Sobre el papel del bibliotecólogo

Sin duda el lenguaje fue el primero y más importante instrumento, utilizado en sus inicios, por el hombre para transmitir los conocimientos e información adquirida.Mediante este medio y la memoria, se conservaron y transmitieron tradiciones, rituales, leyendas, plegarias y toda clase de conocimientos de generación en generación. Por ejemplo, en la antigüedad los ancianos de Israel usaban la "mnemotecnia" para transmitir el patrimonio religioso y cultural de su pueblo. Estos podían memorizar el Talmud y la Biblia sin problema y transmitirlos a sus descendientes y discípulos.Con el surgimiento de la escritura, en la noche de los tiempos, el hombre se da cuenta de que sus pensamientos y conocimientos es posible estamparlos por medio de símbolos en rocas, corteza vegetal y cualquier otro material a su alcance, logrando mayor permanencia y tangibilidad. Esto provocó la producción y acumulación de tablillas, papiros y otros materiales escritos, que debían ser custodiados y conservados por personas, que en las bibliotecas más antiguas correspondió a los sacerdotes (pues muchas estaban ubicadas en los templos por considerarse obras sagradas) o al cuidado de sabios y letrados como en la antigua Alejandría.

Phenolic profile and antimicrobial activity of dietary supplements based on Cochlospermum angolensis Welw.

Cochlospermum angolensis Welw. (borututu) is a widespread tree in Angola that belongs to the Cochlospermaceae family. Its bark infusion is used in the traditional medicine of Angola for the treatment of jaundice, hepatic diseases and for the prophylaxis of malaria [1]. In the present work, three formulations based on this plant (infusion, pills, and syrup) were characterized by HPLC-DAD-ESI/MS regarding phenolic composition, and evaluated by their in vitro antimicrobial activity against isolates of multiresistant bacteria (Escherichia coli, Escherichia coli spectrum extended producer of β-lactamases (ESBL), Proteus mirabilis, methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa). The infusion and pills revealed the highest variety of phenolic compounds, with eleven compounds identified. Protocatechuic acid was only present in infusions, being the most abundant compound, while (epi)gallocatechin-O-gallate and eucaglobulin/globulusin were the main molecules identified in pills and syrup, respectively. Methyl ellagic acids, eucaglobulin/globulusin B (Fig. 1) and (epi)gallocatechin-O-gallate were found in all the formulations. The infusion revealed antimicrobial activity against all the studied bacteria with the exception of P. mirabilis whereas the pills revealed activity in E. coli ESBL and MRSA. No significant antimicrobial activity was detected in the syrup, in agreement with its low concentrations of phenolic compounds. None of the tested formulations inhibited P. mirabilis. Considering the obtained results, C. angolensis infusion can be considered a good source of phenolic compounds as well as a good antimicrobial agent.

EVALUATION OF THE ANTI-FUNGAL PROPERTIES OF EXTRACTS OF Daniella oliveri

The in vitro anti-fungal activity of leaf and stem bark of Daniella oliveri Rolfe was investigated against selected yeasts and moulds including dermatophytes. Water and methanol were used to extract the powdered leaf and stem bark using cold infusion. Antimicrobial activity was assessed by agar-well diffusion. Phytochemical analysis was carried out using standard procedures. The plant extracts were active against the test organisms at concentrations ranging from 3.125-100 mg/mL. The methanol extracts were more active than the aqueous extracts with the highest inhibition against the yeasts, Candida albicans and Candida krusei (MIC values of 3.125 mg/mL and 6.25 mg/mL respectively). Epidermophyton floccosum and Trichophyton interdigitale were the least inhibited of all the fungal strains. Phytochemical screening revealed the presence of tannins, anthraquinones, flavonoids, cardiac glycosides, alkaloids and saponins. The anti-fungal activity of Daniella oliveri as shown in this study indicates that the plant has the potential of utilisation in the development of chemotherapeutic agents for the treatment of relevant fungal infections.

Desenvolvimento e caracterização de compósito a partir da borra da piaçava para construção da parábola de um fogão solar a concentração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Towards understanding resprouting at the global scale

Understanding and predicting plant response to disturbance is of paramount importance in our changing world. Resprouting ability is often considered a simple qualitative trait and used in many ecological studies. Our aim is to show some of the complexities of resprouting while highlighting cautions that need be taken in using resprouting ability to predict vegetation responses across disturbance types and biomes. There are marked differences in resprouting depending on the disturbance type, and fire is often the most severe disturbance because it includes both defoliation and lethal temperatures. In the Mediterranean biome, there are differences in functional strategies to cope with water deficit between resprouters (dehydration avoiders) and nonresprouters (dehydration tolerators); however, there is little research to unambiguously extrapolate these results to other biomes. Furthermore, predictions of vegetation responses to changes in disturbance regimes require consideration not only of resprouting, but also other relevant traits (e.g. seeding, bark thickness) and the different correlations among traits observed in different biomes; models lacking these details would behave poorly at the global scale. Overall, the lessons learned from a given disturbance regime and biome (e.g. crown-fire Mediterranean ecosystems) can guide research in other ecosystems but should not be extrapolated at the global scale.

