskij, Iujl'tinskij, Bilibinskij, Chaunskij, Providenskij, Uel'Kal' districts of Chukotka. Indigenous people and researchers from Greenland, Russia, Canada, the United States, Denmark, Norway, Sweden, and Finland collaborated on all phases of the study.

Strontium isotope ratios of planktonic foraminifera from sediment samples acroos the K/T boundary

Seawater 87Sr/86Sr values increase abruptly by 28 * 10**-6 across the Cretaceous/Tertiary boundary (KTB). This small, but rapid shift is superimposed on the larger scale structure of the seawater Sr isotope curve. The time scale of radiogenic Sr addition appears to be too rapid to reconcile with sources associated with volcanism, and we show that the amount of Sr required to produce even this small increase is too large to be derived from: (1) a KT bolide of the size constrained by the Ir anomaly, (2) continental crust ejecta from the impact of such a bolide, (3) soot from global wildfires initiated by an impact, or (4) any combination of these sources. The probable source of the radiogenic Sr is enhanced continental weathering, but the high rate of increase appears to rule out processes such as sea level regression, glaciation or tectonism. A plausible mechanism for rapid addition of radiogenic Sr to the oceans is enhanced weathering associated with globally distributed acid rain (pH c. 1) which is a proposed by-product of a bolide impact (Prinn and Fegley, 1987, doi:10.1016/0012-821X(87)90046-X).

SOPHIA CPV module round robin: power rating at CSOC

In the frame of the European project SOPHIA a concentrator photovoltaic (CPV) module measurement round robin has been initiated. The round robin includes measurements of four CPV modules at seven different test laboratories located in Europe. IV curves of the modules are measured with different measurement equipment under various climatic conditions. The aim of this activity is to perform at each site a rating of the modules at concentrator standard operating conditions CSOC according to IEC 62670-1. The outcome of the round robin is intended for direct feedback to the current draft standard IEC 62670-3 “Concentrator Photovoltaic (CPV) Performance Testing - Performance Measurements and Power Rating”. The paper discusses initial results from the first three partners that have already finished the measurements up to now.

Método experimental para la caracterización de las diferentes tecnologías de integración arquitectónica de la energía fotovoltaica en condiciones de funcionamiento real = Experimental method for characterization of several building integrated photovoltaic technologies under real working conditions

Hoy en día, el proceso de un proyecto sostenible persigue realizar edificios de elevadas prestaciones que son, energéticamente eficientes, saludables y económicamente viables utilizando sabiamente recursos renovables para minimizar el impacto sobre el medio ambiente reduciendo, en lo posible, la demanda de energía, lo que se ha convertido, en la última década, en una prioridad. La Directiva 2002/91/CE "Eficiencia Energética de los Edificios" (y actualizaciones posteriores) ha establecido el marco regulatorio general para el cálculo de los requerimientos energéticos mínimos. Desde esa fecha, el objetivo de cumplir con las nuevas directivas y protocolos ha conducido las políticas energéticas de los distintos países en la misma dirección, centrándose en la necesidad de aumentar la eficiencia energética en los edificios, la adopción de medidas para reducir el consumo, y el fomento de la generación de energía a través de fuentes renovables. Los edificios de energía nula o casi nula (ZEB, Zero Energy Buildings ó NZEB, Net Zero Energy Buildings) deberán convertirse en un estándar de la construcción en Europa y con el fin de equilibrar el consumo de energía, además de reducirlo al mínimo, los edificios necesariamente deberán ser autoproductores de energía. Por esta razón, la envolvente del edifico y en particular las fachadas son importantes para el logro de estos objetivos y la tecnología fotovoltaica puede tener un papel preponderante en este reto. Para promover el uso de la tecnología fotovoltaica, diferentes programas de investigación internacionales fomentan y apoyan soluciones para favorecer la integración completa de éstos sistemas como elementos arquitectónicos y constructivos, los sistemas BIPV (Building Integrated Photovoltaic), sobre todo considerando el próximo futuro hacia edificios NZEB. Se ha constatado en este estudio que todavía hay una falta de información útil disponible sobre los sistemas BIPV, a pesar de que el mercado ofrece una interesante gama de soluciones, en algunos aspectos comparables a los sistemas tradicionales de construcción. Pero por el momento, la falta estandarización y de una regulación armonizada, además de la falta de información en las hojas de datos técnicos (todavía no comparables con las mismas que están disponibles