Formation mechanisms of secondary organic aerosols in relation to laser printer emissions

Due to their large surface area, complex chemical composition and high alveolar deposition rate, ultrafine particles (UFPs) (< 0.1 ìm) pose a significant risk to human health and their toxicological effects have been acknowledged by the World Health Organisation. Since people spend most of their time indoors, there is a growing concern about the UFPs present in some indoor environments. Recent studies have shown that office machines, in particular laser printers, are a significant indoor source of UFPs. The majority of printer-generated UFPs are organic carbon and it is unlikely that these particles are emitted directly from the printer or its supplies (such as paper and toner powder). Thus, it was hypothesised that these UFPs are secondary organic aerosols (SOA). Considering the widespread use of printers and human exposure to these particles, understanding the processes involved in particle formation is of critical importance. However, few studies have investigated the nature (e.g. volatility, hygroscopicity, composition, size distribution and mixing state) and formation mechanisms of these particles. In order to address this gap in scientific knowledge, a comprehensive study including state-of-art instrumental methods was conducted to characterise the real-time emissions from modern commercial laser printers, including particles, volatile organic compounds (VOCs) and ozone (O3). The morphology, elemental composition, volatility and hygroscopicity of generated particles were also examined. The large set of experimental results was analysed and interpreted to provide insight into: (1) Emissions profiles of laser printers: The results showed that UFPs dominated the number concentrations of generated particles, with a quasi unimodal size distribution observed for all tests. These particles were volatile, non-hygroscopic and mixed both externally and internally. Particle microanalysis indicated that semi-volatile organic compounds occupied the dominant fraction of these particles, with only trace quantities of particles containing Ca and Fe. Furthermore, almost all laser printers tested in this study emitted measurable concentrations of VOCs and O3. A positive correlation between submicron particles and O3 concentrations, as well as a contrasting negative correlation between submicron particles and total VOC concentrations were observed during printing for all tests. These results proved that UFPs generated from laser printers are mainly SOAs. (2) Sources and precursors of generated particles: In order to identify the possible particle sources, particle formation potentials of both the printer components (e.g. fuser roller and lubricant oil) and supplies (e.g. paper and toner powder) were investigated using furnace tests. The VOCs emitted during the experiments were sampled and identified to provide information about particle precursors. The results suggested that all of the tested materials had the potential to generate particles upon heating. Nine unsaturated VOCs were identified from the emissions produced by paper and toner, which may contribute to the formation of UFPs through oxidation reactions with ozone. (3) Factors influencing the particle emission: The factors influencing particle emissions were also investigated by comparing two popular laser printers, one showing particle emissions three orders of magnitude higher than the other. The effects of toner coverage, printing history, type of paper and toner, and working temperature of the fuser roller on particle number emissions were examined. The results showed that the temperature of the fuser roller was a key factor driving the emission of particles. Based on the results for 30 different types of laser printers, a systematic positive correlation was observed between temperature and particle number emissions for printers that used the same heating technology and had a similar structure and fuser material. It was also found that temperature fluctuations were associated with intense bursts of particles and therefore, they may have impact on the particle emissions. Furthermore, the results indicated that the type of paper and toner powder contributed to particle emissions, while no apparent relationship was observed between toner coverage and levels of submicron particles. (4) Mechanisms of SOA formation, growth and ageing: The overall hypothesis that UFPs are formed by reactions with the VOCs and O3 emitted from laser printers was examined. The results proved this hypothesis and suggested that O3 may also play a role in particle ageing. In addition, knowledge about the mixing state of generated particles was utilised to explore the detailed processes of particle formation for different printing scenarios, including warm-up, normal printing, and printing without toner. The results indicated that polymerisation may have occurred on the surface of the generated particles to produce thermoplastic polymers, which may account for the expandable characteristics of some particles. Furthermore, toner and other particle residues on the idling belt from previous print jobs were a very clear contributing factor in the formation of laser printer-emitted particles. In summary, this study not only improves scientific understanding of the nature of printer-generated particles, but also provides significant insight into the formation and ageing mechanisms of SOAs in the indoor environment. The outcomes will also be beneficial to governments, industry and individuals.

