Flow similariy applied in convection-based tilt sensor

The environment temperature has inevitable effects on property of the convect ion-based tilt sensors. It not only redefines the application, but also prevents the improvement of the sensor performance. Numerical simulation of the fluid flow in the chamber of a sensor was performed and the influence of the environment temperature was studied in this paper. At zero tilt angle, the temperature distribution along the perpendicular line cross the heat source at various environment temperatures was presented. It was found that the flow varied dramatically at different environment temperatures, which would cause the output signal vary accordingly, even when the tilt angle was kept at a constant, because this device works by sensing the change of flow. At the same condition, we present the numerical results when the temperature difference across the heat source and the environment was kept at the same, in those results, it was found that the temperature difference at every point along the perpendicular line cross the heat source keep the same, this result confirms the similarity principle of nature convection. Second, A method of eliminating environment temperature infect on property of convect ion-based tilt sensor, which is based on the theory of flow similarity, is proposed. It was found that a thermal transistance can be piped on the circuit of heat source to compensate the temperature of the heat source. A compensative circuit was specially designed which can keep flow similarity by changing heat source temperature in order to eliminate the influence of environment temperature. The experiment results show that above 70% temperature drift can be eliminated by this compensative circuit.

Multiple table factor analysis applied to the higher education competences

Due to the recent implantation of the Bologna process, the definition of competences in Higher Education is an important matter that deserves special attention and requires a detailed analysis. For that reason, we study the importance given to severa! competences for the professional activity and the degree to which these competences have been achieved through the received education. The answers include also competences observed in two periods of time given by individuals of multiple characteristics. In this context and in order to obtain synthesized results, we propose the use of Multiple Table Factor Analysis. Through this analysis, individuals are described by severa! groups, showing the most important variability factors of the individuals and allowing the analysis of the common structure ofthe different data tables. The obtained results will allow us finding out the existence or absence of a common structure in the answers of the various data tables, knowing which competences have similar answer structure in the groups of variables, as well as characterizing those answers through the individuals.

The status of shark and ray fishery resources in the Gulf of California: applied research to improve management and conservation

Seasonal surveys were conducted during 1998–1999 in Baja California, Baja California Sur, Sonora, and Sinaloa to determine the extent and activities of artisanal elasmobranch fisheries in the Gulf of California. One hundred and forty–seven fishing sites, or camps, were documented, the majority of which (n = 83) were located in Baja California Sur. Among camps with adequate fisheries information, the great majority (85.7%) targeted elasmobranchs during some part of the year. Most small, demersal sharks and rays were landed in mixed species fisheries that also targeted demersal teleosts, but large sharks were usually targeted in directed drift gillnet or, to a lesser extent, surface longline fisheries. Artisanal fishermen were highly opportunistic, and temporally switched targets depending on the local productivity of teleost, invertebrate, and elasmobranch fishery resources. Major fisheries for small sharks (< 1.5 m, “cazón”) were documented in Baja California during spring, in Sonora during autumn–spring, and in Sinaloa during winter and spring. Triakid sharks (Mustelus spp.) dominated cazón landings in the northern states, whereas juvenile scalloped hammerheads (Sphyrna lewini) primarily supported the fishery in Sinaloa. Large sharks (> 1.5 m, “tiburón”) were minor components of artisanal elasmobranch fisheries in Sonora and Sinaloa, but were commonly targeted during summer and early autumn in Baja California and Baja California Sur. The pelagic thresher shark (Alopias pelagicus) and silky shark (Carcharhinus falciformis) were most commonly landed in Baja California, whereas a diverse assemblage of pelagic and large coastal sharks was noted among Baja California Sur landings. Rays dominated summer landings in Baja California and Sinaloa, when elevated catch rates of the shovelnose guitarfish (Rhinobatos productus, 13.2 individuals/vessel/trip) and golden cownose ray (Rhinoptera steindachneri, 11.1 individuals/vesse/trip) primarily supported the respective fisheries. The Sonoran artisanal elasmobranch fishery was the most expansive recorded during this study, and rays (especially R. productus) dominated spring and summer landings in this state. Seasonal catch rates of small demersal sharks and rays were considerably greater in Sonora than in other surveyed states. Many tiburón populations (e.g., C. leucas, C. limbatus, C. obscurus, Galeocerdo cuvier) have likely been overfished, possibly shifting effort towards coastal populations of cazón and rays. Management recommendations, including conducting demographic analyses using available life history data, determining and protecting nursery areas, and enacting seasonal closures in areas of elasmobranch aggregation (e.g., reproduction, feeding), are proposed. Without effective, enforceable management to sustain or rebuild targeted elasmobranch populations in the Gulf of California, collapse of many fisheries is a likely outcome. (PDF contains 243 pages)

中国力学学会史 = A history of Chinese society of theoretical and applied mechanics

《中国力学学会史》是《中国学会史丛书》之一。是一部全面系统记述中国力学学会建立与发展历程的专著。 《中国力学学会史》全书30万字，书中不但重点对学会的初创情况、发展过程、组织建设、学术交流、分支机构等进行了专门介绍，还特别收录了记述学会重大活动情况的大事记、名人与学会发展的丰富资料和一些极有史料价值的历史照片，旨在反映学会在不同时期的活动概况及其在中国力学界中发挥的桥梁与纽带作用。 中国力学学会是中国科协的组成部分，也是我国著名的学术团体之一，仅以此书的编著出版，纪念中国科协成立50周年和中国力学学会成立50多周年。本书可供力学界和科技界有关部门及工作者、各学会相关人员、大专院校师生参阅，也可作为组织和开展国内外学术交流研究的参考资料。

