State of the art on animal embryonic chimeras

Embryonic chimerism is generally used in basic research and in vivo diagnosis of undifferentiated embryonic stem cells (ESC), mostly using mice embryos, although there have been reports in the literature on using rat, rabbit, sheep, chicken, primate, bovine, goat and pig embryos. Several techniques can currently be used to produce chimeric embryos, including microinjection, co-culture with ESC, fusion and aggregation. Although microinjection is the most commonly used method in mice, the mere aggregation of embryos with ESC may result in viable chimeras and be as efficient as microinjection. In mice, this chimerism technique has been shown to have the advantage of aggregating embryos in different stages of development with different ploidy, in addition to using ESC in the tetraploid complementation assay. Compared to other techniques for producing chimeras, the aggregation technique is a cheaper, faster and easier methodology to be performed. Moreover, aggregation can be simplified by chemically removing the zona pellucida with pronase or acidic Tyrode’s solution and be enhanced by using the Well of the Well culture system in combination with adhesion molecules, such as phytohemagglutinin. The most commonly used stages for chimerism by aggregation are those that precede the full compaction of the morula. In these stages, embryos have low-tension adherent junctions at the tangential point between two blastomeres. During the embryonic development of mice, the inner cell mass differentiates into epiblast and hypoblast. These layers will originate the fetal tissues and a portion of the extraembryonic tissues (yolk sac, allantois and amnion), whereas the trophectoderm (TE) gives rise to the chorion. A functional TE is essential for the complex molecular communications that occur between the embryo and the uterus. Embryos produced by somatic cell nuclear transfer, such as commercial cattle clones or endangered species, are subject to large fetal and neonatal losses. Hence embryo complementation with heterologous TE could be of assistance to decrease these losses and might as well assist development of high-value embryos in other approaches.

Neovascularization after ischemic injury: evaluation with 99mTc-HYNIC-RGD

Purpose: Angiogenesis involves many mediators including integrins, and the tripeptide RGD is a target amino acid recognition sequence for many of them. Hindlimb ischemia is a simple and convenient animal model however standardization of the injection procedures in the devascularized and control limb is lacking, thus rendering difficult the interpretation of results. The aim of this investigations was to evaluate neovascularization in a hindlimb murine model by means of 99mTc-HYNIC-ß-Ala-RGD. Methods: 99mTc-HYNIC-RGD analog was prepared using coligands. Ischemia was induced in Wistar rats by double- ligation of the common femoral artery. Radiolabeled RGD was injected after 2h, as well as 1, 3, 5, 7, 10 and 14 days. Uptake was evaluated by planar imaging and biodistribution studies. Results: The highest ratio between ischemia and control was achieved at the 7th day (2.62 ± 0.95), with substantial decrease by the 14th day. For pertechnetate the 7th day ratio was 0.87 ± 0.23. Scintigraphic image confirmed different uptakes. Conclusion: 99mTc-HYNIC-RGD analog concentrated in ischemic tissue by the time of widespread angiogenesis and pertechnetate confirmed reduction in blood flow. In this sense, the protocol can be recommended for ischemic models.

Influence of genotype-environment interaction on the classification of Nellore bulls in Southern Brazil

The aim of this study was to assess the occurrence of genotype-environment interaction, as well as its effects on the magnitude of genetic parameters and the classification of Nellore breeding bulls for the trait adjusted weight at 205 days (W205) on Southern Brazil. The components of (co)variance were estimated by Bayesian inference, using a linear-linear animal model in a bi-trait analysis. The proposed model for the analyses considers as random the direct additive genetic and maternal effects and residual effects, and as fixed effects the contemporary groups, sex, season of birth and weighing, and calving age as covariable (linear and quadratic effects). The a posteriori mean estimates of the direct heritabilities for W205 in the three States varied from 0.24 in Paraná (PR) to 0.34 in Santa Catarina (SC). The estimates of maternal heritability varied from 0.23 in SC and Rio Grande do Sul (RS) to 0.28 in PR. The a posteriori mean distributions of the genetic correlation varied from 0.52 between SC and RS, to 0.84 between PR and RS, suggesting that the best breeding bulls in SC are not the same as in RS.

Efeitos anti-inflamatório e antitumoral dos constituintes de Qualea grandiflora no tumor de Ehrlich

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Parâmetros genéticos para o perfil de ácidos graxos do longissimus thoracis de bovinos da raça Nelore terminados em confinamento

Pós-graduação em Genética e Melhoramento Animal - FCAV

Influência da adubação orgânica na qualidade da água destinada à irrigação de hortaliças

Pós-graduação em Microbiologia Agropecuária - FCAV

Composição lipídica da carne de frango em função da densidade nutricional da ração