Aggregate distance based clustering using Fibonacci Series -FIBCLUS

This paper proposes an innovative instance similarity based evaluation metric that reduces the search map for clustering to be performed. An aggregate global score is calculated for each instance using the novel idea of Fibonacci series. The use of Fibonacci numbers is able to separate the instances effectively and, in hence, the intra-cluster similarity is increased and the inter-cluster similarity is decreased during clustering. The proposed FIBCLUS algorithm is able to handle datasets with numerical, categorical and a mix of both types of attributes. Results obtained with FIBCLUS are compared with the results of existing algorithms such as k-means, x-means expected maximization and hierarchical algorithms that are widely used to cluster numeric, categorical and mix data types. Empirical analysis shows that FIBCLUS is able to produce better clustering solutions in terms of entropy, purity and F-score in comparison to the above described existing algorithms.

A natural model for architecture

In John Frazer's seminal book An Evolutionary Architecture (1995), from which this essay is extracted, a fundamental approach is established for have natural systems can unfold mechanisms for negotiating the complex design space inherent in architectural systems. In this essay, which forms a critical part of the book, Frazer draws both correlations and distinctions from natural processes as emulated in design processes and form as active manifestations within natural systems. Form is seen as an evolving agent generated via the rules of descriptive genetic coding, functioning as a part of a metabolic environment. Frazer's process-model establishes the realm in which computation must manoeuvre to produce a valid solution space, including the operations of self-organisation, complexity and emergent behaviour. Addressing design as an authored practice, he extends the transference of 'creativity' from the explicit impression into form, to the investment of though, organisation and strategy in the computational processes which produce form. Frazer's text concentrates astutely on the practising of the evolutionary paradigm, the output of which postulates an architecture born of the relationships to dynamic environmental and socio-economic contexts, and realised through morphogenetic materialisation.

The conceptual and operational compatibility of data breach notification and information privacy laws

Mandatory data breach notification laws are a novel and potentially important legal instrument regarding organisational protection of personal information. These laws require organisations that have suffered a data breach involving personal information to notify those persons that may be affected, and potentially government authorities, about the breach. The Australian Law Reform Commission (ALRC) has proposed the creation of a mandatory data breach notification scheme, implemented via amendments to the Privacy Act 1988 (Cth). However, the conceptual differences between data breach notification law and information privacy law are such that it is questionable whether a data breach notification scheme can be solely implemented via an information privacy law. Accordingly, this thesis by publications investigated, through six journal articles, the extent to which data breach notification law was conceptually and operationally compatible with information privacy law. The assessment of compatibility began with the identification of key issues related to data breach notification law. The first article, Stakeholder Perspectives Regarding the Mandatory Notification of Australian Data Breaches started this stage of the research which concluded in the second article, The Mandatory Notification of Data Breaches: Issues Arising for Australian and EU Legal Developments (‘Mandatory Notification‘). A key issue that emerged was whether data breach notification was itself an information privacy issue. This notion guided the remaining research and focused attention towards the next stage of research, an examination of the conceptual and operational foundations of both laws. The second article, Mandatory Notification and the third article, Encryption Safe Harbours and Data Breach Notification Laws did so from the perspective of data breach notification law. The fourth article, The Conceptual Basis of Personal Information in Australian Privacy Law and the fifth article, Privacy Invasive Geo-Mashups: Privacy 2.0 and the Limits of First Generation Information Privacy Laws did so for information privacy law. The final article, Contextualizing the Tensions and Weaknesses of Information Privacy and Data Breach Notification Laws synthesised previous research findings within the framework of contextualisation, principally developed by Nissenbaum. The examination of conceptual and operational foundations revealed tensions between both laws and shared weaknesses within both laws. First, the distinction between sectoral and comprehensive information privacy legal regimes was important as it shaped the development of US data breach notification laws and their subsequent implementable scope in other jurisdictions. Second, the sectoral versus comprehensive distinction produced different emphases in relation to data breach notification thus leading to different forms of remedy. The prime example is the distinction between market-based initiatives found in US data breach notification laws compared to rights-based protections found in the EU and Australia. Third, both laws are predicated on the regulation of personal information exchange processes even though both laws regulate this process from different perspectives, namely, a context independent or context dependent approach. Fourth, both laws have limited notions of harm that is further constrained by restrictive accountability frameworks. The findings of the research suggest that data breach notification is more compatible with information privacy law in some respects than others. Apparent compatibilities clearly exist as both laws have an interest in the protection of personal information. However, this thesis revealed that ostensible similarities are founded on some significant differences. Data breach notification law is either a comprehensive facet to a sectoral approach or a sectoral adjunct to a comprehensive regime. However, whilst there are fundamental differences between both laws they are not so great to make them incompatible with each other. The similarities between both laws are sufficient to forge compatibilities but it is likely that the distinctions between them will produce anomalies particularly if both laws are applied from a perspective that negates contextualisation.

