The use of extruded feed in fish food

In our country, the intensive culture of fish has been making progress due to the availability of extruded rations, which are characterized by the way they have been formulated to assist the nutritional demands of the tropical species and for facilitating a better practice of alimentary handling. This process checks the extruded product density and the desirable physical/chemical aspects to a diet that should be handled in the water, the critical factor of this activity. It is important to emphasize that this product stays to the surface of the water, facilitates the consumption control and the observation of the general aspects of the school of fish, as well as guaranteeing that no deterioration of the physical/chemical characteristics of the water occurs. The floating characteristic of the extruded ration is preferable for farmers because most of the tropical species feed at the surface of the water. In some cases, in the function of the alimentary habit, the thermal conditions of the water and the handling system produce granules with different densities. This is due to the humidity and the applied cooking heat, which modifies the time of hydration, and consequently the ability to float. To establish the physical presentation idea for a ration for tropical fishes, it is necessary that the pellets come in sizes, textures, humidities and densities in order to allow for the different phases of the lives of the fishes. This ration should be the result of characteristics of the species, such as the anatomophysiologics particularities, alimentary habits, digestive capacity and alimentary behavior. Only in this way is it possible to offer to those fishes a ration whose nutritious value and physical presentation facilitate the best biological and economic answers.Those aspects need to be reviewed because the tropical species that are cultivated in our country present selective behavior in relation to the size of the pellet. Generally, this has access to the digestive system without waste; the digestibility, therefore, is dependent upon the size of the particles and the physical aspects of the pellets. They should still consider that those granules could be less abrasive and softer. The extruded rations available in the national market present a qualitative reference to its proteic level, whose consequence allows us to infer that those are overestimated for the final phase of those fishes. Thus, the final cost of production is made unfeasible. In this point of view of the development of the national fish culture, and the growing adoption of the intensive system of production, it can link that such progress is a function of the availability of the rations in the extruded form. Although this technique of processing of rations has revolutionized the market in such a way that has been seen as preferable for farmers, some feel that there is a lack of products best suited for the initial phases of fingerlings production.

Effect of rinsing with water immediately after APF gel application on enamel demineralization in situ

This double-blind crossover in situ study evaluated the effect of rinsing with water immediately after the application of acidulated phosphate fluoride (APF) on enamel demineralization. APF application was followed by: no rinsing or consuming of liquids or solids for the next 30 min; immediately washing with water jet or drinking of a glass of water. All treatments showed a statistically significant decrease in enamel mineral loss compared to the control (p < 0.05), but the differences among treatments were not significant (p > 0.05). The data suggest that the recommendation of asking patients to refrain from drinking water following professional APF application does not seem to have an influence on the anticaries effect of fluoride. Copyright (C) 2005 S. Karger AG, Basel.

Electroluminescence of zinc oxide thin-films prepared via polymeric precursor and via sol-gel methods

Zinc oxide (ZnO) is an electroluminescent (EL) material that can emit light in different regions of electromagnetic spectrum when electrically excited. Since ZnO is chemically stable, inexpensive and environmentally friendly material, its EL property can be useful to construct solid-state lamps for illumination or as UV emitter. We present here two wet chemical methods to prepare ZnO thin-films: the Pechini method and the sol-gel method, with both methods resulting in crystalline and transparent films with transmittance > 85% at 550 nm. These films were used to make thin-film electroluminescent devices (TFELD) using two different insulator layers: lithium fluoride (LiF) or silica (SiO2). All the devices exhibit at least two wide emission bands in the visible range centered at 420 nm and at 380 nm attributed to the electronic defects in the ZnO optical band gap. Besides these two bands, the device using SiO2 and ZnO film obtained via sol-gel exhibits an additional band in the UV range centered at 350 nm which can be attributed to excitonic emission. These emission bands of ZnO can transfer their energy when a proper dopant is present. For the devices produced the voltage-current characteristics were measured in a specific range of applied voltage. (C) 2007 Elsevier B.V. All rights reserved.

Biomass production and secretion of hydrolytic enzymes are influenced by the structural complexity of the nitrogen source in Fusarium oxysporum and Aspergillus nidulans

