Aldo Rossi, autobiografia scientifica: scrittura come progetto. Indagine critica tra scrittura e progetto di architettura

«In altri termini mi sfuggiva e ancora oggi mi sfugge gran parte del significato dell’evoluzione del tempo; come se il tempo fosse una materia che osservo dall’esterno. Questa mancanza di evoluzione è fonte di alcune mie sventure ma anche mi appartiene con gioia.» Aldo Rossi, Autobiografia scientifica. The temporal dimension underpinning the draft of Autobiografia scientifica by Aldo Rossi may be referred to what Lucien Lévy-Bruhl, the well-known French anthropologist, defines as “primitive mentality” and “prelogical” conscience : the book of life has lost its page numbers, even punctuation. For Lévy-Bruhl, but certainly for Rossi, life or its summing up becomes a continuous account of ellipses, gaps, repetitions that may be read from left to right or viceversa, from head to foot or viceversa without distinction. Rossi’s autobiographical writing seems to accept and support the confusion with which memories have been collected, recording them after the order memory gives them in the mental distillation or simply according to the chronological order in which they have happened. For Rossi, the confusion reflects the melting of memory elements into a composite image which is the result of a fusion. He is aware that the same sap pervades all memories he is going to put in order: each of them has got a common denominator. Differences have diminished, almost faded; the quick glance is prevalent over the distinction of each episode. Rossi’s writing is beyond the categories dependent on time: past and present, before and now. For Rossi, the only repetition – the repetition the text will make possible for an indefinite number of times – gives peculiarity to the event. As Gilles Deleuze knows, “things” may only last as “singleness”: more frequent the repetition is, more singular is the memory phenomenon that recurs, because only what is singular magnifies itself and happens endlessly forever. Rossi understands that “to raise the first time to nth forever”, repetition becomes glorification . It may be an autobiography that, celebrating the originality, enhances the memory event in the repetition; in fact it greatly differs from the biographical reproduction, in which each repetition is but a weaker echo, a duller copy, provided with a smaller an smaller power in comparison with the original. Paradoxically, for Deleuze the repetition asserts the originality and singularity of what is repeated. Rossi seems to share the thought expressed by Kierkegaard in the essay Repetition: «The hope is a graceful maiden slipping through your fingers; the memory of an elderly woman, indeed pretty, but never satisfactory if necessary; the repetition is a loved friend you are never tired of, as it is only the new to make you bored. The old never bores you and its presence makes you happy [...] life is but a repetition [...] here is the beauty of life» . Rossi knows well that repetition hints at the lasting stability of cosmic time. Kierkegaard goes on: «The world exists, and it exists as a repetition» . Rossi devotes himself, on purpose and in all conscience, to collect, to inventory and «to review life», his own life, according to a recovery not from the past but of the past: a search work, the «recherche du temps perdu», as Proust entitled his masterpiece on memory. If you want the past time to be not wasted, you must give it presence. «Memoria e specifico come caratteristiche per riconoscere se stesso e ciò che è estraneo mi sembravano le più chiare condizioni e spiegazioni della realtà. Non esiste uno specifico senza memoria, e una memoria che non provenga da un momento specifico; e solo questa unione permette la conoscenza della propria individualità e del contrario (self e non-self)» . Rossi wants to understand himself, his own character; it is really his own character that requires to be understood, to increase its own introspective ability and intelligence. «Può sembrare strano che Planck e Dante associno la loro ricerca scientifica e autobiografica con la morte; una morte che è in qualche modo continuazione di energia. In realtà, in ogni artista o tecnico, il principio della continuazione dell’energia si mescola con la ricerca della felicità e della morte» . The eschatological incipit of Rossi’s autobiography refers to Freud’s thought in the exact circularity of Dante’s framework and in as much exact circularity of the statement of the principle of the conservation of energy: in fact it was Freud to connect repetition to death. For Freud, the desire of repetition is an instinct rooted in biology. The primary aim of such an instinct would be to restore a previous condition, so that the repeated history represents a part of the past (even if concealed) and, relieving the removal, reduces anguish and tension. So, Freud ask himself, what is the most remote state to which the instinct, through the repetition, wants to go back? It is a pre-vital condition, inorganic of the pure entropy, a not-to-be condition in which doesn’t exist any tension; in other words, Death. Rossi, with the theme of death, introduces the theme of circularity which further on refers to the sense of continuity in transformation or, in the opposite way, the transformation in continuity. «[...] la