Ciclo de cogeração a partir de resíduos de poda de árvores na cidade de Guaratinguetá

The current socio-economic situation has brought a need to look for alternative ways to get energy that allow reducing the high dependence on fossil fuel sources while deflect from the climate change arising from the result of the use of these energy resources. Renewable sources of energy, low and medium temperature appear as high potential of energy resources, which have a major influence on the way of life of the people to enable decentralized energy production. In Brazil, in particular, have also the need to decentralize the energy grid, currently focused on energy from water source. The current water crisis, exemplifies the urgency of betting on other energy sources, as a way to help in emergency situations such as the current one. Therefore, this study evaluates the possibility of using biomass as a heat source in a Rankine Cycle Organic where instead of water; it uses thermal fluid as working fluid, was compared the urban areas of the city of Guaratinguetá with the urban area of the metropolitan region of São Paulo. Thus, it was established two scenarios, so it was possible to establish the cycle to be used

Análise microestrutural e caracterização mecânica do aço AISI 4350 submetido a diferentes tratamentos térmicos

The multiphase steels are gaining increasing attention in scientific studies because of the different mechanical and microstructural properties that the material can achieve under different thermomechanical and heat treatments that can be submitted. In the present study, it was made a microstructural study thru the triple attack technic associated with optical microscopy and mechanical characterization of medium carbon AISI 4350 steel thru a tensile strength test, subjected to three routes of heat treatment: annealing, quenching and tempering and isothermal annealing. It was verified the predominance of ferrite-perlite constituent in the specimen annealed, martensitic in the quenched and tempered specimen and bainitic in the annealed isothermally specimen. The annealed material showed a higher ductility, while the hardened and tempered specimen showed the highest hardness and ultimately the bainitic specimen showed a combination of the two abovementioned mechanical properties. Thus, we proved that the multiphase steel SAE 4350 can be a versatile material with great potential for various industrial applications

Estudo de sistemas não-lineares em mecânica quântica

The main goal of this work is to investigate the effects of a nonlinear cubic term inserted in the Schrödinger equation for one-dimensional potentials studied in Quantum Mechanics textbooks. Being the main tool the numerical analysis in a large number of works, the analysis of this effect by this term in the potential itself, in order to work with an analytical solution, can be considered something new. For the harmonic oscillator potential, the analysis was made from a numerical method, comparing the result with the known results in the literature. In the case of the infinite well potential and the step potential, hoping to work with an analytical solution, by construction we started with the known wavefunction for the linear case noting the effects in the other physical quantities. The coupling of the physical quantities involved in this work has yielded, besides many complications in the calculations, a series of conditions on the existence and validity of the solutions in regard to the system possible configurations

Implementação de CADD nos cursos de graduação em engenharia mecânica

This study aims to demonstrate the importance of computer-aided design and drafting (CADD) software for mechanical engineers. In addition, evaluate the software: Inventor 2015, Creo 3.0 and Solid Edge ST8, developed by consolidate companies in the market. In order to accomplish those goals, software application and its advantages will be demonstrated for the industry and for the academia. The evaluation process consists in modeling two mechanical assemblies, in order to compare functional aspects among the software. At the end, it is concluded that the learning of CADD software is of great importance also is the basis for using Computer-aided Engineering (CAE) and Computer-Aided Manufacturing (CAM) tools. Furthermore, it is suggested that Inventor and Solid Edge are more likely to be used in the academia

Etiolofia, epidemiologia e prognóstico das pneumonias associadas à ventilação mecânica em um hospital de ensino, com ênfase no estudo molecular e virulência de Staphylococcus aureus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Retorque de parafusos de pilares protéticos com recobrimento de carbono tipo diamante: uma análise da manutenção do torque após fadiga mecânica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da teneurina-2 (Ten-2) nos astrócitos do córtex cerebral de ratos adultos após lesão mecânica. Estudo imuno-histoquímico e de expressão gênica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ciclo de cogeração a partir de resíduos de poda de árvores na cidade de Guaratinguetá

The current socio-economic situation has brought a need to look for alternative ways to get energy that allow reducing the high dependence on fossil fuel sources while deflect from the climate change arising from the result of the use of these energy resources. Renewable sources of energy, low and medium temperature appear as high potential of energy resources, which have a major influence on the way of life of the people to enable decentralized energy production. In Brazil, in particular, have also the need to decentralize the energy grid, currently focused on energy from water source. The current water crisis, exemplifies the urgency of betting on other energy sources, as a way to help in emergency situations such as the current one. Therefore, this study evaluates the possibility of using biomass as a heat source in a Rankine Cycle Organic where instead of water; it uses thermal fluid as working fluid, was compared the urban areas of the city of Guaratinguetá with the urban area of the metropolitan region of São Paulo. Thus, it was established two scenarios, so it was possible to establish the cycle to be used

Análise microestrutural e caracterização mecânica do aço AISI 4350 submetido a diferentes tratamentos térmicos

The multiphase steels are gaining increasing attention in scientific studies because of the different mechanical and microstructural properties that the material can achieve under different thermomechanical and heat treatments that can be submitted. In the present study, it was made a microstructural study thru the triple attack technic associated with optical microscopy and mechanical characterization of medium carbon AISI 4350 steel thru a tensile strength test, subjected to three routes of heat treatment: annealing, quenching and tempering and isothermal annealing. It was verified the predominance of ferrite-perlite constituent in the specimen annealed, martensitic in the quenched and tempered specimen and bainitic in the annealed isothermally specimen. The annealed material showed a higher ductility, while the hardened and tempered specimen showed the highest hardness and ultimately the bainitic specimen showed a combination of the two abovementioned mechanical properties. Thus, we proved that the multiphase steel SAE 4350 can be a versatile material with great potential for various industrial applications

