Päällystyksen vaikutus paperin ja kartongin laserleikattavuuteen

Tämän diplomityön tarkoituksena oli selvittää päällystyksen vaikutusta paperin ja kartongin laserleikattavuuteen. Aiheeseen liittyi myös laserparametrien vaikutuksen selvittäminen leikattaessa päällystettyjä paperi- ja kartonkilaatuja. Päällystepigmentteinä käytettiin kalsiumkarbonaattia ja kaoliinia sekä niiden seosta. Leikkausnopeus alenee päällystyspigmentistä ja sen määrästä riippuen 5 – 20 % verrattuna saman neliöpainoisiin päällystämättömiin materiaaleihin. Yli 1000 W:n laserteholla leikkausnopeuden kasvu tehon funktiona pysähtyy kalsiumkarbonaatilla päällystetyillä kartongeilla. Päällystetyllä paperilla vastaava tehoraja on 1400 W. Polttopisteen optimi paikkaan päällystyksellä ei ole vaikutusta. Myöskään leikatun reunan laatuun päällystyksellä ei ole suurta vaikutusta. Leikkauksessa muodostuvat savut ovat pääasiassa selluloosan pilkkoutumistuotteita. Suuri osa savuista on myrkyllisiä, joten leikkauskohdan riittävästä ilmanvaihdosta on huolehdittava. Sopivilla prosessiparametreilla voidaan saada 10 – 20 %:n parannuksia leikkausnopeuteen.

Arkkileikkauksen tehokkuuden optimointi tuotannonsuunnittelun keinoin

Tutkimuksen tavoitteena oli tarkastella Inkeroisten kartonkitehtaan arkkileikkausprosessin tehokkuutta jälkikäsittelyosaston näkökulmasta. Työn tarkastelu keskittyi koneiden hyötysuhteiden ja arkituskustannusten perusteella tapahtuvaan tilausten leikkauskustannusten optimointiin. Tavoitteena oli kehittää tuotannonsuunnittelun apuvälineeksi leikkauskustannusten optimointimalli ja suorittaa vaikutusarviointi tuotannonsuunnittelun vakiintuneille toimintatavoille.Tilastotiedon perusteella on tarkasteltu tämän hetkistä tehokkuuden tasoa sekä laskettu kustannusvaikutukset. Kirjallisuusosuudessa on tarkasteltu toiminnanohjauksen teoriaa ja tehokkuuslaskennan menetelmiä, joiden pohjalta on pyritty kehittämään arkkileikkausprosessin tehokkuutta. Leikkauskustannuksiin vaikutti tutkimuksen mukaan ennen kaikkea arkituksen tehokkuus. Reunanauhoista aiheutuvan hylyn vaikutus oli huomattavasti pienempi. Maksimoimalla arkituksen tehokkuutta saavutettiin vähintään 20 % kustannussäästö verrattuna pituusleikkauksen hylkykustannuksen minimoimisesta aiheutuvaan kustannussäästöön.

