969 resultados para Funchal (ilha da Madeira)


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Estudaram-se os resultados obtidos no exame clínico da glândula mamária de 3.191 vacas mestiças e no "California Mastitis Test" (CMT) em 12.764 amostras de leite colhidas destes animais, relacionando-os com o estádio de lactação, o número de partos e a localização das afecções. O exame clínico revelou que 50 quartos apresentavam mastite e 231 mostravam-se atrofiados ou afuncionais. A aplicação do CMT indicou alterações de secreção em 1.741 quartos. A localização das afecções nos quartos foi estatisticamente semelhante, o mesmo ocorrendo com a incidência de mastite clínica com relação ao estádio de lactação. Quanto ao número de partos, não houve diferença significativa em relação à incidência de mastite clínica, porém a ocorrência de casos subclínicos foi estatisticamente superior em animais de uma a seis crias. O percentual de quartos afuncionais foi significativamente maior nos animais, acima de quatro partos.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aims to analyse the faunistic composition of ''Ilha Comprida, SP, Brasil, in relation to semiterrestrial crabs. The collects were done during one year. The animals were handy sampled, and the colleting area comprised from Cananeia proximities to Icapara bar, towards north, including beaches, sand banks and mangroves. After each sample the animals were identified. The results obtained were similar those presented for other estuarine regions in São Paulo north coast. With reference to the species from Parana coast, we have got 2 species more. The crabs recorded are distributed in 3 Decapod families: Grapsidae, Ocypodidae and Xanthidae.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Kinetics of the removal of Eucalyptus grandis wood extractives during Kraft pulping. The objective of this work was to study the kinetics of the removal of Eucalyptus grandis wood extractives during Kraft pulping. The pulping was done in steel tubular reactors using wood saw under the following conditions: active alkali = 14%, sulfidity = 25%; liquor-to-wood ratio = 10 L kg(-1) of dry wood; and temperatures of 130, 150, 160 and 180 C during 30, 60, 90, 120, 150 and 180 minutes. After pulping, analyses were conducted of the yield and extractives in residue (pulp and reject). Total extractives (ethyl alcohol-toluene (1:2), ethyl alcohol and hot water, respectively) and soluble extractives in acetone were analyzed. The results showed that most extractives are degraded in the first 30 minutes of the pulping process. It was observed that the removal occurs in two different stages: the first is rapid, where the majority of the extractives are removed, and the last is slow, where few extractives are removed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

It were analyzed Eucalyptus grandis trees of 8 years old in the forest group of Duraflora S/A, with different annual increments based on volume, to the related studies of specific gravity values based on productivity indexes. The methodology used in analysis of specific gravity was the gamma-ray attenuation technique of Americium-241. The Eucalyptus grandis showed a specific gravity decreasing with the increasing of parcel productivity. For a gain of 3,5 m3 in productivity there was a decreasing of 1% in specific gravity. Nevertheless, it was not observed correlation between specific gravity and basal area in a same parcel. The present work stands out too, some of the difficulties found with relation to wood specific gravity determinations and emphasize the importance of take samples in the form of full rounded plates in three or four relative positions in the tree.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This investigation was carried out at the Madeira River basin, located in the state of Rondônia, Brazilian Amazon. Sediments from Madeira River between Teotônio and Santo Antônio waterfalls along 25 km upstream from Porto Velho, the capital of Rondônia state, and from nine lakes located around Porto Velho municipality were chemically analyzed for Se (IV) in order to evaluate the main factors affecting the Se(IV) distribution in the environment, Selenite ion was chosen to investigate the selenium behavior in the area, because acid conditions are dominant there. The importance of clays, iron oxides, organic matter and minor refractory minerals was considered in order to explain most of the obtained data.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This paper had the objective of studying variability of radial, tangential, longitudinal and volumetric shrinkage between the juvenile and mature wood, from a 35 year-old Pinus taeda L., from Horto Florestal of Manduri at São Paulo State, Brazil. First of all the experimental program determinations were related to the juvenile wood, region of the transition and region of the mature wood, using anatomical analysis (length of the axial tracheids), according to ABNT and IAWA codes. Results had shown that the area of juvenile wood of this species occurs approximately until the 20th growth ring, being more representative until the 12th ring. The transition area of this wood occurs between the 12th and 20th growth ring. In the second part of the work the shrinkage of the juvenile and mature wood were evaluated. Values of the radial, tangential and volumetric shrinkage were smaller and more variable on the juvenile wood. The longitudinal shrinkage did not present significant differences between the two wood types; medium values were slightly inferior and very variable on juvenile wood related to mature wood.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

