Symptoms of chronic stress at work in NGO workers

Working in a NGO often involves providing life saving resources (food, medicine, equipment, water, etc) to needy populations around the globe. Such duty requires highly dedicated employees and humanitarian workers are said to face a hign degree of pressure in their daily work. Despite the evidence of taxing work demands, and a high potential for stress related problems, very few studies on occupational chronic stress have specifically looked at NGO workers. Assuming that "field stress" can relay to workers at headquarters, we carried out an exploratory study about occupational health among employees of a NGO's headquarters. We sent a questionnaire to all employees (N=130) of a NGO headquarters located in Switzerland. We used the TST questionnaire (French version of the Langner's questionnaire on psychiatric symptoms) to identify cases with potential mental health problems. We also included in the questionnaire some items about motivation, acknowledgment, work-life balance, job demand, and autonomy. A total of 75 employees answered our questionnaire (57% response rate). 44% of our sample were men (n=33) and 56% were women (n=42). The mean age was of 40 years (SD=7.6). 56% were working at the headquarters of the NGO in questions as of 2 years or less. Not surprisingly, a majority of respondents reported to be highly motivated (74%) and the meaning of work was important for 80% of them. However, 35% indicated having problems in conciliating their private and professional life. Most frequent reported symptoms included feeling "weak all over" (81%), having "trouble getting asleep often" (35%), "clogging in nose" (35%), feeling "nervous often" (33%), and "memory not all right" (33%). The score for psychiatric symptoms was high in 8 (11%) employees whose health might therefore be at risk. In comparison, other sudies showed that this proportion was 9% for French teachers and 16% for sales personnel1. Results show that symptoms of mental health problems do occur among NGO workers. Some of these symptoms are known to be linked to occupational stress. Chronic stress manifests itself first in non-specific symptoms (e.g. fatigue) and later in specific pathologies. This could explain the relatively low proportion of cases with a high score in Langner's scale than was expected. Therefore, we hypothesize a healthy worker effect. The fact that our sample is 40 years old in average, and that the turnover is quite high can also support this hypothesis. Further research is needed in order to better understand occupational stress in this specific population. An upcoming study will investigate the role of organizational factors associated with health complaints. Therefore, a longitudinal survey including quantitative and qualitative methods is appropriate.

05018-007 Storm Lake Watershed Final Report

The enclosed project request for funding will address needed conservation work within the Storm Lake Watershed. The proposed conservation practices and activities have been planned for several years but due to funding limitations have not been completed. These innovative practices will address some of the remaining and hard to address problem areas of sediment and nutrient loading within the watershed. The four goals of this project are: installation of four in-stream Boulder Weirs, planting of native grasses around ten surface intakes, completion of three urban rain gardens and hiring of a part-time Iowater monitoring coordinator. Through the new Awaysis destination park project Storm Lake is truly placing a high value on our watershed and lake as a major asset to the area. Awaysis is a $30 million project that's success will hinge on maintaining the highest standards in regard to the water quality of the lake and its watershed.

Inhibition of Notch Pathway Enhances Photoreceptor Commitment From Cultured Retinal Stem Cells

