TGA/FTIR study of tobacco and glycerol–tobacco mixtures

In this work, the evolution with temperature of the qualitative composition of the gases evolved in the pyrolysis of glycerol, tobacco and tobacco–glycerol mixtures has been studied. The pathways for different types of compounds (i.e., water, CO, CO2, carbonylic compounds, alkenyl or alkyl groups containing compounds, alcohols and phenols and aromatic compounds) have been established, and their relationship with the different reaction steps involved in the pyrolysis process have been suggested. The comparison among the behavior observed in the pyrolysis of tobacco, glycerol and a mixture glycerol–tobacco has permitted us to suggest possible interactions between tobacco and glycerol affecting the composition of the gases evolved.

The Standard of Proof in EC Merger Control-Conclusions from the Sony BMG Saga. IES WORKING PAPER 4/2008

One of the most important developments in EC competition policy during 2006 was the Court of First Instance’s (CFI) Impala v. Commission judgment annulling the European Commission’s approval of the merger between the music units of Sony and Bertelsmann. It harshly criticized the Commission’s Decision because it found that the evidence relied on was not capable of substantiating the conclusion. This was the first time that a merger decision was annulled for not meeting the requisite legal standard for authorizing the merger. Consequently, the CFI raised fundamental questions about the standard of proof incumbent on the Commission in its merger review procedures. On July 10, 2008, the European Court of Justice overturned Impala, yet it did not resolve the fundamental question underlying the judicial review of the Sony BMG Decision; does the Commission have the necessary resources and expertise to meet the Community Court’s standard of proof? This paper addresses the wider implications of the Sony BMG saga for the Commission’s future handling of complex merger investigations. It argues that the Commission may have set itself an impossible precedent in the second approval of the merger. While the Commission has made a substantial attempt to meet the high standard of proof imposed by the Community Courts, it is doubtful that it will be able to jump the fence again in a similar fashion under normal procedural circumstances.

The Principle of Common Concern and Climate Change

Effective policies combating global warming and incentivising reduction of greenhouse gases face fundamental collective action problems. States defending short term interests avoid international commitments and seek to benefit from measures combating global warming taken elsewhere. The paper explores the potential of Common Concern as an emerging principle of international law, in particular international environmental law, in addressing collective action problems and the global commons. It expounds the contours of the principle, its relationship to common heritage of mankind, to shared and differentiated responsibility and to public goods. It explores its potential to provide the foundations not only for international cooperation, but also to justify, and delimitate at the same time, unilateral action at home and deploying extraterritorial effects in addressing the challenges of global warming and climate change mitigation. As unilateral measures mainly translate into measures of trade policy, the principle of Common Concern is inherently linked and limited by existing legal disciplines in particular of the law of the World Trade Organization.

An analysis of the distinction between deep and shallow expert systems /

This paper analyzes the relationship between the techniques used to build expert systems and the behaviors they exhibit to show that there is not sufficient evidence to link the behavioral shortcomings of first-generation expert systems to the shallow methods of representation and inference they employ. There is only evidence that the shortcomings are a consequence of a general lack of knowledge. Moreover, the paper shows that the first-generation of expert systems employ both shallow methods and most of the so-called deep methods. Lastly, we show that deeper methods augment but do not replace shallow reasoning methods; most expert systems should possess both."

Of Elephants and Toothaches : Ethics, Politics, and Religion in Krzysztof Kieslowski's 'Decalogue' /

This collection is the first to offer a genuinely interdisciplinary approach to Krzysztof Kie?lowski’s Decalogue, a ten-film cycle of modern tales that touch on the ethical dilemmas of the Ten Commandments. The cycle’s deft handling of moral ambiguity and inventive technique established Kie?lowski as a major international director. Kie?lowski once said, “Both the deep believer and the habitual skeptic experience toothaches in exactly the same way.” Of Elephants and Toothaches takes seriously the range of thought, from theological to skeptical, condensed in the cycle’s quite human tales. Bringing together scholars of film, philosophy, literature, and several religions, the volume ranges from individual responsibility, to religion in modernity, to familial bonds, to human desire and material greed. It explores Kie?lowski’s cycle as it relentlessly solicits an ethical response that stimulates both inner disquiet and interpersonal dialogue.

