Developing a fluorimetric sequential injection methodology to study adsorption/desorption of glyphosate on soil and sediment samples

This paper describes the development of a sequential injection method to automate the fluorimetric determination of glyphosate based on a first step of oxidation to glycine by hypochlorite at 48 degrees C, followed by reaction with the fluorogenic reagent o-phthaldialdehyde in presence of 2-mercaptoethanol in borate buffer (pH > 9) to produce a fluorescent 1-(2`-hydroxyethylthio)-2-N-alkylisoindole. The proposed method has a linear response for glyphosate concentrations between 0.25 and 25.0 mu mol L(-1), with limits of detection and quantification of 0.08 and 0.25 mu mol L(-1), respectively. The sampling rate of the method is 18 samples per hour, consuming only a fraction of reagents consumed by the chromatographic method based on the same chemistry. The method was applied to study adsorption/desorption properties in a soil and in a sediment sample. Adsorption and desorption isotherms were properly fitted by Freundlich and Langmuir equations, leading to adsorption capacities of 1384 +/- 26 and 295 +/- 30 mg kg(-1) for the soil and sediment samples, respectively. These values are consistent with the literature, with the larger adsorption capacity of the soil being explained by its larger content of clay minerals, while the sediment was predominantly sandy. (C) 2011 Elsevier B.V. All rights reserved.

Applying sequential injection analysis (SIA) and response surface methodology for optimization of Fenton-based processes

This work presents the use of sequential injection analysis (SIA) and the response surface methodology as a tool for optimization of Fenton-based processes. Alizarin red S dye (C.I. 58005) was used as a model compound for the anthraquinones family. whose pigments have a large use in coatings industry. The following factors were considered: [H(2)O(2)]:[Alizarin] and [H(2)O(2)]:[FeSO(4)] ratios and pH. The SIA system was designed to add reagents to the reactor and to perform on-line sampling of the reaction medium, sending the samples to a flow-through spectrophotometer for monitoring the color reduction of the dye. The proposed system fed the statistical program with degradation data for fast construction of response surface plots. After optimization, 99.7% of the dye was degraded and the TOC content was reduced to 35% of the original value. Low reagents consumption and high sampling throughput were the remarkable features of the SIA system. (C) 2008 Published by Elsevier B.V.

Development of a spectrophotometric Sequential Injection Analysis (SIA) procedure for determination of ammonium: A Response Surface Methodology (RSM) approach

This paper describes the optimization and use of a Sequential Injection Analysis (SIA) procedure for ammonium determination in waters. Response Surface Methodology (RSM) was used as a tool for optimization of a procedure based on the modified Berthelot reaction. The SIA system was designed to (i) prepare the reaction media by injecting an air-segmented zone containing the reagents in a mixing chamber, (ii) to aspirate the mixture back to the holding coil after homogenization, (iii) drive it to a thermostated reaction coil, where the flow is stopped for a previously established time, and (iv) to pump the mixture toward the detector flow cell for the spectrophotometric measurements. Using a 100 mu mol L(-1) ammonium solution, the following factors were considered for optimization: reaction temperature (25 - 45 degrees C), reaction time (30 - 90 s), hypochlorite concentration (20 - 40 mmol L(-1)) nitroprusside concentration (10 - 40 mmol L(-1)) and salicylate concentration (0.1 - 0.3 mol L(-1)). The proposed system fed the statistical program with absorbance data for fast construction of response surface plots. After optimization of the method, figures of merit were evaluated, as well as the ammonium concentration in some water samples. No evidence of statistical difference was observed in the results obtained by the proposed method in comparison to those obtained by a reference method based on the phenol reaction. (C) 2010 Elsevier B.V. All rights reserved.

Development of an Analytical Methodology for Quantification of Strong Acid in Diesel Oil

Many factors can affect the quality of diesel oil, in particular the degradation processes that are directly related to some organosulfur compounds. During the degradation process, these compounds are oxidized into their corresponding sulfonic acids, generating a strong acid content during the process. p-Toluene sulfonic acid analysis was performed using the linear sweep voltammetry technique with a platinum ultramicroelectrode in aqueous solution containing 3 mol L(-1) potassium chloride. An extraction step was introduced prior to the voltammetric detection in order to avoid the adsorption of organic molecules, which inhibit the electrochemical response. The extraction step promoted the transference of sulfonic acid from the diesel oil to an aqueous phase. The method was accurate and reproducible, with detection and quantification limits of 5 ppm and 15 ppm, respectively. Recovery of sulfonic acid was around 90%.

