Herança da tolerância à toxidade ao alumínio (Al³+) em milho e identificação de regiões cromossomicas associadas ao caráter

A toxicidade por alumínio é uma das principais limitações para produção de plantas em áreas cultiváveis, incluindo a cultura do milho. Existe elevada variabilidade genética para o caráter tolerância ao alumínio nesta espécie, porém, a seleção é trabalhosa devido à dificuldade de avaliação a campo. Os objetivos do presente trabalho foram caracterizar a tolerância à toxicidade ao alumínio em cinco linhagens de milho e identificar marcadores moleculares ligados aos genes que determinam essa tolerância. Foi realizado um experimento dialélico entre três linhagens tolerantes e duas sensíveis ao alumínio utilizando o método de recrescimento da raiz principal (DIF). Houve superioridade das populações híbridas em relação aos genitores e, pelo desdobramento dos efeitos de heterose, houve significância nos efeitos de heterose de variedade e heterose específica. As linhagens L06 e L09 obtiveram maior capacidade geral de combinação e o cruzamento L10xL08 foi a melhor combinação específica. Para fenotipagem, realizada em famílias F3 dos cruzamentos L09xL06 e L10xL08 foi utilizado DIF e o método coloração com hematoxilina (HEM). Para análise molecular foram utilizados marcadores SSR. Foram obtidos 37 marcadores polimórficos. A análise de regressão mostrou significância em marcadores localizados nos cromossomos 4, 5, 6, 8 e 10. Os QTLs identificados explicaram 41% e 37% da variação para as variáveis DIF e HEM, respectivamente. Foi encontrada associação entre os experimentos a campo e trabalhos realizados em solução mínima para os híbridos testemunha, entretanto não houve correlação nos dados gerados pelas famílias F3 dos cruzamentos estudados. Os resultados sugerem o envolvimento de diversos genes, tratando-se de uma característica de herança complexa determinada por efeitos genéticos aditivos e nãoaditivos.

Dois novos crocodilos (Crocodyliformes, Mesoeucrocodylia) do Mato Grosso, Bacia dos Parecis : descrição e relações filogenéticas com os "Notossúquios"

São descritos dois novos táxons de Crocodyliformes do Cretáceo do Mato Grosso, que apresentam: crânios curtos; dentição heterodonte composta por dentes com lado labial mais convexo que o lado lingual e serrilhados; dentes anteriores do dentário procumbentes; presença de uma superfície distintamente lisa, acima da margem alveolar, na superfície lateral da maxila, acima da qual ocorrem forames neurovasculares; e vértebras anficélicas. Estes novos materiais foram informalmente chamados Crocodilo I e Crocodilo II. O Crocodilo I apresenta as seguintes características: fenestra pré-orbitária pequena; barra palatina posterolateral em forma de bastão; dente caniniforme hipertrofiado na pré-maxila; 6 dentes maxilares; dentes anteriores do dentário levemente voltados para trás; junta quadrado-articular localizada ventralmente à fileira dentária. O Crocodilo II, por sua vez, apresenta: focinho tubular em seção; amplo palato secundário; espleniais fusionados; 5 dentes maxilares; mandíbula com região sinfiseal alongada e espatulada. Em ambos os casos, a morfologia geral aponta muitas semelhanças com os “notossúquios”: postura elevada, regiões diferenciadas na coluna, dentição heterodonte, palato secundário relativamente amplo e cavidade nasal relativamente ampla. Para testar as relações filogenéticas dos dois táxons, bem como o próprio monofiletismo dos “notossúquios”, foi construída uma matriz de dados com 27 táxons (incluindo, tanto quanto possível, todos aqueles que já foram ou são considerados “notossúquios”) e 60 caracteres. Com base nos mesmos, foi efetuada uma análise de parcimônia utilizando Paup 3.1.1 (“stepwise addition” - “random”, com 100 repetições e “tree-bisection-reconnection”) e Nona 2.0 (algoritmo heurístico, com 10 replicações e TBR - mult*max*) que apontou uma relação dos dois novos táxons como grupos irmão sucessivos de Notosuchus e Mariliasuchus (Crocodilo II (Crocodilo I (Notosuchus, Mariliasuchus))). Em comparação com outros crocodiliformes do Cretáceo da América do Sul, África, Madagascar e China, é possível assumir que ambos são notossúquios (sensu Pol & Apesteguia, 2005). Em nossa análise, os notossúquios formam um grupo, à exceção de A. buitreraensis, mais proximamente relacionado aos Eusuchia. Na análise ordenada, A. buitreraensis, A. patagonicus e Anatosuchus aparecem mais proximamente relacionados a Eusuchia e Lybicosuchus aloca-se junto a Baurusuchus e Sebecus. Paralelamente, são discutidas análises filogenéticas prévias envolvendo notossúquios, nas quais foram introduzidas modificações, levando a diferentes topologias. A partir disso, propõe-se uma discussão acerca da influência das escolhas e procedimentos de cada autor no resultado final de análises filogenéticas.

