A key gene of the RNA interference pathway in the black tiger shrimp, Penaeus monodon: Identification and functional characterisation of Dicer-1

RNA interference (RNAi) is an evolutionarily conserved mechanism by which double-stranded RNA (dsRNA) initiates post-transcriptional silencing of homologous genes. Here we report the amplification and characterisation of a full length cDNA from black tiger shrimp (Penaeus monodon) that encodes the bidentate RNAase III Dicer, a key component of the RNAi pathway. The full length of the shrimp Dicer (Pm Dcr1) cDNA is 7629 bp in length, including a 51 untranslated region (UTR) of 130 bp, a 3' UTR of 77 bp, and an open reading frame of 7422 bp encoding a polypeptide of 2473 amino acids with an estimated molecular mass of 277.895 kDa and a predicted isoelectric point of 4.86. Analysis of the deduced amino acid sequence indicated that the mature peptide contains all the seven recognised functional domains and is most similar to the mosquito (Aedes aegypti) Dicer-1 sequence with a similarity of 34.6%. Quantitative RT-PCR analysis showed that Pm Dcr1 mRNA is most highly expressed in haemolymph and lymphoid organ tissues (P 0.05). However, there was no correlation between Pm Dcr1 mRNA levels in lymphoid organ and the viral genetic loads in shrimp naturally infected with gill-associated virus (GAV) and Mourilyan virus (P > 0.05). Treatment with synthetic dsRNA corresponding to Pm Dcr1 sequence resulted in knock-down of Pm Dcr1 mRNA expression in both uninfected shrimp and shrimp infected experimentally with GAV. Knock-down of Pm Dcr1 expression resulted in more rapid mortalities and higher viral loads. These data demonstrated that Dicer is involved in antiviral defence in shrimp. (c) 2007 Elsevier Ltd. All rights reserved.

Dissection and localization of the immunostimulating domain of Edwardsiella tarda FliC

Bacterial flagellin is known to induce potent immune response in vertebrate systems via the toll-like receptor (TLR) 5. As a result, flagellin has been studied extensively as a vaccine adjuvant. In a previous study, we examined the vaccine and adjuvant potentials of the flagellin (FliC) of the fish pathogen Edwardsiella tarda. We found that E. tarda FliC induced low protective immunity by itself but could function as a molecular adjuvant and potentiate the specific immune response induced by the E. tarda antigen Eta6. Since FliC is a large protein and organized into distinct structural domains, we wondered whether the immunostimulating effect observed with the full-length protein could be localized to a certain region. To investigate this question, we in the present study dissected the FliC protein into several segments according to its structural features: (i) N163, which consists of the conserved N-terminal 163 residues of FliC; (ii) M160, which consists of the variable middle 160 residues; (iii) C94, which consists of the conserved C-terminal 94 residues; (iv) NC257, which is an artificial fusion of N163 and C94. To examine the adjuvanticity of the FliC fragments, DNA vaccine plasmids expressing FliC fragments in fusion with Eta6 were constructed and used to immunize Japanese flounder. The results showed that N163 produced the best adjuvant effect, which, in respect to improvement in the relative percent survival of the vaccinated fish, was comparable to that of the full-length FliC. None of the other FliC fragments exhibited apparent immunopotentiating effect. Further analysis showed that N163 enhanced the production of serum specific antibodies and, like full-length FliC, significantly upregulated the expression of the genes that are possibly involved in innate and adaptive immunity. These results indicate that N163 is the immunodominant region of FliC and suggest that E. tarda FliC may induce immune responses in Japanese flounder via mechanisms alternative to that involving TLR5. (C) 2010 Elsevier Ltd. All rights reserved.

