Effect of blade tip geometry on the tip leakage flow in axial turbine cascades

The phenomenon of tip leakage has been studied in two linear cascades of turbine blades. The investigation includes an examination of the performance of the cascades with a variety of tip geometries. The effects of using plain tips, suction side squealers, and pressure side squealers are reported. Traverses of the exit flow field were made in order to determine the overall performance. A method of calculating the tip discharge coefficients for squealer geometries is put forward. In linking the tip discharge coefficient and cascade losses, a procedure for predicting the relative performance of tip geometries is developed. The model is used to examine the results obtained using the different tip treatments and to highlight the important aspects of the loss generation process.

Three-dimensional interactions in the rotor of an axial turbine

This article presents a study of the development of the three-dimensional flowfield within the rotor blades of a low-speed, large-scale axial flow turbine. Measurements have been performed in the rotating and stationary frames of reference. Time-mean data have been obtained using miniature five-hole pneumatic probes, whereas the unsteady development of the flow has been determined using three-axis subminiature hot-wire anemometers. Additional information is provided by the results of blade-surface flow-visualization experiments and surface-mounted hot-film anemometers. The development of the stator exit flow, as it passes through the rotor blades, is described. Unsteady data suggest that the presence of the rotor secondary and tip leakage flows restricts the region of unsteady interaction to near midspan when the stator wakes and secondary flows are adjacent to the suction surface. Surface-mounted hot-film data show that this affects the suction-side laminar-turbulent transition process.

The morphometrics and the proximate composition of the edible fresh water mussel Lamellidens lamellatus (Lea) from Bathalagoda tank, a man made reservoir in Sri Lanka

Morphometric characteristics of Lamellidens lamellatus were studied using a random sample of 138 individuals collected from Bathalagoda reservoir in Kurunegala district. The largest number of individuals in the collection was between 40-50 mm in length. They had a body weight between 60-80 gm. The most abundant bio-chemical component in the adductor and in the foot was protein. Carbohydrate and lipid quantities were almost equal while ash showed the least value. The total protein content ranged from 48.8% to 73.4%; the carbohydrate content from 12.64% to 23.8%; and lipid content from 12.0% to 28.1% of their dry weight. It was found that there were significant relationships between the length and the body weight; and between length and volume.

Natural versus artificial scene classification by ordering discrete fourier power spectra

Holistic representations of natural scenes is an effective and powerful source of information for semantic classification and analysis of arbitrary images. Recently, the frequency domain has been successfully exploited to holistically encode the content of natural scenes in order to obtain a robust representation for scene classification. In this paper, we present a new approach to naturalness classification of scenes using frequency domain. The proposed method is based on the ordering of the Discrete Fourier Power Spectra. Features extracted from this ordering are shown sufficient to build a robust holistic representation for Natural vs. Artificial scene classification. Experiments show that the proposed frequency domain method matches the accuracy of other state-of-the-art solutions. © 2008 Springer Berlin Heidelberg.

A mixed culture trail of mud crab (Scylla serrata Forskal) with tilapia ( Oreocromis niloticus L.)

A ten-month study on mixed culture of mud crab Scylla serrata with tilapia (Oreochromis niloticus) was performed in brackish water earthen ponds using live tilapia fry as the only feed for crab. The monthly growth rate varied from 9.07-19.llg among four treatments. Treatment T 1, cw: 0.68cm (±0.72) and bw: 19.11 gm (±12.97) showed highest performance which was followed by T 3, cw: 0.62cm (±0.60) and bw: 13.42 gm (±10.51), T4, cw: 0.65cm (±0.64) and bw: 13.20 gm (±9.89) and T2, cw: 0.36cm (± 0.25) and bw: 9.07 gm (±8.05). Highest survivability of crabs was also recorded in T 1 (21.5%) which was followed by T 2 (15.65%), T4 (14.95%) and T 3 (14.15%). In terms of survivability, significant differences (p<0.05) were observed among the treatments whereas these were recorded as insignificant difference (p<0.05) in final weight, weight gain and production of crabs and tilapia. Mixed culture of mud crab with tilapia could make more rewarding than crab monoculture but the study suggests that only tilapia fry can not fulfill the feed requirement of crabs in respects of survivability, final body weight and weight gain. Besides, existed salinity level of 4-12 ppt during experimental period might be the another key factor for low survivability and weight gain.