The structural complexity of the nitrogen sources strongly affects biomass production and secretion of hydrolytic enzymes in filamentous fungi. Fusarium oxysporum and Aspergillus nidulans were grown in media containing glucose or starch, and supplemented with a nitrogen source varying from a single ammonium salt (ammonium sulfate) to free amino acids (casamino acids), peptides (peptone) and protein (gelatin). In glucose, when the initial pH was adjusted to 5.0, for both microorganisms, higher biomass production occurred upon supplementation with a nitrogen source in the peptide form (peptone and gelatin). With a close to neutrality pH, biomass accumulation was lower only in the presence of the ammonium salt. When grown in starch, biomass accumulation and secretion of hydrolytic enzymes (amylolytic and proteolytic) by Fusarium also depended on the nature of the nitrogen supplement and the pH. When the initial pH was adjusted to 5.0, higher growth and higher amylolytic activities were detected in the media supplemented with peptone, gelatin and casamino acids. However, at pH 7.0, higher biomass accumulation and higher amylolytic activities were observed upon supplementation with peptone or gelatin. Ammonium sulfate and casamino acids induced a lower production of biomass, and a different level of amylolytic enzyme secretion: high in ammonium sulfate and low in casamino acids. Secretion of proteolytic activity was always higher in the media supplemented with peptone and gelatin. Aspergillus, when grown in starch, was not as dependent as Fusarium on the nature of nitrogen source or the pH. The results described in this work indicate that the metabolism of fungi is regulated not only by pH, but also by the level of structural complexity of the nitrogen source in correlation to the carbon source.

In vitro evaluation of the effectiveness of acidic fluoride dentifrices

This study evaluated the effectiveness of acidic low-fluoride dentifrices compared to conventional neutral dentifrices. Enamel blocks were submitted to pH cycling and treatment with slurries of dentifrices containing 0, 275, 412, 550 and 1,100 mu g F/g (pH 4.5 or 7.0), and also a commercial dentifrice (1,100 mu g F/g) and a commercial children's dentifrice (500 mu g F/ g). Variations in surface microhardness and in the mineral content in enamel after pH cycling were calculated. Enamel blocks treated with acidic dentifrices exhibited less mineral loss compared to neutral dentifrices (ANOVA; p < 0.05). The acidic dentifrices with 412 and 550 mu g F/g had the same effectiveness as the neutral 1,100-mu g F/g dentifrice and commercial 1,100-mu g F/g dentifrice. Copyright (c) 2007 S. Karger AG, Basel

Bone regeneration at implants placed into extraction sockets of maxillary incisors in dogs

AimTo compare the influence of autologous or deproteinized bovine bone mineral as grafting material on healing of buccal dehiscence defects at implants installed immediately into the maxillary second incisor extraction socket in dogs.Material and methodsIn the maxillary second incisor sockets of 12 Labrador dogs, implants were installed immediately following tooth extraction. A standardized buccal defect was created and autologous bone particles or deproteinized bovine bone mineral were used to fill the defects. A collagen membrane was placed to cover the graft material, and the flaps were sutured to fully submerge the experimental areas. Six animals were sacrificed after 2 months, and six after 4 months of healing. Ground sections were obtained for histological evaluation.ResultsAfter 2 months of healing, all implants were osseointegrated. All buccal dehiscence defects were completely filled after 2 months irrespective of the augmentation material (autologous bone or Bio-Oss (R)) applied. Bone-to-implant contact (BIC) on the denuded implant surfaces was within a normal range of 30-40%. However, the newly formed tissue at 2 months was partially resorbed (> 50% of the area measurements) after 4 months.ConclusionsApplying either autologous bone or deproteinized bovine bone mineral to dehiscences at implants installed immediately into extraction sockets resulted in high degree of regeneration of the defects with satisfactory BIC on the denuded implant surface.To cite this article:De Santis E, Botticelli D, Pantani F, Pereira FP, Beolchini M, Lang NP. Bone regeneration at implants placed into extraction sockets of maxillary incisors in dogs.Clin. Oral Impl. Res. 22, 2011; 430-437.

First record of L-quebrachitol in Allophylus edulis (Sapindaceae)

Allophylus edulis, commonly called 'Chal chal', is a member of the Sapindaceae occurring in the Uruguayan and Brazilian native flora. During the phytochemical analysis of two Chal chal specimens from two welldifferentiated geographical zones (Assis, São Paulo, Brazil, and Santa Lucia, Canelones, Uruguay), considerable amounts of L-quebrachitol were isolated from both samples. The isolation was carried out from the ethanolic twig extracts obtained by maceration of both vegetal samples. White easily distinguishable crystals were mechanically separated, washed, and characterized by 1D and 2D NMR experiments and by MS data. Such techniques confirmed that the crystals isolated from sources collected in both countries resulted in the same compound, L-quebrachitol, a natural product not previously reported for this species and one that has been investigated as a sugar substitute for diabetics. Worthy of note, the content of L-quebrachitol in A. edulis may be the chemical basis to explain its ethnobotanical uses, since infusions of this plant are used to treat diabetes in the practice of local traditional medicine. (c) 2008 Elsevier Ltd. All rights reserved.

