Nivel de mercurio en cabello de ninos peruanos expuestos en una zona minera de Arequipa y de la ciudad de Lima

Objetivo: El propósito del estudio fue comparar los niveles de mercurio en cabello en dos muestras de ninos peruanos provenientes de dos zonas geográficas distintas: una zona rural minera y una zona urbana. Material y métodos: La zona minera correspondió al poblado de Mollehuaca (Arequipa), de donde se obtuvieron 52 muestras de cabello; la zona urbana no expuesta a minería correspondió al distrito de Los Olivos (Lima), de donde se obtuvieron 40 muestras. Se determinó el nivel de mercurio con la técnica estandarizada de plasma de inducción acoplado con un espectrómetro de masas (ICP-MS). Resultados: En la zona rural, en promedio, se obtuvo un nivel de mercurio de 7,47 ppb±26,9. En la zona urbana, el nivel de mercurio alcanzó un promedio de 2,47 ppb±1,28. No se encontraron diferencias significatives en el nivel de mercurio según edad o género. Conclusión: Se concluye que el grupo expuesto a minería aurífera informal y de zona rural presentó niveles de mercurio en cabello en promedio mayores a los del grupo de zona urbana, pero esta diferencia no fue significativa (p=0,188, α=0,05).

Síntese e avaliação da atividade fitotóxica de derivados da α-Santonina

Mixtures of α-Santonin and various solvents were irradiated by either high or low pressure mercury lamps. The photochemical reactions afforded lumisantonin (11) (76% in acetonitrile), (3S,3aS,9bS)-3,6,6-trimethyl-3,3a,4,5-tetrahydronafto[1,2-b]furan-2,7(6H,9bH)dione (12) (100% in acetonitrile), 10α-acetoxy-3-oxo-1,7αH,6,11βH-guaia-4-en-6,12-olide (8) (26% in acetic acid), 10α-hydroxy-3-oxo-1,7αH,6,11βH-guaia-4-en-6,12-olide (10) (32%) and (E)-3-((3S,3aS,7aS)-3-methyl-2-oxo-6-(propan-2-ylidene)hexahydrobenzofuran-7-(7aH)-ylidene)propanoic acid (9) (44%) (in water/ acetic acid 1:1, v/v). Lactone 12 was also prepared by irradiation of lumisantonin in diethyl ether. Lactones 8 and 10 were converted, respectively, into the 10α-acetoxy-3β-hydroxy-1,7αH,6,11βH-guaia-4-en-6,12-olide (13) (87%) and 3β,10α-dihydroxy-1,7αH,6,11βH-guaia-4-en-6,12-olide (14) (75%) by sodium borohydride reduction. The effects of the compounds on the development of radicle of Sorghum bicolor and Cucumis sativus were evaluated.

Métodos para fabricação de microeletrodos visando a detecção em microambientes

Analysis at microenvironments, like single cells or in minute volumes (nL), is an area of great interest for analytical and biological sciences. Measurements at these experimental conditions demand analytical tools (microelectrodes) capable of monitoring with rapid response, good resolution and minimal perturbation of the system. The major drawbacks in producing these microscopic electrodes have been largely overcome, principally due to the development of new fabrication methods. In this review, these procedures are described with emphasis to those devoted to the construction of microelectrodes for application in microenvironments. Examples of our efforts to use these devices as effective electrochemical sensors are also addressed.

Transferência trófica de mercúrio e selênio na costa norte do Rio de Janeiro

Trophic transfer of trace elements along marine food chains has been recognized as an important process influencing metal and metalloid bioaccumulation. The trophic transfer of mercury was observed between trophic levels from prey (considering fish with different feeding habits and squid) to top predator (dolphin) in a Northern coastal food chain of Rio de Janeiro. Selenium showed some evidence of trophic transfer between lower trophic levels. Dolphin presented the highest mercury concentrations whereas the benthic carnivorous fish showed the highest selenium concentrations. Mercury is biomagnified through the food chain while selenium does not present the same behavior.