Purpose: Consequently to the principle that photoreceptors have to be at a very precise development stage to be successfully transplanted (MacLaren 2006), we are trying to mimic this development stage in vitro using retinal stem cells. The latter one isolated from the newborn mouse retina, derived from the radial glia population, which were previously isolated and characterized in our laboratory. We developed a protocol to commit these cells to the photoreceptor fate, but even if the percentage of cells expressing photoreceptor markers is high (30%), the differentiation process is incomplete so far (Merhi-Soussi 2006). Methods: In order to ameliorate photoreceptor differentiation, we hypothesized that the Notch pathway may interfere with this process by either promoting glia commitment, or maintaining an undifferentiated state. We are thus using a gamma-secretase inhibitor (DAPT), which inhibits Notch receptor cleavage and thus Notch activation. DAPT was used either during the whole differentiation stimulation, or only during a restricted period in two various retinal stem cell lines (RSC AA and RSC MP1). Results: RT-PCR performed during cell proliferation, showed the same positive expression in both cell lines for the following genes: Math3, Six3, Hes1, NeuroD, Pax6 and Notch1. Additionally, Mash1, Hes5, Prox1, Crx and Otx2 were detected in both cell lines but with a stronger expression in RSC MP1. Opposite results were obtained for Chx10. Nrl, Peripherin/RDS, GFAP and Math5 were detected neither in RSC AA, nor in RSC MP1. The constant presence of DAPT i) leads to a 233% (RSC AA) or 900% (RSC MP1) increase in peripherin/RDS-positive (photoreceptor marker) cells, compared to controls (no DAPT, n=3, P<0.02) along with a 68% (RSC AA) or 80% (RSC MP1) decrease in GFAP- positive cells (n=3, P<0.04), ii) modifies the ratio between uni-/bi- (23%) and multi- (77%) polar peripherin/RDS-positive cells to 45% and 55%, respectively, for both cell lines and iii) reduces by 50% the total cell number during the whole differentiation process for both cell lines. Conclusions: We are now exploring whether this reduction in total cell number is due to inhibition of cell proliferation or to cell death and whether photoreceptor differentiation is promoted instead of glial induction. We also want to confirm the results obtained with DAPT with RSCs isolated from Notch1-loxP mice. Such protocol may help to better mimic photoreceptor development, but this needs to be confirmed by genomic and proteomic profile analyses.

Screening of Brazilian soybean genotypes with high potential for somatic embryogenesis and plant regeneration

The aim of this work was to identify Brazilian soybean (Glycine max) genotypes with potential to respond to in vitro culture stimuli for primary somatic embryo induction, secondary embryo proliferation and plant regeneration. Differences among eight tested cultivars were observed at each stage. Two cultivars, IAS-5 and BRSMG 68 Vencedora, were selected for the evaluation of the capacity for embryo differentiation and plant regeneration. These cultivars had high embryo induction frequencies, repetitive embryogenic proliferation, and low precocious embryo germination in the initial experiment. The effect of abscisic acid (ABA) and charcoal addition on plant regeneration was investigated. The addition of ABA to proliferation medium and of ABA and activated charcoal to maturation medium increased embryo differentiation rates, which resulted in a higher number of regenerated plants. The BRSMG 68 Vencedora cultivar was found to have a high potential for embryo induction, embryo proliferation and plant regeneration. The potential of this cultivar for somatic embryogenesis was similar to that observed for cultivar IAS-5, which is currently used for soybean transformation in Brazil. BRSMG 68 Vencedora may be a good alternative genotype for soybean genetic engineering via somatic embryogenesis protocols.

Subunit composition of seed storage proteins in high-protein soybean genotypes

The objective of this work was to quantify the accumulation of the major seed storage protein subunits, β-conglycinin and glycinin, and how they influence yield and protein and oil contents in high-protein soybean genotypes. The relative accumulation of subunits was calculated by scanning SDS-PAGE gels using densitometry. The protein content of the tested genotypes was higher than control cultivar in the same maturity group. Several genotypes with improved protein content and with unchanged yield or oil content were developed as a result of new breeding initiatives. This research confirmed that high-protein cultivars accumulate higher amounts of glycinin and β-conglycinin. Genotypes KO5427, KO5428, and KO5429, which accumulated lower quantities of all subunits of glycinin and β-conglycinin, were the only exceptions. Attention should be given to genotypes KO5314 and KO5317, which accumulated significantly higher amounts of both subunits of glycinin, and to genotypes KO5425, KO5319, KO539 and KO536, which accumulated significantly higher amounts of β-conglycinin subunits. These findings suggest that some of the tested genotypes could be beneficial in different breeding programs aimed at the production of agronomically viable plants, yielding high-protein seed with specific composition of storage proteins for specific food applications.