Association between in-utero exposure to diesel exhaust and N-acetyl-cysteine supplementation in hyperlipidemic pregnant mice and development of atherosclerosis at multiple vascular sites in the offspring

Thesis (Master's)--University of Washington, 2016-06

Item validity of the physical demands from the Dictionary of Occupational Titles for the functional capacity evaluation of clients with chronic back pain

This study assessed the item validity of 15 of the physical demands from the Dictionary of Occupational Titles (DOT), as evaluated in a new approach to functional capacity evaluation (FCE) for clients with chronic back pain, the Gibson Approach to FCE (GAPP FCE). Fifty-two occupational therapists were sent the specifications of the items in the GAPP FCE procedures and were asked to rate the items in terms of item-objective congruence, relevance and difficulty. A response rate of 59.2% was obtained. The majority of the therapists agreed that most of the items were congruent with the objectives based on the definition of the physical demands from the DOT. The items evaluating Balancing and Pushing and Pulling had the lowest item-objective congruence. The evaluation of Balancing and the Lifting, Carrying and Pushing and Pulling of loads greater than light-medium weight (10–16 kg) were not considered significantly relevant. Concerns were raised about the difficulty and safety of the evaluation of Lifting, Carrying and Pushing and Pulling with clients with chronic back pain, particularly if the therapist evaluates the manual handling of medium to heavy loads. These results may have implications for other FCEs, particularly those which are based on the DOT, or when assessing clients with chronic back pain.

An e-health needs assessment of medical residents in Cameroon

Medical residents from Yaounde I University in Cameroon are required to spend periods of time in rural or remote locations to complete their training. To determine if e-health might lessen their isolation and enhance patient care, a needs assessment of the residents was performed using a brief questionnaire (five items) about the situation in which residents found themselves outside their medical school environment. We gave the questionnaires to 45 residents. Seventeen questionnaires had been returned at the time of the site visit, a response rate of 38%. Most residents indicated that the ability to contact a mentor would have either made them feel more confident (16, or 94%) or altered their handling of recent cases (15, or 88%). All residents had access to a mobile phone, and many (11, or 65%) had used it to contact a medical colleague for guidance. A low-cost and technologically simple telemedicine solution that maximized use of mobile phone capability, provided access to medical and health-care information, and permitted exchange of images would be an appropriate response to the identified needs.

Postharvest infection of Freesia hybrida flowers by Botrytis cinerea

'Specking' on harvested freesia (Freesia hybrida) flowers is a problem worldwide. The disease is caused by the fungal pathogen Botrytis cinerea. This disease symptom detracts from appearance and reduces marketability of the flowers. Unlike other important cut flower crops (e.g. gerbera), the mode of infection and epidemiology of postharvest freesia flower specking caused by B. cinerea has not been reported. Epidemiological studies were carried out under simulated conditions typical of those occurring during postharvest handling of freesia flowers. Infection of freesia flowers by B. cinerea occurred when a conidium germinated, formed a germ tube(s) and penetrated epidermal cells. Fungal hyphae then colonised adjacent cells, resulting in visible lesions. Different host reactions were observed on freesia 'Cote d'Azur' petals at 20 degrees C compared to 5 degrees C. The infection process was relatively rapid at 20 degrees C, with visible lesions produced within 7 h of incubation. However, lesion expansion ceased after 24 h of incubation. Infection was slower at 5 degrees C, with visible lesions produced after 48 h of incubation. However, lesion development at 5 degrees C was continuous, with lesions expanding over 4 days. Light microscopy observations revealed increased host defence reactions during infection. These reactions involved production of phenolic compounds, probably lignin and/or callose, around infection sites. Such substances may play a role in restricting petal colonisation and lesion expansion. Disease severity and lesion numbers on freesia flowers incubated at 12 degrees C were higher, but not significantly higher (P > 0.05), than on those incubated at 20 degrees C. Disease severity and progression were differentially mediated by temperature and relative humidity (R. H.). Infection of freesia flowers was severe at 100% R. H. for all three incubation temperatures of 5, 12 and 20 degrees C. In contrast, no lesions were produced at 80 to 90% R. H. at either 5 or 20 degrees C.

The Synthesis and properties of functionalised polymers

The aim of this project was to synthesise fluorinated polymers that might act as hot material in a guest-host system for use in non-linear optical applications. These polymers would be expected to have the advantage over materials such as poly(vinylidene fluoride) which is known to be incompatible with many nlo active materials. A series of bicyclic fluorinated monomers was prepared by the reaction of fluorinated dienophiles with cyclopentadiene in a series of Diels-Alder reactions. The monomers were purified and then used in ring opening metathesis polymerisation. The materials were then characterised by gel permeation chromatography and nuclear magnetic resonance spectroscopy and cast as films for determination of their activities as nlo materials using a Nd/YAG laser system. The second harmonic intensity of each was measured relative to quartz. However no materials of significant activity were produced. In an attempt to produce polymers that might subsequently be functionalised the polymerisation of 1,2-methylenedioxybenzene and 1,4-benzodioxane was investigated.