Argilominerais de Coberturas Sedimentares Cenozóicas do Centro-leste do Estado de São Paulo

Clay mineral analysis contributed to the mineralogical characterization and stratigraphic setting of continental Cenozoic deposits of central-eastern portion of São Paulo State, southeastern Brazil. These deposits, often thin and discontinuous, comprise the Itaqueri Formation (Cretaceous-Paleogene), Rio Claro Formation (Pliocene) and associated Neocenozoic deposits. X-ray diffractometry provided mineralogical and semiquantitative constitution of clays, while scanning electron microscopy (SEM) provided details about mineralogical constitution, packing of microscopic grains and nature (detrital or diagenetic) of clays. These results supported interpretations about paleoenvironmental conditions during sedimentation, revealing possible links between changing climates (dry or humid) and correlative Cenozoic deposits in southeastern Brazil. In addition, SEM images showed microstructures which influence on geotechnical behaviour (erosion and collapse phenomena) of sedimentary materials.

The silent period in patients with chronic renal failure undergoing hemodialysis

Silent period was evaluated in 20 adult male patients with chronic renal failure undergoing hemodialysis. Readings were obtained by supramaximal stimulus to the median nerve, during maximum isometric effort of the abductor pollicis brevis muscle against resistance. Two types of abnormalities were observed, motor neuron hypoexcitability with elongated silent period, and motor neuron hyperexcitability with reduction or absence of silent period. Some abnormalities are probably linked with dialysis duration, but show no correlation to presence or absence of peripheral neuropathy. The silent period alterations described in this study could possibly correlate with some other clinical feature frequently seen in patients with chronic renal failure such as hypereflexia of the deep tendon reflexes.

La última palabra en dosis mínima

In this article we rewiewed the indications of the low-dose hormone replacement therapy in post menopausal women. We evaluate the effects of this therapy on menopausal symptoms bone metabolism, cardiovascular risk and endometrial cancer. The low-dose hormone replacement therapy is satisfactory to relief menopausal symptoms and improves lipid profile preventing atherosclerosis. It does not increase the risk of hyperplasia or endometrial cancer when is associate with progestagens. The low dose hormone replacement therapy is also associate to improve bone mineral density but to have better comprehension about the effective action of the low dose hormone replacement therapy on bone, more studies evaluating the risk of fractures are necessary.

Nutritional support and outcome in hospitalized dogs and cats

This study investigated the effect of assisted nutritional support on the outcome and time of hospitalization (TH) of dogs and cats. The study compared two groups of 400 hospitalized animals. The animals in group 1 did not receive assisted nutritional support because they were hospitalized before the clinical nutrition service was implemented; animals in group 2 were nutritionally managed. Animals in group 1 received a low-cost diet with no consumption control. Group 2 animals had their maintenance energy requirement (MER) calculated, received a high-protein and high-energy super-premium diet, had their caloric intake (CI) monitored, and received enteral and parenteral nutritional support when necessary. The statistical analysis of the results included the standard T test (group 1 versus group 2) and chisquare and Spearman's correlation to evaluate group 2 (CI and outcome, body condition score (BCS) and outcome, BCS and CI). For group 2, favorable outcome (FO), defined as the percent responding to therapy and dis-charged from the hospital, was 83%, and the TH was 8.59 days. These values were lower (P < .001) for group 1 (63.2% FO and TH of 5.7 days). For group 2, 65.5% of the animals received voluntary consumption (93.1% outcome), 14.5% received enterai support (67.9% FO), 6.5% received parenteral support (68% FO), and 6.17% did not eat (38.5% FO), demonstrating an association between the type of nutritional support and outcome (P < .01). Group 2 animals that received 0% to 33% of their MER had 62.9% FO, and those receiving more than 67% had 94.3% FO, which shows that lower mortality rates are associated with higher CI (P < .001). TH was higher for animals with higher CI (P < .001). The BCS did not correlate with Cl (P > .05) but did correlate with outcome (P < .01). FO was 68.7% for animals with low BCS, 85.7% for animals with ideal BCS, and 86.6% for overweight animals. Nutritional support could allow for longer therapies, thus increasing the TH and FO rate.