Immunomodulatory activity of methanol extract of Adansonia digitata L

Purpose: To evaluate the immune-modulatory activities of various plant parts Adansonia digitata L. using delayed-type hypersensitivity rat model. Methods: Defatted leaf, root bark and fruit pulp of A. digitata were extracted with methanol. Immunomodulatory activity of the methanol extracts (250 and 500 mg/kg) were evaluated in sheep RBC (SRBC)-induced delayed-type hypersensitivity model, cell mediated immune re-sponse and phagocytic activity using carbon clearance test. Results: The extracts exhibited significant increase in delayed-type hypersensitivity reaction, indicating the ability of the extracts to stimulate T-cells. It also increased SRBC induced anti-body titer in immunesuppressed rats, and produced significant increase in phagocytic index by rapid removal of carbon particles from the blood stream. Conclusion: These results indicate that methanol extracts of the leaf, root bark and fruit pulp of A. digitata hold promise as immunemodulatory agents.

Avaliação da espécie vegetal Croton cajucara Benth como inibidor de biocorrosão em aço carbono Aisi 1020

Actually in the oil industry biotechnological approaches represent a challenge. In that, attention to metal structures affected by electrochemical corrosive processes, as well as by the interference of microorganisms (biocorrosion) which affect the kinetics of the environment / metal interface. Regarding to economical and environmental impacts reduction let to the use of natural products as an alternative to toxic synthetic inhibitors. This study aims the employment of green chemistry by evaluating the stem bark extracts (EHC, hydroalcoholic extract) and leaves (ECF, chloroform extract) of plant species Croton cajucara Benth as a corrosion inhibitor. In addition the effectiveness of corrosion inhibition of bioactive trans-clerodane dehydrocrotonin (DCTN) isolated from the stem bark of this Croton was also evaluated. For this purpose, carbon steel AISI 1020 was immersed in saline media (3,5 % NaCl) in the presence and absence of a microorganism recovered from a pipeline oil sample. Corrosion inhibition efficiency and its mechanisms were investigated by linear sweep voltammetry and electrochemical impedance. Culture-dependent and molecular biology techniques were used to characterize and identify bacterial species present in oil samples. The tested natural products EHC, ECF and DCTN (DMSO as solvent) in abiotic environment presented respectively, corrosion inhibition efficiencies of 57.6% (500 ppm), 86.1% (500 ppm) and 54.5% (62.5 ppm). Adsorption phenomena showed that EHC best fit Frumkin isotherm and ECF to Temkin isotherm. EHC extract (250 ppm) dissolved in a polar microemulsion system (MES-EHC) showed significant maximum inhibition efficiency (93.8%) fitting Langmuir isotherm. In the presence of the isolated Pseudomonas sp, EHC and ECF were able to form eco-compatible organic films with anti-corrosive properties

Anthrone and oxanthrone C,O-diglycosides from Picramnia teapensis

Two C,O-diglycosylated compounds, the anthrone picramnioside F, and the oxanthrone mayoside C, were isolated from the stem bark of Picramnia teapensis, along with the previously reported anthraquinones, 1-O-beta -D- and 8-O-beta -D-glucopyranosyl emodin. The compounds were separated by recycling-HPLC, and their structures were determined on the basis of spectroscopic analysis. CD measurements were used to establish the absolute configuration of the anthrone and oxanthrone. The antifungal activity of 1-O-beta -D- and 8-O--D-glucopyranosyl emodin against Leucoagaricus gongilophorus was shown to be similar to that of the lignan sesamin. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