Designing relational pedagogies with jam2jamXO

This paper examines the affordances of the philosophy and practice of open source and the application of it in developing music education software. In particular I will examine the parallels inherent in the ‘openness’ of pragmatist philosophy in education (Dewey 1916, 1989) such as group or collaborative learning, discovery learning (Bruner 1966) and learning through creative activity with computers (Papert 1980, 1994). Primarily I am interested in ‘relational pedagogies’ (Ruthmann and Dillon In Press) which is in a real sense about the ethics of the transaction between student and teacher in an ecology where technology plays a more significant role. In these contexts relational pedagogies refers to how the music teacher manages their relationships with students and evaluates the affordances of open source technology in that process. It is concerned directly with how the relationship between student and teacher is affected by the technological tools, as is the capacity for music making and learning. In particular technologies that have agency present the opportunity for a partnership between user and technology that enhances the capacity for expressive music making, productive social interaction and learning. In this instance technologies with agency are defined as ones that enhance the capacity to be expressive and perform tasks with virtuosity and complexity where the technology translates simple commands and gestures into complex outcomes. The technology enacts a partnership with the user that becomes both a cognitive and performative amplifier. Specifically we have used this term to describe interactions with generative technologies that use procedural invention as a creative technique to produce music and visual media.

ThinkLifecycle

Exhibited at The Fashioning the Future Awards Showcase exhibition Fashioning the Future Awards is the leading international cross-disciplinary platform for celebrating innovative initiatives towards fashion design for sustainability, its development and communication. The 2011 awards are a showcase for exceptional work that celebrates ‘Unique’ ways to create our futures. Fashioning the Future is designed and coordinated by the Centre for Sustainable Fashion at London College of Fashion. Unique Enterprise Award The Unique Enterprise Award was offered for the consideration of the opportunities that arise from the necessity to solve the issues around water, waste, wellbeing, energy, equality and biodiversity. Winner Alice Payne According to Alice Payne there is no one-size-fits-all approach to creating a sustainable fashion system. Existing companies will need to evolve, change the way they design and produce garments, offer services rather than products, and engage with the end user to consider the end of life and future lives of their garments. The ThinkLifecycle content management system (CMS) acts as a bridge between existing industry practices and new, redirected practice in which sustainability is at the forefront of commercial thinking. Its chief aim is to embed lifecycle thinking within a company at a daily, operational level.