Agronomic effectiveness of cationic phosphate impurities present in superphosphate fertilizers as affected by soil pH

The general concept that low-water-soluble phosphorus (P) fertilizers should be more agronomically effective when applied to acidic soils was developed based on sources containing mainly calcium (Ca)-P compounds, but it may not hold true for sources with different chemical composition. To obtain information related to this issue, two important iron (Fe)-potassium (K)-P compounds present in superphosphates [Fe 3 KH 8 (PO 4 ) 6·6H 2 O, H8, and Fe 3 KH 14 (PO 4 ) 8·4H 2 O, H14] were prepared and characterized. These P sources were used to provide 30 and 60 mg P kg -1 as neutral ammonium citrate (NAC)+H 2 O-soluble P. Reagent-grade monocalcium phosphate (MCP) was used as a standard P source with high water solubility with an additional rate of 120 mg P kg -1 included. Also, mixtures of both Fe-K-P compounds and MCP were prepared to provide 0, 25, 50, 75, and 100% of the total P as MCP. All sources were applied to a clayey loamy acid soil (pH 5.3) classified as Rhodic Kanhapludult. The soil was incubated at two rates (0 and 10 g kg -1 ) of lime, which resulted in pH 5.4 and 6.8. Upland rice was cultivated to maturity. The H14 compound confirmed to be a highly effective source of P for the rice plants at both soil pH, as opposed to the H8, which was poorly effective when applied alone. When mixed with water-soluble P (WSP), the H8 was able to provide P to the plants with the maximum yield of upland rice reached with 54.8 and 80.5% of WSP for pH 5.4 and 6.8, respectively. The high agronomic performance of the H14 compound clearly indicates that this low-water-soluble P source cannot be deemed as ineffective at high soil pH. Copyright © Taylor & Francis Group, LLC.

Potential anticariogênico de soluções aciduladas com baixa concentração flúor

Objetives: The aim of this study was to verify the anticariogenic effect of acidulate solutions with low NaF concentration, using pH-cycling model and bovine enamel. Material and methods: Enamel blocks were submitted to the surface microhardness (SMH) test and randomly divided in 12 experimental and one placebo groups. The blocks were submitted to pH cycling for 7 days, with daily applications once/day of 0.05% NaF and 0.1% NaF and twice/day of 0.02% NaF solutions. Four different pH: 4.0. 5.0, 6.0 and 7.0 were used. Next, SMH test was again used to determine the surface microhardness percentage change (%SMH). Data obtained for %SMH were homogeneous and passed through variance analyses and Tukey's test (5%) as far as fluoride concentrations and pH. Resulls:The results showed that pH influenced %SMH in 0.02% NaF and 0.05% NaF solutions with pH 4.0, which had less mineral loss compared to pH 7.0 (p̃0.05). The 0.02% NaF - pH 4.0, and 0.05% NaF- pH 7.0 groups showed similar results (p>0.05). A dose-response relationship was observed among the tested solutions, with better anticariogenic effect for the 0.1% NaF solution. Conclusion: The results suggest that the addition of citric acid to acidulate mouth rinses reduce mineral loss.

Análise morfotectônica da Bacia do rio Santo anastácio, sp, através de parâmetros fluviomorfométricos e de registros paleossísmicos

Fluvial morphometry is method of great value regarding neotectonic analysis of extensive areas because streams, besides representing one of the main agents in the relief modeling, quickly adjust their thalwegs to even the most gentle crustal deformations. The purpose of this paper is to present the application of some morphometric techniques in the Santo Anastácio River hydrographic basin in order to identify recent tectonic deformations. Additionally, we show liquefaction structures identified in the basin and interpreted here as seismites linked to ancient earthquakes (magnitudes greater than 5). The morphometric survey includes longitudinal stream profile analysis, RDE (declivity versus stream length) index application, and the sinuosity study of the Santo Anastácio River channel. Geologic substrate comprises Cretaceous siliciclastic rocks of the Caiuá and Bauru groups, locally covered by Cenozoic sediments (alluvial plains, terrace deposits, colluvial aprons, as well as in situ regoliths). Considering that liquefaction structures affect dark clay layers of 32.340±320 year BP age (14C dating), a lower age limit for the ancient earthquake is triggered in that region. The authors believe that neotectonic understanding of the Western São Paulo State Plateau is important to the geologic and geomorphologic evolution of that landscape and to the consequent territorial planning and occupation.

Cutting performance of diamond coated Si3N4 tool during turning

Silicon nitride cutting tools have been used successfully for machining hard materials, like: cast irons, nickel based alloys, etc. However these cutting tools with diamond coating present little information on dry turning operations of gray cast iron. In the present work, Si3N4 square inserts was developed, characterized and subsequently coated with diamond for dry machining operations on gray cast iron. All experiments were conducted with replica. It was used a 1500, 3000, 4500 m cutting length, feed rate of 0.33 mm/rev and keeping the depth of cut constant and equal to 1 mm. The results show that wear in the tool tips of the Si3N4 inserts, in all cutting conditions, was caused by both mechanical and chemical processes. To understand the tool wear mechanisms, a morphological analysis of the inserts, after experiments, has been performed by SEM and optical microscopy. Diamond coated PVD inserts showed to be capable to reach large cutting lengths when machining gray cast iron. © (2010) Trans Tech Publications.