Distribuição de Hg total e suas associações com diferentes suportes geoquímicos em sedimentos marinhos da margem continental brasileira: Bacia de Campos - Rio de Janeiro

Mercury distribution and geochemical support on the Continental Margin was evaluated at the Campos Basin, Rio de Janeiro state, Brazil. The average concentrations for all analyzed elements were, respectively, 20 ± 5 ng g-1 (Hg); 30 ± 14 mg g-1 (Al); 16 ± 6 mg g-1 (Fe), and 254 ± 83 µg g-1 (Mn). Silt and clay content, total carbonate and Hg, and organic carbon increased with depth. Finally, the relationship between Hg and silt clay showed significant positive correlation. Total Hg concentrations are the background level described primarily (~40 ng g-1).

Degradação fotocatalítica do fungicida tebuconazole em solução aquosa

The tebuconazole photocatalytic degradation kinetics was studied in a batch reactor using TiO2 (P25-Degussa) as catalyst and a high pressure mercury lamp. The photolysis, adsorption and irradiation effects in the reaction rate were evaluated. Afterward, the suspension catalyst concentration and initial pH to the maximum reaction rate was determined. It was observed that the reaction rate can be approached by a pseudo-first order, with a maximum kinetics constant at 260 mg L-1catalyst concentration and pH 7.7.

Comportamento do mercúrio em perfis de solos do sítio Ilha de Terra-Caxiuanã, Pará

Behavior of mercury in soil profiles with archaeological black earth (ABE) and surroundings area (SA) from Sítio Ilha de Terra, Caxiuanã, can provide information on anthropogenic activity of the Amazonian habitat. The samples of ABE and SA soil profiles were submitted to mineralogical chemical (total and sequential) analysis. The data show that the Hg occurs mainly in goethite and kaolinite in the two soil profiles. The highest concentrations of Hg and Fe are observed in the SA profile. These results indicate that the prehistoric human occupation contributed to the decrease of the concentration of Hg in soil ABE from Caxiuanã.

Validação de metodologia analítica para determinação de mercúrio total em amostras de urina por espectrometria de absorção atômica com geração de vapor frio (CV-AAS): estudo de caso

Mercury is a toxic metal used in a variety of substances over the course history. One of its more dubious uses is in dental amalgam restorations. It is possible to measure very small concentrations of this metal in the urine of exposed subjects by the cold vapor atomic absorption technique. The present work features the validation as an essential tool to confirm the suitability of the analytical method chosen to accomplish such determination. An initial analysis will be carried out in order to evaluate the environmental and occupational levels of exposure to mercury in 39 members of the auxiliary dental staff at public consulting rooms in the city of Araguaína (TO).

Síntese e caracterização estrutural do ligante isatina-3-(N4-benziltiossemicarbazona) e do seu complexo de mercúrio(II)

The reaction of 4-(phenyl)thiosemicarbazide with isatin yielded a new ligand, isatin-3-(N4-benzylthiosemicarbazone). Isatin-3-(N4-benzylthiosemicarbazone) deprotonated in ethanol/KOH reacts with an ethanolic solution of Hg(NO3)2 to give a mercury complex. The compounds were characterized by IR and X-ray single crystal structure determination. The X-ray studies revealed that the complex possesses a tetrahedral geometry with two deprotonated thiosemicarbazone ligands coordenated. The ligand and its mercury complex crystallize in the monoclinic (P2(1)/c) and triclinic (P-1) crystal system, respectively.

Poluição por mercúrio em aterros urbanos do período colonial no extremo sul do Brasil

Land reclamation fills in the city of Rio Grande (RS) are polluted by mercury with concentrations ranging from 0.3 to 18.7 mg kg-1. The level of Hg pollution decreases from the oldest landfills of 18th century to recent ones. Mercury distribution along vertical profiles resembles the same for copper, lead, and zinc, what allow supposing that mercury distribution has an autochthonous character. It is suggested that the principal source of mercury pollution was the activities related to animal skin and fair hair treatment, using ancient technology known as "carroting". Similar scenario of environmental risk could be met in other Brazilian cities with similar colonization history.

