Multi-surface sliding control of MIMO autonomous flight systems

In this paper, we present a hardware in the loop simulation of our proposed multi-surface sliding control (MSSC) for trajectory tracking of 6 degrees of freedom (6-DOF) inertia coupled aerial vehicles with multiple inputs and multiple outputs (MIMO). Using MSSC on MIMO autonomous flight systems creates confluent control that can account for both matched and mismatched uncertainties, system disturbances and excitation in internal dynamics. The control law is implemented on an onboard computer and is validated though Hardware-In-the-Loop (HIL) simulations, between the hardware and the flight simulator X-Plane, which simulates the unmanned aircraft dynamics, sensors, and actuators. Simulation results are presented to validate the analysis.

Full converter based wind turbine generator system generic modelling: Variations and applicability

Wind energy system integration can lead to adverse effects on modern electric grid so it is imperative toassess their dynamic performance before actual plant startup. Transmission system operators all over theworld stress the need for a proper wind turbine generator model for dynamic performance as well asancillary service assessments. Due to the bulk power system assessment requirements, developmentof suitable generic modeling has gained high priority. Generic modeling of type 4 full converter wind turbinegenerator system for application in frequency ancillary service investigations under varying windspeed and varying reference power has been presented in this study. Prevalent generic model, manufacturerspecific proprietary generic model along with detailed wind turbine model with synchronous generatoris also provided to highlight various modelling framework difference. Descriptions of individualsub models of proposed generic model are presented in detail and performance results are comparedand validated with GE’s proprietary generic model and detailed WTG model by means of simulationsin the MATLAB Power System Block set.

An improved static model for tool deflection in machining of Ti–6Al–4V acetabular shell produced by selective laser melting

Tool deflection during milling operation leads to dimensional error, decreasing surface quality and increasing rejection rate. In this study, tool deflection during the milling of the inner surfaces of Ti–6Al–4V prosthetic acetabular shell produced by selective laser melting (SLM) was modelled. The first purpose of this research is to provide a general static cutting tool deflection model for ball nose cutters where deviation of machine components and tool holder are so small as to be considered negligible. This is because the values of machine component and tool holder deflection were lower than standard tolerances (10 μm) and found to be lower than 1/15 of tool deflection. The second and third objectives of this work involve calculating contact surfaces by determining workpiece and tool geometry and choosing second moment of inertia using a novel cross section method (CSM). Static models for three quasi-analytical methods (QAM) that are simple cantilever beam model (SCBM), two-section model (TWSM) and our three section model (THSM) are presented. THSM showed high accuracy which was validated by 3D finite element method (FEM3D) and experimental measurements. The accuracy of tool deflection calculation using THSM by computing, shank, flute and ball head deflection and also utilizing CSM to determine second moment of inertia showed notable improvements.

Mathematical models for cellular aggregation: the chemotactic instability and clustering formation

In this thesis we present a mathematical formulation of the interaction between microorganisms such as bacteria or amoebae and chemicals, often produced by the organisms themselves. This interaction is called chemotaxis and leads to cellular aggregation. We derive some models to describe chemotaxis. The first is the pioneristic Keller-Segel parabolic-parabolic model and it is derived by two different frameworks: a macroscopic perspective and a microscopic perspective, in which we start with a stochastic differential equation and we perform a mean-field approximation. This parabolic model may be generalized by the introduction of a degenerate diffusion parameter, which depends on the density itself via a power law. Then we derive a model for chemotaxis based on Cattaneo's law of heat propagation with finite speed, which is a hyperbolic model. The last model proposed here is a hydrodynamic model, which takes into account the inertia of the system by a friction force. In the limit of strong friction, the model reduces to the parabolic model, whereas in the limit of weak friction, we recover a hyperbolic model. Finally, we analyze the instability condition, which is the condition that leads to aggregation, and we describe the different kinds of aggregates we may obtain: the parabolic models lead to clusters or peaks whereas the hyperbolic models lead to the formation of network patterns or filaments. Moreover, we discuss the analogy between bacterial colonies and self gravitating systems by comparing the chemotactic collapse and the gravitational collapse (Jeans instability).

