Peer Instruction method in introductory math courses

Learning is not a spectator’s sport. Students do not learn much by just sitting in class listening their teachers, memorizing pre-packaged assignments and spitting out answers. The teaching-learning process has been a constant target of studies, particularly in Higher Education, in consequence of the annual increase of new students. The concern with maintaining a desired quality level in the training of these students, conjugated with the will to widen the access to all of those who finish Secondary School Education, has triggered a greater intervention from the education specialists, in partnership with the teachers of all Higher Education areas, in the analysis of this problem. Considering the particular case of Engineering, it has been witnessed a rising concern with the active learning strategies and forms of assessment. Research has demonstrated that students learn more if they are actively engaged with the material they are studying. In this presentation we describe, present and discuss the techniques and the results of Peer Instruction method in an introductory Calculus courses of an Engineering Bach

Data mining techniques contributions to support electrical vehicle demand response

The introduction of Electric Vehicles (EVs) together with the implementation of smart grids will raise new challenges to power system operators. This paper proposes a demand response program for electric vehicle users which provides the network operator with another useful resource that consists in reducing vehicles charging necessities. This demand response program enables vehicle users to get some profit by agreeing to reduce their travel necessities and minimum battery level requirements on a given period. To support network operator actions, the amount of demand response usage can be estimated using data mining techniques applied to a database containing a large set of operation scenarios. The paper includes a case study based on simulated operation scenarios that consider different operation conditions, e.g. available renewable generation, and considering a diversity of distributed resources and electric vehicles with vehicle-to-grid capacity and demand response capacity in a 33 bus distribution network.

A simulation tool for demand response programs implementation

The design and development of simulation models and tools for Demand Response (DR) programs are becoming more and more important for adequately taking the maximum advantages of DR programs use. Moreover, a more active consumers’ participation in DR programs can help improving the system reliability and decrease or defer the required investments. DemSi, a DR simulator, designed and implemented by the authors of this paper, allows studying DR actions and schemes in distribution networks. It undertakes the technical validation of the solution using realistic network simulation based on PSCAD. DemSi considers the players involved in DR actions, and the results can be analyzed from each specific player point of view.

LMP triggered real time demand response events

Recent changes in power systems mainly due to the substantial increase of distributed generation and to the operation in competitive environments has created new challenges to operation and planning. In this context, Virtual Power Players (VPP) can aggregate a diversity of players, namely generators and consumers, and a diversity of energy resources, including electricity generation based on several technologies, storage and demand response. Demand response market implementation has been done in recent years. Several implementation models have been considered. An important characteristic of a demand response program is the trigger criterion. A program for which the event trigger depends on the Locational Marginal Price (LMP) used by the New England Independent System operator (ISO-NE) inspired the present paper. This paper proposes a methodology to support VPP demand response programs management. The proposed method has been computationally implemented and its application is illustrated using a 32 bus network with intensive use of distributed generation. Results concerning the evaluation of the impact of using demand response events are also presented.

Study on influence of the new CoDeSys V3.0 on the existing CoDeSys discipline of the Mind8 Engineering Center

CoDeSys "Controller Development Systems" is a development environment for programming in the area of automation controllers. It is an open source solution completely in line with the international industrial standard IEC 61131-3. All five programming languages for application programming as defined in IEC 61131-3 are available in the development environment. These features give professionals greater flexibility with regard to programming and allow control engineers have the ability to program for many different applications in the languages in which they feel most comfortable. Over 200 manufacturers of devices from different industrial sectors offer intelligent automation devices with a CoDeSys programming interface. In 2006, version 3 was released with new updates and tools. One of the great innovations of the new version of CoDeSys is object oriented programming. Object oriented programming (OOP) offers great advantages to the user for example when wanting to reuse existing parts of the application or when working on one application with several developers. For this reuse can be prepared a source code with several well known parts and this is automatically generated where necessary in a project, users can improve then the time/cost/quality management. Until now in version 2 it was necessary to have hardware interface called “Eni-Server” to have access to the generated XML code. Another of the novelties of the new version is a tool called Export PLCopenXML. This tool makes it possible to export the open XML code without the need of specific hardware. This type of code has own requisites to be able to comply with the standard described above. With XML code and with the knowledge how it works it is possible to do component-oriented development of machines with modular programming in an easy way. Eplan Engineering Center (EEC) is a software tool developed by Mind8 GmbH & Co. KG that allows configuring and generating automation projects. Therefore it uses modules of PLC code. The EEC already has a library to generate code for CoDeSys version 2. For version 3 and the constant innovation of drivers by manufacturers, it is necessary to implement a new library in this software. Therefore it is important to study the XML export to be then able to design any type of machine. The purpose of this master thesis is to study the new version of the CoDeSys XML taking into account all aspects and impact on the existing CoDeSys V2 models and libraries in the company Harro Höfliger Verpackungsmaschinen GmbH. For achieve this goal a small sample named “Traffic light” in CoDeSys version 2 will be done and then, using the tools of the new version it there will be a project with version 3 and also the EEC implementation for the automatically generated code.

