943 resultados para Piston engines.
Resumo:
Fishing inputs in the form of the netting materials, boats and outboard engines were issued to 20 fishermen on revolving loan basis at 2 centres - Shagunu. and Monai along the western bank of Kainji Lake, Nigeria. The agreement was that the recipients should sell all their catches to the Institute and surrender 20% as part payment of the loan, until they offset the loan after which the inputs would become theirs'. The scheme was monitored for 5 years during which time most recipients had completed payment. It was observed that adequate revenue could be made from the scheme provided there was effective supervision. A proposal has been made for large scale supply of fishing inputs to one hundred fishermen. The scheme is laudable as a means of improving the lot of the fishermen and implementing management proposals in water bodies through the recipients
Resumo:
The Cross River State (Nigeria) marine and freshwater artisanal capture fisheries are divided into 4 categories according to the type of resources being exploited. Schaefer's production model is applied to each of the fisheries to estimate the maximum sustainable yields (Ymax). The total potential yield for all the fisheries in natural waters is 178,650 tonnes/year. This potential is unlikely to be achieved as more fishermen are abandoning the occupation due to the scarcity of boats, outboard engines and nets. Even if the full potentials were realized the production would still be short of what the State should produce by about 30.5%. Investment opportunities which, if effected can help to narrow the gap between the available and the desired level of production are enumerated
Resumo:
The speciation of water in a variety of hydrous silicate glasses, including simple and rhyolitic compositions, synthesized over a range of experimental conditions with up to 11 weight percent water has been determined using infrared spectroscopy. This technique has been calibrated with a series of standard glasses and provides a precise and accurate method for determining the concentrations of molecular water and hydroxyl groups in these glasses.
For all the compositions studied, most of the water is dissolved as hydroxyl groups at total water contents less than 3-4 weight percent; at higher total water contents, molecular water becomes the dominant species. For total water contents above 3-4 weight percent, the amount of water dissolved as hydroxyl groups is approximately constant at about 2 weight percent and additional water is incorporated as molecular water. Although there are small but measurable differences in the ratio of molecular water to hydroxyl groups at a given total water content among these silicate glasses, the speciation of water is similar over this range of composition. The trends in the concentrations of the H-bearing species in the hydrous glasses included in this study are similar to those observed in other silicate glasses using either infrared or NMR spectroscopy.
The effects of pressure and temperature on the speciation of water in albitic glasses have been investigated. The ratio of molecular water to hydroxyl groups at a given total water content is independent of the pressure and temperature of equilibration for albitic glasses synthesized in rapidly quenching piston cylinder apparatus at temperatures greater than 1000°C and pressures greater than 8 kbar. For hydrous glasses quenched from melts cooled at slower rates (i.e., in internally heated or in air-quench cold seal pressure vessels), there is an increase in the ratio of molecular water to hydroxyl group content that probably reflects reequilibration of the melt to lower temperatures during slow cooling.
Molecular water and hydroxyl group concentrations in glasses provide information on the dissolution mechanisms of water in silicate liquids. Several mixing models involving homogeneous equilibria of the form H_2O + O = 20H among melt species have been explored for albitic melts. These models can account for the measured species concentrations if the effects of non-ideal behavior or mixing of polymerized units are included, or by allowing for the presence of several different types of anhydrous species.
A thermodynamic model for hydrous albitic melts has been developed based on the assumption that the activity of water in the melt is equal to the mole fraction of molecular water determined by infrared spectroscopy. This model can account for the position of the watersaturated solidus of crystalline albite, the pressure and temperature dependence of the solubility of water in albitic melt, and the volumes of hydrous albitic melts. To the extent that it is successful, this approach provides a direct link between measured species concentrations in hydrous albitic glasses and the macroscopic thermodynamic properties of the albite-water system.
The approach taken in modelling the thermodynamics of hydrous albitic melts has been generalized to other silicate compositions. Spectroscopic measurements of species concentrations in rhyolitic and simple silicate glasses quenched from melts equilibrated with water vapor provide important constraints on the thermodynamic properties of these melt-water systems. In particular, the assumption that the activity of water is equal to the mole fraction of molecular water has been tested in detail and shown to be a valid approximation for a range of hydrous silicate melts and the partial molar volume of water in these systems has been constrained. Thus, the results of this study provide a useful thermodynamic description of hydrous melts that can be readily applied to other melt-water systems for which spectroscopic measurements of the H-bearing species are available.
