Rôle de protéines épididymaires humaines et murines dans les fonctions spermatiques

L’infertilité affecte jusqu’à 15-20% des couples en âge de se reproduire. C’est pourquoi, mieux comprendre les mécanismes à la base de la fécondation est essentiel pour l’identification de nouvelles causes d’infertilité et l’optimisation des techniques de reproduction assistée. La capacitation est une étape de la maturation des spermatozoïdes qui se déroule dans le tractus génital femelle. Elle est requise pour la fécondation d’un ovocyte. Notre laboratoire a démontré que des protéines du plasma séminal bovin, appelées protéines Binder of SPerm (BSP), se lient aux phospholipides portant des groupements choline à la surface de la membrane des spermatozoïdes lors de l’éjaculation et promeuvent la capacitation. Ces protéines exprimées par les vésicules séminales sont ubiquitaires chez les mammifères et ont été étudiées chez plusieurs espèces dont l’étalon, le porc, le bouc et le bélier. Récemment, l’expression de gènes homologues aux BSP a été découverte dans les épididymes d’humains (BSPH1) et de souris (Bsph1 et Bsph2). Notre hypothèse est que les BSP chez ces deux espèces sont ajoutées aux spermatozoïdes lors de la maturation épididymaire et ont des rôles dans les fonctions spermatiques, similaires à ceux des protéines BSP bovines. Les protéines BSP humaines et murines représentent une faible fraction des protéines totales du plasma séminal. Pour cette raison, afin d’étudier leurs caractéristiques biochimiques et fonctionnelles, des protéines recombinantes ont été produites. Les protéines recombinantes ont été exprimées dans des cellules Escherichia coli origami B(DE3)pLysS en utilisant un vecteur d’expression pET32a. Suivant la lyse cellulaire, les protéines ont été dénaturées avec de l’urée et purifiées par chromatographie d’affinité sur ions métalliques immobilisés. Une fois liées à la colonne, les protéines ont été repliées à l’aide d’un gradient d’urée décroissant avant d’être éluées. Cette méthode a mené à la production de trois protéines recombinantes (rec-BSPH1 humaine, rec-BSPH1 murine et rec-BSPH2 murine) pures et fonctionnelles. Des expériences de chromatographie d’affinité et de co-sédimentation nous ont permis de démontrer que les trois protéines peuvent se lier à des ligands connus des protéines BSP comme la gélatine et l’héparine en plus de pouvoir se lier aux spermatozoïdes. Nos études ont également révélées que les deux protéines rec-BSPH1 peuvent se lier aux liposomes de phosphatidylcholine (PC) et sont capable de promouvoir la capacitation des spermatozoïdes. À l’opposé, rec-BSPH2 ne peut ni se lier aux liposomes de PC, ni stimuler la capacitation. Finalement, les protéines recombinantes n’ont aucun effet sur la réaction acrosomique ou sur la motilité des spermatozoïdes. Chez les bovins, les protéines BSP induisent la capacitation grâce des interactions avec les lipoprotéines de haute densité (HDL) et les glycosaminoglycanes. Puisque le HDL est également un joueur important de la capacitation chez la souris, le rôle de la protéine native BSPH1 murine au niveau de la capacitation induite par le HDL a été étudié. Les résultats obtenus suggèrent que, in vivo, la protéine BSPH1 de souris serait impliquée dans la capacitation via une interaction directe avec le HDL. Comme les protéines BSPH1 humaines et murines sont orthologues, ces résultats pourraient aussi s’appliquer à la fertilité humaine. Les résultats présentés dans cette thèse pourraient mener à une meilleure compréhension de la fertilité masculine et aider à améliorer les techniques de reproduction assistée. Ils pourraient également mener au développement de nouveaux tests diagnostiques ou de contraceptifs masculins.

Développement d'une sonde fluorescente bioactivable pour l'étude du rôle in vitro et in vivo des protéases dégradant l’apolipoprotéine A-I.