descrizione e il rilievo delle forme antiche permettevano una continuità altrimenti irripetibile, permettevano anche una trasformazione, una volta che la vita fosse fermata in forme precise» . Rossi’s attitude seems to hint at the reflection on time and – in a broad sense – at the thought on life and things expressed by T.S. Eliot in Four Quartets: «Time present and time past / Are both perhaps present in time future, / And time future is contained in time past. / I all time is eternally present / All time is unredeemable. / What might have been is an abstraction / Remaining perpetual possibility / Only in a word of speculation. / What might have been and what has been / Point to one end, which is always present. [...]» . Aldo Rossi’s autobiographical story coincides with the description of “things” and the description of himself through the things in the exact parallel with craft or art. He seems to get all things made by man to coincide with the personal or artistic story, with the consequent immediate necessity of formulating a new interpretation: the flow of things has never met a total stop; all that exists nowadays is but a repetition or a variant of something existing some time ago and so on, without any interruption until the early dawnings of human life. Nevertheless, Rossi must operate specific subdivisions inside the continuous connection in time – of his time – even if limited by a present beginning and end of his own existence. This artist, as an “historian” of himself and his own life – as an auto-biographer – enjoys the privilege to be able to decide if and how to operate the cutting in a certain point rather than in another one, without being compelled to justify his choice. In this sense, his story is a matter very ductile and flexible: a good story-teller can choose any moment to start a certain sequence of events. Yet, Rossi is aware that, beyond the mere narration, there is the problem to identify in history - his own personal story – those flakings where a clean cut enables the separation of events of different nature. In order to do it, he has to make not only an inventory of his own “things”, but also to appeal to authority of the Divina Commedia started by Dante when he was 30. «A trent’anni si deve compiere o iniziare qualcosa di definitivo e fare i conti con la propria formazione» . For Rossi, the poet performs his authority not only in the text, but also in his will of setting out on a mystical journey and handing it down through an exact descriptive will. Rossi turns not only to the authority of poetry, but also evokes the authority of science with Max Plank and his Scientific Autobiography, published, in Italian translation, by Einaudi, 1956. Concerning Planck, Rossi resumes an element seemingly secondary in hit account where the German physicist «[...] risale alle scoperte della fisica moderna ritrovando l’impressione che gli fece l’enunciazione del principio di conservazione dell’energia; [...]» . It is again the act of describing that links Rossi to Planck, it is the description of a circularity, the one of conservation of energy, which endorses Rossi’s autobiographical speech looking for both happiness and death. Rossi seems to agree perfectly to the thought of Planck at the opening of his own autobiography: «The decision to devote myself to science was a direct consequence of a discovery which was never ceased to arouse my enthusiasm since my early youth: the laws of human thought coincide with the ones governing the sequences of the impressions we receive from the world surrounding us, so that the mere logic can enable us to penetrate into the latter one’s mechanism. It is essential that the outer world is something independent of man, something absolute. The search of the laws dealing with this absolute seems to me the highest scientific aim in life» . For Rossi the survey of his own life represents a way to change the events into experiences, to concentrate the emotion and group them in meaningful plots: «It seems, as one becomes older. / That the past has another pattern, and ceases to be a mere sequence [...]» Eliot wrote in Four Quartet, which are a meditation on time, old age and memory . And he goes on: «We had the experience but missed the meaning, / And approach to the meaning restores the experience / In a different form, beyond any meaning [...]» . Rossi restores in his autobiography – but not only in it – the most ancient sense of memory, aware that for at least 15 centuries the Latin word memoria was used to show the activity of bringing back images to mind: the psychology of memory, which starts with Aristotele (De Anima), used to consider such a faculty totally essential to mind. Keith Basso writes: «The thought materializes in the form of “images”» . Rossi knows well – as Aristotele said – that if you do not have a collection of mental images to remember – imagination – there is no thought at all. According to this psychological tradition, what today we conventionally call “memory” is but a way of imagining created by time. Rossi, entering consciously this stream of thought, passing through the Renaissance ars memoriae to reach us gives a great importance to the word and assumes it as a real place, much more than a recollection, even more than a production and an emotional elaboration of images.