Reator de UV-Ozônio com lâmpada a vapor de mercúrio a alta pressão modificada para tratamento superficial de óxidos transparentes condutivos utilizados em dispositivos poliméricos eletroluminescentes

An UV-Ozone reactor was developed with an ignition tube extracted into HID mercury lamp used to irradiation on zinc oxide (ZnO) and fluorinated tin oxide (FTO) films for PLEDs devices. Different exposures times were used. In contact angle measurements revealed better results for ZnO and FTO by 15 and 5 min, respectively. In Diffuse Reflectance Infra-red Fourier Transformed (DRIFT) spectroscopy allowed the observation of water, hydrocarbon and carbon dioxide adsorbed on the untreated TCO surfaces. After the UV-Ozone treatment the contaminants were significantly reduced or eliminated and the PLEDs devices decreased threshold voltages in comparison with respectively untreated TCOs.

Isolamento e seleção de micro-organismos resistentes e capazes de volatilizar mercúrio

Mercury (Hg) occurs in the environment as a natural and anthropogenic element, and through the years the accumulation of mercury has affected the integrity of ecosystems and human health. This study presents a screening of microorganisms resistant to organic and inorganic mercury, the determination of the minimum inhibitory concentration of Hg, the estimation of the mercury volatilization by selected microorganisms and the dynamics of volatilization. Eight Gram-negative bacteria resistant to high concentrations of mercury (60 to 210 mg L-1) were selected, and these isolates showed ability to volatilize the metal. The dynamics of the volatilization of the Proteus mirabilis M50C demonstrated that in only 4 h of incubation it was possible to volatilize 72% of the mercury present in the culture. The results showed promising application for bioremediation strategies.

Determinação da densidade de corrente de corrosão em meios de baixa condutividade: uso de microeletrodos para minimizar a queda ôhmica

The gravimetric and electrochemical tests are the most common techniques used in determining the corrosion rate. However, the use of electrochemical polarization is limited to electrolytes with sufficient conductivity for which Tafel curves are linear. In this study, we investigated a technique in which working microelectrodes of AISI 1020 steel were used to obtain the Tafel curves in diesel oil. The strategy was to reduce the electrode area and hence the ohmic drop. The diameter of the microelectrode was reduced to a value where the compensation of the Tafel curves became unnecessary. The results showed that for electrodes with diameters below 50 μm, the ohmic drop tends to a minimum and independent of the microelectrode diameter.

Utilização de eletrodos sólidos de amálgama para a determinação analítica de compostos orgânicos e inorgânicos

This review reports the use of solid amalgam electrodes in the electroanalytical determination of organic and inorganic compounds. The different types of amalgam electrodes are presented, and attention is paid to solid amalgam electrode, and here is presented details about the pre-treatment for activation and renovation and also possible modifications in its surface. The wide potential range, higher signal-to-noise ratio, mechanical stability enabling their application in flowing systems, and principally their resistance toward passivation, indicate that the solid amalgam electrodes are environmentally friendly alternatives to mercury electrodes, without loss in the sensitivity and reproducibility in voltammetric responses.

Influência das características físico-químicas dos solos no ciclo hidrobiogeoquímico do mercúrio na região do Rio Aracá - AM

The region of Aracá River (Middle and Upper Rio Negro-AM) has peculiar characteristics, having soils with atypical profile and high organic matter contents in great deep. The levels of aluminum and iron in the soil samples increased as a function of depth and concentrations of mercury ranged from 0.097 to 0.964 µg g-1. Statistical analysis showed the degree of similarity between soil samples collected. The highest concentrations of mercury in soil samples are directly related to soil higher content of organic matter, directly influencing the fate and bioavailability of mercury species to the environment.