Testando a validade da paridade de poder de compra entre regiões metropolitanas do Brasil através do IPCA

Este trabalho procurar analisar a validade da Paridade do Poder de Compra entre regiões metropolitanas do Brasil através do Índice de Preços do Consumidor Amplo (IPCA). Para isso foram realizados testes de raiz unitária para modelos lineares e não lineares, sobre cinco grupos do IPCA: Índice Geral, Administrados, Bens Comercializáveis, Bens Não Comercializáveis e Alimentos no Domicílio. O banco de dados utilizado compreende o período de 1991 a 2013 e os testes foram realizados sobre 550 séries, comparando-se todos os pares possíveis de regiões. Sob o modelo linear, não foi possível validar a PPC para a maioria das séries através do teste de raiz unitária DF-GLS, o que é diferente do esperado, uma vez que a análise intranacional elimina os efeitos da taxa de câmbio e reduz a influência dos custos de transações sobre as condições de arbitragem. Já o resultado do modelo não linear, realizado através do teste de Kapetanios, confirmou a estacionariedade de 203 séries, de tal forma que podemos afirmar que a PPC é válida para praticamente todos os pares possíveis de regiões metropolitanas abrangidas pelo IPCA nos cinco grupos estudados. Além disso, é possível observar que as séries apresentam maiores desvios entre os anos de 1991 e 1994, período marcado por grande instabilidade macroeconômica no Brasil e de sucessivos planos econômicos que não funcionaram. Após o início do plano real, em 1994, a relação da variação de preços entre regiões apresenta menor volatilidade e uma convergência mais rápida.

A influência do estoque mundial de açúcar sobre o preço internacional dessa commodit

ABSTRACT Global Sugar market has changed considerably since 1970; the dramatic fluctuations in sugar prices have affected the sugar market worldwide. Therefore, new countries such as Brazil, India, China and Thailand start to invest intensively into this market. In the new scenario, Brazil became the main producer of sugar, as well as the main exporter one. The models considered in this study showed the influence of the main sugar producers and the worldwide stocks against the commodity price behaviour. Firstly, the study showed that ending-stocks have a higher impact in the sugar prices comparing to beginning-stocks, in this case, the main countries that contribute for stocks build-up were Brazil and India. Secondly, this study evaluated the impact of the largest sugar producers against the price, the models concluded that Brazil was the most significant country followed by China. Although the study showed Brazil as the main country which impacts stocks and sugar price; it is important to highlight that other countries are also important in the context to identify the main drivers for the supply and demand dynamics in order to evaluate price levels in response of the production and stocks.

Caracterização parcial e atividades farmacológicas do extrato rico em polissacarídeos sulfatatos da angiosperma marinha Halodule wrightii

Sulfated polysaccharides (PS) are biomolecules with a great biotechnological potential. There are few data about PS from high plants. In addition, pharmacological activities of PS from plants have not been carrying out. The aim of this work was extract PS from the angiosperm Halodule wrightii and study their anticoagulant and antioxidant activities. Histological analysis showed the presence of the PS manly in the roots. A polysaccharide-rich extract was obtained from H. wrightii by proteolysis followed by methanol and TCA precipitation. Chemical, infra-red analysis and agarose gel electrophoresis in 1.3 diaminopropane acetate buffer confirmed the presence of sulfated polysaccharides made by glucose, galactose, xylose and sulfate residues in the proportion 1: 0,9: 1: 1. In addition polyacrilamide electrophoresis have shown that extract is mainly compose by 11kDa sulfated polysaccharides. Pharmacological analysis have shown total antioxidant capacity (CAT) that resulted in 15,21 μg for equivalent of ascorbic acid, scavenging activity of the DPPH radical with 41,36 % of scavenging, activity of reducing power with the maximum of 0,290 nm (50 % of vitamin C activity) and scavenging activity superoxide radical (O2-) with a maximum of 32,23 %. Chelating activity of metal less than 4% and scavenging activity of the radical hydroxyl (OH-) less than 2%. Time of activated partial tromboplastin (aPTT) doubling the time of coagulation from 20μg of and protrombin time (PT) was not present. The data indicate that PS from Halodule wrightii could be considered for future applications in medicine, food production or cosmetic industry