It had been studied the dimensional variations Pinus caribæa var. hondurensis and Eucalyptus grandiswood, emphasizing the axial, radial, tangential and volumetric shrinkage. The results had shown that the volumetric shrinkage of Pinus and Eucalyptus varied according to an exponential curve, R V=R Vmaxe -ku. The total or maximum volumetric shrinkage showed a linear behavior with the specific gravity on basis of ovendry mass and volume and the same behavior as respect of the specific gravity, where the adjusted equations were, respectively: R vmax = 3,01 + 19,15,oo e R vmax = 1,96 + 24,28,ob. It was also verified that the tangential shrinkage was 1,3 times greater than the radial one and 9,0 times greater than the axial one.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The juvenile wood has peculiar characteristics from the anatomical structure and physical-mechanical properties, considering these aspects the knowledge of the wood is essential for wood adequate utilization. The aim of this work was to determinate the zone of juvenile wood of pith-bark direction in Eucalyptus citriodora. The juvenile and mature wood zones were determined across fiber length measurement in various height in the tree stem. Results showed that juvenile wood zone occurs approximately up to the 45 at 55 mm from the pith.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The activities and management operations of wood harvesting do not have good computational tools available to help the forest technicians with the task of cost reduction. In many cases, machines of high investment are used in wood harvesting without adequate operation planning; consequently, the cost per hour of these machines, which is high, could be reduced. Using technological resources such as the Geographic Information Systems (GIS) integrated with the Global Positioning System (GPS), which are the basis of precision harvesting. In this research, a technological tool capable of calculating and optimizing the average skidding distance of the forwarder was developed. It was used in stands of different sizes and formats through mathematical techniques and available functionalities in the Geographic Information System GRASS. The developed tool, called optimized model, divides the stand in small parts in relation to shorter skidding distances. The main variable considered was the alignment of plantation. The model was tested in eucalypt stands located in the State of São Paulo. Sixteen stands were randomly selected: eight with a rectangular polygon form, and eight with irregular polygon form. The main variables were collected in these stands. Results showed that the optimized model developed, is efficient and flexible. It was possible to divide the stands in small parts resulting in smaller skidding medium distances. The stands with irregular form had shorter skidding medium distances than the rectangular stands.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conectivity between the hydrologic regimen and the distribution of the vegetation there is already a lot is recognized by several researchers in the works of fluvial ecology. It can be affirmed that the geomorphology of the alluvial plain has an important paper in the constitution of the riparian vegetation. On the proposed study, traverse topographical profiles were elaborated in the island, recognition of the distribution of the vegetation and the zoning geomorphologic presented in profiles for the Mutum Island. It's located in the upper course of the Parana River, between the mouth of the Paranapanema River and the mouth of the Ivinhema River. It elapses of this study the succession of the strata of the riparian vegetation and the relationship with the morphology of the surface, in this case the relief as the main controller abiotic and selective of the species in the environmental. For the whole island it was possible to define three classes: Mutum Upper Unit, Mutum Lower Unit and Paleochannel. The presented discussion is resulted partial of the project called Processes of Conectivity and the Riparian Vegetacion in the high course of the Parana River, PR/MS.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The incentive for consumption and production in large quantity in modern society generates enormous amounts of urban solid residues in the form of municipal solid waste (MSW). With the intention of reducing these residues of the municipal waste tips and to generate energy, briquettes with mixtures of MSW and residues of Eucalyptus grandis were produced. The briquettes were manufactured with 0, 5, 10, 15, 20 and 25% of MSW in the mixture with wood waste and 12% of moisture content. The analyzed parameters used to choose the best treatments were combustion analysis versus ash content, mechanical strength and energy content. The briquettes up to 10% of MSW showed low resistance, and above 15% showed large increase in ash content. Therefore, the treatment that fulfilled the requirements for combustion versus ash content and mechanical resistance was of at least 15% of MSW, since the source of the ash is unidentified. Considering the net energy content, the best treatment was 25% of MSW, with 17,175 kJ kg-1. Nevertheless, it is strongly advised that further studies related to gas emissions are necessary.