In situ real-time investigation of Organic Ultra-Thin-Film transistors: growth, electrical properties and biosensing applications

Organic electronics has grown enormously during the last decades driven by the encouraging results and the potentiality of these materials for allowing innovative applications, such as flexible-large-area displays, low-cost printable circuits, plastic solar cells and lab-on-a-chip devices. Moreover, their possible field of applications reaches from medicine, biotechnology, process control and environmental monitoring to defense and security requirements. However, a large number of questions regarding the mechanism of device operation remain unanswered. Along the most significant is the charge carrier transport in organic semiconductors, which is not yet well understood. Other example is the correlation between the morphology and the electrical response. Even if it is recognized that growth mode plays a crucial role into the performance of devices, it has not been exhaustively investigated. The main goal of this thesis was the finding of a correlation between growth modes, electrical properties and morphology in organic thin-film transistors (OTFTs). In order to study the thickness dependence of electrical performance in organic ultra-thin-film transistors, we have designed and developed a home-built experimental setup for performing real-time electrical monitoring and post-growth in situ electrical characterization techniques. We have grown pentacene TFTs under high vacuum conditions, varying systematically the deposition rate at a fixed room temperature. The drain source current IDS and the gate source current IGS were monitored in real-time; while a complete post-growth in situ electrical characterization was carried out. At the end, an ex situ morphological investigation was performed by using the atomic force microscope (AFM). In this work, we present the correlation for pentacene TFTs between growth conditions, Debye length and morphology (through the correlation length parameter). We have demonstrated that there is a layered charge carriers distribution, which is strongly dependent of the growth mode (i.e. rate deposition for a fixed temperature), leading to a variation of the conduction channel from 2 to 7 monolayers (MLs). We conciliate earlier reported results that were apparently contradictory. Our results made evident the necessity of reconsidering the concept of Debye length in a layered low-dimensional device. Additionally, we introduce by the first time a breakthrough technique. This technique makes evident the percolation of the first MLs on pentacene TFTs by monitoring the IGS in real-time, correlating morphological phenomena with the device electrical response. The present thesis is organized in the following five chapters. Chapter 1 makes an introduction to the organic electronics, illustrating the operation principle of TFTs. Chapter 2 presents the organic growth from theoretical and experimental points of view. The second part of this chapter presents the electrical characterization of OTFTs and the typical performance of pentacene devices is shown. In addition, we introduce a correcting technique for the reconstruction of measurements hampered by leakage current. In chapter 3, we describe in details the design and operation of our innovative home-built experimental setup for performing real-time and in situ electrical measurements. Some preliminary results and the breakthrough technique for correlating morphological and electrical changes are presented. Chapter 4 meets the most important results obtained in real-time and in situ conditions, which correlate growth conditions, electrical properties and morphology of pentacene TFTs. In chapter 5 we describe applicative experiments where the electrical performance of pentacene TFTs has been investigated in ambient conditions, in contact to water or aqueous solutions and, finally, in the detection of DNA concentration as label-free sensor, within the biosensing framework.

Dynamic identification of structures: experimental assessment of modal parameteres through methods in frequency domain, in time-frequency domain and model updating

Among the experimental methods commonly used to define the behaviour of a full scale system, dynamic tests are the most complete and efficient procedures. A dynamic test is an experimental process, which would define a set of characteristic parameters of the dynamic behaviour of the system, such as natural frequencies of the structure, mode shapes and the corresponding modal damping values associated. An assessment of these modal characteristics can be used both to verify the theoretical assumptions of the project, to monitor the performance of the structural system during its operational use. The thesis is structured in the following chapters: The first introductive chapter recalls some basic notions of dynamics of structure, focusing the discussion on the problem of systems with multiply degrees of freedom (MDOF), which can represent a generic real system under study, when it is excited with harmonic force or in free vibration. The second chapter is entirely centred on to the problem of dynamic identification process of a structure, if it is subjected to an experimental test in forced vibrations. It first describes the construction of FRF through classical FFT of the recorded signal. A different method, also in the frequency domain, is subsequently introduced; it allows accurately to compute the FRF using the geometric characteristics of the ellipse that represents the direct input-output comparison. The two methods are compared and then the attention is focused on some advantages of the proposed methodology. The third chapter focuses on the study of real structures when they are subjected to experimental test, where the force is not known, like in an ambient or impact test. In this analysis we decided to use the CWT, which allows a simultaneous investigation in the time and frequency domain of a generic signal x(t). The CWT is first introduced to process free oscillations, with excellent results both in terms of frequencies, dampings and vibration modes. The application in the case of ambient vibrations defines accurate modal parameters of the system, although on the damping some important observations should be made. The fourth chapter is still on the problem of post processing data acquired after a vibration test, but this time through the application of discrete wavelet transform (DWT). In the first part the results obtained by the DWT are compared with those obtained by the application of CWT. Particular attention is given to the use of DWT as a tool for filtering the recorded signal, in fact in case of ambient vibrations the signals are often affected by the presence of a significant level of noise. The fifth chapter focuses on another important aspect of the identification process: the model updating. In this chapter, starting from the modal parameters obtained from some environmental vibration tests, performed by the University of Porto in 2008 and the University of Sheffild on the Humber Bridge in England, a FE model of the bridge is defined, in order to define what type of model is able to capture more accurately the real dynamic behaviour of the bridge. The sixth chapter outlines the necessary conclusions of the presented research. They concern the application of a method in the frequency domain in order to evaluate the modal parameters of a structure and its advantages, the advantages in applying a procedure based on the use of wavelet transforms in the process of identification in tests with unknown input and finally the problem of 3D modeling of systems with many degrees of freedom and with different types of uncertainty.

