Experimental study on polyester based concretes filled with glass fibre reinforced plastic recyclates – a contribution to composite materials sustainability

The development and applications of thermoset polymeric composites, namely fibre reinforced plastics (FRP), have shifted in the last decades more and more into the mass market [1]. Despite of all advantages associated to FRP based products, the increasing production and consume also lead to an increasing amount of FRP wastes, either end-of-lifecycle products, or scrap and by-products generated by the manufacturing process itself. Whereas thermoplastic FRPs can be easily recycled, by remelting and remoulding, recyclability of thermosetting FRPs constitutes a more difficult task due to cross-linked nature of resin matrix. To date, most of the thermoset based FRP waste is being incinerated or landfilled, leading to negative environmental impacts and supplementary added costs to FRP producers and suppliers. This actual framework is putting increasing pressure on the industry to address the options available for FRP waste management, being an important driver for applied research undertaken cost efficient recycling methods. [1-2]. In spite of this, research on recycling solutions for thermoset composites is still at an elementary stage. Thermal and/or chemical recycling processes, with partial fibre recovering, have been investigated mostly for carbon fibre reinforced plastics (CFRP) due to inherent value of carbon fibre reinforcement; whereas for glass fibre reinforced plastics (GFRP), mechanical recycling, by means of milling and grinding processes, has been considered a more viable recycling method [1-2]. Though, at the moment, few solutions in the reuse of mechanically-recycled GFRP composites into valueadded products are being explored. Aiming filling this gap, in this study, a new waste management solution for thermoset GFRP based products was assessed. The mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the potential added value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. The use of a cementless concrete as host material for GFRP recyclates, instead of a conventional Portland cement based concrete, presents an important asset in avoiding the eventual incompatibility problems arisen from alkalis silica reaction between glass fibres and cementious binder matrix. Additionally, due to hermetic nature of resin binder, polymer based concretes present greater ability for incorporating recycled waste products [3]. Under this scope, different GFRP waste admixed polymer mortar (PM) formulations were analyzed varying the size grading and content of GFRP powder and fibre mix waste. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacities of modified mortars with regard to waste-free polymer mortars.

Occupational risk in a glass manufacturing industry unit

Risk assessment is one of the main pillars of the framework directive and other directives in respect of health and safety. It is also the basis of an effective management of safety and health as it is essential to reduce work-related accidents and occupational diseases. To survey the hazards eventually present in the workplaces the usual procedures are i) gathering information about tasks/activities, employees, equipment, legislation and standards; ii) observation of the tasks and; iii) quantification of respective risks through the most adequate risk assessment among the methodologies available. From this preliminary evaluation of a welding plant and, from the different measurable parameters, noise was considered the most critical. This paper focus not only the usual way of risk assessment for noise but also another approach that may allow us to identify the technique with which a weld is being performed.

Miocene c4tfishes (Ariidae, Bagridae) from Lisbon: a Nilotic (or Sudanian) type fauna

Miocene catfishes from Lisbon are dealt with. Two distinct sets of pectoral and dorsal pterygiophores are described. That from the Langhian V-b is referred to Arius sp. probably close to A. Beudeloti. Another set from the uppermost Burdigalian V-a may be ascribed to a bagtid, cf, Chrysichthys sp., identified for the first time in this region. The catfish and Lates association is strikingly similar to African, nilotic or sudanian ones as far as freshwaters are concerned. In marine, coastal environments, stenotherm warm-water forms (Polynemids, large barracudas and several sharks) indicate, as a model, faunas like those from Cape Verde to northern Angola. There is some gradation for brackish waters (fig. 1). Catfishes and Lates probably migrated into the Iberian Peninsule in the lower Miocene. They are unknown after Langhian V-b except for a reappearance of Arius in the middle Tortonian VII-b. Decreasing temperatures and aridity account for local extinction at least in freshwaters. Expansion of these fishes have been made easier owing to the displacement of land masses that narrowed or closed the marine waterway between Europe and Africa. Salinity tolerance is not necessarily the sole explanation for migration. Catfishes plus Lates associations colonized inland waters from both sides of the Paleomediterranean. Local extinction may have weighed more in the development of modern distribution patterns than migration.