Molecular characterization of an ecdysone inducible gene E75 of Chinese shrimp Fenneropenaeus chinensis and elucidation of its role in molting by RNA interference

Ecdysone inducible gene. E75 is a primary target of ecdysone receptor (EcR). and is found to play a critical role in the molting process of arthropods In this study, a cDNA encoding the E75 of Chinese shrimp Fenneropenaeus chinensis (FcE75) was cloned using RT-PCR and RACE techniques FcE75 cDNA was 3611 bp in length with an ORF of 2394 bp. The deduced amino acid sequence of FcE75 had the highest sequence identity to E75 from a land crab Gecarcinus lateral's and E75 of the shrimp Metapenaeus crisis Quantitative real-time PCR revealed a prominently high expression of FcE75 mRNA in the whole body RNA extract of late premolt period (D3) juvenile shrimp. The role of E75 in the process of shrimp molting was investigated using the RNA interference technique Long double-stranded RNA corresponding to the FcE75 (dsE75) efficiently silenced the FcE75 transcript levels in juvenile F. chinensis. Further, injection with dsE75 completely arrested the molting process in experimental shrimp which eventually caused death Setogenic analysis of the uropods from molt-arrested shrimp, showed defective epidermal retraction, poor development of setae and new cuticle. These results indicate that E75 might be related to the molting process and is essential for proper molting and survival of shrimp This is the first report demonstrating the use of double stranded RNA to elucidate the possible role of E75 in the molting of decapod crustaceans (C) 2010 Elsevier Inc All rights reserved

Expression and localization of a novel phosducin-like protein from amphioxus Branchiostoma belcheri

A full length amphioxus cDNA, encoding a novel phosducin-like protein (Amphi-PhLP), was identified for the first time from the gut cDNA library of Branchiostoma belcheri. It is comprised of 1 550 bp and an open reading frame (ORF) of 241 amino acids, with a predicted molecular mass of approximately 28 kDa. In situ hybridization histochemistry revealed a tissue-specific expression pattern of Amphi-PhLP with the high levels in the ovary, and at a lower level in the hind gut and testis, hepatic caecum, gill, endostyle, and epipharyngeal groove, while it was absent in the muscle, neural tube and notochord. In the Chinese Hamster Ovary (CHO) cells transfected with the expression plasmid pEGFP-N1/Amphi-PhLP, the fusion protein was targeted in the cytoplasm of CHO cells, suggesting that Amphi-PhLP is a cytosolic protein. This work may provide a framework for further understanding of the physiological function of Amphi-PhLP in B. belcheri.

Identification, expression, function and localization of a DUF985 domain-containing hypothetical gene from amphioxus Branchiostoma belcheri

The progress in genome sequencing has led to an increasing submission of uncharacterized hypothetical genes with the domain of unknown function, DUF985, in GenBank, and none of these genes is related to a known protein. We therefore underwent an experimental study to identify the function of a DUF985 domain-containing hypothetical gene BbDUF985 (GenBank Accession No. AY273818) isolated from amphioxus Branchiostoma belcheri (B. belcheri). BbDUF985 was successfully expressed in both prokaryotic and eukaryotic systems, and its recombinant proteins expressed in both systems definitely exhibited an activity of phosphoglucose isomerase (PGI). Both tissue-section in situ hybridization and immunohistochemistry demonstrated that BbDUF985 was expressed in a tissue-specific manner, with most abundant levels in the hepatic caecum and ovary. In CHO cells transfected with the expression plasmid pEGFP-N1/BbDUF985, the fusion protein was targeted in the cytoplasm of CHO cells, suggesting that BbDUF985 is a cytosolic protein. In contrast, Western blotting indicated that BbDUF985 was also present in amphioxus humoral fluids, suggesting that it exists as a secreted protein as well. Our study provided a framework for further understanding the biochemical properties and physiological function of DUF985-containing hypothetical proteins in other species. (c) 2008 Elsevier Inc. All rights reserved.

