A Wireless Mesh Network NS-3 Simulation Model: Implementation and Performance Comparison With a Real Test-Bed

Wireless mesh networks present an attractive communication solution for various research and industrial projects. However, in many cases, the appropriate preliminary calculations which allow predicting the network behavior have to be made before the actual deployment. For such purposes, network simulation environments emulating the real network operation are often used. Within this paper, a behavior comparison of real wireless mesh network (based on 802.11s amendment) and the simulated one has been performed. The main objective of this work is to measure performance parameters of a real 802.11s wireless mesh network (average UDP throughput and average one-way delay) and compare the derived results with characteristics of a simulated wireless mesh network created with the NS-3 network simulation tool. Then, the results from both networks are compared and the corresponding conclusion is made. The corresponding results were derived from simulation model and real-worldtest-bed, showing that the behavior of both networks is similar. It confirms that the NS-3 simulation model is accurate and can be used in further research studies.

Size and scaling in the Indian frogs Nyctibatrachus and Nannobatrachus (Ranidae) : a contribution in celebration of the distinguished scholarship of Robert F. Inger on the occasion of his sixty-fifth birthday / H. Bradley Shaffer.

n.s. no.46(1988)

The distribution, size, and reproduction of the pedunculate barnacle, Octolasmis mülleri (Coker, 1902), on the blue crab, Callinectes sapidus (Rathburn, 1896) / William B. Jeffries, Harold K. Voris.

n.s. no.16(1983)

Mice of the Akodon boliviensis size class (Sigmodontinae, Cricetidae), with the description of two new species from Brazil / Philip Hershovitz.

n.s. no.57(1990)

The influence of shell species and size on the shell selection pattern of Paguristes tortugae (Decapoda, Diogenidae) from Anchieta Island (Ubatuba, Brazil)

Shell selection by the hermit crab Paguristes tortugae Schmitt, 1933 from Anchieta Island (Brazil) was analyzed using the six most frequently occupied shell species in the field and taking into account the sexual condition of the individuals, the shell size and the shell species. The experiments were conducted under laboratory conditions and the shell species preference was estimated on the basis of the frequency that each species was chosen by the individuals. The preferred shell species and size were determined by regression analysis. The highest correlation coefficients were obtained for the relations between the hermit dimensions and shell dry weight. The ovigerous females preferred shells with larger internal volume: Leucozonia nassa (Gmelin, 1791) and Cerithium atratum (Born, 1778). In the experiment of shell size, males preferred heavier shells whereas females selected the shape characteristics of the shell, such as the aperture and the internal volume, which are probably related to the growth and offspring guarantee, respectively. In general, and independent of sex condition, P. tortugae showed significant selection among all shells utilized. The results suggest that shell selection by P. tortugae involves sexual and reproductive condition preferences.

Reproductive characteristics of characid fish species (Teleostei, Characiformes) and their relationship with body size and phylogeny

In this study, I investigated the reproductive biology of fish species from the family Characidae of the order Characiformes. I also investigated the relationship between reproductive biology and body weight and interpreted this relationship in a phylogenetic context. The results of the present study contribute to the understanding of the evolution of the reproductive strategies present in the species of this family. Most larger characid species and other characiforms exhibit a reproductive pattern that is generally characterized by a short seasonal reproductive period that lasts one to three months, between September and April. This is accompanied by total spawning, an extremely high fecundity, and, in many species, a reproductive migration. Many species with lower fecundity exhibit some form of parental care. Although reduction in body size may represent an adaptive advantage, it may also require evolutionary responses to new biological problems that arise. In terms of reproduction, smaller species have a tendency to reduce the number of oocytes that they produce. Many small characids have a reproductive pattern similar to that of larger characiforms. On the other hand they may also exhibit a range of modifications that possibly relate to the decrease in body size and the consequent reduction in fecundity. Examples of changes in the general reproductive pattern include the following: reduction in the size of mature oocytes; increase in fecundity; production of several batches of oocytes; an extended reproductive period or even continuous reproduction that allows individuals to reproduce more than once a year; high growth rates; rapid recruitment of juveniles; presence of more than one reproductive cohort that increases the sexually active population; and multiple independent development of insemination as a reproductive strategy. These changes are possibly associated with adaptive pressures that are related to the reduction in body size. In addition, such reproductive characteristics or novelties may reflect the phylogenetic history of a given species.

Clutch size in the small-sized lizard Eurolophosaurus nanuzae (Tropiduridae): does it vary along the geographic distribution of the species?

We studied life history traits of females of the lizard Eurolophosaurus nanuzae (Rodrigues, 1981), an endemic species of rock outcrop habitats in southeastern Brazil. During October 2002 and 2003 we sampled three populations in sites that encompass the meridional portion of the geographic range of the species. Clutch size varied from one to three eggs, with most females carrying two eggs. Clutch size did not vary among populations, but was correlated to female body size. Only larger females produced clutches of three eggs. Females of the small-sized E. nanuzae produce eggs as large as those of medium-sized tropidurids, thus investing a considerable amount of energy to produce clutches resulting in high values of relative clutch mass.

Space-time variation of the relative abundance of Limnoperna fortunei in deep zones of São Gonçalo Channel, Rio Grande do Sul, Brazil

This work describes the spatial-temporal variation of the relative abundance and size of Limnoperna fortunei (Dunker, 1857) collected in São Gonçalo Channel through bottom trawl with a 0.5 cm mesh, at depths between 3 and 6 m. The estimative of mean relative abundance (CPUE) ranged from 2,425.3 individuals per drag (ind./drag) in the spring to 21,715.0 ind./drag in the fall, with an average of 9,515.3 ind./drag throughout the year. The estimated mean density of L. fortunei for the deep region of São Gonçalo Channel ranged from 1.2 to 10.3 ind./m², and it was recorded a maximum density of 84.9 ind./m² in the fall of 2008. The method of sampling using bottom trawl enabled the capture of L. fortunei under the soft muddy bottom of the channel, in different sizes ranging from 0.4 to 3.2 cm. This shows that the structure of the L. fortunei adult population under the bottom of the São Gonçalo Channel is composed mostly of small individuals (<1.4 cm), which represent up to 74% of the population collected.