Les effets bénéfiques des lipoprotéines de haute densité (HDL) contre l'athérosclérose ont été attribués, en grande partie, à leur composante protéique majeure, l'apolipoprotéine A-I (apoA-I). Cependant, il y a des indications que l'apoA-I peut être dégradée par des protéases localisées dans les plaques athérosclérotiques humaines, ce qui pourrait réduire l'efficacité des thérapies basées sur les HDL sous certaines conditions. Nous décrivons ici le développement et l'utilisation d'une nouvelle sonde bioactivatable fluorescente dans le proche infrarouge, apoA-I-Cy5.5, pour l'évaluation des activités protéolytiques spécifiques qui dégradent l'apoA-I in vitro, in vivo et ex vivo. La fluorescence basale de la sonde est inhibée par la saturation du fluorophore Cy5.5 sur la protéine apoA-I, et la fluorescence émise par le Cy5.5 (proche infrarouge) est révélée après clivage de la sonde. La protéolyse in vitro de l'apoA-I par des protéases a montré une augmentation de la fluorescence allant jusqu'à 11 fois (n=5, P ≤ 0.05). En utilisant notre nouvelle sonde apoA-I-Cy5.5 nous avons pu quantifier les activités protéolytiques d'une grande variété de protéases, incluant des sérines (chymase), des cystéines (cathepsine S), et des métalloprotéases (MMP-12). En outre, nous avons pu détecter l'activation de la sonde apoA-I-Cy5.5 sur des sections d'aorte de souris athérosclérotiques par zymographie in situ et avons observé qu'en présence d'inhibiteurs de protéases à large spectre, la sonde pourrait être protégée des activités protéolytiques des protéases (-54%, n=6, P ≤ 0,001). L'infusion in vivo de la sonde apoA-I-Cy5.5 dans les souris athérosclérotiques (Ldlr -/--Tg (apoB humaine)) a résulté en utilisant un système d'imagerie moléculaire combinant la fluorescence moléculaire tomographique et la résonance magnétique,en un signal de fluorescence dans l'aorte plus important que celui dans les aortes des souris de type sauvage C57Bl/6J (CTL). Les mesures in vivo ont été confirmées par l'imagerie ex vivo de l'aorte qui a indiqué une augmentation de 5 fois du signal fluorescent dans l'aorte des souris ATX (n=5) par rapport à l'aorte des souris (n=3) CTL (P ≤ 0,05). L'utilisation de cette sonde pourrait conduire à une meilleure compréhension des mécanismes moléculaires qui sous-tendent le développement et la progression de l'athérosclérose et l'amélioration des stratégies thérapeutiques à base de HDL.

Neurotensinergic modulation of glutamatergic neurotransmission in VTA neurons.