O programa de formação dos mentores: conceção e planeamento

Este texto define e enquadra teoricamente as principais finalidades e orientações metodológicas do programa de formação dos mentores que acompanharam os professores em período probatório. O referencial de formação dos mentores construiu-se em torno das diferentes dimensões do ato de ensinar. A metodologia de formação organizou-se a partir do conceito de desenvolvimento profissional, considerando o mentor como objeto e sujeito da formação e procurando articular o processo formativo e o trabalho de supervisão desenvolvido pelos mentores, no terreno. As sessões de formação foram planeadas estrategicamente a partir de questões orientadoras às quais se procurou dar resposta através de um conjunto de atividades e materiais. Durante a implementação do período probatório foi produzido pelos intervenientes um conjunto considerável de documentos que foram trabalhados durante a formação. - Abstract This article defines and frames theoretically the main purposes and the methodological guidelines of the training program of mentors who have accompanied teachers on the probationary period. Those guidelines were constructed around the different dimensions of the act of teaching. The training methodology was organized from the concept of professional development, considering the mentor as object and subject of training and seeking to articulate the formative process and supervision work developed by mentors on the field. Training sessions have been strategically planned from guiding questions which sought to respond through a range of activities and materials. During the implementation of the probationary period, the participants delivered a considerable set of documents, which were worked on during training.- Resumen Este texto define y enfoca teóricamente las principales finalidades y orientaciones metodológicas del programa de formación de los mentores que acompañaron a los profesores en el periodo probatorio. La referencia formativa de los mentores se construyó en torno de las distintas dimensiones del hecho de enseñar. La metodología formativa se organizó a partir del concepto de desarrollo profesional, considerando al mentor como objeto y sujeto de la formación y buscando articular el proceso formativo y el trabajo de supervisión desarrollado por los mentores, en el terreno. Las sesiones de formación se proyectaron estratégicamente a partir de planteos orientadores, a los cuales se les dio respuesta a través de un conjunto de actividades y materiales. Durante la implementación del periodo probatorio, los participantes produjeron un considerable conjunto de documentos que se elaboraron durante la formación.

Towards the wide implementation of standards IEC 61968/70 (CIM) and IEC 61850 in the distribution system (CIGRÉ C6-105_2010)

Currently, power systems (PS) already accommodate a substantial penetration of distributed generation (DG) and operate in competitive environments. In the future, as the result of the liberalisation and political regulations, PS will have to deal with large-scale integration of DG and other distributed energy resources (DER), such as storage and provide market agents to ensure a flexible and secure operation. This cannot be done with the traditional PS operational tools used today like the quite restricted information systems Supervisory Control and Data Acquisition (SCADA) [1]. The trend to use the local generation in the active operation of the power system requires new solutions for data management system. The relevant standards have been developed separately in the last few years so there is a need to unify them in order to receive a common and interoperable solution. For the distribution operation the CIM models described in the IEC 61968/70 are especially relevant. In Europe dispersed and renewable energy resources (D&RER) are mostly operated without remote control mechanisms and feed the maximal amount of available power into the grid. To improve the network operation performance the idea of virtual power plants (VPP) will become a reality. In the future power generation of D&RER will be scheduled with a high accuracy. In order to realize VPP decentralized energy management, communication facilities are needed that have standardized interfaces and protocols. IEC 61850 is suitable to serve as a general standard for all communication tasks in power systems [2]. The paper deals with international activities and experiences in the implementation of a new data management and communication concept in the distribution system. The difficulties in the coordination of the inconsistent developed in parallel communication and data management standards - are first addressed in the paper. The upcoming unification work taking into account the growing role of D&RER in the PS is shown. It is possible to overcome the lag in current practical experiences using new tools for creating and maintenance the CIM data and simulation of the IEC 61850 protocol – the prototype of which is presented in the paper –. The origin and the accuracy of the data requirements depend on the data use (e.g. operation or planning) so some remarks concerning the definition of the digital interface incorporated in the merging unit idea from the power utility point of view are presented in the paper too. To summarize some required future work has been identified.