Managing financial implications for sustainable highway infrastructure delivery

Highway construction works have significant bearings on all aspects of sustainability. As they typically involve huge capital funds, stakeholders tend to place all interests on the financial justifications of the project, especially when embedding sustainability principles and practices may demand significant initial investment. Increasing public awareness and government policies demand that infrastructure projects respond to environmental challenges and people start to realise the negative consequences of not to pursue sustainability. Stakeholders are now keen to identify sustainable alternatives and financial implications of including them on a whole lifecycle basis. Therefore tools that aid the evaluation of investment options, such as provision of environmentally sustainable features in roads and highways, are highly desirable. Life-cycle cost analysis (LCCA) is generally recognised as a valuable approach for investment decision making for construction works. However to date it has limited application because the current LCCA models tend to focus on economic issues alone and are not able to deal with sustainability factors. This paper reports a research on identifying sustainability related factors in highway construction projects, in quantitative and qualitative forms of a multi-criteria analysis. These factors are then incorporated into existing LCCA models to produce a new sustainability based LCCA model with cost elements specific to sustainability measures. This presents highway project stakeholders a practical tool to evaluate investment decisions and reach an optimum balance between financial viability and sustainability deliverables.

Study of tissue damage during mechanical peeling of tough skinned vegetables

Peeling is an essential phase of post harvesting and processing industry; however the undesirable losses and waste rate that occur during peeling stage are always the main concern of food processing sector. There are three methods of peeling fruits and vegetables including mechanical, chemical and thermal, depending on the class and type of fruit. By comparison, the mechanical method is the most preferred; this method keeps edible portions of produce fresh and creates less damage. Obviously reducing material losses and increasing the quality of the process has a direct effect on the whole efficiency of food processing industry which needs more study on technological aspects of this industrial segment. In order to enhance the effectiveness of food industrial practices it is essential to have a clear understanding of material properties and behaviour of tissues under industrial processes. This paper presents the scheme of research that seeks to examine tissue damage of tough skinned vegetables under mechanical peeling process by developing a novel FE model of the process using explicit dynamic finite element analysis approach. In the proposed study a nonlinear model which will be capable of simulating the peeling process specifically, will be developed. It is expected that unavailable information such as cutting force, maximum shearing force, shear strength, tensile strength and rupture stress will be quantified using the new FEA model. The outcomes will be used to optimize and improve the current mechanical peeling methods of this class of vegetables and thereby enhance the overall effectiveness of processing operations. Presented paper aims to review available literature and previous works have been done in this area of research and identify current gap in modelling and simulation of food processes.

A Research Framework for Investigating Public Private Partnerships (PPP) in Hong Kong

PPP is a general term covering all contracted relationships between the public and private sectors to produce a public asset or to deliver a public service. Its major advantage lies in utilising resources from the private sector to alleviate some of the financial burdens of the government. The Asian financial turmoil in the late 1990s has imposed enormous pressure on the budget of the Hong Kong Special Administrative Region (HKSAR) Government. With a continuous outcry for better public services due to the rapid development of Hong Kong, alternative financing models need to be sought to ensure sustainability. Hong Kong has the advantage of being the international gateway to Mainland China, and with this benefit has attracted overseas enterprises to base their offices in Hong Kong for the Asian market. Obviously the private sector has much to contribute. The HKSAR Government has realised the benefits of using PPP in Hong Kong as well as the success achieved overseas. But a more thorough research is needed to develop the most suitable practice of PPP in terms of project nature, project complexity, project type and project scale under which PPP is most appropriate for Hong Kong. This paper provides an initial report of a research project being funded by the Research Grants Council (RGC) of the HKSAR. The project aims to evaluate the benefits and risks of PPP adopted in Australia and the United Kingdom, and from these previous experiences to develop a best practice framework for implementing PPP in Hong Kong. It firstly reports on the status of PPP development trend and the hands-on experiences which have been drawn in these countries. Qualitative and quantitative research methods applied in conducting the research are discussed. The likely impacts of the study are highlighted. It is believed that the construction industry and the government would benefit a lot as a result of this study, and further procurement and project financing options would be opened up for delivering better future public service.