L’aire tegmentaire ventrale (VTA) contient une forte densité de terminaisons neurotensinergiques ainsi que des récepteurs à la surface des neurones dopaminergiques et non-dopaminergiques. Le VTA a été impliqué dans des maladies comme la schizophrénie, les psychoses et l’abus de substance. Les drogues d’abus sont connues pour induire le phénomène de sensibilisation - un processus de facilitation par lequel l’exposition à un stimulus produit une réponse augmentée lors de l’exposition subséquente au même stimulus. La sensibilisation se développe dans le VTA et implique mécanismes dopaminergiques et glutamatergiques. Il a été montré que les antagonistes neurotensinergiques bloquaient le développement de la sensibilisation et certains mécanismes de récompense et ces effets pourraient être médiés indirectement par une modulation de la neurotransmission glutamatergique. Cependant, on connaît peu les mécanismes de modulation de la transmission glutamatergique par la neurotensine (NT) dans le VTA. Le but de la présente thèse était d’étudier la modulation neurotensinergique de la neurotransmission glutamatergique dans les neurones dopaminergiques et non-dopaminergiques du VTA. Pour ce faire, nous avons utilisé la technique du patch clamp dans la cellule entière dans des tranches horizontales du VTA pour étudier les effets de différents agonistes et antagonistes neurotensinergiques. Les neurones ont été identifié comme Ih+ (présumés dopaminergiques) ou Ih- (présumés non-dopaminergiques) selon qu’ils exprimaient ou non un courant cationique activé par l’hyperpolarisation (Ih). Des techniques d’immunocytochimie ont été utilisées pour marquer les neurones et vérifier leur localisation dans le VTA. Dans une première étude nous avons trouvé que la neurotensine indigène (NT1-13) ou son fragment C-terminal, NT8-13, induisait une augmentation comparable des courants postsynaptiques excitateurs glutamatergiques (CPSEs) dans les neurones Ih+ ou Ih- du VTA. L'augmentation induite dans les neurones Ih+ par la NT8-13 a été bloquée par le SR48692, un antagoniste des récepteurs NTS1, et par le SR142948A, un antagoniste des récepteurs NTS1 et NTS2, suggérant que l'augmentation était médiée par l’activation des récepteurs NTS1. Dans les neurones Ih- l'augmentation n’a été bloquée que par le SR142948A indiquant une implication des récepteurs NTS2. Dans une deuxième étude, nous avons testé les effets de la D-Tyr[11]NT (un analogue neurotensinergique ayant différentes affinités de liaison pour les sous-types de récepteurs neurotensinergiques) sur les CPSEs glutamatergiques dans les neurones Ih+ et Ih- en parallèle avec une série d’expériences comportementales utilisant un paradigme de préférence de place conditionnée (PPC) menée dans le laboratoire de Pierre-Paul Rompré. Nous avons constaté que la D-Tyr[11]NT induisaient une inhibition dépendante de la dose dans les neurones Ih+ médiée par l'activation de récepteurs NTS2. En revanche, la D-Tyr[11]NT a produit une augmentation des CPSEs glutamatergiques médiée par des récepteurs NTS1 dans les neurones Ih-. Les résultats des expériences comportementales ont montré que des microinjections bilatérales de D-Tyr[11]NT dans le VTA induisait une PPC bloquée uniquement par la co-injection de SR142948A et SR48692, indiquant un rôle pour les deux types de récepteurs, NTS1 et NTS2. Cette étude nous a permis de conclure que i) la D-Tyr[11]NT agit dans le VTA via des récepteurs NTS1 et NTS2 pour induire un effet de récompense et ii) que cet effet est dû, au moins en partie, à une augmentation de la neurotransmission glutamatergique dans les neurones non-dopaminergiques (Ih-). Dans une troisième étude nous nous sommes intéressés aux effets de la D-Tyr[11]NT sur les réponses isolées médiées par les récepteurs N-méthyl-D-aspartate (NMDA) et acide α-amino-3- hydroxy-5-méthyl-4-isoxazolepropionique (AMPA) dans les neurones du VTA. Nous avons constaté que dans les neurones Ih+ l’amplitude des CPSEs NMDA et AMPA étaient atténuées de la même manière par la D-Tyr[11] NT. Cette modulation des réponses était médiée par les récepteurs NTS1 et NTS2. Au contraire, dans les neurones Ih-, l’amplitude des réponses NMDA et AMPA étaient augmentées en présence de D-Tyr[11]NT et ces effets dépendaient de l’activation des récepteurs NTS1 localisés sur les terminaisons glutamatergiques. Ces résultats fournissent une preuve supplémentaire que le NT exerce une modulation bidirectionnelle sur la neurotransmission glutamatergique dans les neurones du VTA et met en évidence un nouveau type de modulation peptidergique des neurones non-dopaminergiques qui pourrait être impliqué dans la sensibilisation. En conclusion, la modulation neurotensinergique de la neurotransmission glutamatergique dans les neurones dopaminergiques et non-dopaminergiques du VTA se fait en sens opposé soit, respectivement, par une inhibition ou par une excitation. De plus, ces effets sont médiés par différents types de récepteurs neurotensinergiques. En outre, nos études mettent en évidence une modulation peptidergique de la neurotransmission glutamatergique dans le VTA qui pourrait jouer un rôle important dans les mécanismes de lutte contre la toxicomanie.