A case study undertaken recycling & reuse of glass fiber reinforced thermoset polumer wastes of composite materials industry

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: crosslinked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

Task assignment algorithms for two-type heterogeneous multiprocessors

Consider the problem of assigning implicit-deadline sporadic tasks on a heterogeneous multiprocessor platform comprising two different types of processors—such a platform is referred to as two-type platform. We present two low degree polynomial time-complexity algorithms, SA and SA-P, each providing the following guarantee. For a given two-type platform and a task set, if there exists a task assignment such that tasks can be scheduled to meet deadlines by allowing them to migrate only between processors of the same type (intra-migrative), then (i) using SA, it is guaranteed to find such an assignment where the same restriction on task migration applies but given a platform in which processors are 1+α/2 times faster and (ii) SA-P succeeds in finding a task assignment where tasks are not allowed to migrate between processors (non-migrative) but given a platform in which processors are 1+α times faster. The parameter 0<α≤1 is a property of the task set; it is the maximum of all the task utilizations that are no greater than 1. We evaluate average-case performance of both the algorithms by generating task sets randomly and measuring how much faster processors the algorithms need (which is upper bounded by 1+α/2 for SA and 1+α for SA-P) in order to output a feasible task assignment (intra-migrative for SA and non-migrative for SA-P). In our evaluations, for the vast majority of task sets, these algorithms require significantly smaller processor speedup than indicated by their theoretical bounds. Finally, we consider a special case where no task utilization in the given task set can exceed one and for this case, we (re-)prove the performance guarantees of SA and SA-P. We show, for both of the algorithms, that changing the adversary from intra-migrative to a more powerful one, namely fully-migrative, in which tasks can migrate between processors of any type, does not deteriorate the performance guarantees. For this special case, we compare the average-case performance of SA-P and a state-of-the-art algorithm by generating task sets randomly. In our evaluations, SA-P outperforms the state-of-the-art by requiring much smaller processor speedup and by running orders of magnitude faster.

Provably Good Task Assignment for Two-Type Heterogeneous Multiprocessors Using Cutting Planes

Consider scheduling of real-time tasks on a multiprocessor where migration is forbidden. Specifically, consider the problem of determining a task-to-processor assignment for a given collection of implicit-deadline sporadic tasks upon a multiprocessor platform in which there are two distinct types of processors. For this problem, we propose a new algorithm, LPC (task assignment based on solving a Linear Program with Cutting planes). The algorithm offers the following guarantee: for a given task set and a platform, if there exists a feasible task-to-processor assignment, then LPC succeeds in finding such a feasible task-to-processor assignment as well but on a platform in which each processor is 1.5 × faster and has three additional processors. For systems with a large number of processors, LPC has a better approximation ratio than state-of-the-art algorithms. To the best of our knowledge, this is the first work that develops a provably good real-time task assignment algorithm using cutting planes.

Herpes simplex virus type 2 infection in pregnancy: asymptomatic viral excretion at delivery and seroepidemiologic survey of two socioeconomically distinct populations in São Paulo, Brazil

The objective of the present study was to estimate the prevalence of herpes simplex virus type 2 (HSV 2) antibodies in child bearing women of 2 Brazilian populations with different socioeconomic status and to determine the risk of neonatal HSV exposure by means of maternal cultures at the onset of labor. The study was conducted at 2 hospitals: A, serving very low income patients and B, serving middle socioeconomic class. 173 participants from group A and 127 from B answered a questionnaire which showed that the patients had similar ages (27.7 and 26.8 years, respectively) but differed with regard to socioeconomic status, age at first intercourse (18.6 vs 20.6 years), number of sex partners (1.5 vs 1.2) and previous sexually transmitted diseases (15% vs. 1.5%). History of genital herpes was given by 11% of group A participants and by a similar number, 7%, of patients from group B. In addition, 200 serum samples from population A and 455 from B were tested by ELISA for and HSV antibodies and 92% and 86%, respectively, were found to be positive. Sixty seropositive samples from group A and 90 from B were further analyzed by Western blot, which showed the presence of type 2 specific antibodies in 46% and 36%, respectively, suggesting an overall HSV 2 prevalence of 42% in group A and 31% in B. Cervical specimens were obtained for culture from 299 asymptomatic patients of population A and 313 of B. HSV was isolated from one specimen in each group, indicating a 0.3% incidence of asymptomatic viral excretion in both populations. In conclusion, the prevalence of type 2 antibodies in childbearing women was very high, but it did not differ with the socioeconomic status. The risk of HSV perinatal transmission was also similar in the 2 study populations and it was comparable with the data from developed countries. Our findings do not indicate the need of special screening programs for asymptomatic HSV excretion in Brazilian pregnant women.