para los materiales de construcción), hacen difícil evaluar adecuadamente la conveniencia y factibilidad de utilizar los componentes BIPV como parte integrante de la envolvente del edificio. Organizaciones internacionales están trabajando para establecer las normas adecuadas y procedimientos de prueba y ensayo para comprobar la seguridad, viabilidad y fiabilidad estos sistemas. Sin embargo, hoy en día, no hay reglas específicas para la evaluación y caracterización completa de un componente fotovoltaico de integración arquitectónica de acuerdo con el Reglamento Europeo de Productos de la Construcción, CPR 305/2011. Los productos BIPV, como elementos de construcción, deben cumplir con diferentes aspectos prácticos como resistencia mecánica y la estabilidad; integridad estructural; seguridad de utilización; protección contra el clima (lluvia, nieve, viento, granizo), el fuego y el ruido, aspectos que se han convertido en requisitos esenciales, en la perspectiva de obtener productos ambientalmente sostenibles, saludables, eficientes energéticamente y económicamente asequibles. Por lo tanto, el módulo / sistema BIPV se convierte en una parte multifuncional del edificio no sólo para ser física y técnicamente "integrado", además de ser una oportunidad innovadora del diseño. Las normas IEC, de uso común en Europa para certificar módulos fotovoltaicos -IEC 61215 e IEC 61646 cualificación de diseño y homologación del tipo para módulos fotovoltaicos de uso terrestre, respectivamente para módulos fotovoltaicos de silicio cristalino y de lámina delgada- atestan únicamente la potencia del módulo fotovoltaico y dan fe de su fiabilidad por un período de tiempo definido, certificando una disminución de potencia dentro de unos límites. Existe también un estándar, en parte en desarrollo, el IEC 61853 (“Ensayos de rendimiento de módulos fotovoltaicos y evaluación energética") cuyo objetivo es la búsqueda de procedimientos y metodologías de prueba apropiados para calcular el rendimiento energético de los módulos fotovoltaicos en diferentes condiciones climáticas. Sin embargo, no existen ensayos normalizados en las condiciones específicas de la instalación (p. ej. sistemas BIPV de fachada). Eso significa que es imposible conocer las efectivas prestaciones de estos sistemas y las condiciones ambientales que se generan en el interior del edificio. La potencia nominal de pico Wp, de un módulo fotovoltaico identifica la máxima potencia eléctrica que éste puede generar bajo condiciones estándares de medida (STC: irradición 1000 W/m2, 25 °C de temperatura del módulo y distribución espectral, AM 1,5) caracterizando eléctricamente el módulo PV en condiciones específicas con el fin de poder comparar los diferentes módulos y tecnologías. El vatio pico (Wp por su abreviatura en inglés) es la medida de la potencia nominal del módulo PV y no es suficiente para evaluar el comportamiento y producción del panel en términos de vatios hora en las diferentes condiciones de operación, y tampoco permite predecir con convicción la eficiencia y el comportamiento energético de un determinado módulo en condiciones ambientales y de instalación reales. Un adecuado elemento de integración arquitectónica de fachada, por ejemplo, debería tener en cuenta propiedades térmicas y de aislamiento, factores como la transparencia para permitir ganancias solares o un buen control solar si es necesario, aspectos vinculados y dependientes en gran medida de las condiciones climáticas y del nivel de confort requerido en el edificio, lo que implica una necesidad de adaptación a cada contexto específico para obtener el mejor resultado. Sin embargo, la influencia en condiciones reales de operación de las diferentes soluciones fotovoltaicas de integración, en el consumo de energía del edificio no es fácil de evaluar. Los aspectos térmicos del interior del ambiente o de iluminación, al utilizar módulos BIPV semitransparentes por ejemplo, son aún desconocidos. Como se dijo antes, la utilización de componentes de integración arquitectónica fotovoltaicos y el uso de energía renovable ya es un hecho para producir energía limpia, pero también sería importante conocer su posible contribución para mejorar el confort y la salud de los ocupantes del edificio. Aspectos como el confort, la protección o transmisión de luz natural, el aislamiento térmico, el consumo energético o la generación de energía son aspectos que suelen considerarse independientemente, mientras que todos juntos contribuyen, sin embargo, al balance energético global del edificio. Además, la necesidad de dar prioridad a una orientación determinada del edificio, para alcanzar el mayor beneficio de la producción de energía eléctrica o térmica, en el caso de sistemas activos y pasivos, respectivamente, podría hacer estos últimos incompatibles, pero no necesariamente. Se necesita un enfoque holístico que permita arquitectos e ingenieros implementar sistemas tecnológicos