Pienpuun hyödyntäminen havuvanerin valmistuksessa

Tämän diplomityön tavoitteena on selvittää pienpuun käytön vaikutuksia Pellos 1 ja Pellos 2 -havuvaneritehtaiden kannattavuuteen. Työssä tutkitaan myös sitä, miten suuria määriä pienpuuta Pellos 1:llä on mahdollista hyödyntää, ja millaisilla keinoilla sekä investoinneilla pienpuun sorvausta voidaan tehostaa. Tutkimuksessa esitettävät laskelmat perustuvat Pekka Hyttisen vuonna 2000 valmistuneen diplomityön koeajojen tuloksiin. Pienpuulla tarkoitetaan tässä yhteydessä latvaläpimitaltaan 170–220 millimetriä paksua tukkia. Kannattavuuslaskelmien tuloksena esitetään Pellos 1:n ja Pellos 2:n tuotantokapasiteetin, hyötysuhteen, muuttuvien kustannusten ja myyntikatteen muuttuminen puun latvaläpimittaluokan funktiona. Lisäksi vertaillaan Pellos 1:n ja Pellos 2:n tunnuslukujen välisiä suhteita ja selvitetään, kummalla tehtaalla pienpuun käyttö vanerin valmistuksen raaka-aineena on järkevämpää. Diplomityön toinen tutkimusosa koskee Pellos 1:llä käsiteltävän pienpuun maksimimäärää sekä tehtaan katkaisu- ja sorviosaston toimintaa. Pellos 1:n suurimpaan mahdolliseen pienpuun käsittelymäärään vaikuttaa teknisten ja tuotannollisten rajoitusten lisäksi myös tukkijakauman rakenne sekä pienpuun käytön lisäämisestä aiheutuva puuraaka-aineen lisätarve. Pienpuun käyttö nostaa katkaisu- ja sorviosastolla käsiteltävää puun kappalemäärää, minkä seurauksena koneiden prosessointinopeus joutuu koetukselle. Tutkimuksen lopussa käsitellään modernisointikohteita, joilla sorvauksen saantoa pystyttäisiin parantamaan ja sorvien toimintaa nopeuttamaan.

Kantavan modulaarisen kehikkorakenteen suunnittelu optimoiduksi tuotteeksi

Diplomityössä tavoitteena oli suunnitella kantava modulaarinen kehikkorakenne, joka soveltuu käytettäväksi erilaisissa tasoratkaisuissa. Suunnittelumetodina käytettiin järjestelmällistä tuotesuunnittelua. Rakenteen tuli olla modulaarinen, valmistettavissa laserleikkaamalla ja toteutettu ruuviliitoksilla. Lisäksi kehikkorakenteen suunnittelussa pyrittiin optimaalisimpaan ratkaisuun niin teknisen kuin taloudellisenkin toteutuksen kannalta. Premekon Oy investoi vuonna 2009 laserleikkuukeskukseen, jossa pystytään leikkaamaan levyjä ja palkkeja. Yhdessä oikeanlaisen tuotesuunnittelun kanssa laserleikkuukeskuksella pystytään valmistamaan tuotteita suurella tuotantotehokkuudella. Kantavan modulaarisen kehikkorakenteen kehittäminen mahdollisti laserleikkuun aiempaa tehokkaamman hyödyntämisen. Työssä tarkasteltiin yksityiskohtaisemmin erilaisten profiilien soveltuvuutta laserleikattavaksi, osien muotoilua, liitosten yhteensopivuutta ja lujuutta.

Carryover effect of fomesafen, applied on edible bean, on sucessional maize

Carryove reffects of fomesafen on successional maize were studied in clay soil. Fomesafen was applied as postemergence at Five rate s (0; 0.12 5: 0.25 ; 0.37 5, and 0.5 kg/ha-1) to edible beans. Maize was planted 198 and 65 days after fomesafen application in 1992 and 212 and 65 days after fomesafen application in 1993. Fomesafen residues were detected in soils up to 20cm depth but residue concentration was higher in 0-10 cm soil depth. Fomesafen residues reduced leaf chlrophyll content and root volume of 10 days old maize when planted 65 days after application but were not affected when planted 212 days after application. However, the decreases in leaf chlorophyll and root volume did not affect the maize yield.