Human Information behavior (introduction to special issue)

Information behavior studies are a growing body of research that highlights the importance of information for everyone in the information age. This e-book presents an international and diverse range of studies and insights into the current state of theories and models of information behavior. There is an emphasis on the socialpersonalhuman dimensions of information seeking using social science methods and theoretical frameworks. The studies particularly draw on the methods and theories of anthropology, sociology and psychology to produce interpretations of the way in which information is experienced in the lives of individuals working as critical care nurses in a medical environment, the information seeking behavior of the visually impaired, the social interactions within knitting circles in public libraries, and attempts to apply information behavior theory to the design of information solutions. Collectively the papers contribute more generally to our understanding of information behavior theory and models, including the medical and retrieval contexts.

Sequential Monte Carlo for Bayesian sequentially designed experiments for discrete data

In this paper we present a sequential Monte Carlo algorithm for Bayesian sequential experimental design applied to generalised non-linear models for discrete data. The approach is computationally convenient in that the information of newly observed data can be incorporated through a simple re-weighting step. We also consider a flexible parametric model for the stimulus-response relationship together with a newly developed hybrid design utility that can produce more robust estimates of the target stimulus in the presence of substantial model and parameter uncertainty. The algorithm is applied to hypothetical clinical trial or bioassay scenarios. In the discussion, potential generalisations of the algorithm are suggested to possibly extend its applicability to a wide variety of scenarios

The social orders of family mealtime

This study examined the everyday practices of families within the context of family mealtime to investigate how members accomplished mealtime interactions. Using an ethnomethodological approach, conversation analysis and membership categorization analysis, the study investigated the interactional resources that family members used to assemble their social orders moment by moment during family mealtimes. While there is interest in mealtimes within educational policy, health research and the media, there remain few studies that provide fine-grained detail about how members produce the social activity of having a family meal. Findings from this study contribute empirical understandings about families and family mealtime. Two families with children aged 2 to 10 years were observed as they accomplished their everyday mealtime activities. Data collection took place in the family homes where family members video recorded their naturally occurring mealtimes. Each family was provided with a video camera for a one-month period and they decided which mealtimes they recorded, a method that afforded participants greater agency in the data collection process and made available to the analyst a window into the unfolding of the everyday lives of the families. A total of 14 mealtimes across the two families were recorded, capturing 347 minutes of mealtime interactions. Selected episodes from the data corpus, which includes centralised breakfast and dinnertime episodes, were transcribed using the Jeffersonian system. Three data chapters examine extended sequences of family talk at mealtimes, to show the interactional resources used by members during mealtime interactions. The first data chapter explores multiparty talk to show how the uniqueness of the occasion of having a meal influences turn design. It investigates the ways in which members accomplish two-party talk within a multiparty setting, showing how one child "tells" a funny story to accomplish the drawing together of his brothers as an audience. As well, this chapter identifies the interactional resources used by the mother to cohort her children to accomplish the choralling of grace. The second data chapter draws on sequential and categorical analysis to show how members are mapped to a locally produced membership category. The chapter shows how the mapping of members into particular categories is consequential for social order; for example, aligning members who belong to the membership category "had haircuts" and keeping out those who "did not have haircuts". Additional interactional resources such as echoing, used here to refer to the use of exactly the same words, similar prosody and physical action, and increasing physical closeness, are identified as important to the unfolding talk particularly as a way of accomplishing alignment between the grandmother and grand-daughter. The third and final data analysis chapter examines topical talk during family mealtimes. It explicates how members introduce topics of talk with an orientation to their co-participant and the way in which the take up of a topic is influenced both by the sequential environment in which it is introduced and the sensitivity of the topic. Together, these three data chapters show aspects of how family members participated in family mealtimes. The study contributes four substantive themes that emerged during the analytic process and, as such, the themes reflect what the members were observed to be doing. The first theme identified how family knowledge was relevant and consequential for initiating and sustaining interaction during mealtime with, for example, members buying into the talk of other members or being requested to help out with knowledge about a shared experience. Knowledge about members and their activities was evident with the design of questions evidencing an orientation to coparticipant’s knowledge. The second theme found how members used topic as a resource for social interaction. The third theme concerned the way in which members utilised membership categories for producing and making sense of social action. The fourth theme, evident across all episodes selected for analysis, showed how children’s competence is an ongoing interactional accomplishment as they manipulated interactional resources to manage their participation in family mealtime. The way in which children initiated interactions challenges previous understandings about children’s restricted rights as conversationalists. As well as making a theoretical contribution, the study offers methodological insight by working with families as research participants. The study shows the procedures involved as the study moved from one where the researcher undertook the decisions about what to videorecord to offering this decision making to the families, who chose when and what to videorecord of their mealtime practices. Evident also are the ways in which participants orient both to the video-camera and to the absent researcher. For the duration of the mealtime the video-camera was positioned by the adults as out of bounds to the children; however, it was offered as a "treat" to view after the mealtime was recorded. While situated within family mealtimes and reporting on the experiences of two families, this study illuminates how mealtimes are not just about food and eating; they are social. The study showed the constant and complex work of establishing and maintaining social orders and the rich array of interactional resources that members draw on during family mealtimes. The family’s interactions involved members contributing to building the social orders of family mealtime. With mealtimes occurring in institutional settings involving young children, such as long day care centres and kindergartens, the findings of this study may help educators working with young children to see the rich interactional opportunities mealtimes afford children, the interactional competence that children demonstrate during mealtimes, and the important role/s that adults may assume as co-participants in interactions with children within institutional settings.