Plasma Polymerised Organic Thin Films-A Study on the Structural, Electrical and Nonlinear Optical Properties for Possible Applications

This proposed thesis is entitled “Plasma Polymerised Organic Thin Films: A study on the Structural, Electrical, and Nonlinear Optical Properties for Possible Applications. Polymers and polymer based materials find enormous applications in the realm of electronics and optoelectronics. They are employed as both active and passive components in making various devices. Enormous research activities are going on in this area for the last three decades or so, and many useful contributions are made quite accidentally. Conducting polymers is such a discovery, and eversince the discovery of conducting polyacetylene, a new branch of science itself has emerged in the form of synthetic metals. Conducting polymers are useful materials for many applications like polymer displays, high density data storage, polymer FETs, polymer LEDs, photo voltaic devices and electrochemical cells. With the emergence of molecular electronics and its potential in finding useful applications, organic thin films are receiving an unusual attention by scientists and engineers alike. This is evident from the vast literature pertaining to this field appearing in various journals. Recently, computer aided design of organic molecules have added further impetus to the ongoing research activities in this area. Polymers, especially, conducting polymers can be prepared both in the bulk and in the thinfilm form. However, many applications necessitate that they are grown in the thin film form either as free standing or on appropriate substrates. As far as their bulk counterparts are concerned, they can be prepared by various polymerisation techniques such as chemical routes and electrochemical means. A survey of the literature reveals that polymers like polyaniline, polypyrrole, polythiophene, have been investigated with a view to studying their structural electrical and optical properties. Among the various alternate techniques employed for the preparation of polymer thin films, the method of plasma polymerisation needs special attention in this context. The technique of plasma polymerisation is an inexpensive method and often requires very less infra structure. This method includes the employment of ac, rf, dc, microwave and pulsed sources. They produce pinhole free homogeneous films on appropriate substrates under controlled conditions. In conventional plasma polymerisation set up, the monomer is fed into an evacuated chamber and an ac/rf/dc/ w/pulsed discharge is created which enables the monomer species to dissociate, leading to the formation of polymer thin films. However, it has been found that the structure and hence the properties exhibited by plasma polymerized thin films are quite different from that of their counterparts produced by other thin film preparation techniques such as electrochemical deposition or spin coating. The properties of these thin films can be tuned only if the interrelationship between the structure and other properties are understood from a fundamental point of view. So very often, a through evaluation of the various properties is a pre-requisite for tailoring the properties of the thin films for applications. It has been found that conjugation is a necessary condition for enhancing the conductivity of polymer thin films. RF technique of plasma polymerisation is an excellent tool to induce conjugation and this modifies the electrical properties too. Both oxidative and reductive doping can be employed to modify the electrical properties of the polymer thin films for various applications. This is where organic thin films based on polymers scored over inorganic thin films, where in large area devices can be fabricated with organic semiconductors which is difficult to achieve by inorganic materials. For such applications, a variety of polymers have been synthesized such as polyaniline, polythiophene, polypyrrole etc. There are newer polymers added to this family every now and then. There are many virgin areas where plasma polymers are yet to make a foray namely low-k dielectrics or as potential nonlinear optical materials such as optical limiters. There are also many materials which are not been prepared by the method of plasma polymerisation. Some of the materials which are not been dealt with are phenyl hydrazine and tea tree oil. The advantage of employing organic extracts like tea tree oil monomers as precursors for making plasma polymers is that there can be value addition to the already existing uses and possibility exists in converting them to electronic grade materials, especially semiconductors and optically active materials for photonic applications. One of the major motivations of this study is to synthesize plasma polymer thin films based on aniline, phenyl hydrazine, pyrrole, tea tree oil and eucalyptus oil by employing both rf and ac plasma polymerisation techniques. This will be carried out with the objective of growing thin films on various substrates such as glass, quartz and indium tin oxide (ITO) coated glass. There are various properties namely structural, electrical, dielectric permittivity, nonlinear optical properties which are to be evaluated to establish the relationship with the structure and the other properties. Special emphasis will be laid in evaluating the optical parameters like refractive index (n), extinction coefficient (k), the real and imaginary components of dielectric constant and the optical transition energies of the polymer thin films from the spectroscopic ellipsometric studies. Apart from evaluating these physical constants, it is also possible to predict whether a material exhibit nonlinear optical properties by ellipsometric investigations. So further studies using open aperture z-scan technique in order to evaluate the nonlinear optical properties of a few selected samples which are potential nonlinear optical materials is another objective of the present study. It will be another endeavour to offer an appropriate explanation for the nonlinear optical properties displayed by these films. Doping of plasma polymers is found to modify both the electrical conductivity and optical properties. Iodine is found to modify the properties of the polymer thin films. However insitu iodine doping is tricky and the film often looses its stability because of the escape of iodine. An appropriate insitu technique of doping will be developed to dope iodine in to the plasma polymerized thin films. Doping of polymer thin films with iodine results in improved and modified optical and electrical properties. However it requires tools like FTIR and UV-Vis-NIR spectroscopy to elucidate the structural and optical modifications imparted to the polymer films. This will be attempted here to establish the role of iodine in the modification of the properties exhibited by the films