Ab Initio Quantum Chemical Studies on Neutral-Radical Reactions of Ethynyl (C2H) and Cyano (CN) with Unsaturated Hydrocarbons

An Ab Initio/RRKM study of the reaction mechanism and product branching ratios of neutral-radical ethynyl (C2H) and cyano (CN) radical species with unsaturated hydrocarbons is performed. The reactions studied apply to cold conditions such as planetary atmospheres including Titan, the Interstellar Medium (ISM), icy bodies and molecular clouds. The reactions of C2H and CN additions to gaseous unsaturated hydrocarbons are an active area of study. NASA’s Cassini/Huygens mission found a high concentration of C2H and CN from photolysis of ethyne (C2H2) and hydrogen cyanide (HCN), respectively, in the organic haze layers of the atmosphere of Titan. The reactions involved in the atmospheric chemistry of Titan lead to a vast array of larger, more complex intermediates and products and may also serve as a chemical model of Earth’s primordial atmospheric conditions. The C2H and CN additions are rapid and exothermic, and often occur barrierlessly to various carbon sites of unsaturated hydrocarbons. The reaction mechanism is proposed on the basis of the resulting potential energy surface (PES) that includes all the possible intermediates and transition states that can occur, and all the products that lie on the surface. The B3LYP/6-311g(d,p) level of theory is employed to determine optimized electronic structures, moments of inertia, vibrational frequencies, and zero-point energy. They are followed by single point higher-level CCSD(T)/cc-vtz calculations, including extrapolations to complete basis sets (CBS) of the reactants and products. A microcanonical RRKM study predicts single-collision (zero-pressure limit) rate constants of all reaction paths on the potential energy surface, which is then used to compute the branching ratios of the products that result. These theoretical calculations are conducted either jointly or in parallel to experimental work to elucidate the chemical composition of Titan’s atmosphere, the ISM, and cold celestial bodies.

Modelling and control of a floating oscillating water column

A novel numerical model of a Bent Backwards Duct Buoy (BBDB) Oscillating Water Column (OWC) Wave Energy Converter was created based on existing isolated numerical models of the different energy conversion systems utilised by an OWC. The novel aspect of this numerical model is that it incorporates the interdependencies of the different power conversion systems rather than modelling each system individually. This was achieved by accounting for the dynamic aerodynamic damping caused by the changing turbine rotational velocity by recalculating the turbine damping for each simulation sample and applying it via a feedback loop. The accuracy of the model was validated using experimental data collected during the Components for Ocean Renewable Energy Systems (CORES) EU FP-7 project that was tested in Galway Bay, Ireland. During the verification process, it was discovered that the model could also be applied as a valuable tool when troubleshooting device performance. A new turbine was developed and added to a full scale model after being investigated using Computational Fluid Dynamics. The energy storage capacity of the impulse turbine was investigated by modelling the turbine with both high and low inertia and applying three turbine control theories to the turbine using the full scale model. A single Maximum Power Point Tracking algorithm was applied to the low-inertia turbine, while both a fixed and dynamic control algorithm was applied to the high-inertia turbine. These results suggest that the highinertia turbine could be used as a flywheel energy storage device that could help minimize output power variation despite the low operating speed of the impulse turbine. This research identified the importance of applying dynamic turbine damping to a BBDB OWC numerical model, revealed additional value of the model as a device troubleshooting tool, and found that an impulse turbine could be applied as an energy storage system.