The Simon effect and its time courses: an investigation

The objective of the current thesis is to investigate the temporal dynamics (i.e., time courses) of the Simon effect, both from a theoretical and experimental point of view, for a better understanding of whether a) one or more process are responsible for the Simon effect and b) how this/these mechanism/s differently influence performance. In the first theoretical (i.e., “Theoretical Overview”) part, I examined in detail the process and justification for analyzing the temporal dynamics of the Simon effect and the assumptions that underlie interpretation of the results which have been obtained in the existing literature so far. In the second part (“Experimental Investigations”), though, I experimentally investigated several issues which the existing literature left unsolved, in order to get further evidence in favor or in contrast with the mainstream models which are currently used to account for the different Simon effect time courses. Some points about the experiments are worth mentioning: First, all the experiments were conducted in the laboratory, facing participants with stimuli presented on a PC screen and then recording their responses. Both stimuli presentation and response collection was controlled by the E-Prime software. The dependent variables of interest were always behavioral measures of performance, such as velocity and accuracy. Second, the most part of my experiments had been conducted at the Communication Sciences Department (University of Bologna), under Prof. Nicoletti’s supervision. The remaining part, though, had been conducted at the Psychological Sciences Department of Purdue University (West Lafayette, Indiana, USA), where I collaborated for one year as a visiting student with Prof. Proctor and his team. Third, my experimental pool was entirely composed by healthy and young students, since the cognitive functioning of elderly people was not the target of my research.

The spatial representation of time

Numerosi studi mostrano che gli intervalli temporali sono rappresentati attraverso un codice spaziale che si estende da sinistra verso destra, dove gli intervalli brevi sono rappresentati a sinistra rispetto a quelli lunghi. Inoltre tale disposizione spaziale del tempo può essere influenzata dalla manipolazione dell’attenzione-spaziale. La presente tesi si inserisce nel dibattito attuale sulla relazione tra rappresentazione spaziale del tempo e attenzione-spaziale attraverso l’uso di una tecnica che modula l’attenzione-spaziale, ovvero, l’Adattamento Prismatico (AP). La prima parte è dedicata ai meccanismi sottostanti tale relazione. Abbiamo mostrato che spostando l’attenzione-spaziale con AP, verso un lato dello spazio, si ottiene una distorsione della rappresentazione di intervalli temporali, in accordo con il lato dello spostamento attenzionale. Questo avviene sia con stimoli visivi, sia con stimoli uditivi, nonostante la modalità uditiva non sia direttamente coinvolta nella procedura visuo-motoria di AP. Questo risultato ci ha suggerito che il codice spaziale utilizzato per rappresentare il tempo, è un meccanismo centrale che viene influenzato ad alti livelli della cognizione spaziale. La tesi prosegue con l’indagine delle aree corticali che mediano l’interazione spazio-tempo, attraverso metodi neuropsicologici, neurofisiologici e di neuroimmagine. In particolare abbiamo evidenziato che, le aree localizzate nell’emisfero destro, sono cruciali per l’elaborazione del tempo, mentre le aree localizzate nell’emisfero sinistro sono cruciali ai fini della procedura di AP e affinché AP abbia effetto sugli intervalli temporali. Infine, la tesi, è dedicata allo studio dei disturbi della rappresentazione spaziale del tempo. I risultati ci indicano che un deficit di attenzione-spaziale, dopo danno emisferico destro, provoca un deficit di rappresentazione spaziale del tempo, che si riflette negativamente sulla vita quotidiana dei pazienti. Particolarmente interessanti sono i risultati ottenuti mediante AP. Un trattamento con AP, efficace nel ridurre il deficit di attenzione-spaziale, riduce anche il deficit di rappresentazione spaziale del tempo, migliorando la qualità di vita dei pazienti.

Ground penetrating radar early-time technique for soil electromagnetic parameters estimation

In recent years, thanks to the technological advances, electromagnetic methods for non-invasive shallow subsurface characterization have been increasingly used in many areas of environmental and geoscience applications. Among all the geophysical electromagnetic methods, the Ground Penetrating Radar (GPR) has received unprecedented attention over the last few decades due to its capability to obtain, spatially and temporally, high-resolution electromagnetic parameter information thanks to its versatility, its handling, its non-invasive nature, its high resolving power, and its fast implementation. The main focus of this thesis is to perform a dielectric site characterization in an efficient and accurate way studying in-depth a physical phenomenon behind a recent developed GPR approach, the so-called early-time technique, which infers the electrical properties of the soil in the proximity of the antennas. In particular, the early-time approach is based on the amplitude analysis of the early-time portion of the GPR waveform using a fixed-offset ground-coupled antenna configuration where the separation between the transmitting and receiving antenna is on the order of the dominant pulse-wavelength. Amplitude information can be extracted from the early-time signal through complex trace analysis, computing the instantaneous-amplitude attributes over a selected time-duration of the early-time signal. Basically, if the acquired GPR signals are considered to represent the real part of a complex trace, and the imaginary part is the quadrature component obtained by applying a Hilbert transform to the GPR trace, the amplitude envelope is the absolute value of the resulting complex trace (also known as the instantaneous-amplitude). Analysing laboratory information, numerical simulations and natural field conditions, and summarising the overall results embodied in this thesis, it is possible to suggest the early-time GPR technique as an effective method to estimate physical properties of the soil in a fast and non-invasive way.