Localization of the electric-field distribution in graded core-shell metamaterials

The local electric-field distribution has been investigated in a core-shell cylindrical metamaterial structure under the illumination of a uniform incident optical field. The structure consists of a homogeneous dielectric core, a shell of graded metal-dielectric metamaterial, embedded in a uniform matrix. In the quasistatic limit, the permittivity of the metamaterial is given by the graded Drude model. The local electric potentials and hence the electric fields have been derived exactly and analytically in terms of hypergeometric functions. Our results showed that the peak of the electric field inside the cylindrical shell can be confined in a desired position by varying the frequency of the optical field and the parameters of the graded profiles. Thus, by fabricating graded metamaterials, it is possible to control electric-field distribution spatially. We offer an intuitive explanation for the gradation-controlled electric-field distribution.

Chromosomal mapping of 5S ribosomal RNA genes in the eastern oyster, Crassostrea virginica gmelin by fluorescence in situ hybridization

Chromosomal location of the 5S ribosomal RNA gene was studied in the eastern oyster, Crassostrea virginica Gmelin. using fluorescence in situ hybridization (FISH). Metaphase chromosomes were obtained from early embryos, and the FISH probe was made by PCR (polymerase chain reaction) amplification of the 5S rRNA gene and labeled by incorporation of digoxigenin-1 1-dUTP during PCR. Hybridization was detected with fluorescein-labeled antidigoxigenin antibodies. Two pairs of FISH signals were observed on metaphase chromosomes. Karyotypic analysis showed that the 5S rRNA gene cluster is interstitially located on short arms of chromosomes 5 and 6. On chromosome 5, the 5S rRNA genes were located immediately next to the centromere, whereas on chromosome 6, they were located approximately half way between the telomere and the centromere. Chromosomes of C. virginica are difficult to identify because of their similarities in size and arm ratio, and the chromosomal location of 5S rRNA genes provides unambiguous identification of chromosomes 5 and 6. Previous studies have mapped the major rRNA gene cluster (18S-5.8S-28S) to chromosome 2. and this study shows that the 5S rRNA gene cluster is not linked to the major rRNA genes and duplicated during evolution.

Chromosomal rearrangement in Pectinidae revealed by rRNA loci and implications for bivalve evolution

Karyotype and chromosomal localization of major (18-5.8-28S) and minor (5S) ribosomal RNA genes were studied in two species of Pectinidae, zhikong (Chlamys farreri) and bay (Argopecten irradians irradians) scallops. using fluorescence in situ hybridization (FISH). C. farreri had a haploid number of 19 with a karyotype of 3m + 4sm + 7sm-st + 4st + 1st-t, and A. i. irradians had a haploid number of 16 with a karyotype of 5st + 11t. In C. farreri, the major and minor rRNA genes had one locus each and were mapped to the same chromosome-Chromosome 5. In A. i. irradians, the major rRNA genes had two loci, located on Chromosomes 4 and 8, and the 5S rRNA gene was found at a third chromosome-Chromosome 10. Results of this and other studies indicate that karyotype of A. i. irradians (n = 16, 21 arms) is secondary and derived from an ancestral karyotype similar to that of C. farreri (n = 19, 38 arms) through considerable chromosomal loss and rearrangements. The ability to tolerate significant chromosomal loss suggests that the modal karyotype of Pectinidae and possibly other bivalves with a haploid number of 19 is likely tetraploid; i.e., at least one genome duplication has occurred during the evolution of Bivalvia.

Chromosomal mapping of the major ribosomal RNA genes in the dwarf surfclam (Mulinia lateralis Say)

Chromosomal location of the major ribosomal RNA genes (rRNA) were studied in the dwarf surfclam (Mulinia lateralis, Say) using fluorescence in situ hybridization (FISH). FISH probes for the rRNA genes were made by polymerase chain reaction (PCR), labeled with digoxigenin-11-dUTP and detected with fluorescein-labeled antidigoxigenin antibodies. Mulinia lateralis had a diploid number of 38 chromosomes and all chromosomes were telocentric. FISH with the rRNA probe produced positive and consistent signals on two pairs of chromosomes: Chromosome 15 with a relative length of 4.6% and Chromosome 19, the shortest chromosome. Both loci were telomeric. The rRNA location provides the first physical landmark of the M. lateralis genome.