Optical and electrical properties of amorphous zinc tin oxide thin films examined for thin film transistor application

Structural, electronic, and optical properties of amorphous and transparent zinc tin oxide films deposited on glass substrates by pulsed laser deposition (PLD) were examined for two chemical compositions of Zn:Sn=1:1 and 2:1 as a function of oxygen partial pressure PO2 used for the film deposition and annealing temperature. Different from a previous report on sputter-deposited films Chiang et al., Appl. Phys. Lett. 86, 013503 2005 , the PLD-deposited films crystallized at a lower temperature 450 °C to give crystalline ZnO and SnO2 phases. The optical band gaps Tauc gaps were 2.80−2.85 eV and almost independent of oxygen PO2 , which are smaller than those of the corresponding crystals 3.35−3.89 eV . Films deposited at low PO2 showed significant subgap absorptions, which were reduced by postthermal annealing. Hall mobility showed steep increases when carrier concentration exceeded threshold values and the threshold value depended on the film chemical composition. The films deposited at low PO2 2 Pa had low carrier concentrations. It is thought that the low PO2 produced high-density oxygen deficiencies and generated electrons, but these electrons were trapped in localized states, which would be observed as the subgap absorptions. Similar effects were observed for 600 °C crystallized films and their resistivities were increased by formation of subgap states due to the reducing high-temperature condition. High carrier concentrations and large mobilities were obtained in an intermediate PO2 region for the as-deposited films.