Caracterização parcial e atividades farmacológicas do extrato rico em polissacarídeos sulfatados da angiosperma marinha Halodule wrightii

Sulfated polysaccharides (PS) are biomolecules with a great biotechnological potential. There are few data about PS from high plants. In addition, pharmacological activities of PS from plants have not been carrying out. The aim of this work was extract PS from the angiosperm Halodule wrightii and study their anticoagulant and antioxidant activities. Histological analysis showed the presence of the PS manly in the roots. A polysaccharide-rich extract was obtained from H. wrightii by proteolysis followed by methanol and TCA precipitation. Chemical, infra-red analysis and agarose gel electrophoresis in 1.3 diaminopropane acetate buffer confirmed the presence of sulfated polysaccharides made by glucose, galactose, xylose and sulfate residues in the proportion 1: 0,9: 1: 1. In addition polyacrilamide electrophoresis have shown that extract is mainly compose by 11kDa sulfated polysaccharides. Pharmacological analysis have shown total antioxidant capacity (CAT) that resulted in 15,21 μg for equivalent of ascorbic acid, scavenging activity of the DPPH radical with 41,36 % of scavenging, activity of reducing power with the maximum of 0,290 nm (50 % of vitamin C activity) and scavenging activity superoxide radical (O2-) with a maximum of 32,23 %. Chelating activity of metal less than 4% and scavenging activity of the radical hydroxyl (OH-) less than 2%. Time of activated partial tromboplastin (aPTT) doubling the time of coagulation from 20μg of and protrombin time (PT) was not present. The data indicate that PS from Halodule wrightii could be considered for future applications in medicine, food production or cosmetic industry

Avaliação das atividades antioxidante, anticoagulante e antiproliferativa de extratos aquosos de marsdenia megalantha

The species of the genus Marsdenia, Apocynaceae, are widely used in folk medicine of several countries. In Brazil is found several species belonging to this genus. The in vitro antioxidant, anticoagulant and antiproliferative activities were evaluated to aqueous extracts of stalk, leaf and root of Marsdenia megalantha. In the total antioxidant capacity assay (expressed as ascorbic acid equivalents) the stalk extract showed 76.0 mg/g, while leaf and root extracts 141.3 mg/g and 57.0 mg/g, respectively. The stalk and leaf extracts showed chelating activity around 40% at 1.5 mg/mL, while root extract, at the same concentration showed, 17%. Only the leaf extract showed a significant ability in superoxide scavenging (80% at 0.8 mg/mL). Any extract was able in scavenge hydroxyl, as well anticoagulant activity. The antiproliferative activity of the extracts was evaluated against HeLa tumor cell line. The extracts inhibited in a dose-dependent manner the cell growth. However, the leaf extract showed 80% of inhibition at 1.0 mg/mL, while stalk and root extracts inhibited 63% and 30%, respectively. To assess the mechanism of cell death caused by the leaf extract in HeLa, was performed flow cytometry and western blot. The results show that leaf extract induces cell death by apoptosis through an activation caspase-independent pathway. These data indicate that stalk and leaf extracts obtained have potential to be used as antioxidants and anticancer drugs

Influência do número de refundições da liga Ni-Cr-Mo-Ti sobre as propriedades de próteses metalocerâmicas

A frequently encountered difficulty in oral prosthetics is associated with the loss of metallic alloys during the melting stage of the production of metal-ceramic replacement systems. Remelting such materials could impar their use in oral rehabilitation due to loss in esthetics, as well as in the chemical, physical, electrochemical and mechanical properties. Nowadays, the Ni-Cr-Mo-Ti alloy is widely used in metal-ceramic systems. Manufacturers state that this material can be remelted without significant alterations in its behavior, however little has been established as to the changes in the performance of this alloy after successive remelting, which is common practice in oral prosthetics. Therefore, the objective of this study was to evaluate possible changes in the esthetics and associated properties of metalceramic samples consisting of Ni-Cr-Mo-Ti and dental porcelain. Three to five remelting steps were carried out. The results revealed that Ni-Cr-Mo-Ti can be safely used even after three remelting steps. Further remelting significantly affect the characteristics of the alloys and should not be recommended for the manufacture of metal-ceramic systems