Growth of the crabgrass species Digitaria ciliaris and Digitaria nuda

The aim of this research paper was to compare the growth of D. ciliaris and D. nuda crabgrass species under non-competitive conditions. To this end, two experiments were conducted, one from March - July 2010 and the other from February - June 2011. The experimental design of both trials was completely randomized making a factorial (2 seasons x 2 species crabgrass x 12 evaluation periods) with four replications. Assessments began at 15 days after sowing (DAS), and repeated weekly until 92 DAS. The variables evaluated were total dry matter (roots+leaves+stems), leaf area, leaf number and tiller. The results were submitted to analysis of variance and the absolute growth rate, relative growth rate and leaf area ratio were calculated using the means, which were adjusted regression models. The crabgrass species were significantly different in leaf area, leaf number, tiller number and dry matter per plant. D. ciliaris for all variables was statistically higher than D. nuda. Regarding the speed at which the growth of the species occurred, the absolute growth rate and relative growth rate of D. ciliaris was also greater than D. nuda. In addition, D. ciliaris also had a lower leaf area ratio indicating greater efficiency in converting light energy into carbohydrates. It can be concluded that D. ciliaris has a higher growth rate in conditions where there is no limitation of nutrients and water availability in relation to D. nuda, mainly due to D. ciliaris have greater leaf area, number of leaves and dry matter accumulation per plant.

Potential of macrophyte for removing arsenic from aqueous solution

The potential of three aquatic macrophytes, Azoll caroliniana, Salvinia minima and Lemna gibba, was evaluated in this work aimed at selection of plants to be used in remediation of environments contaminated by arsenic (As). The experiments were carried out in a greenhouse during six days in pots containing Hoagland solution (¼ ionic strength) at As concentrations of 0.5; 2.5 and 5.0 mg L-1. The three species showed greater As accumulation as the concentration of the metalloid in solution increased. However, a reduction was detected in fresh and dry mass gain when the plants were exposed to high As concentrations. The macrophytes showed differences in efficiency of removal of As in solution. A. caroliniana, S. minima and L. gibba accumulated, on average, 0.130; 0.200; and 1.397 mg mDM-1, respectively, when exposed to 5.0 mg L-1 of As. The macrophytes absorbed a greater quantity of As in solution with low phosphate content. The greater As concentration in L. gibba tissues lowered the chlorophyll and carotenoid contents as shown by the high chlorosis incidence. Lemna gibba also exhibited a decrease in leaf size, with the total chlorophyll and carotenoid synthesis not being affected by As in A. caroliniana. This species exhibited purplish leaves with high concentration of anthocyanin, whose presence suggested association to phosphate deficiency. Marginal necrosis occurred on S. minima floating leaves, with the released daughter-plants not showing any visual symptoms during the treatment. The percentage of As removed from the solution decreased when the plants were exposed to high concentrations of the pollutant. Among the three species studied, only L. gibba could be considered an As hyper-accumulator. The use of this plant species for remediation of aquatic environments was shown to be limited and requires further investigation.

Competition between drought-tolerant upland rice cultivars and weeds under water stress condition

The objective of this study was to evaluate the competitiveness of two cultivars of upland rice drought-tolerant, cultured in coexistence with weed S. verticillata, under conditions of absence and presence of water stress. The experiment was conducted in a greenhouse at the Experimental Station of the Universidade Federal de Tocantins, Gurupi-TO Campus. The experimental design was completely randomized in a factorial 2 x 2 x 4 with four replications. The treatments consisted of two rice cultivars under two water conditions and four densities. At 57 days after emergence, were evaluated in rice cultivars and weed S. verticillata leaf area, dry weight of roots and shoots and total concentration and depth of roots. Was also evaluated in rice cultivars, plant height and number of tillers. Water stress caused a reduction in leaf area, the concentration of roots and vegetative components of dry matter (APDM, and MSR MST) of rice cultivars and Jatoba Catetão and weed S. verticillata. The competition established by the presence of the weed provided reduction of all vegetative components (MSPA, and MSR MST) of cultivars and Jatoba Catetão. It also decreased the number of tillers, the concentration of roots and leaf area. At the highest level of weed competition with rice cultivars, a greater decrease in vegetative components and leaf area of culture, regardless of water conditions.