The intermediate pyrolysis and catalytic steam reforming of brewers spent grain

Brewers spent grain (BSG) is a widely available feedstock representing approximately 85% of the total by-products generated in the brewing industry. This is currently either disposed of to landfill or used as cattle feed due to its high protein content. BSG has received little or no attention as a potential energy resource, but increasing disposal costs and environmental constraints are now prompting the consideration of this. One possibility for the utilisation of BSG for energy is via intermediate pyrolysis to produce gases, vapours and chars. Intermediate pyrolysis is characterised by indirect heating in the absence of oxygen for short solids residence times of a few minutes, at temperatures of 350-450 °C. In the present work BSG has been characterised by chemical, proximate, ultimate and thermo-gravimetric analysis. Intermediate pyrolysis of BSG at 450 °C was carried out using a twin coaxial screw reactor known as Pyroformer to give yields of char 29%, 51% of bio-oil and 19% of permanent gases. The bio-oil liquid was found to separate in to an aqueous phase and organic phase. The organic phase contained viscous compounds that could age over time leading to solid tars that can present problems in CHP application. The quality of the pyrolysis vapour products before quenching can be upgraded to achieve much improved suitability as a fuel by downstream catalytic reforming. A Bench Scale batch pyrolysis reactor has then been used to pyrolyse small samples of BSG under a range of conditions of heating rate and temperature simulating the Pyroformer. A small catalytic reformer has been added downstream of the reactor in which the pyrolysis vapours can be further cracked and reformed. A commercial reforming nickel catalyst was used at 500, 750 and 850 °C at a space velocity about 10,000 L/h with and without the addition of steam. Results are presented for the properties of BSG, and the products of the pyrolysis process both with and without catalytic post-processing. Results indicate that catalytic reforming produced a significant increase in permanent gases mainly (H2 and CO) with H2 content exceeding 50 vol% at higher reforming temperatures. Bio-oil yield decreased significantly as reforming temperature increased with char remaining the same as pyrolysis condition remained unchanged. The process shows an increase in heating value for the product gas ranging between 10.8-25.2 MJ/m as reforming temperature increased. © 2012 Elsevier B.V. All rights reserved.

Role of plasma in femtosecond laser pulse propagation

This paper describes physics of nonlinear ultra-short laser pulse propagation affected by plasma created by the pulse itself. Major applications are also discussed. Nonlinear propagation of the femtosecond laser pulses in gaseous and solid transparent dielectric media is a fundamental physical phenomenon in a wide range of important applications such as laser lidars, laser micro-machining (ablation) and microfabrication etc. These applications require very high intensity of the laser field, typically 1013–1015 TW/cm2. Such high intensity leads to significant ionisation and creation of electron-ion or electron-hole plasma. The presence of plasma results into significant multiphoton and plasma absorption and plasma defocusing. Consequently, the propagation effects appear extremely complex and result from competitive counteraction of the above listed effects and Kerr effect, diffraction and dispersion. The theoretical models used for consistent description of laser-plasma interaction during femtosecond laser pulse propagation are derived and discussed. It turns out that the strongly nonlinear effects such self-focusing followed by the pulse splitting are essential. These phenomena feature extremely complex dynamics of both the electromagnetic field and plasma density with different spatio-temporal structures evolving at the same time. Some numerical approaches capable to handle all these complications are also discussed. ©2006 American Institute of Physics

Fibre-grating sensors for the measurement of physiological pulsations

Mechanical physiological pulsations are movements of a body surface incited by the movements of muscles in organs inside the body. Here we demonstrate the use of long-period grating sensors in the detection of cardio-vascular pulsations (CVP), in particular apex and carotid pulsations. To calibrate the sensors, we use a mechanical tool designed specifically to measure the sensor response to a localized perturbation at different grating curvatures as working points. From the data we infer the amplitude of the CVP. Together with the electrophysiological signals, the CVP signals obtained from the sensors can provide significant information on heart function which is inaccessible to the electrocardiogram. The low cost and easy handling of the fibre sensors increase their prospects to become the sensors of choice for novel diagnostic devices. © 2013 The Royal Swedish Academy of Sciences.

Vulnerability of exporting nations to the development of a carbon label in the United Kingdom

Carbon labels inform consumers about the amount of greenhouse gases (GHGs) released during the production and consumption of goods, including food. In the future consumer and legislative responses to carbon labels may favour goods with lower emissions, and thereby change established supply chains. This may have unintended consequences. We present the carbon footprint of three horticultural goods of different origins supplied to the United Kingdom market: lettuce, broccoli and green beans. Analysis of these footprints enables the characterisation of three different classes of vulnerability which are related to: transport, national economy and supply chain specifics. There is no simple relationship between the characteristics of an exporting country and its vulnerability to the introduction of a carbon label. Geographically distant developing countries with a high level of substitutable exports to the UK are most vulnerable. However, many developing countries have low vulnerability as their main exports are tropical crops which would be hard to substitute with local produce. In the short term it is unlikely that consumers will respond to carbon labels in such a way that will have major impacts in the horticultural sector. Labels which require contractual reductions in GHG emissions may have greater impacts in the short term.