ANALYSIS OF POPULUS TREMULOIDES CLONAL VARIATION AND DELINEATION IN THE OTTAWA NATIONAL FOREST

The technique of delineating Populus tremuloides (Michx.) clonal colonies based on morphology and phenology has been utilized in many studies and forestry applications since the 1950s. Recently, the availability and robustness of molecular markers has challenged the validity of such approaches for accurate clonal identification. However, genetically sampling an entire stand is largely impractical or impossible. For that reason, it is often necessary to delineate putative genet boundaries for a more selective approach when genetically analyzing a clonal population. Here I re-evaluated the usefulness of phenotypic delineation by: (1) genetically identifying clonal colonies using nuclear microsatellite markers, (2) assessing phenotypic inter- and intraclonal agreement, and (3) determining the accuracy of visible characters to correctly assign ramets to their respective genets. The long-term soil productivity study plot 28 was chosen for analysis and is located in the Ottawa National Forest, MI (46° 37'60.0" N, 89° 12'42.7" W). In total, 32 genets were identified from 181 stems using seven microsatellite markers. The average genet size was 5.5 ramets and six of the largest were selected for phenotypic analyses. Phenotypic analyses included budbreak timing, DBH, bark thickness, bark color or brightness, leaf senescence, leaf serrations, and leaf length ratio. All phenotypic characters, except for DBH, were useful for the analysis of inter- and intraclonal variation and phenotypic delineation. Generally, phenotypic expression was related to genotype with multiple response permutation procedure (MRPP) intraclonal distance values ranging from 0.148 and 0.427 and an observed MRPP delta value=0.221 when the expected delta=0.5. The phenotypic traits, though, overlapped significantly among some clones. When stems were assigned into phenotypic groups, six phenotypic groups were identified with each group containing a dominant genotype or clonal colony. All phenotypic groups contained stems from at least two clonal colonies and no clonal colony was entirely contained within one phenotypic group. These results demonstrate that phenotype varies with genotype and stand clonality can be determined using phenotypic characters, but phenotypic delineation is less precise. I therefore recommend that some genetic identification follow any phenotypic delineation. The amount of genetic identification required for clonal confirmation is likely to vary based on stand and environmental conditions. Further analysis, however, is needed to test these findings in other forest stands and populations.

Reforestation challenges in Scandinavia

In the keynote, major reforestation challenges in Scandinavia will be highlighted. The following countries make up Scandinavia: Iceland, Norway, Sweden, Finland and Denmark. For Iceland, with only a forest cover of 2%, a major reforestation challenge is the deforestation and overgrazing in combination with land degradation and extensive soil erosion. The challenges include the conflicts with livestock farmers. For centuries the commons were used for sheep and horse grazing. However, more and more of farmer grazing land have been fenced up, allowing the regeneration of birch and plantations of other species to increase. With a forest cover of 37% and 69% respectively, for decades a major reforestation challenge in Norway and Sweden has been the risk of seedling damages from the pine weevil. Unprotected seedlings can have a survival rate of less than 25% after being planted. Pine weevils feed on the bark of planted young seedlings at regeneration sites. If the seedling is girdled, it will not survive. In Sweden, and soon in Norway, pesticides have been forbidden. In the keynote, new methods and technology will be presented based on non-chemical protection. In Finland, with a forest cover of 75%, a major reforestation challenge is linked to the forest structure. The structure of Finnish forestry includes many private forests in combination with small regeneration sites. This implies a situation where logistics and methods for lifting and field storage provide a major challenge in order to preserve seedling quality until the planting date. Due to this situation, new logistic systems and technologies are being developed in Finland, including new seedling cultivation programs (including cultivation under Light Emitting Diodes (LEDs)) to match the access of fresh planting stock to different planting dates. In Denmark, with a forest cover of 13%, a major reforestation challenge is the possibility of future plantations based on a wide range of relevant species. For this to become a realistic option, new methods and technology have to be developed in reforestation activities that support this possibility. These methods and technology should make it possible to not be limited to certain species due to problems and restrictions during field establishment. This due to the prospect of establishing stable, healthy, and productive stands of various forest species that can be adapted to future climate change.

Performance of concrete incorporating amorphous silica residue and biomass fly ash