Allelopathic action of parthenium and its rhizospheric soil on maize as influenced by growing conditions

Biosynthesis and subsequent release of allelochemicals by a plant into the environment is supposed to be influenced by its growing conditions. To ascertain what will be the allelopathic action of plant parts and rhizospheric soils of parthenium (Parthenium hysterophorus) growing at various farm locations with varied growing conditions, germination and seedling growth of maize hybrid (DK 6142) were assayed by sowing its seeds in petri plates lined with filter paper and pots filled with soil. Minimum germination percentage (30.0%), germination index (2.01), germination energy (36.3), seedling length (3.3 cm), seedling biomass (10 mg) and seedling vigor index (99.0) of maize were observed in leaf extract followed by fruit and whole plant extracts of parthenium growing near the field border. Rhizospheric soil collected underneath parthenium growing near a water channel caused maximum reductions in germination index (30.8%), germination energy (40.6%), seedling length (32.6%), seedling biomass (35.1%) and seedling vigor index (34.3%) of maize compared with that soil without any vegetation. Phytotoxic inhibitory effects of both parthenium plant and rhizospheric soil were more pronounced on maize root than its shoot growth. The higher suppressive action against germination and seedling growth of maize was probably due to higher total phenolic concentrations (6678.2 and 2549.0 mg L-1) and presence of phenolic compounds viz., gallic, caffeic, 4-hydroxy-3-methoxy benzoic, p-coumaric and m-coumaric acids; and ferulic, vanillic, syringic and m-coumaric acids in aqueous leaf extract of parthenium uprooted near the field border and its rhizospheric soil collected near a water channel, respectively.

Does Gamma-aminobutyric acid function as a plant resistance mechanism against phytophagous insect activity? /

Gamma-aminobutyric acid (GAB A) is a ubiquitous non-protein amino acid synthesized via the decarboxylation of L-glutamate in a reaction catalyzed by the cytosolic enzyme L-glutamate decarboxylase (GAD). In animals it functions as an inhibitory neurotransmitter. In plants it accumulates rapidly in response to various stresses, but its function remains unclear. The hypothesis that GABA accumulation in leaf tissue may function as a plant resistance mechanism against phytophagous insect activity was investigated. GABA accumulation in response to mechanical stimulation, mechanical damage and insect activity was demonstrated. In wt tobacco (Nicotiana tabacum cv Samsun), mechanical stimulation or damage caused GABA to accumulate within 2 min from mean levels of 14 to 37 and 1~9 nmol g-l fresh weight (FW), respectively. In the transgenic tobacco strain CaMVGAD27c overexpressing Petunia GAD, the same treatments caused GABA to accumulate from 12 to 59 and 279 nmol g-l FW, respectively. In the transgenic tobacco strain CaMVGADilC 11 overexpressing Petunia GAD lacking an autoinhibitory domain, mechanical stimulation or damage caused GABA to accumulate from 180 to 309 and 630 nmol g-l FW, respectively. Ambulatory activity by tobacco budworm (TBW) larvae (Heliothis virescens) on leaves of CaMVGAD27c tobacco caused GABA to accumulate from 28 to 80 nmol g-l FW within 5 min. Ambulatory and leaf-rolling activity by oblique banded leaf roller (OBLR) larvae (Choristoneura rosaceana cv Harris) on wt soybean leaves (Glycine max cv Harovinton) caused GABA to accumulate from 60 to 1123 nmol g-l FW within 20 min. Increased GABA levels in leaf tissue were shown to affect phytophagous preference in TBW larvae presented with wt and transgenic tobacco leaves. When presented with leaves of Samsun wt and CaMVGAD27c plants, TBW larvae consumed more wt leaf tissue (640 ± 501 S.D. mm2 ) than transgenic leaf tissue (278 ± 338 S.D. mm2 ) nine times out of ten. When presented with leaves of Samsun wt and CaMVGAD~C11 plants, TBW larvae consumed more transgenic leaf tissue (1219 ± 1009 S.D. mm2 ) than wt leaf tissue (28 ± 31 S.D. mm2 ) ten times out of ten. These results indicate that: (1) ambulatory activity of insect larvae on leaves results in increased GABA levels, (2) transgenic tobacco leaves with increased capacity for GABA synthesis deter feeding, and (3) transgenic tobacco leaves with constitutively higher GABA levels stimulate feeding.