Recyclable Short Fibre Reinforced Plastics PP/Nylon and HDPE/Nylon composites

The study shows that standard plastics like polypropylene and high density polyethylene can be reinforced by adding nylon short fibres. Compared to the conventional glass reinforced thermoplastics this novel class of reinforced thermoplastics has the major advantage of recyclability. Hence such composites represent a new spectrum of recyclable polymer composites. The fibre length and fibre diameter used for reinforcement are critical parameters While there is a critical fibre length below which no effective reinforcement takes place, the reinforcement improves when the fibre diameter decreases due to increased surface area.While the fibres alone give moderate reinforcement, chemical modification of the matrix can further improve the strength and modulus of the composites. Maleic anhydride grafting in presence of styrene was found to be the most efficient chemical modification. While the fibre addition enhances the viscosity of the melt at lower shear rates, the enhancement at higher shear rate is only marginal. This shows that processing of the composite can be done in a similar way to that of the matrix polymer in high shear operations such as injection moulding. Another significant observation is the decrease in melt viscosity of the composite upon grafting. Thus chemical modification of matrix makes processing of the composite easier in addition to improving the mechanical load bearing capacity.For the development of a useful short fibre composite, selection of proper materials, optimum design with regard to the particular product and choosing proper processing parameters are most essential. Since there is a co-influence of many parameters, analytical solutions are difficult. Hence for selecting proper processing parameters 'rnold flow' software was utilized. The orientation of the fibres, mechanical properties, temperature profile, shrinkage, fill time etc. were determined using the software.Another interesting feature of the nylon fibre/PP and nylon fibre/HDPE composites is their thermal behaviour. Both nylon and PP degrade at the same temperature in single steps and hence the thermal degradation behaviour of the composites is also being predictable. It is observed that the thermal behaviour of the matrix or reinforcement does not affect each other. Almost similar behaviour is observed in the case of nylon fibre/HDPE composites. Another equally significant factor is the nucleating effect of nylon fibre when the composite melt cools down. In the presence of the fibre the onset of crystallization occurs at slightly higher temperature.When the matrix is modified by grafting, the onset of crystallization occurs at still higher temperature. Hence it may be calculated that one reason for the improvement in mechanical behaviour of the composite is the difference in crystallization behaviour of the matrix in presence of the fibre.As mentioned earlier, a major advantage of these composites is their recyclability. Two basic approaches may be employed for recycling namely, low temperature recycling and high temperature recycling. In the low temperature recycling, the recycling is done at a temperature above the melting point of the matrix, but below that of the fibres while in the high temperature route. the recycling is done at a temperature above the melting points of both matrix and fibre. The former is particularly interesting in that the recycled material has equal or even better mechanical properties compared to the initial product. This is possible because the orientation of the fibre can improve with successive recycling. Hence such recycled composites can be used for the same applications for which the original composite was developed. In high temperature recycling, the composite is converted into a blend and hence the properties will be inferior to that of the original composite, but will be higher than that of the matrix material alone.

Modification of Short Fibre Reinforced pp and HDPE Using Nanosilica

The present study was undertaken to prepare nanosilica by a simple cost effective means and to use it as a potential nanomodifier in thermoplastic matrices and to develop useful composites. Nanosilica was prepared from sodium silicate and dilute hydrochloric acid by polymer induced crystallization technique under controlled conditions. The silica surface was modified by silane coupling agent to decrease the agglomeration and thus to increase the reinforcement with polymer. The pristine nanosilica and modified nanosilica were used to make nano-micro hybrid composites. Short glass fibres and nylon fibres were used as microfillers. The hybrid nanocomposites based on Polypropylene (PP) and High density poly ethylene (HOPE) are prepared. The mechanical, thermal, crystallization and dynamic mechanical properties of the composites are evaluated.

NANO - ZINC OXIDE: A Novel Modifier for Thermoplastics

Various synthesis routes have been developed in recent years for the preparation of nanoparticles. One of those methods is polymer induced crystallization. The first objective of the present work was to prepare nano ZnO powder by polymer induced crystallization in chitosan solution and to characterize the material using different techniques like TEM, SEM, XRD, FTLR, UV spectroscopy, TGA, DSC etc.The second object of the study is to prepare composites using nano ZnO. It has been undertaken to explore the potential of nano ZnO as reinforcement in engineering as well as commodity thermoplastics to widen their application spectra. We selected three engineering thermoplastics like [poly ethylene terephthalate, polyamide 6, and polycarbonate] and three commodity plastics like [polypropylene, high density polyethylene, and polystyrene] for the study. To date one of the few disadvantages associated with nanoparticle incorporation has concerned toughness and impact performance. Modification of polymers could reduce impact performance. The present study also focused on whether nano ZnO can act as a modifier for thennoplastics, without sacrificing their impact strength.