Towards lifelong navigation and mapping in an office environment

This paper addresses the challenge of developing robots that map and navigate autonomously in real world, dynamic environments throughout the robot’s entire lifetime – the problem of lifelong navigation. Static mapping algorithms can produce highly accurate maps, but have found few applications in real environments that are in constant flux. Environments change in many ways: both rapidly and gradually, transiently and permanently, geometrically and in appearance. This paper demonstrates a biologically inspired navigation algorithm, RatSLAM, that uses principles found in rodent neural circuits. The algorithm is demonstrated in an office delivery challenge where the robot was required to perform mock deliveries to goal locations in two different buildings. The robot successfully completed 1177 out of 1178 navigation trials over 37 hours of around the clock operation spread over 11 days.

Five senses digital stories

These digital stories were produced during a commercial research project with SLQ and Flying Arts. The works build on the research of Klaebe and Burgess related to variable workshop scenarios, and the institutional contexts of co-creative media. In this instance, research focused on the distributed digital storytelling workshop model; and the development of audiences for digital storytelling. The research team worked with regional artists whose work had been selected for inclusion in the Five Senses exhibition held at the State Library of Queensland to produce stories about their work; these works were then in turn integrated into the physical exhibition space. Location remoteness and timeline were factors in how the stories were made in a mix of individual meetings and remote correspondence (email &phone).

Competitive advantages as a foundation for social advantage: The role of social enterprise in regional development

The belief that regions play a role in determining national economic development and that advantages are found at the local and regional level has been the focus of economic geography and development studies over the last 10 years. However, this issue has historically been dominated by economic perspectives, industrial firms, and public bodies. In recent years the social economy is starting to receive greater attention in creating regional advantage as well as ameliorating regional disadvantage. The social economy includes the impact of the third sector such as social enterprises. This paper proposes that understanding the role and function of social enterprise will enable a more nuanced understanding of the socio-economic aspects of regional development. Drawing upon Oliver’s (1997) framework for sustainable competitive advantage it is argued that this established management framework provides a valuable foundation for examining the organisational resources that social enterprise need to operate effectively, as well as the socio-economic resources they produce for regional communities.