Détection et caractérisation génétique de Listeria monocytogenes dans une usine d’abattage/découpe de porcs au Québec

Listeria monocytogenes (L. monocytogenes) est un pathogène majeur en santé publique comme les épisodes de 2008 dans les fromages et les charcuteries l’ont démontré. Au Canada, il n’y a pas de surveillance règlementaire de ce microorganisme dans les étapes précédant la transformation de produits prêts-à-manger. Ainsi, la présence et la circulation de ce microorganisme dans ces environnements est peu documentée. Pour décrire ces phénomènes, nous avons effectué un échantillonnage dans une usine d’abattage et de découpe de porcs au Québec, principalement dans les parcs d’attente, et dans l’environnement de l’abattage et de découpe : les échantillonages ont été effectués après lavage et désinfection sur une période de 2 ans. Un nombre de 874 échantillons a été récoltés. Le protocole de détection utilisé était inspiré de la méthode MFHPB-30 de Santé Canada. Les sérotypes ont été obtenus par PCR et les isolats caractérisés par un génotypage RFLP-PFGE en utilisant les enzymes de restriction Apa1 et Asc1. Nous avons détecté la présence de Listeria monocytogemes dans toutes ces étapes de la production. De ces échantillons positifs, 4 sérotypes (principalement 1/2b) ont émergé. Les patrons PFGE ont démontré la présence d’une variété de génotypes dans les zones d’attente et d’abattage de l’usine et la présence d’un type majeur dans l’environnement de la zone de découpe (le type 1 représentant 96.1% des souches à cette étape). De plus, nous avons démontré des liens entre les souches retrouvés au début de la production, en attente, et les souches retrouvées dans la zone de découpe. Ces résultats suggèrent que Listeria monocytogenes entre dans l’usine avec les animaux, contamine les étapes suivantes de la production et que certaines souches peuvent être sélectionnées et leur croissance favorisé dans l’environnement, devenant majoritaires, persistantes et préoccupantes en regars de la santé publique.

Analysis of System Signals Based on Cross Recurrence Method for System Dynamics Characterization

Natural systems are inherently non linear. Recurrent behaviours are typical of natural systems. Recurrence is a fundamental property of non linear dynamical systems which can be exploited to characterize the system behaviour effectively. Cross recurrence based analysis of sensor signals from non linear dynamical system is presented in this thesis. The mutual dependency among relatively independent components of a system is referred as coupling. The analysis is done for a mechanically coupled system specifically designed for conducting experiment. Further, cross recurrence method is extended to the actual machining process in a lathe to characterize the chatter during turning. The result is verified by permutation entropy method. Conventional linear methods or models are incapable of capturing the critical and strange behaviours associated with the dynamical process. Hence any effective feature extraction methodologies should invariably gather information thorough nonlinear time series analysis. The sensor signals from the dynamical system normally contain noise and non stationarity. In an effort to get over these two issues to the maximum possible extent, this work adopts the cross recurrence quantification analysis (CRQA) methodology since it is found to be robust against noise and stationarity in the signals. The study reveals that the CRQA is capable of characterizing even weak coupling among system signals. It also divulges the dependence of certain CRQA variables like percent determinism, percent recurrence and entropy to chatter unambiguously. The surrogate data test shows that the results obtained by CRQA are the true properties of the temporal evolution of the dynamics and contain a degree of deterministic structure. The results are verified using permutation entropy (PE) to detect the onset of chatter from the time series. The present study ascertains that this CRP based methodology is capable of recognizing the transition from regular cutting to the chatter cutting irrespective of the machining parameters or work piece material. The results establish this methodology to be feasible for detection of chatter in metal cutting operation in a lathe.