que trabajen en sinergia. Se ha planteado por ello un nuevo concepto: "C-BIPV, elemento fotovoltaico consciente integrado", esto significa necesariamente conocer los efectos positivos o negativos (en términos de confort y de energía) en condiciones reales de funcionamiento e instalación. Propósito de la tesis, método y resultados Los sistemas fotovoltaicos integrados en fachada son a menudo soluciones de vidrio fácilmente integrables, ya que por lo general están hechos a medida. Estos componentes BIPV semitransparentes, integrados en el cerramiento proporcionan iluminación natural y también sombra, lo que evita el sobrecalentamiento en los momentos de excesivo calor, aunque como componente estático, asimismo evitan las posibles contribuciones pasivas de ganancias solares en los meses fríos. Además, la temperatura del módulo varía considerablemente en ciertas circunstancias influenciada por la tecnología fotovoltaica instalada, la radiación solar, el sistema de montaje, la tipología de instalación, falta de ventilación, etc. Este factor, puede suponer un aumento adicional de la carga térmica en el edificio, altamente variable y difícil de cuantificar. Se necesitan, en relación con esto, más conocimientos sobre el confort ambiental interior en los edificios que utilizan tecnologías fotovoltaicas integradas, para abrir de ese modo, una nueva perspectiva de la investigación. Con este fin, se ha diseñado, proyectado y construido una instalación de pruebas al aire libre, el BIPV Env-lab "BIPV Test Laboratory", para la caracterización integral de los diferentes módulos semitransparentes BIPV. Se han definido también el método y el protocolo de ensayos de caracterización en el contexto de un edificio y en condiciones climáticas y de funcionamiento reales. Esto ha sido posible una vez evaluado el estado de la técnica y la investigación, los aspectos que influyen en la integración arquitectónica y los diferentes tipos de integración, después de haber examinado los métodos de ensayo para los componentes de construcción y fotovoltaicos, en condiciones de operación utilizadas hasta ahora. El laboratorio de pruebas experimentales, que consiste en dos habitaciones idénticas a escala real, 1:1, ha sido equipado con sensores y todos los sistemas de monitorización gracias a los cuales es posible obtener datos fiables para evaluar las prestaciones térmicas, de iluminación y el rendimiento eléctrico de los módulos fotovoltaicos. Este laboratorio permite el estudio de tres diferentes aspectos que influencian el confort y consumo de energía del edificio: el confort térmico, lumínico, y el rendimiento energético global (demanda/producción de energía) de los módulos BIPV. Conociendo el balance de energía para cada tecnología solar fotovoltaica experimentada, es posible determinar cuál funciona mejor en cada caso específico. Se ha propuesto una metodología teórica para la evaluación de estos parámetros, definidos en esta tesis como índices o indicadores que consideran cuestiones relacionados con el bienestar, la energía y el rendimiento energético global de los componentes BIPV. Esta metodología considera y tiene en cuenta las normas reglamentarias y estándares existentes para cada aspecto, relacionándolos entre sí. Diferentes módulos BIPV de doble vidrio aislante, semitransparentes, representativos de diferentes tecnologías fotovoltaicas (tecnología de silicio monocristalino, m-Si; de capa fina en silicio amorfo unión simple, a-Si y de capa fina en diseleniuro de cobre e indio, CIS) fueron seleccionados para llevar a cabo una serie de pruebas experimentales al objeto de demostrar la validez del método de caracterización propuesto. Como resultado final, se ha desarrollado y generado el Diagrama Caracterización Integral DCI, un sistema gráfico y visual para representar los resultados y gestionar la información, una herramienta operativa útil para la toma de decisiones con respecto a las instalaciones fotovoltaicas. Este diagrama muestra todos los conceptos y parámetros estudiados en relación con los demás y ofrece visualmente toda la información cualitativa y cuantitativa sobre la eficiencia energética de los componentes BIPV, por caracterizarlos de manera integral. ABSTRACT A sustainable design process today is intended to produce high-performance buildings that are energy-efficient, healthy and economically feasible, by wisely using renewable resources to minimize the impact on the environment and to reduce, as much as possible, the energy demand. In the last decade, the reduction of energy needs in buildings has become a top priority. The Directive 2002/91/EC “Energy Performance of Buildings” (and its subsequent updates) established a general regulatory framework’s methodology for calculation of minimum energy requirements. Since then, the aim of fulfilling new directives and protocols has led the energy policies in several countries in a similar direction that is, focusing