Early Warning For Large Earthquakes: Observations, Models and Real-Time Data Analysis

This thesis is a collection of works focused on the topic of Earthquake Early Warning, with a special attention to large magnitude events. The topic is addressed from different points of view and the structure of the thesis reflects the variety of the aspects which have been analyzed. The first part is dedicated to the giant, 2011 Tohoku-Oki earthquake. The main features of the rupture process are first discussed. The earthquake is then used as a case study to test the feasibility Early Warning methodologies for very large events. Limitations of the standard approaches for large events arise in this chapter. The difficulties are related to the real-time magnitude estimate from the first few seconds of recorded signal. An evolutionary strategy for the real-time magnitude estimate is proposed and applied to the single Tohoku-Oki earthquake. In the second part of the thesis a larger number of earthquakes is analyzed, including small, moderate and large events. Starting from the measurement of two Early Warning parameters, the behavior of small and large earthquakes in the initial portion of recorded signals is investigated. The aim is to understand whether small and large earthquakes can be distinguished from the initial stage of their rupture process. A physical model and a plausible interpretation to justify the observations are proposed. The third part of the thesis is focused on practical, real-time approaches for the rapid identification of the potentially damaged zone during a seismic event. Two different approaches for the rapid prediction of the damage area are proposed and tested. The first one is a threshold-based method which uses traditional seismic data. Then an innovative approach using continuous, GPS data is explored. Both strategies improve the prediction of large scale effects of strong earthquakes.

A new method for the estimation of the reverberation time from measured room impulse responses with application to Italian opera houses

The Schroeder's backward integration method is the most used method to extract the decay curve of an acoustic impulse response and to calculate the reverberation time from this curve. In the literature the limits and the possible improvements of this method are widely discussed. In this work a new method is proposed for the evaluation of the energy decay curve. The new method has been implemented in a Matlab toolbox. Its performance has been tested versus the most accredited literature method. The values of EDT and reverberation time extracted from the energy decay curves calculated with both methods have been compared in terms of the values themselves and in terms of their statistical representativeness. The main case study consists of nine Italian historical theatres in which acoustical measurements were performed. The comparison of the two extraction methods has also been applied to a critical case, i.e. the structural impulse responses of some building elements. The comparison underlines that both methods return a comparable value of the T30. Decreasing the range of evaluation, they reveal increasing differences; in particular, the main differences are in the first part of the decay, where the EDT is evaluated. This is a consequence of the fact that the new method returns a “locally" defined energy decay curve, whereas the Schroeder's method accumulates energy from the tail to the beginning of the impulse response. Another characteristic of the new method for the energy decay extraction curve is its independence on the background noise estimation. Finally, a statistical analysis is performed on the T30 and EDT values calculated from the impulse responses measurements in the Italian historical theatres. The aim of this evaluation is to know whether a subset of measurements could be considered representative for a complete characterization of these opera houses.

Das neue digitale ‚Shakespeare-Bildarchiv Oppel-Hammerschmidt‘ an der Universitätsbibliothek Mainz : Reden und Beiträge anlässlich seiner öffentlichen Vorstellung am 17. November 2008 an der Johannes Gutenberg-Universität Mainz