The SUMA Project: Integrating Observational Data Assessment into Space and Service Design

This presentation was offered as part of the CUNY Library Assessment Conference, Reinventing Libraries: Reinventing Assessment, held at the City University of New York in June 2014.

Design/Evaluation of A Methodology For Performance Optimization Of Indexable Carbide Inserts

In this project, two broad facets in the design of a methodology for performance optimization of indexable carbide inserts were examined. They were physical destructive testing and software simulation.For the physical testing, statistical research techniques were used for the design of the methodology. A five step method which began with Problem definition, through System identification, Statistical model formation, Data collection and Statistical analyses and results was indepthly elaborated upon. Set-up and execution of an experiment with a compression machine together with roadblocks and possible solution to curb road blocks to quality data collection were examined. 2k factorial design was illustrated and recommended for process improvement. Instances of first-order and second-order response surface analyses were encountered. In the case of curvature, test for curvature significance with center point analysis was recommended. Process optimization with method of steepest ascent and central composite design or process robustness studies of response surface analyses were also recommended.For the simulation test, AdvantEdge program was identified as the most used software for tool development. Challenges to the efficient application of this software were identified and possible solutions proposed. In conclusion, software simulation and physical testing were recommended to meet the objective of the project.

Methodology for identifying parameters for the TRNSYS model Type 210 -wood pellet stoves and boilers

This report describes a method how to perform measurements on boilers and stoves and how to identify parameters from the measurements for the boiler/stove-model TRNSYS Type 210. The model can be used for detailed annual system simulations using TRNSYS. Experience from measurements on three different pellet stoves and four boilers were used to develop this methodology. Recommendations for the set up of measurements are given and the re-quired combustion theory for the data evaluation and data preparation are given. The data evalua-tion showed that the uncertainties are quite large for the measured flue gas flow rate and for boilers and stoves with high fraction of energy going to the water jacket also the calculated heat rate to the room may have large uncertainties. A methodology for the parameter identification process and identified parameters for two different stoves and three boilers are given. Finally the identified models are compared with measured data showing that the model generally agreed well with meas-ured data during both stationary and dynamic conditions.

Unfulfilled rehabilitation needs and dissatisfaction with care 12 months after a stroke : an explorative observational study

BACKGROUND: People who have suffered a stroke commonly report unfulfilled need for rehabilitation. Using a model of patient satisfaction, we examined characteristics in individuals that at 3 months after stroke predicted, or at 12 months were associated with unmet need for rehabilitation or dissatisfaction with health care services at 12 months after stroke. METHODS: The participants (n = 175) received care at the stroke units at the Karolinska University Hospital, Sweden. The dependent variables "unfulfilled needs for rehabilitation" and "dissatisfaction with care" were collected using a questionnaire. Stroke severity, domains of the Stroke Impact Scale (SIS), the Sense of Coherence scale (SOC) and socio demographic factors were used as independent variables in four logistic regression analyses. RESULTS: Unfulfilled needs for rehabilitation at 12 months were predicted by strength (SIS) (odds ratio (OR) 7.05) at three months, and associated with hand function (SIS) (OR 4.38) and poor self-rated recovery (SIS) (OR 2.46) at 12 months. Dissatisfaction with care was predicted by SOC (OR 4.18) and participation (SIS) (OR 3.78), and associated with SOC (OR 3.63) and strength (SIS) (OR 3.08). CONCLUSIONS: Thirty-three percent of the participants reported unmet needs for rehabilitation and fourteen percent were dissatisfied with the care received. In order to attend to rehabilitation needs when they arise, rehabilitation services may need to be more flexible in terms of when rehabilitation is provided. Long term services with scheduled re-assessments and with more emphasis on understanding the experiences of both the patients and their social networks might better be able to provide services that attend to patients' needs and aid peoples' reorientation; this would apply particularly to those with poor coping capacity.