Resumo:
This dissertation consists of three parts. In Part I, it is shown that looping trajectories cannot exist in finite amplitude stationary hydromagnetic waves propagating across a magnetic field in a quasi-neutral cold collision-free plasma. In Part II, time-dependent solutions in series expansion are presented for the magnetic piston problem, which describes waves propagating into a quasi-neutral cold collision-free plasma, ensuing from magnetic disturbances on the boundary of the plasma. The expansion is equivalent to Picard's successive approximations. It is then shown that orbit crossings of plasma particles occur on the boundary for strong disturbances and inside the plasma for weak disturbances. In Part III, the existence of periodic waves propagating at an arbitrary angle to the magnetic field in a plasma is demonstrated by Stokes expansions in amplitude. Then stability analysis is made for such periodic waves with respect to side-band frequency disturbances. It is shown that waves of slow mode are unstable whereas waves of fast mode are stable if the frequency is below the cutoff frequency. The cutoff frequency depends on the propagation angle. For longitudinal propagation the cutoff frequency is equal to one-fourth of the electron's gyrofrequency. For transverse propagation the cutoff frequency is so high that waves of all frequencies are stable.
Resumo:
Since 1993, annual frame surveys have been conducted by the Nigerian-German Kainji Lake Fisheries Promotion Project to determine the distribution and number of fishing localities, fishing canoes and fishing gears around Kainji Lake, Nigeria. The total number of fishing localities has increased from 221 in 1993 to 286 in 1996. The fishing localities included 245 permanent fishing villages, 29 permanent fishing camps, 8 temporary fishing camps (with fishermen from Kainji Lake) and 4 temporary fishing camps (with fishermen from outside Kainji Lake area). There was an increase in the total number of fishing entrepreneurs, fishing assistants and fishing canoes over the years. A total number of 5,499 fishing entrepreneurs, 12,449 fishing assistants and 9,278 fishing canoes were recorded during the 1996 frame survey. From 1995 there was a decrease in the number of shoreline fisherfolk and a decrease in the number of transport canoes, the number of engines remained the same. During the 1996 survey, a total number of 18,655 gill nets, 1,560 drift nets, 753 beach seines, 5,548 cast nets, 7,400 longlines and 36,979 traps were recorded. The concentration of the gears (number per km shoreline) was highest in substrata 06 and 08. The total number of gill nets increased from 17,680 in 1995 to 18,655 in 1996. For the remaining 5 gear types a decrease in number was observed. Despite increasing numbers of gears on the lake, of concern is the decline recorded in all the fishing methods of the number of gears owned by individual entrepreneurs. This was most notable in the gill net and longline fisheries. These two fisheries have the lowest daily catch values and coupled with the problem of gear theft on the lake, ownership in future, may be expected to fall further. The number of larger fishing units also declined as did the number of gears new entrants enter the fishery with. The decline is particularly worrying for the beach seine fishery where diversification into other fishing methods would be beneficial in light of the present ban on seines. The group of not active fishing entrepreneurs (those who do not themselves participate in fishing activities) had the highest ownership of gears whilst the new entrants into the fishery had the lowest. There was evidence that these new entrants into the fishery were using cast nets which is worrying given the trend of using smaller mesh size of this gearSince 1993, annual frame surveys have been conducted by the Nigerian-German Kainji Lake Fisheries Promotion Project to determine the distribution and number of fishing localities, fishing canoes and fishing gears around Kainji Lake, Nigeria. The total number of fishing localities has increased from 221 in 1993 to 286 in 1996. The fishing localities included 245 permanent fishing villages, 29 permanent fishing camps, 8 temporary fishing camps (with fishermen from Kainji Lake) and 4 temporary fishing camps (with fishermen from outside Kainji Lake area). There was an increase in the total number of fishing entrepreneurs, fishing assistants and fishing canoes over the years. A total number of 5,499 fishing entrepreneurs, 12,449 fishing assistants and 9,278 fishing canoes were recorded during the 1996 frame survey. From 1995 there was a decrease in the number of shoreline fisherfolk and a decrease in the number of transport canoes, the number of engines remained the same. During the 1996 survey, a total number of 18,655 gill nets, 1,560 drift nets, 753 beach seines, 5,548 cast nets, 7,400 longlines and 36,979 traps were recorded. The concentration of the gears (number per km shoreline) was highest in substrata 06 and 08. The total number of gill nets increased from 17,680 in 1995 to 18,655 in 1996. For the remaining 5 gear types a decrease in number was observed. Despite increasing numbers of gears on the lake, of concern is the decline recorded in all the fishing methods of the number of gears owned by individual entrepreneurs. This was most notable in the gill net and longline fisheries. These two fisheries have the lowest daily catch values and coupled with the problem of gear theft on the lake, ownership in future, may be expected to fall further. The number of larger fishing units also declined as did the number of gears new entrants enter the fishery with. The decline is particularly worrying for the beach seine fishery where diversification into other fishing methods would be beneficial in light of the present ban on seines. The group of not active fishing entrepreneurs (those who do not themselves participate in fishing activities) had the highest ownership of gears whilst the new entrants into the fishery had the lowest. There was evidence that these new entrants into the fishery were using cast nets which is worrying given the trend of using smaller mesh size of this gear. (PDF contains 44 pages)