on the need of increasing energy efficiency in buildings, taking measures to reduce energy consumption, and fostering the use of renewable sources. Zero Energy Buildings or Net Zero Energy Buildings will become a standard in the European building industry and in order to balance energy consumption, buildings, in addition to reduce the end-use consumption should necessarily become selfenergy producers. For this reason, the façade system plays an important role for achieving these energy and environmental goals and Photovoltaic can play a leading role in this challenge. To promote the use of photovoltaic technology in buildings, international research programs encourage and support solutions, which favors the complete integration of photovoltaic devices as an architectural element, the so-called BIPV (Building Integrated Photovoltaic), furthermore facing to next future towards net-zero energy buildings. Therefore, the BIPV module/system becomes a multifunctional building layer, not only physically and functionally “integrated” in the building, but also used as an innovative chance for the building envelope design. It has been found in this study that there is still a lack of useful information about BIPV for architects and designers even though the market is providing more and more interesting solutions, sometimes comparable to the existing traditional building systems. However at the moment, the lack of an harmonized regulation and standardization besides to the non-accuracy in the technical BIPV datasheets (not yet comparable with the same ones available for building materials), makes difficult for a designer to properly evaluate the fesibility of this BIPV components when used as a technological system of the building skin. International organizations are working to establish the most suitable standards and test procedures to check the safety, feasibility and reliability of BIPV systems. Anyway, nowadays, there are no specific rules for a complete characterization and evaluation of a BIPV component according to the European Construction Product Regulation, CPR 305/2011. BIPV products, as building components, must comply with different practical aspects such as mechanical resistance and stability; structural integrity; safety in use; protection against weather (rain, snow, wind, hail); fire and noise: aspects that have become essential requirements in the perspective of more and more environmentally sustainable, healthy, energy efficient and economically affordable products. IEC standards, commonly used in Europe to certify PV modules (IEC 61215 and IEC 61646 respectively crystalline and thin-film ‘Terrestrial PV Modules-Design Qualification and Type Approval’), attest the feasibility and reliability of PV modules for a defined period of time with a limited power decrease. There is also a standard (IEC 61853, ‘Performance Testing and Energy Rating of Terrestrial PV Modules’) still under preparation, whose aim is finding appropriate test procedures and methodologies to calculate the energy yield of PV modules under different climate conditions. Furthermore, the lack of tests in specific conditions of installation (e.g. façade BIPV devices) means that it is difficult knowing the exact effective performance of these systems and the environmental conditions in which the building will operate. The nominal PV power at Standard Test Conditions, STC (1.000 W/m2, 25 °C temperature and AM 1.5) is usually measured in indoor laboratories, and it characterizes the PV module at specific conditions in order to be able to compare different modules and technologies on a first step. The “Watt-peak” is not enough to evaluate the panel performance in terms of Watt-hours of various modules under different operating conditions, and it gives no assurance of being able to predict the energy performance of a certain module at given environmental conditions. A proper BIPV element for façade should take into account thermal and insulation properties, factors as transparency to allow solar gains if possible or a good solar control if necessary, aspects that are linked and high dependent on climate conditions and on the level of comfort to be reached. However, the influence of different façade integrated photovoltaic solutions on the building energy consumption is not easy to assess under real operating conditions. Thermal aspects, indoor temperatures or luminance level that can be expected using building integrated PV (BIPV) modules are not well known. As said before, integrated photovoltaic BIPV components and the use of renewable energy is already a standard for green energy production, but would also be important to know the possible contribution to improve the comfort and health of building occupants. Comfort, light transmission or protection, thermal insulation or thermal/electricity power production are aspects that are usually considered alone, while all together contribute