Influence of Angle of Air Injection and Particles in Bed Hydrodynamics of Swirling Fluidized Bed

The thesis presented here unveils an experimental study of the hydrodynamic characteristics of swirling fluidized bed viz. pressure drop across the distributor and the bed, minimum fluidizing velocity, bed behaviour and angle of air injection. In swirling fluidized bed the air is admitted to the bed at an angle 'Ѳ' to the horizontal. The vertical component of the velocity v sin Ѳ causes fluidization and the horizontal component v cos Ѳ contributes to swirl motion of the bed material.The study was conducted using spherical particles having sizes 3.2 mm, 5.5 mm & 7.4 mm as the bed materials. Each of these particles was made from high density polyethylene, nylon and acetal having relative densities of 0.93, 1.05 and 1.47 respectively.The experiments were conducted using conidour type distributors having four rows of slits. Altogether four distributors having angles of air injection (Φ)- 0°, 5°, 10° & 15° were designed and fabricated for the study. The total number of slits in each distributor was 144. The area of opening was 6220 mm2 making the percentage area of opening to 9.17. But the percentage useful area of opening of the distributor was 96.The experiments on the variation of distributor pressure drop with superficial velocity revealed that the distributor pressure drop decreases with angle of air injection. Investigations related to bed hydrodynamics were conducted using 2.5 kg of bed material. The bed pressure drop measurements were made along the radial direction of the distributor at distances of 60 mm, 90 mm, 120 mm & 150 mm from the centre of the distributor. It was noticed that after attaining minimum fluidizing velocity, the bed pressure drop increases along the radial direction of the distributor. But at a radial distance of 90 mm from the distributor centre, after attaining minimum fluidizing velocity the bed pressure drop remains almost constant. It was also observed that the bed pressure drop varies inversely with particle size as well as particle density.An attempt was made to determine the effect of various parameters on minimum fluidizing velocity. It was noticed that the minimum fluidizing velocity varies directly with angle of air injection (Φ), particle size and particle density.The study on the bed behaviour showed that the superficial velocity required for initiating various bed phenomena (such as swirl motion and separation of particles from the cone at the centre) increase with increase in particle size as well as particle density. It was also observed that the particle size and particle density directly influence the superficial velocity required for various regimes of bed behaviour such as linear variation of bed pressure drop, constant bed pressure drop and sudden increase or decrease in bed pressure drop.Experiments were also performed to study the effect of angle of air injection (Φ). It was noticed that the bed pressure drop decreases with angle of air injection. It was also noticed that the angle of air injection directly influence the superficial velocity required for initiating various bed phenomena as well as the various regimes of bed behaviour.

Photonic applications of biomaterials with special reference to biopolymers and microbes

This thesis Entitled Photonic applications of biomaterials with special reference to biopolymers and microbes. A detailed investigation will be presented in the present thesis related to direct applications of biopolymers into some selected area of photonics and how the growth kinetics of an aerial bacterial colony on solid agar media was studied using laser induced fluorescence technique. This chapter is an overview of the spectrum of biomaterials and their application to Photonics. The chapter discusses a wide range of biomaterials based photonics applications like efficient harvesting of solar energy, lowthreshold lasing, high-density data storage, optical switching, filtering and template for nano s tructures. The most extensively investigated photonics application in biology is Laser induced fluorescence technique. The importance of fluorescence studies in different biological and related fields are also mentioned in this chapter.

Studies on genetic polymorphism in Santalum Album L.

Loss of natural sandal populations due to illicit felling, forest encroachment and spike disease have an adverse effect on genetic diversity of the species. To initiate any genetic improvement programme in sandal, a precise understanding of the population genetic diversity structure is essential. The concern over the loss of genetic variability in sandal is particularly critical, as there is hardly any information regarding the diversity status of the natural populations. Identifying fast growing, disease resistant, oil rich sandal trees through breeding and their mass multiplication for afforestation are the best method for ensuring sustainable supply of superior sandalwood. The healthy sandal trees existing in heavily spike diseased area can be used as a promising starting point for any such breeding programme (Venkatesh, 1978). So far, no genetic information is available regarding the resistant nature of spike disease evaded trees left in heavily infected patches. The high rate of depletion of the superior trees in South Indian sandal reserves due to illegal felling and spike disease has necessitated an urgent need for conservation of the surviving trees.Widespread occurrence of spike disease in Marayoor forest reserve was reported in 1981 (Ghosh and Balasundaran, 1995). Because of the high density of trees and varying intensity of spike disease, Marayoor sandal population was found to be ideal for experimental studies in sandal (Ghosh et al., 1985). Fifteen trees of reserve 51 of Marayoor range had been selected as candidate plus trees for growth and spike disease evasion . These trees have been selected for mass multiplication through tissue culture technique.

