Biocorrosion in industrial applications

Industrial situations afflicted by corrosion induced by microorganisms are illustrated with examples. The types and characteristics of microorganisms involved in biocorrosion processes are discussed. Possible mechanisms in biocorrosion as occurring under sub-soil, sea water and fresh water conditions are analyzed. Methods to combat biocorrosion are also outlined.

Study on degradation of H-acid by Alcaligenes latus isolated from textile industrial effluent

This study presents 100% degradation of H-acid under optimized conditions using Alcaligenes latus, isolated from textile industrial effluent. Gene/s responsible for H-acid degradation was/were found to be present on plasmid DNA. Addition of bipyridyl to incubated medium resulted in accumulation of terminal aromatic compound, suggesting that catechol may be terminal aromatic compound in degradation pathway of H-acid by A. latus. SDS-PAGE of cell free extracts showed two prominent bands close to molecular weight of catechol 1,2-dioxygenase.

Ship-Mounted Real-Time Surface Observational System on board Indian Vessels for Validation and Refinement of Model Forcing Fields

A network of ship-mounted real-time Automatic Weather Stations integrated with Indian geosynchronous satellites Indian National Satellites (INSATs)] 3A and 3C, named Indian National Centre for Ocean Information Services Real-Time Automatic Weather Stations (I-RAWS), is established. The purpose of I-RAWS is to measure the surface meteorological-ocean parameters and transmit the data in real time in order to validate and refine the forcing parameters (obtained from different meteorological agencies) of the Indian Ocean Forecasting System (INDOFOS). Preliminary validation and intercomparison of analyzed products obtained from the National Centre for Medium Range Weather Forecasting and the European Centre for Medium-Range Weather Forecasts using the data collected from I-RAWS were carried out. This I-RAWS was mounted on board oceanographic research vessel Sagar Nidhi during a cruise across three oceanic regimes, namely, the tropical Indian Ocean, the extratropical Indian Ocean, and the Southern Ocean. The results obtained from such a validation and intercomparison, and its implications with special reference to the usage of atmospheric model data for forcing ocean model, are discussed in detail. It is noticed that the performance of analysis products from both atmospheric models is similar and good; however, European Centre for Medium-Range Weather Forecasts air temperature over the extratropical Indian Ocean and wind speed in the Southern Ocean are marginally better.

Combining ``chimie douce'' and green principles for the developing world: Improving industrial viability of photocatalytic water remediation

We highlight the need for a comprehensive, multi-disciplinary approach for the development of cost-effective water remediation methods. Combining ``chimie douce'' and green chemical principles seems essential for making these technologies economically viable and socially relevant (especially in the developing world). A comprehensive approach to water remediation will take into account issues such as nanotoxicity, chemical yield, cost, and ease of deployment in reactors. By considering technological challenges that lie ahead, we will attempt to identify directions that are likely to make photocatalytic water remediation a more global technology than it currently is. (C) 2013 Elsevier Ltd. All rights reserved

Biological sulfate reduction of a sulfate-rich industrial waste liquor using sulfate reducing bacteria

An industrial waste liquor having high sulfate concentrations was subjected to biological treatment using the sulfate-reducing bacteria (SRB) Desulfovibrio desulfuricans. Toxicity levels of different sulfate, cobalt and nickel concentrations toward growth of the SRB with respect to biological sulfate reduction kinetics was initially established. Optimum sulfate concentration to promote SRB growth amounted to 0.8 - 1 g/L. The strain of D. desulfuricans used in this study initially tolerated up to 4 -5 g/L of sulfate or 50 mg/L of cobalt and nickel, while its tolerance could be further enhanced through adaptation by serial subculturing in the presence of increasing concentrations of sulfate, cobalt and nickel. From the waste liquor, more than 70% of sulfate and 95% of cobalt and nickel could be precipitated as sulfides, using a preadapted strain of D. desulfuricans. Probable mechanisms involving biological sulfide precipitation and metal adsorption onto precipitates and bacterial cells are discussed.

Application of Qualitative Imaging Methods to Electrical Performance-Aware Package Board Design

Package-board co-design plays a crucial role in determining the performance of high-speed systems. Although there exist several commercial solutions for electromagnetic analysis and verification, lack of Computer Aided Design (CAD) tools for SI aware design and synthesis lead to longer design cycles and non-optimal package-board interconnect geometries. In this work, the functional similarities between package-board design and radio-frequency (RF) imaging are explored. Consequently, qualitative methods common to the imaging community, like Tikhonov Regularization (TR) and Landweber method are applied to solve multi-objective, multi-variable package design problems. In addition, a new hierarchical iterative piecewise linear algorithm is developed as a wrapper over LBP for an efficient solution in the design space.