L'industrie du ciment est l'une des principales sources d'émission de dioxyde de carbone. L'industrie mondiale du ciment contribue à environ 7% des émissions de gaz à effet de serre dans l'atmosphère. Afin d'aborder les effets environnementaux associés à la fabrication de ciment exploitant en permanence les ressources naturelles, il est nécessaire de développer des liants alternatifs pour fabriquer du béton durable. Ainsi, de nombreux sous-produits industriels ont été utilisés pour remplacer partiellement le ciment dans le béton afin de générer plus d'économie et de durabilité. La performance d'un additif de ciment est dans la cinétique d'hydratation et de la synergie entre les additions et de ciment Portland. Dans ce projet, deux sous-produits industriels sont étudiés comme des matériaux cimentaires alternatifs: le résidu de silice amorphe (RSA) et les cendres des boues de désencrage. Le RSA est un sous-produit de la production de magnésium provenant de l'Alliance Magnésium des villes d'Asbestos et Thedford Mines, et les cendres des boues de désencrage est un sous-produit de la combustion des boues de désencrage, l'écorce et les résidus de bois dans le système à lit fluidisé de l'usine de Brompton située près de Sherbrooke, Québec, Canada. Récemment, les cendres des boues de désencrage ont été utilisées comme des matériaux cimentaires alternatifs. L'utilisation de ces cendres comme matériau cimentaire dans la fabrication du béton conduit à réduire la qualité des bétons. Ces problèmes sont causés par des produits d'hydratation perturbateurs des cendres volantes de la biomasse quand ces cendres sont partiellement mélangées avec du ciment dans la fabrication du béton. Le processus de pré-mouillage de la cendre de boue de désencrage avant la fabrication du béton réduit les produits d'hydratation perturbateurs et par conséquent les propriétés mécaniques du béton sont améliorées. Les approches pour étudier la cendre de boue de désencrage dans ce projet sont : 1) caractérisation de cette cendre volante régulière et pré-humidifiée, 2) l'étude de la performance du mortier et du béton incorporant cette cendre volante régulière et pré-humidifiée. Le RSA est un nouveau sous-produit industriel. La haute teneur en silice amorphe en RSA est un excellent potentiel en tant que matériau cimentaire dans le béton. Dans ce projet, l'évaluation des RSA comme matériaux cimentaires alternatifs compose trois étapes. Tout d'abord, la caractérisation par la détermination des propriétés minéralogiques, physiques et chimiques des RSA, ensuite, l'optimisation du taux de remplacement du ciment par le RSA dans le mortier, et enfin l'évaluation du RSA en remplacement partiel du ciment dans différents types de béton dans le système binaire et ternaire. Cette étude a révélé que le béton de haute performance (BHP) incorporant le RSA a montré des propriétés mécaniques et la durabilité, similaire du contrôle. Le RSA a amélioré les propriétés des mécaniques et la durabilité du béton ordinaire (BO). Le béton autoplaçant (BAP) incorporant le RSA est stable, homogène et a montré de bonnes propriétés mécaniques et la durabilité. Le RSA avait une bonne synergie en combinaison de liant ternaire avec d'autres matériaux cimentaires supplémentaires. Cette étude a montré que le RSA peut être utilisé comme nouveaux matériaux cimentaires dans le béton.

Avian trait-mediated vulnerability to road traffic collisions

Collision with vehicles is an important source of bird mortality, but it is uncertain why some species are killed more often than others. Focusing on passerines,we testedwhether mortality is associated with bird abundances, and with traits reflecting flight manoeuvrability, habitat, diet, and foraging and social behaviours. We also tested whether the species most vulnerable to road-killing were scarcer near (b500 m) or far (N500–5000 m) from roads. During the breeding seasons of 2009–2011,we surveyed roadkills daily along 50 km of roads, and estimated bird abundances from 74 point counts. After correcting for phylogenetic relatedness, there was strong correlation between roadkill numbers and the abundances of 28 species counted near roads. However, selectivity indices indicated that Blue tit (Parus caeruleus), Blackcap (Sylvia atricapilla) and European goldfinch (Carduelis carduelis) were significantly more road-killed than expected from their abundances, while the inverse was found for seven species. Using phylogenetic generalised estimating equations, we found that selectivity indexes were strongly related to foraging behaviour and habitat type, and weakly so to body size, wing load, diet and social behaviour. The most vulnerable passerines were foliage/bark and swoop foragers, inhabiting woodlands, with small body size and low wing load. The species most vulnerable to road collisions were not scarcer close to roads. Overall, our study suggests that traits provide a basis to identify the passerine species most vulnerable to road collisions, which may be priority targets for future research on the population-level effects of roadkills.