On the basis of illustrations of Shakespeare's Hamlet, the new digital 'Oppel-Hammerschmidt Shakespeare Illustration Archive' at the Mainz University Library - together with a lavishly-constructed and multiply-linked Web interface version - was presented to the public on 17 November 2008. This e-book, edited by Andreas Anderhub and Hildegard Hammerschmidt-Hummel, contains the speeches and presentations given on the occasion of the opening ceremony of the electronic archive. The collection of the new archive, published here for the first time, holds about 3,500 images and is part of the only Shakespeare illustration archive in the world. The Shakespeare Illustration Archive was founded in 1946 by the internationally acclaimed Shakespeare and Goethe scholar, Prof. Horst Oppel. This part of the archive was donated to the Mainz University Library on condition that its holdings be digitalised and made available to the public. The collection has been named 'The Oppel-Hammerschmidt Shakespeare Illustration Archive' in accordance with the terms of the Agreement of Donation of 9, 15, and 16 September 2005, and honouring the 16 March 1988 Delegation of Authority and Declaration of Intent by Frau Ingeborg Oppel, Prof. Oppel's widow and legal assignee. Vice-President Prof. Jürgen Oldenstein opened the proceedings by noting that 2008 had been a good year for international Shakespeare scholarship. For, in London, the site of the 'Theatre' in Shoreditch, where Shakespeare's company performed, had been unearthed, and in Mainz the Shakespeare Archive had gone online with thousands of illustrations. The Dean of the Faculty of Philosophy and Philology, Prof. Mechthild Dreyer, who mentioned that she herself had long been successfully employing interdisciplinary research methods, took particular pleasure in the transdisciplinary approach to research resolutely pursued by Prof. Hammerschmidt-Hummel. Prof. Clemens Zintzen (Cologne), former President of the Mainz Academy of Literature and Sciences, recalled highlights from the more than sixty-year-long history of the Shakespeare Illustration Archive. Prof. Kurt Otten (Heidelberg and Cambridge) drew an impressive portrait of Horst Oppel's personality as an academic and praised his influential books on Goethe and Shakespeare. He pointed out that Oppel's Shakespeare Illustration Archive, the basis for many a dissertation, had enjoyed great popularity around the world. Prof. Otten also delineated the academic career of Prof. Hammerschmidt-Hummel and her new findings regarding Shakespeare's time, life and work. Prof. Rüdiger Ahrens OBE (Würzburg) drew attention to Prof. Hammerschmidt-Hummel's research results, directly or indirectly arising out of her work on the Shakespeare Illustration Archive. This research had centred on proving the authenticity of four visual representations of Shakespeare (the Chandos and Flower portraits, the Davenant bust and the Darmstadt Shakespeare death mask); solving the mystery around Shakespeare's 'Dark Lady'; and establishing the dramatist's Catholic religion. Prof. Hammerschmidt-Hummel reported on her 'Shakespeare Illustration' project, describing the nature, dimensions and significance of the Archive's pictorial material, which relates to all of Shakespeare's plays and stretches over five centuries. She explained that the digital 'Oppel-Hammerschmidt Illustration Archive' was an addition to the three-volume edition she had compiled, authored and edited for publication in 2003. Unlike the print version, however, the digital collection had only been partly editorially prepared. It represented source material and a basis for further work. Hammerschmidt-Hummel expressed her thanks to the Head of the Central University Library, Dr Andreas Anderhub, for his untiring commitment. After the initial donation had been made, he had entered enthusiastically into setting up the necessary contacts, getting all the work underway, and clearing the legal hurdles. Hammerschmidt-Hummel was especially grateful to University of Mainz librarian Heike Geisel, who had worked for nearly five years to carry out the large-scale digitalization of a total of 8,800 items. Frau Geisel was also extremely resourceful in devising ways of making the collection yield even more, e.g. by classifying and cross-linking the data, assembling clusters of individual topics that lend themselves to research, and (in collaboration with the art historian Dr Klaus Weber) making the archive's index of artists compatible with the data-bank of artists held by the University of Mainz Institute of Art History. In addition, she compiled an extremely helpful 'users' guide' to the new digital collection. Frau Geisel had enjoyed invaluable support from Dr Annette Holzapfel-Pschorn, the leading academic in the Central IT Department at the University, who set up an intelligent, most impressive Web interface using the latest application technologies. Frau Geisel and Dr Holzapfel-Pschorn were highly praised for their convincing demonstration, using illustrations to Hamlet, of how to access this well-devised and exceptionally user-friendly Web version. For legal reasons, Prof. Hammerschmidt-Hummel pointed out, the collection could not be released for open access on the internet. The media - as Dr Anderhub stressed in his foreword - had shown great interest in the new digital collection of thousands of Shakespearean illustrations (cf. Benjamin Cor's TV feature in "Tagesthemen", 17 November 2008, presented by Tom Buhrow). The ‘Oppel-Hammerschmidt Shakespeare Illustration Archive’ should also meet with particular interest not only among academic specialists, but also among the performers of the arts and persons active in the cultural realm in general, as well as theatre and film directors, literary managers, teachers, and countless Shakespeare enthusiasts.

Multicentre study for a robust protocol in single-voxel spectroscopy: quantification of MRS signals by time-domain fitting algorithms

Magnetic Resonance Spectroscopy (MRS) is an advanced clinical and research application which guarantees a specific biochemical and metabolic characterization of tissues by the detection and quantification of key metabolites for diagnosis and disease staging. The "Associazione Italiana di Fisica Medica (AIFM)" has promoted the activity of the "Interconfronto di spettroscopia in RM" working group. The purpose of the study is to compare and analyze results obtained by perfoming MRS on scanners of different manufacturing in order to compile a robust protocol for spectroscopic examinations in clinical routines. This thesis takes part into this project by using the GE Signa HDxt 1.5 T at the Pavillion no. 11 of the S.Orsola-Malpighi hospital in Bologna. The spectral analyses have been performed with the jMRUI package, which includes a wide range of preprocessing and quantification algorithms for signal analysis in the time domain. After the quality assurance on the scanner with standard and innovative methods, both spectra with and without suppression of the water peak have been acquired on the GE test phantom. The comparison of the ratios of the metabolite amplitudes over Creatine computed by the workstation software, which works on the frequencies, and jMRUI shows good agreement, suggesting that quantifications in both domains may lead to consistent results. The characterization of an in-house phantom provided by the working group has achieved its goal of assessing the solution content and the metabolite concentrations with good accuracy. The goodness of the experimental procedure and data analysis has been demonstrated by the correct estimation of the T2 of water, the observed biexponential relaxation curve of Creatine and the correct TE value at which the modulation by J coupling causes the Lactate doublet to be inverted in the spectrum. The work of this thesis has demonstrated that it is possible to perform measurements and establish protocols for data analysis, based on the physical principles of NMR, which are able to provide robust values for the spectral parameters of clinical use.