Retaining axial-lateral orthogonality in steered ultrasound data to improve image quality in reconstructed lateral displacement data

Ultrasound elastography tracks tissue displacements under small levels of compression to obtain images of strain, a mechanical property useful in the detection and characterization of pathology. Due to the nature of ultrasound beamforming, only tissue displacements in the direction of beam propagation, referred to as 'axial', are measured to high quality, although an ability to measure other components of tissue displacement is desired to more fully characterize the mechanical behavior of tissue. Previous studies have used multiple one-dimensional (1D) angled axial displacements tracked from steered ultrasound beams to reconstruct improved quality trans-axial displacements within the scan plane ('lateral'). We show that two-dimensional (2D) displacement tracking is not possible with unmodified electronically-steered ultrasound data, and present a method of reshaping frames of steered ultrasound data to retain axial-lateral orthogonality, which permits 2D displacement tracking. Simulated and experimental ultrasound data are used to compare changes in image quality of lateral displacements reconstructed using 1D and 2D tracked steered axial and steered lateral data. Reconstructed lateral displacement image quality generally improves with the use of 2D displacement tracking at each steering angle, relative to axial tracking alone, particularly at high levels of compression. Due to the influence of tracking noise, unsteered lateral displacements exhibit greater accuracy than axial-based reconstructions at high levels of applied strain. © 2011 SPIE.

Development of intermediate moisture marinated fish product and its storage characteristics

An attempt was made to prepare an intermediate moisture (around 44% moisture) marinated (pH around 4) fish product. Fillets from Sciaenid fish (each fish weighing 70-80 gm) were dipped in a solution containing 7% acetic acid, 20% common salt and 1% propionic acid for 2 hours. After soaking, the soaked fillets were partially dried to about 44% moisture. Three effective hurdles like low pH (by using 7% acetic add and 1% propionic acid), low water activity (by using 20% salt and partially drying the fillets) and preservative (1% propionic add), were used to prepare a shelf-stable product at room temperature. The dried product was sprayed with 0.0 5% BHA in 50% alcohol and further dried for 10 minutes to remove added water and alcohol, thereby another hurdle (preservative) against fat oxidation. The product was packed in 300 gauge polythene bags and stored in transparent screw cap plastic jars. Fortnightly samples were drawn and subjected to biochemical, bacteriological and organoleptic evaluation to study its storage characteristics. The product was in good acceptable form up to 4 months at ambient temperature. The product needed one hour soaking in water with two changes of water in between to make it free from excess salt and acid smell.

Deposition and characterisation of ultralow-stress ZnO thin films for application in FBAR-based gravimetric biosensors

Zinc oxide (ZnO) thin films were deposited at high rates ( > 50 nm min-1) using a unique technique known as high target utilisation sputtering (HiTUS). The films obtained possess good crystallographic orientation, low surface roughness, very low stress and excellent piezoelectric properties. We have utilised the films to develop highly sensitive biosensors based on thickness longitudinal mode (TLM) thin film bulk acoustic resonators (FBARs). The FBARs have the fundamental TLM at a frequency near 1.5 GHz and quality factor Q higher than 1,000, which is one of the largest values ever reported for ZnO-based FBARs. Bovine Serum Albumin (BSA) solutions with different concentrations were placed on the top of different sets of identical FBARs and their responses to mass-loading from physically adsorbed protein coatings were investigated. These resonators demonstrated a high sensitivity and thus have a great potential as gravimetric sensors for biomedical applications. © 2011 Inderscience Enterprises Ltd.

Morphometric measurements as an index for estimating yield of meat of shell fishes, 1. Crab (Scylla serrata) Forskal

Sixty one observations on length-breadth and whole weight-meat weight relations of India crab (Scylla serrata) were made. From the length of crab (cm) the whole weight (gm) can be computed by the equation: log W=-0.1708+2.3341 log L. Similarly for any given length (cm) the meat weight (gm) can be found by the relation, log w=-1.5745+3.0148 log L.

Phenotype and Function of Monocyte-Derived Dendritic Cells from Chinese Rhesus Macaques

Dendritic cells (DCs) play a pivotal role in linking the innate immunity and acquired immunity in responses to pathogen. Non-human primates such as Chinese Rhesus Macaque (CRM) are the favorable models for preclinical study of potential therapeutic drugs,