Efficient Adaptive Mesh Refinement for MoM-based Package-Board 3D Full-wave Extraction

The accurate solution of 3D full-wave Method of Moments (MoM) on an arbitrary mesh of a package-board structure does not guarantee accuracy, since the discretizations may not be fine enough to capture rapid spatial changes in the solution variable. At the same time, uniform over-meshing on the entire structure generates large number of solution variables and therefore requires an unnecessarily large matrix solution. In this work, a suitable refinement criterion for MoM based electromagnetic package-board extraction is proposed and the advantages of the adaptive strategy are demonstrated from both accuracy and speed perspectives.

Biodiesel Exhaust Treatment with Dielectric Barrier Discharges Coupled with Industrial Waste Byproducts

Biodiesel run engines are gaining popularity since the last few years as a viable alternative to conventional petro-diesel based engines. In biodiesel exhaust the content of volatile organic compounds, oil mist, and mass of particulate matter is considerably lower. However, the concentration of oxides of nitrogen (NOx) is relatively higher. In this paper the biodiesel exhaust from a stationary engine is treated under controlled laboratory conditions for removal of NOx using dielectric barrier discharge plasma in cascade with adsorbents prepared from abundantly available industrial waste byproducts like red mud and copper slag. Results were compared with gamma-alumina, a commercial adsorbent. Two different dielectric barrier discharge (DBD) reactors were tested for their effectiveness under Repetitive pulses /AC energization. NOx removal as high as 80% was achieved with pulse energized reactors when cascaded with red mud as adsorbent.

Accelerating method of moments based package-board 3D parasitic extraction using FPGA

In this article, a Field Programmable Gate Array (FPGA)-based hardware accelerator for 3D electromagnetic extraction, using Method of Moments (MoM) is presented. As the number of nets or ports in a system increases, leading to a corresponding increase in the number of right-hand-side (RHS) vectors, the computational cost for multiple matrix-vector products presents a time bottleneck in a linear-complexity fast solver framework. In this work, an FPGA-based hardware implementation is proposed toward a two-level parallelization scheme: (i) matrix level parallelization for single RHS and (ii) pipelining for multiple-RHS. The method is applied to accelerate electrostatic parasitic capacitance extraction of multiple nets in a Ball Grid Array (BGA) package. The acceleration is shown to be linearly scalable with FPGA resources and speed-ups over 10x against equivalent software implementation on a 2.4GHz Intel Core i5 processor is achieved using a Virtex-6 XC6VLX240T FPGA on Xilinx's ML605 board with the implemented design operating at 200MHz clock frequency. (c) 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:776-783, 2016

Incidencia de Cysticercus bovis en la matanza industrial de Nicaragua

En este trabajo, se analizó la situación existente con respecto a la Cysticercosis bovina, en la Empresa Julio Moneada Tercero, ubicada en el Km 11 carretera Norte, departamento de Managua; Esta Empresa cubre el 33% de la matanza industrial en Nicaragua. Con los datos recabados se Evaluaron: Niveles de infestación de los años 1984, 1985, 1988 y 1989; se determinó la infestación por categorías; EL departamento de mayor incidencia; Y las pérdidas económicas. Para el análisis estadístico, el método utilizado fue el de mínimos cuadrados generalizado, usando el procedimiento CATMOD del paquete statistical Analisis System. Los resultados obtenidos en el Análisis de varianza, demuestran que existen diferencias significativas entre años, con un nivel de significancia de P< 0.05 obteniéndose 1.24% de infestación global para los cuatro años, así como también existen diferencias significativas para las diferentes categorías (P< 0.05), siendo la categoría vaca (C2) la más afectada. Matagalpa resultó ser el departamento con el mayor número de animales parasitados seguido de Boaco, Managua y León. Las pérdidas económicas revelan cifras aproximadas de US$ 109,121.50 (ciento nueve mil ciento veinte y un dólares con cincuenta centavos) para el productor, adicionando a esto, las divisas no captadas por un monto aproximado de US$ 653,511.07 (seiscientos cincuenta y tres mil quinientos once dólares con siete centavos) por disminución de las exportaciones.