Pós-graduação em Ciência Animal - FMVA

Protocolos de natação em modelos experimentais com ratos

Exercise physiology has attempted to reproduce the experimental exercise in the laboratory using mainly rats. The swimming exercise has emerged as one of the leading research in these type ergometers. Thus, this research consisted of a literature review addressing the key issues which involve the exercise of swimming in the model rats. Training of aerobic and anaerobic swimming, evaluation models and models of periodization were the topics suggested in this research. In several studies, models of aerobic and anaerobic training have been proposed with the aim of studying their effect on normal and abnormal physiological parameters. However, earlier studies lacked methods of analysis aiming to determine the exercise intensity in the animal model. For this reason, in the last decade, assessment models have been adapted for humans to animals, especially rats. The maximal lactate steady state (MLSS) and lactate minimum (LM) are among the various techniques used to measure the amount of effort produced by swimming exercise in rats. Thereafter, based on biochemical parameters such as lactate, swimming exercise in rats has become the highest-rated, ie, using as reference the anaerobic threshold (AT). In another aspect, an entirely new line of research has tried to understand and promising swimming training in a periodized and its effects on some biochemical parameters. But this is an area little researched so far. Thus, the experimental model of swimming has proved an important resource of exercise physiology. From this model, it becomes possible to study the exercise, especially swimming, in more accurate, based on invasive and incisive analysis of the rat

Mapeamento de cianobactérias por meio da fluorescência da ficocianina e de análise geoestatística

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise bayesiana para características de carcaça avaliadas por ultrassonografia de bovinos da raça Nelore Mocho, criados em bioma Cerrado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prediction of crude protein digestibility of animal by-product meals for dogs by the protein solubility in pepsin method

Animal by-product meals have large variability in crude protein (CP) content and digestibility. In vivo digestibility procedures are precise but laborious, and in vitro methods could be an alternative to evaluate and classify these ingredients. The present study reports prediction equations to estimate the CP digestibility of meat and bone meal (MBM) and poultry by-product meal (PM) using the protein solubility in pepsin method (PSP). Total tract CP digestibility of eight MBM and eight PM samples was determined in dogs by the substitution method. A basal diet was formulated for dog maintenance, and sixteen diets were produced by mixing 70 % of the basal diet and 30 % of each tested meal. Six dogs per diet were used to determine ingredient digestibility. In addition, PSP of the MBM and PM samples was determined using three pepsin concentrations: 0·02, 0·002 and 0·0002 %. The CP content of MBM and PM ranged from 39 to 46 % and 57 to 69 %, respectively, and their mean CP digestibility by dogs was 76 (2·4) and 85 (2·6) %, respectively. The pepsin concentration with higher Pearson correlation coefficients with the in vivo results were 0·0002 % for MBM (r 0·380; P = 0·008) and 0·02 % for PM (r 0·482; P = 0·005). The relationship between the in vivo and in vitro results was better explained by the following equations: CP digestibility of MBM = 61·7 + 0·2644 × PSP at 0·0002 % (P = 0·008; R (2) 0·126); and CP digestibility of PM = 54·1 + 0·3833 × PSP at 0·02 % (P = 0·005; R (2) 0·216). Although significant, the coefficients of determination were low, indicating that the models were weak and need to be used with caution.

Fabricação e caracterização de diodo Schottky orgânico com arquitetura planar

Usually organic polymeric diodes are made with a semiconductor layer placed between two electrodes in a sandwich-like architecture, where the electrodes are deposited on the surfaces of a polymeric semiconductor film. This methodology leads to two main problems: i) the polymeric film top surface is rough and irregular, resulting in non-uniform electric field into the device; ii) during the deposition of metallic electrode in the top surface polymeric film, by thermal evaporation, occurs the diffusion of metal atoms into the polymeric film, changing the material electronic structure. Thus, the metal-semiconductor junction is not well defined, which is essential for the production of good quality Schottky diode, which exhibits ideality factor close to the unity and low turn-on voltage. In order to avoid these two problems, in the present research was proposed to manufacture an organic diode with the semiconductor polymeric layer deposited over bimetallic (gold and aluminum) interdigitated electrodes. The doping of the active layer was performed by immersing the device in hydrochloric acid solution with pH 2 during different times in order to promote different doping levels of the semiconductor polymer. Was verified that the proposed diode, which exhibits well-defined metal-semiconductor junction, operates as a Schottky diode, with good ideality factor, 10 ± 3, and low turn-on voltage, 1,2 ± 0,2 V, in comparison with conventional organic polymeric diodes. Contrasting with the ideality factor and turn-on voltage, the diode rectification ratio was obtained as 7, a value lower than the expected for a good organic diode. Was also showed that the diode characteristics were dependent on the semiconductor polymer doping level, and that the diode characteristics were optimized with doping promoted by immersion in the acid solution for times longer than 50 s. Furthermore, as was showed that the diodes properties are dependent on the semiconductor...

Efeito da utilização de diferentes critérios de controle de qualidade dos genótipos em estudos de associação e seleção genômica ampla

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da capacidade imunomoduladora in vivo de células-tronco mesenquimais obtidas da matriz do cordão umbilical equino

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Corrositex®, BCOP and HET-CAM as alternative methods to animal experimentation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)