Ciencias de la complejidad: estado actual

Los aportes teóricos y aplicados de la complejidad en economía han tomado tantas direcciones y han sido tan frenéticos en las últimas décadas, que no existe un trabajo reciente, hasta donde conocemos, que los compile y los analice de forma integrada. El objetivo de este proyecto, por tanto, es desarrollar un estado situacional de las diferentes aplicaciones conceptuales, teóricas, metodológicas y tecnológicas de las ciencias de la complejidad en la economía. Asimismo, se pretende analizar las tendencias recientes en el estudio de la complejidad de los sistemas económicos y los horizontes que las ciencias de la complejidad ofrecen de cara al abordaje de los fenómenos económicos del mundo globalizado contemporáneo.

Microbial impacts on plant-herbivore interactions: the indirect effects of a birch pathogen on a birch aphid

The role of indirect interactions in structuring communities is becoming increasingly recognised. Plant fungi can bring about changes in plant chemistry which may affect insect herbivores that share the same plant, and hence the two may interact indirectly. This study investigated the indirect effects of a fungal pathogen (Marssonina betulae) of silver birch (Betula pendula) on an aphid (Euceraphis betulae), and the processes underpinning the interaction. There was a strong positive association between natural populations of the aphid and leaves bearing high fungal infection. In choice tests, significantly more aphids settled on leaves inoculated with the fungus than on asymptomatic leaves. Individual aphids reared on inoculated leaves were heavier, possessed longer hind tibiae and displayed enhanced embryo development compared with aphids reared on asymptomatic leaves; population growth rate was also positively correlated with fungal infection when groups of aphids were reared on inoculated branches. Changes in leaf chemistry were associated with fungal infection with inoculated leaves containing higher concentrations of free-amino acids. This may reflect a plant-initiated response to fungal attack in which free amino acids from the degradation of mesophyll cells are translocated out of infected leaves via the phloem. These changes in plant chemistry are similar to those occurring during leaf senescence, and are proposed as the mechanistic basis for the positive interaction between the fungus and aphid.

Food-chain transfer of cadmium and zinc from contaminated Urtica dioica to Helix aspersa and Lumbricus terrestris

The present study examines the potential of Urtica dioica as an ecologically relevant species for use in ecotoxicological testing. It is prevalent in degraded ecosystems and is a food source for invertebrates. Urtica dioica grown in hydroponic solutions containing from less than 0.003 to 5.7 mg Cd/L or from 0.02 to 41.9 mg Zn/L accumulated metals resulting in leaf tissue concentrations in the range of 0.10 to 24.9 mg Cd/kg or 22.5 to 2,772.0 mg Zn/kg. No toxicological effects were apparent except at the highest concentrations tested, suggesting that this species may be an important pathway for transfer of metals to primary plant consumers. Helix aspersa and Lumbricus terrestris were fed the Cd- and Zn-rich leaves of U. dioica for six and four weeks, respectively. Cadmium and Zn body load increased with increasing metal concentration in the leaves (p < 0.001). Ratios of invertebrate metal concentration to leaf metal concentration were in the range of 1:0.03 to 1:1.4 for Cd and 1:0.2 to 1:2.8 for Zn in H. aspersa and 1:0.002 to 1:3.9 for Cd and 1:0.2 to 1:8.8 for Zn in L. terrestris. Helix aspersa Cd and Zn tissue concentrations (15.5 and 1,220.2 mg/kg, respectively) were approximately threefold those in L. terrestris when both species were fed nettle leaves with concentrations of approximately 23 mg Cd/ kg and 3,400 mg Zn/kg. Models demonstrate that L. terrestris Cd tissue concentrations (r(2) = 0.74, p < 0.001) and H. aspersa Zn tissue concentrations (r(2) = 0.69, p < 0.001) can be estimated from concentrations of Cd and Zn within the leaves of U. dioica and suggest that reasonably reproducible results can be obtained using these species for ecotoxicological testing.