Shape and size variations of Aegla uruguayana (Anomura, Aeglidae) under laboratory conditions: A geometric morphometric approach to the growth

Crustacean growth studies typically use modal analysis rather than focusing on the growth of individuals. In the present work, we use geometric morphometrics to determine how organism shape and size varies during the life of the freshwater crab, Aegla uruguayana Schmitt, 1942. A total of 66 individuals from diverse life cycle stages were examined daily and each exuvia was recorded. Digital images of the dorsal region of the cephalothorax were obtained for each exuvia and were subsequently used to record landmark configurations. Moult increment and intermoult period were estimated for each crab. Differences in shape between crabs of different sizes (allometry) and sexes (sexual dimorphism; SD) were observed. Allometry was registered among specimens; however, SD was not statistically significant between crabs of a given size. The intermoult period increased as size increased, but the moult frequency was similar between the sexes. Regarding ontogeny, juveniles had short and blunt rostrum, robust forehead region, and narrow cephalothorax. Unlike juveniles crabs, adults presented a well-defined anterior and posterior cephalothorax region. The rostrum was long and stylised and the forehead narrow. Geometric morphometric methods were highly effective for the analysis of aeglid-individual- growth and avoided excessive handling of individuals through exuvia analysis.

Firm Size and Geographical Aggregation: An Empirical Appraisal in Industrial Location

This paper assesses empirically the importance of size discrimination and disaggregate data for deciding where to locate a start-up concern. We compare three econometric specifications using Catalan data: a multinomial logit with 4 and 41 alternatives (provinces and comarques, respectively) in which firm size is the main covariate; a conditional logit with 4 and 41 alternatives including attributes of the sites as well as size-site interactions; and a Poisson model on the comarques and the full spatial choice set (942 municipalities) with site-specific variables. Our results suggest that if these two issues are ignored, conclusions may be misleading. We provide evidence that large and small firms behave differently and conclude that Catalan firms tend to choose between comarques rather than between municipalities. Moreover, labour-intensive firms seem more likely to be located in the city of Barcelona. Keywords: Catalonia, industrial location, multinomial response model. JEL: C250, E30, R00, R12

The Determinants of Entry are not Independent of Start-up Size: Some evidence from Spanish manufacturing

In this paper we explore the determinants of firm start-up size of Spanish manufacturing industries. The industries' barriers to entry affect the ability of potential entrants to enter the markets and the size range at which they decide to enter. In order to examine the relationships between barriers to entry and size we applied the quantile regression techniques. Our results indicate that the variables that characterize the structure of the market, the variables that are related to the behaviour of the incumbent firms and the rate of growth of the industries generate different barriers depending on the initial size of the entrants. Keywords: Entry, regression quantiles, start-up size. JEL classification: L110, L600

A territorial approach to firm entry: The effect of city size

This paper concerns the effects of territorial factors on the processes involved in the creation of manufacturing firms in Spanish cities. Most contributions have focused on regional factors rather than urban ones. Here we assume that it is possible to identify certain urban factors that attract new firms. We use data for the entry of firms in Spanish manufacturing industries between 1994 and 2002. This paper contributes to the existing literature on market entry. Key words: cities, regions, firm entry and Spanish economy. JEL: R0, R12, L60

Firm Size and Short-Term Dynamics in Aggregate Entry and Exit

Much of the research on industry dynamics focuses on the interdependence between the sectorial rates of entry and exit. This paper argues that the size of firms and the reaction-adjustment period are important conditions missed in this literature. I illustrate the effects of this omission using data from the Spanish manufacturing industries between 1994 and 2001. Estimates from systems of equations models provide evidence of a conical revolving door phenomenon and of partial adjustments in the replacement-displacement of large firms. KEYWORDS: aggregation, industry dynamics, panel data, symmetry, simultaneity. JEL CLASSIFICATION: C33, C52, L60, L11

Data size sufficiency analyses of haplotype inference algortihms

We present experimental and theoretical analyses of data requirements for haplotype inference algorithms. Our experiments include a broad range of problem sizes under two standard models of tree distribution and were designed to yield statistically robust results despite the size of the sample space. Our results validate Gusfield's conjecture that a population size of n log n is required to give (with high probability) sufficient information to deduce the n haplotypes and their complete evolutionary history. The experimental results inspired our experimental finding with theoretical bounds on the population size. We also analyze the population size required to deduce some fixed fraction of the evolutionary history of a set of n haplotypes and establish linear bounds on the required sample size. These linear bounds are also shown theoretically.

Arquitectura wormhole per a una NoC 2D-Mesh

Aquest projecte presenta la implementació d'un disseny, i la seva posterior síntesi en una FPGA, d'una arquitectura de tipus wormhole packet switching per a una infraestructura de NetWork-On-Chip amb una topologia 2D-Mesh. Agafant un router circuit switching com a punt de partida, s'han especificat els mòduls en Verilog per tal d'obtenir l'arquitectura wormhole desitjada. Dissenyar la màquina de control per governar els flits que conformen els paquets dins la NoC,i afegir les cues a la sortida del router (outuput queuing) són els punts principals d'aquest treball. A més, com a punt final s'han comparat ambdues arquitectures de router en termes de costos en àrea i en memòria i se n’han obtingut diverses conclusions i resultats experimentals.