Dynamic distance analysis : new geometric data structures and algorithms for the real-time calculation of tolerance violating regions in the digital mockup process

In vielen Industriezweigen, zum Beispiel in der Automobilindustrie, werden Digitale Versuchsmodelle (Digital MockUps) eingesetzt, um die Konstruktion und die Funktion eines Produkts am virtuellen Prototypen zu überprüfen. Ein Anwendungsfall ist dabei die Überprüfung von Sicherheitsabständen einzelner Bauteile, die sogenannte Abstandsanalyse. Ingenieure ermitteln dabei für bestimmte Bauteile, ob diese in ihrer Ruhelage sowie während einer Bewegung einen vorgegeben Sicherheitsabstand zu den umgebenden Bauteilen einhalten. Unterschreiten Bauteile den Sicherheitsabstand, so muss deren Form oder Lage verändert werden. Dazu ist es wichtig, die Bereiche der Bauteile, welche den Sicherhabstand verletzen, genau zu kennen. rnrnIn dieser Arbeit präsentieren wir eine Lösung zur Echtzeitberechnung aller den Sicherheitsabstand unterschreitenden Bereiche zwischen zwei geometrischen Objekten. Die Objekte sind dabei jeweils als Menge von Primitiven (z.B. Dreiecken) gegeben. Für jeden Zeitpunkt, in dem eine Transformation auf eines der Objekte angewendet wird, berechnen wir die Menge aller den Sicherheitsabstand unterschreitenden Primitive und bezeichnen diese als die Menge aller toleranzverletzenden Primitive. Wir präsentieren in dieser Arbeit eine ganzheitliche Lösung, welche sich in die folgenden drei großen Themengebiete unterteilen lässt.rnrnIm ersten Teil dieser Arbeit untersuchen wir Algorithmen, die für zwei Dreiecke überprüfen, ob diese toleranzverletzend sind. Hierfür präsentieren wir verschiedene Ansätze für Dreiecks-Dreiecks Toleranztests und zeigen, dass spezielle Toleranztests deutlich performanter sind als bisher verwendete Abstandsberechnungen. Im Fokus unserer Arbeit steht dabei die Entwicklung eines neuartigen Toleranztests, welcher im Dualraum arbeitet. In all unseren Benchmarks zur Berechnung aller toleranzverletzenden Primitive beweist sich unser Ansatz im dualen Raum immer als der Performanteste.rnrnDer zweite Teil dieser Arbeit befasst sich mit Datenstrukturen und Algorithmen zur Echtzeitberechnung aller toleranzverletzenden Primitive zwischen zwei geometrischen Objekten. Wir entwickeln eine kombinierte Datenstruktur, die sich aus einer flachen hierarchischen Datenstruktur und mehreren Uniform Grids zusammensetzt. Um effiziente Laufzeiten zu gewährleisten ist es vor allem wichtig, den geforderten Sicherheitsabstand sinnvoll im Design der Datenstrukturen und der Anfragealgorithmen zu beachten. Wir präsentieren hierzu Lösungen, die die Menge der zu testenden Paare von Primitiven schnell bestimmen. Darüber hinaus entwickeln wir Strategien, wie Primitive als toleranzverletzend erkannt werden können, ohne einen aufwändigen Primitiv-Primitiv Toleranztest zu berechnen. In unseren Benchmarks zeigen wir, dass wir mit unseren Lösungen in der Lage sind, in Echtzeit alle toleranzverletzenden Primitive zwischen zwei komplexen geometrischen Objekten, bestehend aus jeweils vielen hunderttausend Primitiven, zu berechnen. rnrnIm dritten Teil präsentieren wir eine neuartige, speicheroptimierte Datenstruktur zur Verwaltung der Zellinhalte der zuvor verwendeten Uniform Grids. Wir bezeichnen diese Datenstruktur als Shrubs. Bisherige Ansätze zur Speicheroptimierung von Uniform Grids beziehen sich vor allem auf Hashing Methoden. Diese reduzieren aber nicht den Speicherverbrauch der Zellinhalte. In unserem Anwendungsfall haben benachbarte Zellen oft ähnliche Inhalte. Unser Ansatz ist in der Lage, den Speicherbedarf der Zellinhalte eines Uniform Grids, basierend auf den redundanten Zellinhalten, verlustlos auf ein fünftel der bisherigen Größe zu komprimieren und zur Laufzeit zu dekomprimieren.rnrnAbschießend zeigen wir, wie unsere Lösung zur Berechnung aller toleranzverletzenden Primitive Anwendung in der Praxis finden kann. Neben der reinen Abstandsanalyse zeigen wir Anwendungen für verschiedene Problemstellungen der Pfadplanung.