Estudo de sistemas não-lineares em mecânica quântica

The main goal of this work is to investigate the effects of a nonlinear cubic term inserted in the Schrödinger equation for one-dimensional potentials studied in Quantum Mechanics textbooks. Being the main tool the numerical analysis in a large number of works, the analysis of this effect by this term in the potential itself, in order to work with an analytical solution, can be considered something new. For the harmonic oscillator potential, the analysis was made from a numerical method, comparing the result with the known results in the literature. In the case of the infinite well potential and the step potential, hoping to work with an analytical solution, by construction we started with the known wavefunction for the linear case noting the effects in the other physical quantities. The coupling of the physical quantities involved in this work has yielded, besides many complications in the calculations, a series of conditions on the existence and validity of the solutions in regard to the system possible configurations

Implementação de CADD nos cursos de graduação em engenharia mecânica

This study aims to demonstrate the importance of computer-aided design and drafting (CADD) software for mechanical engineers. In addition, evaluate the software: Inventor 2015, Creo 3.0 and Solid Edge ST8, developed by consolidate companies in the market. In order to accomplish those goals, software application and its advantages will be demonstrated for the industry and for the academia. The evaluation process consists in modeling two mechanical assemblies, in order to compare functional aspects among the software. At the end, it is concluded that the learning of CADD software is of great importance also is the basis for using Computer-aided Engineering (CAE) and Computer-Aided Manufacturing (CAM) tools. Furthermore, it is suggested that Inventor and Solid Edge are more likely to be used in the academia

Etiolofia, epidemiologia e prognóstico das pneumonias associadas à ventilação mecânica em um hospital de ensino, com ênfase no estudo molecular e virulência de Staphylococcus aureus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Retorque de parafusos de pilares protéticos com recobrimento de carbono tipo diamante: uma análise da manutenção do torque após fadiga mecânica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Qualidade de sementes de soja colhidas de forma manual e mecânica com diferentes teores de água

A colheita é uma das principais etapas no processo de produção de sementes de soja. O momento adequado para se efetuar a colheita pode variar em função do tipo de colheita e do grau de umidade das sementes. Neste sentido, o objetivo dessa pesquisa foi determinar as alterações fisiológicas de sementes de soja colhidas de forma manual e mecânica com diferentes teores de água. Para tanto, utilizaram-se sementes das cultivares Embrapa 48 e FTS Águia, que têm diferenças no teor de lignina do tegumento, colhidas de forma manual e mecanicamente com 18,0; 15,0 e 12,0% de água. Após a colheita, as sementes foram submetidas à secagem, e a qualidade das sementes foi avaliada pelos testes de germinação, emergência de plântulas, tetrazólio (viabilidade e vigor), envelhecimento acelerado e índice de velocidade de emergência de plântula. Em seguida, as sementes foram armazenadas (20 °C e 45% UR do ar) e analisadas logo após a colheita e aos seis meses de armazenamento. Os resultados obtidos indicam que o parâmetro fisiológico das sementes de soja, não é afetado, quando: se realiza colheita manual com grau de umidade das sementes de 11,4% a 18,4%; e para sementes colhidas à máquina, com grau de umidade entre 12,0% a 15,9%; mantendo a qualidade fisiológica mesmo após seis meses de armazenamento.

Qualidade física de um latossolo vermelho sob plantio direto submetido à descompactação mecânica e biológica

A escarificação e o uso de plantas de cobertura de inverno têm sido adotados para promover a melhoria dos atributos físicos do solo relacionados à aeração. O objetivo deste trabalho foi verificar o efeito das plantas de cobertura de inverno e escarificação nas propriedades físicas de um Latossolo Vermelho distrófico, textura argilosa, após 16 anos em sistema plantio direto. Os tratamentos foram realizados em maio de 2009 e consistiram de: plantio direto (PD), plantio direto com escarificação mecânica a 0,25 m (PD-E) e plantio direto com descompactação biológica por meio da cultura do nabo forrageiro (PD-B). O delineamento experimental foi em blocos ao acaso com quatro repetições, totalizando 12 unidades experimentais. Dezoito meses após a aplicação dos tratamentos, foram coletadas amostras indeformadas de solo em cada unidade experimental, em cinco camadas: 0,0-0,1; 0,1-0,2; 0,2-0,3; 0,3-0,4; e 0,4-0,5 m. Foram avaliados os atributos físicos do solo: porosidade, densidade do solo (Ds), permeabilidade ao ar (Ka) e índices de continuidade de poros. A Ka foi medida por meio de um permeâmetro de carga constante de ar em nove potenciais mátricos (ψm): -0,5; -1; -2; -3; -5; -7; -10; -50; e -100 kPa. Os resultados indicam que os atributos físicos do solo avaliados não foram alterados pelo uso de plantas de cobertura e escarificação. Por outro lado, houve diferenças entre camadas de solo, principalmente entre 0,0-0,1 e 0,1-0,2 m. Na camada de 0,1-0,2 m, a Ds foi maior e a porosidade total e Ka (ψm = -5 kPa) foram menores do que na camada de 0,0-0,1 m. No PD-E, verificou-se que a macroporosidade foi maior na camada de 0,0-0,1 m em comparação com os outros tratamentos. Os resultados sugerem que o solo estudado submetido aos tratamentos de descompactação, após 18 meses, retornou a valores semelhantes aos da testemunha.