Residuos de plaguicidas en carne bovina de exportación en el Matadero Industrial Amerrisque

El presente trabajo se realizó en el matadero Amerrisque ubicado a la altura del km 128 carretera el Rama a 130 metros sobre e1 nivel del mar con el objetivo de evaluar los residuos de plaguicidas en carne bovina de exportación. Los datos fueron recopilados de la matanza diaria realizada en dicho matadero a partir del mes de enero de 1987 al mes de diciembre de 1992 a excepción de los meses de marzo, abril, agosto y noviembre del año 1989, de igual forma el año 1990, debido a que los registros ya para este año se encontraron incompletos. Las variables en estudio fueron: Niveles de contaminación aceptable y no aceptable para la exportación, procedencia de dichas carnes, plaguicidas que mayormente se acumulan en 1a carne y las pérdidas económicas. El procedimiento analítico se realizó por medio de una distribución de frecuencias, se hizo uso de medias como estadística descriptiva y también se determinó el rango. Como resultado del presente estudio observamos que la matanza industrial efectuada para los cinco años en estudio fue de 142,919 cabezas, de éstas 18,434 resultaron contaminada con un promedio de contaminación de 0.059 partes por millón, dejándose de percibir USA $ 10,497 dólares.

Laser drilling improving circuit board manufacturing

We reported here a novel technique for laser high speed drillings on Printed Circuit Boards (PCBs). A CNC solid laser based system is developed to drill through and blind vias as an alternative to mechanical drilling. The system employs an Acousto-Optic Q-switched Nd: YAG laser, a computer control system and an X-Y moving table which can handle up to 400 x 400 mm PCB. With a special designed cavity the laser system works in a pulsed operation in order to generate pulses with width down to 0.5 mu s and maximum peak power over 10kW at 10k repetition rate. Delivered by an improved optical beam transforming system, the focused laser beam can drill hobs including blind vias on PCBs with diameter in the range of 0.1 - 0.4 mm and at up to 300 - 500 vias per second (depending on the construction of PCBs). By means of a CNC X-Y moving system, laser pulses with pulse-to-pulse superior repeatability can be fired at desired location on a PCBs with high accuracy. This alternative technology for drilling through or blind vias on PCBs or PWBs (printed wiring boards) will obviously enhance the capability to printed boards manufacturing.

Efecto de tres periodos de suministro de alimento de retiro en broilers en la Empresa Tip-Top industrial, S.A.

En el presente estudio se evaluaron tres periodos de alimento de retiro o acabado en broilers (o, 3, 6 y 9 días antes de la matanza) el cual contiene 3,225 kcal EM/kg de alimento y 19% de proteína, ajustándose a los requerimientos nutricionales recomendados por Arbor Acres Farm Inc., (1992), en especial a la proporción energia-proteina. La evaluación tuvo lugar en la Granja Buenos Aires propiedad de la Empresa Tip-Top Industrial, S.A., con una duración de 42 días, en donde se utilizaron 800 pollos de engorde sin sexar (mixtos) de la línea Peterson-Arbor Acres de un día de edad, dichos pollos fueron distribuidos aleatoriamente en cuatro tratamientos: T1 suministro de alimento de retiro por nueve días), T2 suministro de alimento de retiro por seis días), T3, (Suministro de alimento de retiro por tres días) y T4 (testigo, con cero días de alimento de retiro), con cuatro repeticiones cada uno, distribuidos en un Diseño completamente al Azar sometidos a la prueba de rangos múltiples de Duncan. Las variables estudiadas fueron: consumo de alimento, peso vivo, ganancia de peso, conversión alimenticia, mortalidad vs viabilidad, rendimiento en la canal, análisis económico. No se encontraron diferencias significativas (P<0.05) entre los tratamientos al final del ensayo para el consumo de alimento, conversión alimenticia y costo de alimento, pero no así ara peso vivo y ganancia de peso. El porcentaje de mortalidad acumulada total fue de 2.5% y los rendimientos de la canal fueron: (90.74)T1 (88.98)T2, (85.86)T3,y (90.31)T4, Se corolo que el periodo de suministro de alimento de retiro que permitió los mejores pesos vivos, ganancias de pesos y conversiones alimenticias fue el periodo de tres días (T3), sin embargo, obtuvo el mayor consumo total para generar un peso promedio en la canal de 3.34 lbs, además, presentó el mayor costo alimenticio entre los tratamientos experimentales (T1, T2, T3) y bajo rendimiento en la canal, contrario al T1 que aunque los parámetros productivos fueron menores que el T3 obtuvo el mayor rendimiento en la canal con un menor costo alimenticio. El alimento de retiro no ejerció efecto sobre las variables estudiadas lo que demuestra que dicho alimento pueda ser una alternativa viable para disminuir costo alimenticio.