to the building global energy balance. Besides, the need to prioritize a particular building envelope orientation to harvest the most benefit from the electrical or thermal energy production, in the case of active and passive systems respectively might be not compatible, but also not necessary. A holistic approach is needed to enable architects and engineers implementing technological systems working in synergy. A new concept have been suggested: “C-BIPV, conscious integrated BIPV”. BIPV systems have to be “consciously integrated” which means that it is essential to know the positive and negative effects in terms of comfort and energy under real operating conditions. Purpose of the work, method and results The façade-integrated photovoltaic systems are often glass solutions easily integrable, as they usually are custommade. These BIPV semi-transparent components integrated as a window element provides natural lighting and shade that prevents overheating at times of excessive heat, but as static component, likewise avoid the possible solar gains contributions in the cold months. In addition, the temperature of the module varies considerably in certain circumstances influenced by the PV technology installed, solar radiation, mounting system, lack of ventilation, etc. This factor may result in additional heat input in the building highly variable and difficult to quantify. In addition, further insights into the indoor environmental comfort in buildings using integrated photovoltaic technologies are needed to open up thereby, a new research perspective. This research aims to study their behaviour through a series of experiments in order to define the real influence on comfort aspects and on global energy building consumption, as well as, electrical and thermal characteristics of these devices. The final objective was to analyze a whole set of issues that influence the global energy consumption/production in a building using BIPV modules by quantifying the global energy balance and the BIPV system real performances. Other qualitative issues to be studied were comfort aspect (thermal and lighting aspects) and the electrical behaviour of different BIPV technologies for vertical integration, aspects that influence both energy consumption and electricity production. Thus, it will be possible to obtain a comprehensive global characterization of BIPV systems. A specific design of an outdoor test facility, the BIPV Env-lab “BIPV Test Laboratory”, for the integral characterization of different BIPV semi-transparent modules was developed and built. The method and test protocol for the BIPV characterization was also defined in a real building context and weather conditions. This has been possible once assessed the state of the art and research, the aspects that influence the architectural integration and the different possibilities and types of integration for PV and after having examined the test methods for building and photovoltaic components, under operation conditions heretofore used. The test laboratory that consists in two equivalent test rooms (1:1) has a monitoring system in which reliable data of thermal, daylighting and electrical performances can be obtained for the evaluation of PV modules. The experimental set-up facility (testing room) allows studying three different aspects that affect building energy consumption and comfort issues: the thermal indoor comfort, the lighting comfort and the energy performance of BIPV modules tested under real environmental conditions. Knowing the energy balance for each experimented solar technology, it is possible to determine which one performs best. A theoretical methodology has been proposed for evaluating these parameters, as defined in this thesis as indices or indicators, which regard comfort issues, energy and the overall performance of BIPV components. This methodology considers the existing regulatory standards for each aspect, relating them to one another. A set of insulated glass BIPV modules see-through and light-through, representative of different PV technologies (mono-crystalline silicon technology, mc-Si, amorphous silicon thin film single junction, a-Si and copper indium selenide thin film technology CIS) were selected for a series of experimental tests in order to demonstrate the validity of the proposed characterization method. As result, it has been developed and generated the ICD Integral Characterization Diagram, a graphic and visual system to represent the results and manage information, a useful operational tool for decision-making regarding to photovoltaic installations. This diagram shows all concepts and parameters studied in relation to each other and visually provides access to all the results obtained during the experimental phase to make available all the qualitative and quantitative information on the energy performance of the BIPV components by characterizing them in a comprehensive way.