An increment technique for estimating growth parameters of tropical tunas, as applied to yellowfin tuna (Thunnus albacares)

ENGLISH: The rate of growth of tropical tunas has been studied by various investigators using diverse methods. Hayashi (1957) examined methods to determine the age of tunas by interpreting growth patterns on the bony or hard parts, but the results proved unreliable. Moore (1951), Hennemuth (1961), and Davidoff (1963) studied the age and growth of yellowfin tuna by the analysis of size frequency distributions. Schaefer, Chatwin and Broadhead (1961), and Fink (ms.), estimated the rate of growth of yellowfin tuna from tagging data; their estimates gave a somewhat slower rate of growth than that obtained by the study of length-frequency distributions. For the yellowfin tuna, modal groups representing age groups can be identified and followed for relatively long periods of time in length-frequency graphs. This may not be possible, however, for other tropical tunas where the modal groups may not represent identifiable age groups; this appears to be the case for skipjack tuna (Schaefer, 1962). It is necessary, therefore, to devise a method of estimating the growth rates of such species without identifying the year classes. The technique described in this study, hereafter called the "increment technique", employs the measurement of the change in length per unit of time, with respect to mean body length, without the identification of year classes. This technique is applied here as a method of estimating the growth rate of yellowfin tuna from the entire Eastern Tropical Pacific, and from the Commission's northern statistical areas (Areas 01-04 and 08) as shown in Figure 1. The growth rates of yellowfin tuna from Area 02 (Hennemuth, 1961) and from the northern areas (Davidoff, 1963) have been described by the technique of tracing modal progressions of year classes, hereafter termed the "year class technique". The growth rate analyses performed by both techniques apply to the segment of the population which is captured by tuna fishing vessels. The results obtained by both methods are compared in this report. SPANISH: La tasa del crecimiento de los atunes tropicales ha sido estudiada por varios investigadores quienes usaron diversos métodos. Hayashi (1957) examinó los métodos para determinar la edad de los atunes interpretando las marcas del crecimiento de las partes óseas o duras, pero los resultados no han demostrado eficacia. Moore (1951), Hennemuth (1961) y Davidoff (1963) estudiaron la edad y el crecimiento del atún aleta amarilla por medio del análisis de las distribuciones de la frecuencia de tamaños. Schaefer, Chatwin y Broadhead (1961) y Fink (Ms.), estimaron la tasa del crecimiento del atún aleta amarilla valiéndose de los datos de la marcación de los peces; ambos estimaron una tasa del crecimiento algo más lenta que la que se obtiene mediante el estudio de las distribuciones de la frecuencia de longitudes. Para el atún aleta amarilla, los grupos modales que representan grupos de edad pueden ser identificados y seguidos durante períodos de tiempo relativamente largos en los gráficos de la frecuencia de longitudes. Sin embargo, ésto puede no ser posible para otros atunes tropicales para los cuales los grupos modales posiblemente no representan grupos de edad identificables; este parece ser el caso para el barrilete (Schaefer, 1962). Consecuentemente, es necesario idear un método para estimar las tasas del crecimiento de las mencionadas especies sin necesidad de identificar las clases anuales. La técnica descrita en este estudio, en adelante llamada la "técnica incremental", emplea la medida del cambio en la longitud por unidad de tiempo, con respecto al promedio de la longitud corporal, sin tener que identificar las clases anuales. Esta técnica se aplica aquí como un método para estimar la tasa del crecimiento del atún aleta amarilla de todo el Pacífico Oriental Tropical, y de las áreas estadísticas norteñas de la Comisión (Areas 01-04 y 08), como se muestra en la Figura 1. Las tasas del crecimiento del atún aleta amarilla del Area 02 (Hennemuth, 1961) y de las áreas del norte (Davidoff, 1963), han sido descritas por medio de una técnica que consiste en delinear las progresiones modales de las clases anuales, en adelante llamada la "técnica de la clase anual". Los análisis de la tasa del crecimiento llevados a cabo por ambas técnicas se refieren al segmento de la población capturada por embarcaciones pesqueras de atún. Los resultados obtenidos por ambos métodos se comparan en este informe.

Grouping materials and processes for the designer: an application for cluster analysis.

In this paper, an analytical tool - cluster analysis - that is commonly used in biology, archaeology, linguistics and psychology is applied to materials and design. Here we use it to cluster materials and the processes that shape them, using their attributes as indicators of relationship. The attributes that are chosen are important to design and designers. The resulting clusters, and the classifications that can be developed from them, depend on the selected attributes and - to some extent - on the method of clustering. Alternative classifications for design that is focused on the technical or aesthetic attributes of materials and the materials and shapes allowed by processes are explored.

A Continuation Method Applied to the Study of Thermocapillary Instabilities in Liquid Bridges

A continuation method is applied to investigate the linear stability of the steady, axisymmetric thermocapillary flows in liquid bridges. The method is based upon an appropriate extended system of perturbation equations depending on the nature of transition of the basic flow. The dependence of the critical Reynolds number and corresponding azimuthal wavenumber on serval parameters is presented for both cylindrical and non-cylindrical liquid bridges.