Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

O potencial transformador das relações públicas comunitárias: um estudo de caso sobre o projeto de extensão Taquara

The present work refers to graduation media with specialization in Public Relations and intends to observe the potential for social transformation present in the work of the Community public relations and critical development of the profession in a community, from the perspective of economics concepts creative. Specifically highlights this practice in the community and region of Bauru from observation and evaluation of the work done by the author for two and a half years in project Taquara extension, along with Project Bamboo, which has bamboo as a focus of study and its extension actions. Encompasses the perceptions of the author on existing work in the third sector challenges and observes the realization of a participatory planning process and creating a communication plan as a contribution to the growth of the project

Análise geoestatística da variabilidade espacial do acabamento com tingidor em painéis de madeira colada lateralmente

Classical statistical techniques which necessarily assume that all sampling units are random and independent were always used in the timber industry. Geostatistics considers that certain phenomena are characterized by spatial dependence: values of sampling units closer to each other tend to be more similar than values of sampling units farther away. This study aimed to characterize the spatial variability of the finishing (dyer) in the upper and lower surfaces of four edge glued panels by using geostatistical methods using geoR. Semivariograms were constructed for the analysis of spatial dependence. The spherical mathematical model was the best fit to the semivariograms generated, and was done the interpolation of the data (kriging) in samples where the distribution of dyer presents spatial dependence. In the bottom surfaces of two panels where the spatial dependence was detected geostatistical methods characterized a very large spatial variability due to the heterogeneous application of the finishing

Análise da influência da concentração de feixeis de fibras de bambu em ensaios de piso

Bamboo has one of the highest growth rates among plants, however, its lignifications (which confers resistance) takes around a few years and, therefore, certain physical characteristics and mechanical, that depend on this process will only be acquired between the three to six years old. In addition, bamboo also has significant density variations in different parts of the stem, both in the radial direction as the axial. In particular the radial direction, where the density found in the inner and outer (near the bark) of a single stem can range on average from 0.5 to 0.9 g/cm3. Thus, the application of bamboo as a floor, there to examine whether both sides of the bamboo (internal and external), provide resistance properties required for that purpose. In this study sought to characterize and quantify the influence of the concentration of fiber bundles in the inner and outer sides of rules or bamboo strips of bamboo flooring through testing service. Analyses performed were based on ASTM D 2394- 83 for wooden floors and derivatives. This was necessary because of the absence of a specific prohibition of the use and testing of floors made of bamboo and its products. The data were analyzed by ball indentation test shooting, test for resistance to abrasion, indentation test for stress / load treadmill test and by indentation loads applied to small areas - test the jump. The results of the tests were extremely friendly bamboo, even this presents considerable differences between the resistances obtained from assay of the cover of the inner and outer face, being comparable with those of many commonly used to manufacture wood flooring. This comparison was made possible by information from technical trials of several floors made with wood

Estudo de compósitos de madeira com reforço em bambu para utilização em mobiliário

Bamboo has been studied because of its peculiar mechanical properties and numerous possibilities of use, besides being a fast-growing grass and short cutting cycle. This study aimed to analyze the mechanical characteristics of wood-bamboo composite material, where the samples were developed from the combination of layers of bamboo as a structural reinforcement in solid pieces of pine and EGP panel parts. The species of wood used was Pinus taeda, and the bamboo species Guadua angustifolia and Dendrocalamus giganteus. All work was conducted at the Universidade Estadual Paulista - UNESP in the laboratory of Physical and Mechanical Properties of Wood. Tests including the density and tension parallel to grain of the bamboo species used and the static bending of composites in order to use this in the furniture industry. For the tests have been used as a basis the requirements of the normative document NBR 7190/97. The values obtained in the tests showed a significant increase in strength and stiffness compared to unreinforced parts, where there was an increase in MOE and MOR in static bending in all specimens used in evidence. The results showed the possibility of reducing sections in furniture components and the possibility of improving the mechanical properties of parts with defects found in wood of Pinus Itapeva region of São Paulo

Sucessão estratigráfica do Andar Alagoas na Serra do Tonã, Bacia do Tucano (BA)