Brain mechanisms of quantity are similar in 5-year-old children and adults

Both 5-year-old children and adults determine the quantity of a number by the use of a similar parietal lobe mechanism. Event related potentials indicate that input from Arabic digits and from dot patterns reach areas involved in determining quantity about 200 ms after input. However, voluntary key presses indicating the relation of the input to the quantity five take almost three times as long in children. The ability to trace the networks of brain areas involved in the learning of school subjects should aid in the design and testing of educational methods.

Sintomas de estresse e percepção de estressores escolares no início do Ensino Fundamental

O ingresso no Ensino Fundamental - EF tem sido visto como um momento de transição devido às novas demandas que apresenta para a criança. Neste contexto, parece haver um aumento da vulnerabilidade das crianças ao estresse, principalmente daquelas com maior dificuldade de adaptação a estas demandas. Esse estudo teve como objetivo amplo investigar o estresse da transição no contexto do EF de nove anos, partindo de uma visão desenvolvimentista aliada a uma perspectiva de exposição a estressores cotidianos. Especificamente, o estudo investigou a relação entre competências e sintomas de estresse no 1º ano do EF, o curso desenvolvimental dos sintomas e das percepções de estresse nos dois anos inicias do EF, suas associações com as tarefas adaptativas da transição e a influência da escola nos indicadores de estresse. Finalmente, exploraram-se modelos explicativos para indicadores de estresse apresentados no 2º ano. Seguindo metodologia prospectiva, avaliaram-se indicadores de ajustamento e competências relacionadas ao desempenho acadêmico, social e comportamental das crianças no 1º ano, estresse nos dois primeiros anos e características da escola (localização e IDEB). Participaram da pesquisa 157 alunos do 1º ano do EF, sendo 85 meninos e 72 meninas, com idade média de 6 anos e 10 meses no início da pesquisa. Todos tinham experiência de dois anos na Educação Infantil e estavam matriculados em escolas municipais de diferentes regiões de uma cidade do interior de São Paulo. Também participaram do estudo, como informantes, seus respectivos professores do 1º ano, num total de 25. As crianças responderam à Escala de Stress Infantil, ao Inventário de Estressores Escolares e a uma avaliação objetiva de desempenho acadêmico (Provinha Brasil). Os professores avaliaram as habilidades sociais, os problemas de comportamento externalizantes e internalizantes e a competência acadêmica dos seus alunos por meio do Social Skills Rating System Professores. A análise dos dados compreendeu estatísticas descritivas, comparações, correlações e regressões. Nos resultados, 57% dos alunos no 1º ano e 72% no 2º ano relataram sintomas de estresse pelo menos na fase de alerta. Crianças com estresse no 1º ano apresentaram menores índices de ajustamento e competência e perceberam suas escolas como mais estressantes em relação ao seu papel de estudante e nas relações interpessoais. Correlações moderadas entre medidas de indicadores de estresse tomadas no 1º e no 2º ano sugerem estabilidade. A presença de sintomas de estresse aumentou do 1º para o 2º ano, enquanto a percepção de estressores escolares não variou. Crianças com maiores médias de estresse são provenientes de escolas situadas em regiões periféricas e com classificação mais baixa no IDEB. As análises de predição evidenciaram a habilidade social de responsabilidade e cooperação avaliada no 1º ano como importante fator de proteção contra sintomas de estresse no 2º ano, ao passo que a percepção da criança de tensões nas relações interpessoais no 1º ano foi o principal fator de risco para futura sintomatologia de estresse. Nesse sentido, intervenções com ênfase na promoção de habilidades sociais das crianças podem ser profícuas na prevenção do estresse.