Soliton-type and other travelling wave solutions for an improved class of nonlinear sixth-order Boussinesq equations

An improved class of nonlinear bidirectional Boussinesq equations of sixth order using a wave surface elevation formulation is derived. Exact travelling wave solutions for the proposed class of nonlinear evolution equations are deduced. A new exact travelling wave solution is found which is the uniform limit of a geometric series. The ratio of this series is proportional to a classical soliton-type solution of the form of the square of a hyperbolic secant function. This happens for some values of the wave propagation velocity. However, there are other values of this velocity which display this new type of soliton, but the classical soliton structure vanishes in some regions of the domain. Exact solutions of the form of the square of the classical soliton are also deduced. In some cases, we find that the ratio between the amplitude of this wave and the amplitude of the classical soliton is equal to 35/36. It is shown that different families of travelling wave solutions are associated with different values of the parameters introduced in the improved equations.

Chemical analysis of 17th century Millefiori glasses excavated in the Monastery of Sta. Clara‐a‐Velha: comparison with Venetian and façon‐de‐Venise production

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Conservação e Restauro,Área de especialização Cerâmica e Vidro

Glass in Cultural Heritage – An Introduction

Proceedings of the Chemistry and Conservation Science

Real fábrica de vidros de Coina – Chemical analysis of archaeological glass fragments

Actas do 17º Congresso da Associação Internacional para a História do Vidro

Dengue type 2 outbreak in the south of the State of Bahia, Brazil: laboratorial and epidemiological studies

During March 1994 cases of a exanthematic acute disease were reported in the municipalities of Itagemirim, Eunápolis and Belmonte, state of Bahia. Dengue fever was confirmed by serology (MAC-ELISA) and by dengue virus type 2 isolation, genotype Jamaica. Signs and symptoms of classic dengue fever were observed with a high percentual of rash (73.8%) and pruritus (50.5%). Major haemorrhagic manifestations were unfrequent and only bleeding gum was reported. Dengue virus activity spreaded rapidly to important tourism counties like Porto Seguro, Ilhéus, Santa Cruz de Cabrália, Prado, Alcobaça and others, representing a risk for the spreading of dengue virus into the country and abroad.

Histopathology and immunocytochemical study of type 3 and type 4 complement receptors in the liver and spleen of dogs naturally and experimentally infected with Leishmania (Leishmania) chagasi

The objective of this study was to compare the histopathological changes and expression of CR3 and CR4 in the liver and spleen of dogs naturally and experimentally infected with L. chagasi. The basic histopathological lesions observed mainly in naturally infected dogs were: epithelioid hepatic granulomas, hyperplasia and hypertrophy of Kupffer cells, Malpigui follicles and mononucleated cells of the red pulp of the spleen. Sections from the liver and spleen by immunocytochemistry technique showed the presence of CD11b,c\CD 18 antigens in the control and infected animals and no qualitative or quantitative differences in the liver. Nevertheless, CD18 was always increased in the spleen of naturally and experimentally infected dogs. These results indicate that there is a difference in the activaton of CD 18 in both experimental and natural cases of canine visceral leishmaniasis that should play an important role in the immunological response to Leishmania chagasi infection.

Progression of Salmonella Enteritidis phage type 4 strains in São Paulo State, Brazil

A total of 574 S. Enteritidis strains (383 from human sources and 191 from non-human sources) isolated between 1975-95, in São Paulo State, Brazil, were phagetyped. Among the strains isolated during the period of 1975-92, 80.9% of them belonged to phage type 8 (PT-8), but in 1993 strains of PT-4 accounted for 65.2% of all the S. Enteritidis isolates. In the following years, PT-4 strains accounted for 99.7% and 98.4% of phagetyped S. Enteritidis strains. The results obtained suggested that the current epidemic of S. Enteritidis in São Paulo State is clearly associated with the progression of PT-4 strains.

Sequencing cutting patterns with colored interval graphs

The problem addressed here originates in the industry of flat glass cutting and wood panel sawing, where smaller items are cut from larger items accordingly to predefined cutting patterns. In this type of industry the smaller pieces that are cut from the patterns are piled around the machine in stacks according to the size of the pieces, which are moved to the warehouse only when all items of the same size have been cut. If the cutting machine can process only one pattern at a time, and the workspace is limited, it is desirable to set the sequence in which the cutting patterns are processed in a way to minimize the maximum number of open stacks around the machine. This problem is known in literature as the minimization of open stacks (MOSP). To find the best sequence of the cutting patterns, we propose an integer programming model, based on interval graphs, that searches for an appropriate edge completion of the given graph of the problem, while defining a suitable coloring of its vertices.