Programa de manutenção de aeronaves das companhias de aviação de baixo custo

Este trabalho aborda o Programa de Manutenção de Aeronaves das companhias de aviação de baixo custo, tendo como foco a análise e identificação dos requisitos legais e das metodologias de desenvolvimento de um Programa de Manutenção de uma aeronave e a comparação dos custos de manutenção de companhias de baixo custo com as companhias regulares. A aplicação eficaz de um programa de manutenção, para além de reduzir os seus custos, tem um impacto positivo na segurança, economia da manutenção e na fiabilidade de despacho. A metodologia utilizada foi a análise de informação de publicações e artigos. Com base na revisão de literaturas especializadas, fez-se uma selecção dos diversos aspectos necessários para se obter um Programa de Manutenção, o que permitiu construir o caso de estudo e efectuar a análise dos custos inerentes de manutenção de um operador aéreo de baixo custo e de um operador aéreo regular. Os resultados da análise permitiram chegar a veracidade da hipótese de que do ponto de vista de manutenção é igualmente seguro ou não seguro voar numa companhia de baixo custo e numa companhia regular, assim independentemente do tipo de companhia, ambas devem cumprir os requisitos para aprovação do PMA imposto pela autoridade aeronáutica, para garantir a aeronavegabilidade das aeronaves, ou seja, a sua segurança para a condição de voo, sem pôr em causa o carimbo baixo custo ou regular da companhia.

International mobility in the Pharmacy degree at the school of allied health sciences of Oporto

Background: The Erasmus program is a subprogram of the Lifelong Learning program, exclusive for Higher Education that promotes (among other initiatives), the mobility of students(studies, training or internships). The mobility of students of higher education seeks to improve the quality and development of future professionals, providing a multidisciplinary and multicultural experience. Setting: Academic Pharmacy/Pharmacy Technicians Methods: We conducted a descriptive and transversal study on the implementation of the mobility program and analyze the results, which involved applying a survey to students. Results: Since 2009/2010, the Pharmacy Degree at ESTSP has established 7 SMs protocols resulting in an average mobility of 5 students IN and 7 Students OUT. We have also endeavoured in SMp Protocols for extracurricular training with an average of 3 students OUT. The application process is normally open during the year before the mobility period. For most of the students involved, this was a first time opportunity to be in a foreign country and more than 70% choose the mobility program because it is seen as a possibility to improve their curriculum, for personal development or even to pursue employment opportunities abroad. The mobility for teachers is also encouraged. Conclusions: The exchange of experiences and training, acquired during cooperation activities should be an element of continuous dynamics and institutional affirmation. Initiatives such as the ERASMUS Program contribute to the educational and scientific enrichment, and promote international competitiveness among Higher Education Institutions.