A study of industrial co-operatives in kerala with special reference to modern small scale sector

The report of the Steering Committee of the Kerala State Planning Board for the preparation of the VIII five Year Plan on Industry and Hiningzslisted several factors inhibiting and promoting growth of small industrial units. Kerala's educated manpower, the native intelligence of the Keralites best suited for taking up logic—based professions and availability of a Hell—developed and broad~based physical infrastructure particularly in the transport and communications sectors, are a few of the positive factors identified. On the negative side, may be mentioned high wage rates, preference on the part of the educated for white collar Jobs, lack of entrepreneurship, paucity of essential resources for industrial use, high density of population and the distance factor which places Kerala away from the major domestic markets. In this context, it would appear that the industrial co-operative movement could possibly play a vital role in accelerating-the momentum of small industrial development of Kerala which has a Health of highly educated and skilled manpower. However, in spite of the encouragement extended by the Government, the movement does not seem to have.been picking up in the modern small scale sector. The present study is an attempt to analyse the factors that have affected the performance of the industrial co—operatives in the small scale industrial sector of Kerala.

Technological Changes and its Impact on Rubber Plantation Industry in Kerala An Econometric Study

The present study describes in detail the major technological advances in the rubber-growing industry in the lastfour decades. The major technological changes experienced in the rubber plantation industry during the period are the introduction of 'high yielding-planting materials, scientific application of fertilisers, use of pesticides, tapping during rainy season using‘rain guards, use of. yield stimulants and improved tapping methods School of Management Studies, Cochin University of Science and Technology

Environmentally-Efficient Development Management System for Greater Kochi in Kerala State”

The base concept from which the entire research problem emerged is as follows: Lack of spatial planning and effective development management system lead to urban sprawl with non-optimal density of population to support urban infrastructure on the one side causing a lesser quality of life in urban areas. On the other side it causes loss of productivity of natural ecosystems and agricultural areas due to disturbance to the ecosystems. Planned compact high density development with compatible mixed land use can go a long way in achieving environmental efficiency of development management system.

Potential public health significance of faecal contamination and multidrug-resistant Escherichia coli and Salmonella serotypes in a lake in India

To assess the prevalence of faecal coliform bacteria and multiple drug resistance among Escherichia coli and Salmonella serotypes from Vembanadu Lake. Study design: Systematic microbiological testing. Methods: Monthly collection of water samples were made from ten stations on the southern and northern parts of a salt water regulator constructed in Vembanadu Lake in order to prevent incursion of seawater during certain periods of the year. Density of faecal colifrom bacteria was estimated. E. coli and Salmonella were isolated and their different serotypes were identified. Antibiotic resistance analysis of E. coli and Salmonella serotypes was done and the MAR index of individual isolates was calculated. Results: Density of faecal coliform bacteria ranged from mean MPN value 2900 -7100/100ml. Results showed multiple drug resistance pattern among the bacterial isolates. E. coli showed more than 50% resistance to amickacin, oxytetracycline, streptomycin, tetracycline and kanamycin while Salmonella showed high resistance to oxytetracycline, streptomycin, tetracycline and ampicillin. The MAR indexing of the isolates showed that they have originated from high risk source such as humans, poultry and dairy cows. Conclusions: The high density of faecal coliform bacteria and prevalence of multi drug resistant E. coli and Salmonella serotypes in the lake may pose severe public health risk through related water borne and food borne outbreaks