STRATIGRAPHIC SUCCESSION OF ALAGOAS STAGE ON SERRA DO TONÃ, TUCANO BASIN (BAHIA). Located in northeast of Bahia, serra do Tonã is a NS elongated plateau that standsout in the flattened relief of Tucano Basin. The stratigraphic succession belongs to the Aptian post-rift sequence of this basin. Based on facies analysis, vertical stratigraphic profiles and satelite images interpretation, three stacked stratigraphic units were recognized: (1) lower carbonate unit, composed by laminated limestones and breccias, 5 m thick, correlated with Camadas Batateira of Arripe Basin; (2) intermediate siliciclastic unit, 100m thick and made of sandstones exhibiting finning upward cycles, overlaid by mudstones and sandstones wich sedimentary structures suggest action of tidal currents and (3) upper carbonate unit, composed by laminated limestones, 2-10 m thick, related with Santana Formation, that record lacustrine environment with possible marine influence. Paleocurrent analysis indicates proviniance from north and paleoflows towards south, similar to the Aptian fluvial facies of Araripe Basin, showing that both basins integrated the same continental paleodrainage

Área de vida e biologia reprodutiva da maria-da-restinga (Phylloscartes kronei) (Aves, Tyrannidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da influência do agente nucleante )ALTi5%B1%) na microestrutura de chapas AA8011 obtidas por lingotamento contínuo

The aluminum includes several properties with excellent relation between weight and mechanical resistance. With technological advances, increasingly demand the development of new alloys and other production processes in order to reduce the cost of production and insert these new alloys in broader applications. The process of continuous caster (TRC promoted the unite of the aluminum smelting process with the first stage of rolling, making it most economical through the merger these two phases besides transform the continuous casting process. The AA8xxx series is one of the most versatile aluminum alloys and the most often used in continuous caster process provided a great potential application in the market. In order to further, optimize the process it is necessary to increase awareness of the aluminum solidification phenomena associated with the addition of grain refiner, and control of some aluminum production parameters in the process (production rate, metal temperature, etc.). In this study, AA8011 alloy samples were taken in the raw state obtained by the continuous casting process. The samples were laminated to a thickness of 7mm during the process itself and analyzed at three points along its width by microstructural analysis throughout its thickness, the variation rate of addition of the grain refiner in order to assess the influence of this addition with crystallographic formation and some formation of intermetallic precipitates during the solidification. Through this work, it was possible to improve the knowledge related to the addition of refiner with the monitoring of these production processes

Análise das microdeformações geradas ao redor de implantes de hexágono externo sob a aplicação de cargas verticais em pilares microunit retos e angulados

Pós-graduação em Odontologia Restauradora - ICT

Avaliação in vitro das microdeformações em implantes curtos, com conexão protética cone morse e diferentes desenhos de roscas, convencionais e platôs

Pós-graduação em Odontologia Restauradora - ICT

Nova configuração de um reator compartimentado anaeróbio/aeróbio para o tratamento de esgoto sanitário de baixa carga

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Trabalhador hóspede, acumulação flexivel e racismo: notas sobre o trabalho do migrante nos Estados Unidos no século XXI

This article aims to highlight some of the major influences on union structure and the work that emerged in the wake of productive restructuring and globalization of production. The possibility of outsourcing of production and the changes made in its control, more and more glued to the movements of high finance, opened spaces for the dispersion of production. In this international movement, immigrants are unprotected and subject to the conditions of a transnational market work. We describe the case of the United States, where resistance movement has been started.

Parâmetros indicativos para qualidade da água em nascentes com diferentes coberturas de terra e conservação da vegetação ciliar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Regeneração natural do componente arbóreo após a mortalidade de um maciço de taquara em um fragmento de floresta ombrófila mista em Lages - SC

The present study aimed to analyze the floristic and structural descriptors of tree species natural regeneration in a forest sector with synchronized bamboo (Merostachys multiramea Hackel) die-off (CT) and an adjacent area with continuous canopy cover (ST) in an araucaria forest fragment in the municipality of Lages, Santa Catarina state. A total of 14, 5x5m, plots (six plots in CT sector and eight in ST sector) were allocated, where all tree species regenerative individual with circumference at breast height smaller than 15cm and height higher than 25cm was measured (diameter at soil level) and identified. The richest families were: Myrtaceae (nine), Solanaceae (six) and Aquifoliaceae (four). The Shannon Diversity Index in ST and CT sectors were respectively 2.73 and 2.31. The species with the highest importance values in CT sector were Solanum variabile, Piptocarpha angustifolia, Mimosa scabrella, Jacaranda puberula and Solanum pseudoquina. In ST sector, the species with highest importance values were Myrsine lorentziana, Casearia decandra, Cinnamodendron dinisii, Drimys brasiliensis and Ilex paraguariensis. The results showed that the synchronized bamboo die-off influenced the spatial variation in the floristic and structural descriptors of the tree species natural regeneration.

Community-wide spatial and temporal discordances of seed-seedling shadows in a tropical rainforest

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)