Implementation of proton therapy in the portuguese context of radiotherapy

Cancer is a national and international health care concern. It’s important to find strategies for early diagnosis as well as for the optimization of the various therapeutic options currently existing in Portugal. Cancer is the second leading cause of death in Portugal, the choice of this study, is due to the importance of radiotherapy approach in cancer treatment and because is the therapy used in 40% of oncology patients. Radiation therapy has evolve data technological level, that allows new treatment techniques that are more efficient and that also promotes greater professional satisfaction. The hadrons are charged particles, used in cancer therapy. These particles can bring a paradigm shift regarding the therapeutic approach in radiotherapy. The technique used is proton therapy, that reveal to be more accurate, efficacious and less toxic to surrounding tissue. Proton therapy may be a promising development in the field of oncology and how the treatment is given in radiotherapy. Although there is awareness of the benefits of proton therapy in oncology it’s also important to take in consideration the costs of these therapy, because they are considerably higher than conventional treatments of radiotherapy. Given the lack of a proton therapy service in Portugal, this study aims to be a documentary analysis of clinical records that will achieve the following objectives: to identify the number of cancer patients diagnosed in 2010 in Portugal and to calculate the estimated number of patients that could have been treated with proton therapy according to the Health Council of the Netherlands registration document.

A importância de um programa de atividade física em doentes com esclerose múltipla na satisfação com a vida e bem-estar psicológico

A Esclerose Múltipla (EM) é uma doença crónica do sistema nervoso central, que afeta com mais frequentemente mulheres jovens. A EM é uma doença progressiva e imprevisível, resultando em alguns casos de incapacidades e limitações a nível físico, psicológico e social. Este estudo tem como objetivo verificar o efeito de um programa de intervenção para a promoção da atividade física (PIPAF) em indivíduos com EM no bem-estar psicológico (BEP) e na satisfação com a vida (SV). Métodos – É um estudo quasi-experimental. Utilizamos a escala de satisfação com a vida (7 itens) e a componente BEP do inventário de saúde mental (14 itens). O estudo inclui 24 doentes EM com idade média de 44 anos, 58,3% são mulheres, 37,5% são casados, 67% estão reformados, a média de escolaridade é de 12,5 anos, sendo a EM diagnosticada há pelo menos um ano. O programa consiste numa intervenção para a promoção da atividade física em grupos de oito pessoas, semanalmente, durante 90 minutos, em sete semanas. Para analisar os resultados utilizamos o programa SPSS, versão 20. Resultados – Utilizamos o teste Wilcoxon para as variáveis BEP e a SV, obtido a partir da avaliação antes do programa de intervenção e no final do programa. Verificamos que houve alterações significativas entre os dois tempos p <0,01, em ambas as variáveis, com resultados mais elevados no final do programa de intervenção. Discussão/Conclusão – Através da leitura dos resultados podemos verificar que a implementação do PIPAF, em doentes com EM, utilizando um modelo holístico e integrado numa perspetiva biopsicossocial, melhora a SV e a BEP destes doentes.

Relatório de estágio em reabilitação neurológica

Mestrado em Fisioterapia.

Solving a signalized traffic intersection problem with an hyperbolic penalty function

Mathematical Program with Complementarity Constraints (MPCC) finds many applications in fields such as engineering design, economic equilibrium and mathematical programming theory itself. A queueing system model resulting from a single signalized intersection regulated by pre-timed control in traffic network is considered. The model is formulated as an MPCC problem. A MATLAB implementation based on an hyperbolic penalty function is used to solve this practical problem, computing the total average waiting time of the vehicles in all queues and the green split allocation. The problem was codified in AMPL.

Inexact restoration approaches to solve mathematical program with complementarity constraints

Mathematical Program with Complementarity Constraints (MPCC) finds applica- tion in many fields. As the complementarity constraints fail the standard Linear In- dependence Constraint Qualification (LICQ) or the Mangasarian-Fromovitz constraint qualification (MFCQ), at any feasible point, the nonlinear programming theory may not be directly applied to MPCC. However, the MPCC can be reformulated as NLP problem and solved by nonlinear programming techniques. One of them, the Inexact Restoration (IR) approach, performs two independent phases in each iteration - the feasibility and the optimality phases. This work presents two versions of an IR algorithm to solve MPCC. In the feasibility phase two strategies were implemented, depending on the constraints features. One gives more importance to the complementarity constraints, while the other considers the priority of equality and inequality constraints neglecting the complementarity ones. The optimality phase uses the same approach for both algorithm versions. The algorithms were implemented in MATLAB and the test problems are from MACMPEC collection.

Efficient implementation of a dominance protocol for wireless medium access

Mestrado em Engenharia Electrotécnica e de Computadores