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Estudo da viabilidade do processo de reciclagem do material descartado do sistema Zirkonzanh® de produção de próteses dentárias

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

Acesso aos serviços odontológicos e incidência de cárie em adolescentes e fatores de risco em município do Nordeste Brasileiro, 2006

The aims of this study were to analyze the access of dental services by child population, to determine the prevalence of dental caries, gingivitis and malocclusion in resident children from the municipal district of Sobral Ceará and to evaluate the incidence of the dental decay in adolescents associated with the factors related to socioeconomic condition, access to health services and self-perception. This study had as main factor the multidisciplinary represented by the participation of health professional (doctors, dentists, nurses) in the development of the survey's initial reference; student from Human Sciences area to apply the structured questionnaire in domiciliary visits; statistics professionals in the orientation of the analysis to be held and family health team (community health agents, dentists and dental clinic assistants) in the scheduling of domiciliary visits and the accomplishment of oral exam. The sample was determined from the domicile record that included children born between 1990 and 1994 to develop the research Children health conditions in the municipal district of Sobral Ceará . The first sample comprised 3425 parents of children from 5 to 9 years old, living in the urban area at the municipal district of Sobral Ceará, aiming at identifying the most important factors associated to the access to dental service. From this sample, 1021 children were selected in a systematic way, for the accomplishment to the epidemiological study of decay, gingivitis and malocclusion. In the study's third phase, in order to arrange the group to be followed, 688 adolescents were examined and interviewed, by means of the active search from the 1021 individuals that had been previously examined. It was observed that 50.9% of the children had access to dental service at least once in a lifetime. Of this total, 65.3% accomplished it during the last year, and 85.4% of these did in public services, what allows to identify the importance of this sector in the access to dental services. It was observed that the factors that most affected the access to dental 129 services were related to socioeconomic condition, such as the access to health plan, the possession of toothbrush, garbage collecting, mother s schooling, sewerage treatment and malnutrition. In relation to oral diseases, an increase in the DMF-T index according the age was observed, from 0.10 in five years old to 1.66 in the nine years old, while with the dmf-t index, the inverse happened, since the index decreased from 3.59 in five years old to 2.69 in nine years old. In relation to gingivitis, an average 32.7% of the children presented gum bleeding. In what concerns malocclusion, it was observed that 60.3% of the children didn't present any problem, 30.17% had light malocclusion and 9.5% severe malocclusion. The average incidence of dental caries was 1.86 teeth per youngster. Among the studied variables, tooth pain in the last six months, mother's income and school snack, adjusted by the perception about the need of treatment, the mother's schooling and the dentist's appointment at least once in a lifetime, were the variables that presented positive relationship with the high incidence of dental caries on this population by logistic regression. Variables of socioeconomic nature, related to the access to health services and behavior and biological variables presented a relationship with the high caries incidence. The study point out to the need of developing health actions in a humanized way, by an oral health team effectively bound to the population's interest, with the great objective to provide, with the public health services managers, adequate conditions to improve oral health

Enraizamento de estacas de Camellia sinensis L. em função da época de coleta de ramos, genótipos e ácido indolbutírico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação in vitro da atividade antimicrobiana de diferentes soluções a base de hidróxido de cálcio

The science of Dentistry wishes obtains the ideal solution for the dental plaque chemical control. This research evaluated antimicrobial action capacity in calcium hydroxide and tergentol various solutions starting for the CHD 20, a root canals irrigating solution with a reason of 80% calcium hydroxide saturated solution and 20% tergentol detergent with the aim of evaluate this drug mouth rinse indication with prevention or combat objective for dental caries and periodontal diseases. Antibiogram disks and biofilm tests were accomplished for the microorganisms: Streptococcus mutans, Streptococcus sanguis, Streptococcus sobrinus and Lactobacillus casei. Different reasons of detergent for the calcium hydroxide saturated solution, tergentol and distillated water solution, 0,12% clorhexydine digluconate solution was positive control and distillated water was negative control. The results showed better performance of clorhexydine in relation to calcium hydroxide directing to not accept this (CHD20) as mouth rinse solution