Feasibility of Visualization and Simulation Applications to Improve Work Zone Safety and Mobility

Visualization is a relatively recent tool available to engineers for enhancing transportation project design through improved communication, decision making, and stakeholder feedback. Current visualization techniques include image composites, video composites, 2D drawings, drive-through or fly-through animations, 3D rendering models, virtual reality, and 4D CAD. These methods are used mainly to communicate within the design and construction team and between the team and external stakeholders. Use of visualization improves understanding of design intent and project concepts and facilitates effective decision making. However, visualization tools are typically used for presentation only in large-scale urban projects. Visualization is not widely accepted due to a lack of demonstrated engineering benefits for typical agency projects, such as small- and medium-sized projects, rural projects, and projects where external stakeholder communication is not a major issue. Furthermore, there is a perceived high cost of investment of both financial and human capital in adopting visualization tools. The most advanced visualization technique of virtual reality has only been used in academic research settings, and 4D CAD has been used on a very limited basis for highly complicated specialty projects. However, there are a number of less intensive visualization methods available which may provide some benefit to many agency projects. In this paper, we present the results of a feasibility study examining the use of visualization and simulation applications for improving highway planning, design, construction, and safety and mobility.

Comparison of "Live High-Train Low" in Normobaric versus Hypobaric Hypoxia.

We investigated the changes in both performance and selected physiological parameters following a Live High-Train Low (LHTL) altitude camp in either normobaric hypoxia (NH) or hypobaric hypoxia (HH) replicating current "real" practices of endurance athletes. Well-trained triathletes were split into two groups (NH, n = 14 and HH, n = 13) and completed an 18-d LHTL camp during which they trained at 1100-1200 m and resided at an altitude of 2250 m (PiO2  = 121.7±1.2 vs. 121.4±0.9 mmHg) under either NH (hypoxic chamber; FiO2 15.8±0.8%) or HH (real altitude; barometric pressure 580±23 mmHg) conditions. Oxygen saturations (SpO2) were recorded continuously daily overnight. PiO2 and training loads were matched daily. Before (Pre-) and 1 day after (Post-) LHTL, blood samples, VO2max, and total haemoglobin mass (Hbmass) were measured. A 3-km running test was performed near sea level twice before, and 1, 7, and 21 days following LHTL. During LHTL, hypoxic exposure was lower for the NH group than for the HH group (220 vs. 300 h; P<0.001). Night SpO2 was higher (92.1±0.3 vs. 90.9±0.3%, P<0.001), and breathing frequency was lower in the NH group compared with the HH group (13.9±2.1 vs. 15.5±1.5 breath.min-1, P<0.05). Immediately following LHTL, similar increases in VO2max (6.1±6.8 vs. 5.2±4.8%) and Hbmass (2.6±1.9 vs. 3.4±2.1%) were observed in NH and HH groups, respectively, while 3-km performance was not improved. However, 21 days following the LHTL intervention, 3-km run time was significantly faster in the HH (3.3±3.6%; P<0.05) versus the NH (1.2±2.9%; ns) group. In conclusion, the greater degree of race performance enhancement by day 21 after an 18-d LHTL camp in the HH group was likely induced by a larger hypoxic dose. However, one cannot rule out other factors including differences in sleeping desaturations and breathing patterns, thus suggesting higher hypoxic stimuli in the HH group.

Aggregate stability in soils cultivated with eucalyptus

The objective of this work was to evaluate the aggregate stability of tropical soils under eucalyptus plantation and native vegetation, and assess the relationships between aggregate stability and some soil chemical and physical properties. Argisols, Cambisol, Latosols and Plinthosol within three eucalyptus-cultivated regions, in the states of Espírito Santo, Rio Grande do Sul and Minas Gerais, Brazil, were studied. For each region, soils under native vegetation were compared to those under minimum tillage with eucalyptus cultivation. The aggregate stability was measured using the high-energy moisture characteristic (HEMC) technique, i.e., the moisture release curve at very low suctions. This method compares the resistance of aggregates to slaking on a relative scale from zero to one. Thus, the aggregate stability from different soils and management practices can be directly compared. The aggregate stability ratio was greater than 50% for all soils, which shows that the aggregate stability index is high, both in eucalyptus and native vegetation areas. This suggests that soil management adopted for eucalyptus cultivation does not substantially modify this property. In these soils, the aggregate stability ratio does not show a good relationship with clay or soil organic matter contents. However, soil organic matter shows a positive relationship with clay content and cation exchange capacity.