Usual clinical practice for early supported discharge after stroke with continued rehabilitation at home : an observational comparative study

Introduction: Based on randomised controlled trials, evidence exists that early supported discharge (ESD) from the hospital with continued rehabilitation at home has beneficial effects after stroke; however, the effects of ESD service in regular clinical practice have not been investigated. The purpose of the current study was to compare ESD service with conventional rehabilitation in terms of patient outcomes, caregiver burden at 3 and 12 months and the use and costs of healthcare during the first year after stroke. Material and methods: This study was a subgroup analysis of a longitudinal observational study of patients who received care in the stroke unit at Karolinska University Hospital in Sweden. Patients who met the inclusion criteria for ESD in previous experimental studies were included. The patients were referred to available rehabilitation services at discharge, and comparisons between those who received ESD service (the ESD group, n = 40) and those who received conventional rehabilitation (the NoESD group, n = 110) were performed with regard to independence in activities of daily living (ADL), the frequency of social activities, life satisfaction, and caregiver burden and the use and costs of healthcare during the first year after stroke. Results: At 3 and 12 months, no differences were observed with regard to patient outcomes; however, ESD was associated with a lower caregiver burden (p = 0.01) at 12 months. The initial length of stay (LOS) at the hospital was 8 days for the ESD group and 15 days for the NoESD group (p = 0.02). The median number of outpatient rehabilitation contacts was 20.5 for the ESD group (81% constituting ESD service) and 3 for the NoESD group (p<0.001). There was no difference between the groups with regard to overall healthcare costs. Conclusions: ESD service in usual clinical practice renders similar health benefits as conventional rehabilitation but a different pattern of resource use and with released capacity in acute stroke care.

Towards a Methodology for Coordination Mechanism Selection in Open Systems

Agent-oriented software engineering (AOSE) is a promising approach to developing applications for dynamic open systems. If well developed, these applications can be opportunistic, taking advantage of services implemented by other developers at appropriate times. However, methodologies are needed to aid the development of systems that are both flexible enough to be opportunistic and tightly defined by the application requirements. In this paper, we investigate how developers can choose the coordination mechanisms of agents so that the agents will best fulfil application requirements in an open system.

PrIMe: A Methodology for Developing Provenance-Aware Applications

Provenance refers to the past processes that brought about a given (version of an) object, item or entity. By knowing the provenance of data, users can often better understand, trust, reproduce, and validate it. A provenance-aware application has the functionality to answer questions regarding the provenance of the data it produces, by using documentation of past processes. PrIMe is a software engineering technique for adapting application designs to enable them to interact with a provenance middleware layer, thereby making them provenance-aware. In this article, we specify the steps involved in applying PrIMe, analyse its effectiveness, and illustrate its use with two case studies, in bioinformatics and medicine.

Diagnóstico sistêmico de uma farmácia de manipulação de Porto Alegre com a utilização da "Soft Systems Methodology"

As empresas e instituições estão num ambiente que oferece oportunidades e ameaças, o que exige um conjunto de informações voltado tanto a processos e decisões táticas, operacionais e estratégicos. No entanto, conseguir informações com rapidez e qualidade não se trata apenas de adquirir pacotes de sistemas de informações ou mesmo desenvolvê-los nas organizações. Infelizmente, isto é o que mais tem ocorrido. Desta forma, a fim de ultrapassar esse amadorismo, faz-se necessário um diagnóstico sistêmico da organização, com objetivo de identificar os requisitos informacionais necessários à construção de um sistema de apoio às decisões. Destarte, este estudo realiza um diagnóstico sistêmico numa farmácia com a utilização da “Soft Systems Methodology”, a qual a partir de ampla interação entre pesquisador e as pessoas envolvidas , identifica e estrutura a situação problemática de forma encadeada, analisando-a sob duas preocupações: uma relacionada ao mundo real e outra ao pensamento sistêmico. Com este processo, desenvolve uma aprendizagem que permite não só a identificação dos requisitos informacionais necessários à construção de um sistema de informações como também reunir e organizar visões muitas vezes divergentes a respeito de uma realidade complexa, a fim de propor um rol de atividades e ações que possam contribuir para o processo de melhoria da situação problemática.