Feature Matching for Object Localization in the Presence of Uncertainty

We consider the problem of matching model and sensory data features in the presence of geometric uncertainty, for the purpose of object localization and identification. The problem is to construct sets of model feature and sensory data feature pairs that are geometrically consistent given that there is uncertainty in the geometry of the sensory data features. If there is no geometric uncertainty, polynomial-time algorithms are possible for feature matching, yet these approaches can fail when there is uncertainty in the geometry of data features. Existing matching and recognition techniques which account for the geometric uncertainty in features either cannot guarantee finding a correct solution, or can construct geometrically consistent sets of feature pairs yet have worst case exponential complexity in terms of the number of features. The major new contribution of this work is to demonstrate a polynomial-time algorithm for constructing sets of geometrically consistent feature pairs given uncertainty in the geometry of the data features. We show that under a certain model of geometric uncertainty the feature matching problem in the presence of uncertainty is of polynomial complexity. This has important theoretical implications by demonstrating an upper bound on the complexity of the matching problem, an by offering insight into the nature of the matching problem itself. These insights prove useful in the solution to the matching problem in higher dimensional cases as well, such as matching three-dimensional models to either two or three-dimensional sensory data. The approach is based on an analysis of the space of feasible transformation parameters. This paper outlines the mathematical basis for the method, and describes the implementation of an algorithm for the procedure. Experiments demonstrating the method are reported.

Localization and Positioning Using Combinations of Model Views

A method for localization and positioning in an indoor environment is presented. The method is based on representing the scene as a set of 2D views and predicting the appearances of novel views by linear combinations of the model views. The method is accurate under weak perspective projection. Analysis of this projection as well as experimental results demonstrate that in many cases it is sufficient to accurately describe the scene. When weak perspective approximation is invalid, an iterative solution to account for the perspective distortions can be employed. A simple algorithm for repositioning, the task of returning to a previously visited position defined by a single view, is derived from this method.

Dependency-Directed Localization of Software Bugs

Software bugs are violated specifications. Debugging is the process that culminates in repairing a program so that it satisfies its specification. An important part of debugging is localization, whereby the smallest region of the program that manifests the bug is found. The Debugging Assistant (DEBUSSI) localizes bugs by reasoning about logical dependencies. DEBUSSI manipulates the assumptions that underlie a bug manifestation, eventually localizing the bug to one particular assumption. At the same time, DEBUSSI acquires specification information, thereby extending its understanding of the buggy program. The techniques used for debugging fully implemented code are also appropriate for validating partial designs.

Automated Assembly Using Feature Localization

Automated assembly of mechanical devices is studies by researching methods of operating assembly equipment in a variable manner; that is, systems which may be configured to perform many different assembly operations are studied. The general parts assembly operation involves the removal of alignment errors within some tolerance and without damaging the parts. Two methods for eliminating alignment errors are discussed: a priori suppression and measurement and removal. Both methods are studied with the more novel measurement and removal technique being studied in greater detail. During the study of this technique, a fast and accurate six degree-of-freedom position sensor based on a light-stripe vision technique was developed. Specifications for the sensor were derived from an assembly-system error analysis. Studies on extracting accurate information from the sensor by optimally reducing redundant information, filtering quantization noise, and careful calibration procedures were performed. Prototype assembly systems for both error elimination techniques were implemented and used to assemble several products. The assembly system based on the a priori suppression technique uses a number of mechanical assembly tools and software systems which extend the capabilities of industrial robots. The need for the tools was determined through an assembly task analysis of several consumer and automotive products. The assembly system based on the measurement and removal technique used the six degree-of-freedom position sensor to measure part misalignments. Robot commands for aligning the parts were automatically calculated based on the sensor data and executed.