Work Zone Simulation Model, 1999

To support the analysis of driver behavior at rural freeway work zone lane closure merge points, Center for Transportation Research and Education staff collected traffic data at merge areas using video image processing technology. The collection of data and the calculation of the capacity of lane closures are reported in a companion report, "Traffic Management Strategies for Merge Areas in Rural Interstate Work Zones". These data are used in the work reported in this document and are used to calibrate a microscopic simulation model of a typical, Iowa rural freeway lane closure. The model developed is a high fidelity computer simulation with an animation interface. It simulates traffic operations at a work zone lane closure. This model enables traffic engineers to visually demonstrate the forecasted delay that is likely to result when freeway reconstruction makes it necessary to close freeway lanes. Further, the model is also sensitive to variations in driver behavior and is used to test the impact of slow moving vehicles and other driver behaviors. This report consists of two parts. The first part describes the development of the work zone simulation model. The simulation analysis is calibrated and verified through data collected at a work zone in Interstate Highway 80 in Scott County, Iowa. The second part is a user's manual for the simulation model, which is provided to assist users with its set up and operation. No prior computer programming skills are required to use the simulation model.

Traffic Control in Work Zones with Edge Drop-Offs, 2002

Pavement and shoulder edge drop-offs commonly occur in work zones as the result of overlays, pavement replacement, or shoulder construction. The depth of these elevation differentials can vary from approximately one inch when a flexible pavement overlay is applied to several feet where major reconstruction is undertaken. The potential hazards associated with pavement edge differentials depend on several factors including depth of the drop-off, shape of the pavement edge, distance from traveled way, vehicle speed, traffic mix, volume, and other factors. This research was undertaken to review current practices in other states for temporary traffic control strategies addressing lane edge differentials and to analyze crash data and resultant litigation related to edge drop-offs. An objective was to identify cost-effective practices that would minimize the potential for and impacts of edge drop crashes in work zones. Considerable variation in addressing temporary traffic control in work zones with edge drop-off exposure was found among the states surveyed. Crashes related to pavement edge drop-offs in work zones do not commonly occur in the state of Iowa, but some have resulted in significant tort claims and settlements. The use of benefit/cost analysis may provide guidance in selection of an appropriate mitigation and protection of edge drop-off conditions. Development and adoption of guidelines for design of appropriate traffic control for work zones that include edge drop-off exposure, particularly identifying effective use of temporary barrier rail, may be beneficial in Iowa.

Maintenance of Traffic for Innovative Geometric Design Work Zones, 2015

Currently there are no guidelines within the Manual on Uniform Traffic Control Devices (MUTCD) on construction phasing and maintenance of traffic (MOT) for retrofit construction and maintenance projects involving innovative geometric designs. The research presented in this report addressed this gap in existing knowledge by investigating the state of the practice of construction phasing and MOT for several types of innovative geometric designs including the roundabout, single point urban interchange (SPUI), diverging diamond interchange (DDI), restricted-crossing left turn (RCUT), median U-turn (MUT), and displaced left turn (DLT). This report provides guidelines for transportation practitioners in developing construction phasing and MOT plans for innovative geometric designs. This report includes MOT Phasing Diagrams to assist in the development of MOT strategies for innovative designs. The MOT Phasing Diagrams were developed through a review of literature, survey, interviews with practitioners, and review of plans from innovative geometric design projects. These diagrams are provided as a tool to assist in improving work zone safety and mobility through construction of projects with innovative geometric designs. The aforementioned synthesis of existing knowledge documented existing practices for these types of designs.

'Tommy Atkins' mango trees subjected to high density planting in subhumid tropical climate in northeastern Brazil

The objective of this work was to evaluate the effects of high density planting on 'Tommy Atkins' mango trees cultivated in subhumid warm tropical climate in northeastern Brazil. Treatments consisted of five spacial arrangements of plants (8x5 m, 7x4 m, 6x3 m, 5x2 m and 4x2 m), which resulted in the following plant densities: 250 (control), 357, 555, 1,000 and 1,250 plants per hectare. Plant vegetative and reproductive variables, besides fruit quality parameters, were evaluated at seven and eight years after transplantation to the field. In general, high density planting caused reduction in vegetative and reproductive variables of individual mango trees, but had little influence on fruit quality. Above 555 plants per hectare, a significant decrease was observed in mango tree growth. Furthermore, there were decreases in the percentage of flowering, fruit yield per plant and per area. However, planting density up to 357 plants per hectare, in spite of decreasing plant growth and fruit yield per tree, increases fruit yield per area in 30% in comparison to the control.