Increasing Utilization of US Electric Grids via Smart Technologies: Integration of Load Management, Real Time Pricing, Renewables, EVs and Smart Grid Sensors

Electric power grids throughout the world suffer from serious inefficiencies associated with under-utilization due to demand patterns, engineering design and load following approaches in use today. These grids consume much of the world’s energy and represent a large carbon footprint. From material utilization perspectives significant hardware is manufactured and installed for this infrastructure often to be used at less than 20-40% of its operational capacity for most of its lifetime. These inefficiencies lead engineers to require additional grid support and conventional generation capacity additions when renewable technologies (such as solar and wind) and electric vehicles are to be added to the utility demand/supply mix. Using actual data from the PJM [PJM 2009] the work shows that consumer load management, real time price signals, sensors and intelligent demand/supply control offer a compelling path forward to increase the efficient utilization and carbon footprint reduction of the world’s grids. Underutilization factors from many distribution companies indicate that distribution feeders are often operated at only 70-80% of their peak capacity for a few hours per year, and on average are loaded to less than 30-40% of their capability. By creating strong societal connections between consumers and energy providers technology can radically change this situation. Intelligent deployment of smart sensors, smart electric vehicles, consumer-based load management technology very high saturations of intermittent renewable energy supplies can be effectively controlled and dispatched to increase the levels of utilization of existing utility distribution, substation, transmission, and generation equipment. The strengthening of these technology, society and consumer relationships requires rapid dissemination of knowledge (real time prices, costs & benefit sharing, demand response requirements) in order to incentivize behaviors that can increase the effective use of technological equipment that represents one of the largest capital assets modern society has created.

Placing Identity: Town, Land, and Authenticity in Nunavut, Canada

Recent demographic changes have made settlement patterns in the Canadian Arctic increasingly urban. Iqaluit, capital of Canada’s newest territory, Nunavut, is home to the largest concentration of Inuit and non-Inuit populations in the Canadian North. Despite these trends, Inuit cultural identity continues to rest heavily on the perception that to learn how to be authentically Inuit (or to be a better person), a person needs to spend time out on the land (and sea) hunting, fishing, trapping, and camping. Many Inuit also maintain a rather negative view of urban spaces in the Arctic, identifying them as places where Inuit values and practices have been eclipsed by Qallunaat (‘‘white people’’) ones. Some Inuit have even gone so far as to claim that a person is no longer able to be Inuit while living in towns like Iqaluit. This article examines those aspects of Canadian Inuit identity, culture, and tradition that disfavor the acceptance of an urban cultural identity. Based on ethnographic research conducted on Baffin Island in the mid 1990s and early 2000s, the many ways Iqaluit and outpost camp Inuit express the differences and similarities between living on the land and living in town are described. Then follows an examination of how the contrast of land and town is used in the rhetoric of Inuit politicians and leaders. Finally, a series of counterexamples are presented that favor the creation of an authentic urban Inuit identity in the Arctic, including recent attempts on the part of the Nunavut Territorial Government to make education and wage employment in the region more reliant on Inuit Qaujimajatuqangit, or Inuit traditional knowledge.1

Development of a model-based transient calibration process for diesel engine electronic control module tables – Part 2: modelling and optimization

This is the second part of a study investigating a model-based transient calibration process for diesel engines. The first part addressed the data requirements and data processing required for empirical transient emission and torque models. The current work focuses on modelling and optimization. The unexpected result of this investigation is that when trained on transient data, simple regression models perform better than more powerful methods such as neural networks or localized regression. This result has been attributed to extrapolation over data that have estimated rather than measured transient air-handling parameters. The challenges of detecting and preventing extrapolation using statistical methods that work well with steady-state data have been explained. The concept of constraining the distribution of statistical leverage relative to the distribution of the starting solution to prevent extrapolation during the optimization process has been proposed and demonstrated. Separate from the issue of extrapolation is preventing the search from being quasi-static. Second-order linear dynamic constraint models have been proposed to prevent the search from returning solutions that are feasible if each point were run at steady state, but which are unrealistic in a transient sense. Dynamic constraint models translate commanded parameters to actually achieved parameters that then feed into the transient emission and torque models. Combined model inaccuracies have been used to adjust the optimized solutions. To frame the optimization problem within reasonable dimensionality, the coefficients of commanded surfaces that approximate engine tables are adjusted during search iterations, each of which involves simulating the entire transient cycle. The resulting strategy, different from the corresponding manual calibration strategy and resulting in lower emissions and efficiency, is intended to improve rather than replace the manual calibration process.