Resumo:
This study was conducted to assess the impact of Nigerian Agricultural, Co-operative and Rural Development Bank Loan on beneficiaries and non-beneficiaries fishermen in Lake Kainji. A total of fifty fishermen (25 beneficiaries and 25 non-beneficiaries) were randomly selected from five fishing villages along the lake basin. Data collected were scored and the percentages of the parameters were calculated appropriately. The types of loans disbursed to beneficiaries revealed that 52% was cash and 48% was in kind. The credit package ranged between N5, 000 to N150, 000 only. Only 48% of the loans granted were paid while the rest remained unpaid. The results obtained from the membership of fishermen Cooperative showed that 64% of beneficiaries were members while 36% were non-members. Also 36% of non-beneficiaries were members while 64% were not. The Common fishing gears used by the two categories of fishermen include gillnets longline, castnet and driftnets. Sixty percent of beneficiaries and 8% of non-beneficiaries fishermen were using canoe with outboard engines while the rest used canoes with paddles. Beneficiaries earned a higher income (N1, 000 to N9, 000) daily than non-beneficiaries (N1, 000 to N6, 000) daily from sales of fish caught. Major contrainsts to increased catch and income identified include inadequate capital, non- availability of fishing inputs, stealing of fishing gears, lack of access to credit facilities and menace of stump and water hyacinth in the lake. Lastly, recommendation were made for the bank management, government and other lending institutions on how to improve the livelihood of the Artisanal fishermen by increasing the loan usually granted
Resumo:
Biological machines are active devices that are comprised of cells and other biological components. These functional devices are best suited for physiological environments that support cellular function and survival. Biological machines have the potential to revolutionize the engineering of biomedical devices intended for implantation, where the human body can provide the required physiological environment. For engineering such cell-based machines, bio-inspired design can serve as a guiding platform as it provides functionally proven designs that are attainable by living cells. In the present work, a systematic approach was used to tissue engineer one such machine by exclusively using biological building blocks and by employing a bio-inspired design. Valveless impedance pumps were constructed based on the working principles of the embryonic vertebrate heart and by using cells and tissue derived from rats. The function of these tissue-engineered muscular pumps was characterized by exploring their spatiotemporal and flow behavior in order to better understand the capabilities and limitations of cells when used as the engines of biological machines.
Resumo:
From the steam turbines which provide most of our electricity to the jet engines which have shrunk our World, turbomachines undoubtedly play a major role in life today. Competition in the turbomachinery industry is fiercely strong [Wisler, 1998], hence good aerodynamic design is vital. However, with efficiency levels already close to their theoretical maxima, companies are increasingly looking to reduce costs and increase reliability through improved design practice. Computational Fluid Dynamics (CFD) can make a strong contribution to assisting this process as it has the potential to increase performance while reducing cost. The situation is, however, complicated by an ever decreasing number of engineers with sufficient design experience to reap the full benefits offered by CFD. With the large risks involved, novice designers of today are increasingly confined to refining old designs rather than gaining experience, like their forebears, through 'clean sheet' exercises. Hence it is desirable to capture the knowledge and experience of older designers, before it is lost, to assist the engineers of tomorrow. It is therefore the aim of this project to produce a design support tool which will not only store the appropriate CFD codes, but also provide a dynamic signpost (based on elicited knowledge and experience) to advise the engineer in their use. The signposting methodology developed for the aerospace industry [Clarkson and Hamilton, 1997] will provide the basic framework for the tool. This paper reviews current turbomachinery design practice (including an examination of the relevant CFD) in order to establish the important issues which a support tool must address. Current design support methodologies and their propriety are then reviewed, followed by a detailed description of the signposting concept. It then sets out a clear statement of the objectives for the research and the methods proposed to meet them. The paper concludes with a timetable of the work.
Resumo:
The steady state ion acceleration at the front of a cold solid target by a circularly polarized flat-top laser pulse is studied with one-dimensional particle-in-cell (PIC) simulation. A model that ions are reflected by a steady laser-driven piston is used by comparing with the electrostatic shock acceleration. A stable profile with a double-flat-top structure in phase space forms after ions enter the undisturbed region of the target with a constant velocity. (C) 2007 Elsevier B.V. All rights reserved.