Prediction of soil orders with high spatial resolution: response of different classifiers to sampling density

The objective of this work was to evaluate sampling density on the prediction accuracy of soil orders, with high spatial resolution, in a viticultural zone of Serra Gaúcha, Southern Brazil. A digital elevation model (DEM), a cartographic base, a conventional soil map, and the Idrisi software were used. Seven predictor variables were calculated and read along with soil classes in randomly distributed points, with sampling densities of 0.5, 1, 1.5, 2, and 4 points per hectare. Data were used to train a decision tree (Gini) and three artificial neural networks: adaptive resonance theory, fuzzy ARTMap; self‑organizing map, SOM; and multi‑layer perceptron, MLP. Estimated maps were compared with the conventional soil map to calculate omission and commission errors, overall accuracy, and quantity and allocation disagreement. The decision tree was less sensitive to sampling density and had the highest accuracy and consistence. The SOM was the less sensitive and most consistent network. The MLP had a critical minimum and showed high inconsistency, whereas fuzzy ARTMap was more sensitive and less accurate. Results indicate that sampling densities used in conventional soil surveys can serve as a reference to predict soil orders in Serra Gaúcha.

Mating system parameters in a high density population of andirobas in the Amazon forest

The objective of this work was to estimate the mating system parameters of a andiroba (Carapa guianensis) population using microsatellite markers and the mixed and correlated mating models. Twelve open‑pollinated progeny arrays of 15 individuals were sampled in an area with C. guianensis estimated density of 25.7 trees per hectare. Overall, the species has a mixed reproductive system, with a predominance of outcrossing. The multilocus outcrossing rate (t m = 0.862) was significantly lower than the unity, indicating that self‑pollination occurred. The rate of biparental inbreeding was substantial (t m ‑ t s = 0.134) and significantly different from zero. The correlation of selfing within progenies was high (r s = 0.635), indicating variation in the individual outcrossing rate. Consistent with this result, the estimate of the individual outcrossing rate ranged from 0.598 to 0.978. The multilocus correlation of paternity was low (r p(m) = 0.081), but significantly different from zero, suggesting that the progenies contain full‑sibs. The coancestry within progenies (Θ = 0.185) was higher and the variance effective size (Ne(v) = 2.7) was lower than expected for true half‑sib progenies (Θ = 0.125; Ne(v) = 4). These results suggest that, in order to maintain a minimum effective size of 150 individuals for breeding, genetic conservation, and environmental reforestation programs, seeds from at least 56 trees must be collected.

Selection of common bean lines with high agronomic performance and high calcium and iron concentrations

The objective of this work was to evaluate the genetic variability of common bean lines for cycle, weight of 100 grains, grain yield, cooking time, and grain calcium and iron concentrations. Twenty-four common bean lines were evaluated in two crop cycles (2010 and 2011). The ¯Z index was used for the selection of superior lines for most of the traits. The DF 06-19, DF 06-03, DF 06-17, DF 06-20, DF 06-11, DF 06-14, DF 06-01, DF 06-08, DF 06-22, and DF 06-04 lines showed high grain yield. All lines were of semi-early cycle and of fast cooking. The DF 06-08 and DF 06-23 lines showed high calcium concentration in grains (>1.4 g kg-1 dry matter - DM), and the DF 06-09, DF 06-03, DF 06-04, and DF 06-06 lines presented high iron concentration in grains (>0.95 g kg-1 DM) in the two crop cycles. The DF 06-09 and DF 06-03 carioca lines present high agronomic performance and high iron concentration in grains. The DF 06-17 and DF 06-08 black lines present high agronomic performance and high calcium concentration in grains. The selection of the DF 06-09, DF 06-03, DF 06-17, and DF 06-08 lines is recommended.