Creative Practices Around the Production of Cork

Cork, as a natural product provided by the bark of the cork oak tree, is an important staple of the Portuguese economy and important to Portuguese culture. It is a sustainable product with a positive ecological footprint, from harvesting to industrial production, with the advantage of creating a local economic model through regional labour activity and distribution. Within the balance between nature-human-economy to create a sustainable system, cork production in Portugal represents a human and social dimension. By focusing on that dimension and by creating an awareness of the cultural and social impact of the activity and by re-appraising the meaning of the material within the culture, the study reframes a consideration of the actual place of labour and production. The human, geophysical, historical, social, economic, ecological and cultural aspects of the place are observed as regards their relation to work or labour in that physical space. A pilot study is being developed in the village of Azaruja in the district of Évora, Portugal. In this small locality, cork is very important in terms of the relationships between the physical subsistence of their residents and the local natural resources, because it structures the place in its cultural, social and economical dimensions. This paper outlines the theoretical foundations, the process and the outcomes of the participatory ecodesign project titled Creative Practices Around the Production of Cork which was initiated by a Portuguese artist/design researcher and developed further through the collaboration with the other two authors, one a Portuguese visual artist/researcher and the other a Turkish fashion designer/theorist. The investigation focuses on questions that expand the notion of place for artists and designers, filtered through the lenses of manual labourers in order to understand their physical, social, cultural and economic relationship with the environment. To create the process of interaction with the place and the people, a creative collaborative dynamic is developed between the authors with their range of artistic sensibilities and the local population. To adopt a holistic notion of sustainability and cultural identity a process of investigation is designated to: (1) analyse, test and interpret - through the dissemination of life stories, visual representation of the place and the creation of cork objects - the importance of culture related to the labour activity of a local natural resource that determines and structures the region; (2) to give public recognition to those involved, taking into account their sense of belonging to the place and in order to show the value of their sustainable labour activities related to local natural resources; (3) to contribute to the knowledge of the place and to its dynamism through an aesthetic approach to labour activities. With reference to fields of knowledge such as anthropology, the social arts and sustainable design, a practice-based research is conducted with collaborative and participatory design methods to create an open model of interaction which involves local people in the realization of the project. Outcomes of this research will be presented in the paper as a survey analysis with theoretical conclusions.

Produção e distribuição da biomassa de Jatropha curcas no Semiárido Brasileiro.

RESUMO: Com o objetivo de avaliar a produção e distribuição da biomassa da parte aérea de diferentes genótipos de pinhão-manso no semiárido brasileiro, foi implantado um experimento na Fazenda Gabriela, localizada no município de Santa Maria da Boa Vista, Pernambuco. O delineamento experimental adotado foi em blocos casualizados, com dez tratamentos (genótipos de pinhão-manso) e três repetições, em parcelas lineares de seis plantas, com bordadura simples e espaçamento de 3,0 x 2,0 m. Foram aplicadas uma adubação correspondente a 150 g de NPK (06:24:12) por cova no plantio e duas adubações de cobertura com 150 g.planta-1 de NPK (10:10:10) aos seis e aos doze meses de idade. As plantas foram irrigadas semanalmente por gotejamento com uma aplicação média de 20 litros de água por planta durante o período de estiagem da região. Aos 24 meses de idade, foi medida a altura total das plantas, o diâmetro médio das bifurcações a 1,30 m da superfície do solo e o número de bifurcações a 0,5 m de altura. Foram feitas 26 colheitas semanais de frutos/sementes. Os frutos foram colhidos maduros, antes de sua queda ao chão, durante sete meses. Os genótipos apresentaram elevada uniformidade agronômica, exceto para a variável número de bifurcações, onde o genótipo 1701 foi superior aos genótipos 1501, 1602, 1703 e 1601. A produção de biomassa dos genótipos em condições irrigadas no semiárido é elevada e a distribuição da biomassa dos genótipos nos diferentes componentes seguiu a ordem decrescente: raiz>frutos>galhos grossos>folhas>casca>galhos finos. ABSTRACT: In order to assess production and distribution of biomass shoots of different genotypes of Jatropha curcas under irrigation in the semiarid region of Pernambuco, Brazil, an experiment was established in Gabriela Farm, in the municipality of Santa Maria da Boa Vista-PE. The experimental design was randomized blocks with ten treatments (genotypes of Jatropha curcas), and three replications in row plots of six plants, with a single border and spacing of 3.0 x 2.0 m. Plants were fertilized with 150 g of NPK (06:24:12) at planting time, and a topdressing with 150 g.planta-1 NPK (10:10:10) applied at six and twelve months of age. The plants were irrigated weekly using a dripping system with an average water application of 20 l.plant-1 during the dry period of the region. At 24 months of age, the overall height of the plants, the average diameter of bifurcations at 1.30m from the soil level and the number of bifurcations at 0.5 m of height were evaluated. Twenty six fruit/ seed harvests were done weekly. Fruits were harvested ripe, before falling on the ground, for seven months. To determine dry biomass, the plants were cut at 0.30 m from soil level. The genotypes showed high agronomic uniformity, except for the variable number of bifurcations, where the genotype 1701 was superior to the genotypes 1501, 1602, 1703 and 1601. Biomass production of genotypes in irrigated conditions in the semiarid region is high and the distribution of biomass followed the decreasing order: root>fruit>thick branches>leaves>bark>thin branches.