Tracing outsideness: young women's institutional journeys and the geographies of closed space

Understanding confinement and its complex workings between individuals and society has been the stated aim of carceral geography and wider studies on detention. This project contributes ethnographic insights from multiple sites of incarceration, working with an under-researched group within confined populations. Focussing on young female detainees in Scotland, this project seeks to understand their experiences of different types of ‘closed’ space. Secure care, prison and closed psychiatric facilities all impact on the complex geographies of these young women’s lives. The fluid but always situated relations of control and care provide the backdrop for their journeys in/out and beyond institutional spaces. Understanding institutional journeys with reference to age and gender allows an insight into the highly mobile, often precarious, and unfamiliar lives of these young women who live on the margins. This thesis employs a mixed-method qualitative approach and explores what Goffman calls the ‘tissue and fabric’ of detention as a complex multi-institutional practice. In order to be able to understand the young women’s gendered, emotional and often repetitive experiences of confinement, analysis of the constitution of ‘closed space’ represents a first step for inquiry. The underlying nature of inner regimes, rules and discipline in closed spaces, provide the background on which confinement is lived, perceived and processed. The second part of the analysis is the exploration of individual experiences ‘on the inside’, ranging from young women’s views on entering a closed institution, the ways in which they adapt or resist the regime, and how they cope with embodied aspects of detention. The third and final step considers the wider context of incarceration by recovering the young women’s journeys through different types of institutional spaces and beyond. The exploration of these journeys challenges and re-develops understandings of mobility and inertia by engaging the relative power of carceral archipelagos and the figure of femina sacra. This project sits comfortably within the field of carceral geography while also pushing at its boundaries. On a conceptual level, a re-engagement with Goffman’s micro-analysis challenges current carceral-geographic theory development. Perhaps more importantly, this project pushes for an engagement with different institutions under the umbrella of carceral geography, thus creating new dialogues on issues like ‘care’ and ‘control’. Finally, an engagement with young women addresses an under-represented population within carceral geography in ways that raise distinctly problematic concerns for academic research and penal policy. Overall, this project aims to show the value of fine grained micro-level research in institutional geographies for extending thinking and understanding about society’s responses to a group of people who live on the margins of social and legal norms.

SCADA configuration and control modes implementation on an experimental water supply canal

In the last years, digital controllers became a very interesting alternative (low costs and higher accuracy) to the analogue or to hydrodynamic traditional controllers in water supply canal automation, in order to match water supply to water demands. This kind of hydraulic systems needs particular research for control applications because they are big scale systems, open and characterized by big delays and great inertia. This paper presents several digital control modes tested in an experimental canal that will be used as a research platform on the automatic canal control domain. The canal operation and their control modes selection are supervised by a SCADA system developed and configured for this particular canal.

María Isabel, el feminicidio con rostro adolescente en Guatemala

 Resumen El autor ilustra este ensayo con el caso Véliz Franco (Guatemala, diciembre de 2001), el cual descarna la brutalidad de la agresión, la escasa información académica y forense sobre el feminicidio adolescente y la inercia estatal por hallar a los responsables de esta manifestación de homicidio. De igual manera, resalta el papel de las organizaciones no gubernamentales ante la Comisión Interamericana de Derechos Humanos (CIDH), en especial la necesidad de contrarrestar la impunidad generalizada en el caso de los y las adolescentes. En la audiencia 12.578, la abogada y experta guatemalteca Claudia Paz saca a relucir las debilidades de la investigación e identifica las fallas elementales del Estado guatemalteco al delimitar la escena del crimen y las piezas de la evidencia. Palabras clave: adolescente, femicidio, feminicidio, impunidad, Guatemala. Abstract The author illustrates this essay with the Véliz Franco’s case (Guatemala, December 2001), which narrates the brutality of the aggression, the lack of information on the feminicide towards teenagers and the state inertia to seek the perpetrators of such crimes. The article also highlights the role of Non-Governmental Organizations (NGO’s) before the Inter-American Commission of Human Rights, especially on the need to combat the generalized impunity in cases of murders of teenagers. In the audience 12.578 the Guatemalan lawyer and expert, Claudia Paz, brings up the weaknesses of the investigation and identifies the core failures of the state to specify the crime scene and the pieces of evidence.  Keywords: adolescent, femicide, feminicide, impunity, Guatemala.