Development of a Model for the Ice Scraping Process, October 1996

A laboratory study has been conducted with two aims in mind. The first goal was to develop a description of how a cutting edge scrapes ice from the road surface. The second goal was to investigate the extent, if any, to which serrated blades were better than un-serrated or "classical" blades at ice removal. The tests were conducted in the Ice Research Laboratory at the Iowa Institute of Hydraulic Research of the University of Iowa. A specialized testing machine, with a hydraulic ram capable of attaining scraping velocities of up to 30 m.p.h. was used in the testing. In order to determine the ice scraping process, the effects of scraping velocity, ice thickness, and blade geometry on the ice scraping forces were determined. Higher ice thickness lead to greater ice chipping (as opposed to pulverization at lower thicknesses) and thus lower loads. Behavior was observed at higher velocities. The study of blade geometry included the effect of rake angle, clearance angle, and flat width. The latter were found to be particularly important in developing a clear picture of the scraping process. As clearance angle decreases and flat width increases, the scraping loads show a marked increase, due to the need to re-compress pulverized ice fragments. The effect of serrations was to decrease the scraping forces. However, for the coarsest serrated blades (with the widest teeth and gaps) the quantity of ice removed was significantly less than for a classical blade. Finer serrations appear to be able to match the ice removal of classical blades at lower scraping loads. Thus, one of the recommendations of this study is to examine the use of serrated blades in the field. Preliminary work (by Nixon and Potter, 1996) suggests such work will be fruitful. A second and perhaps more challenging result of the study is that chipping of ice is more preferable to pulverization of the ice. How such chipping can be forced to occur is at present an open question.

Dynamics of domain walls in pattern formation under traveling-wave forcing

We study dynamics of domain walls in pattern forming systems that are externally forced by a moving space-periodic modulation close to 2:1 spatial resonance. The motion of the forcing induces nongradient dynamics, while the wave number mismatch breaks explicitly the chiral symmetry of the domain walls. The combination of both effects yields an imperfect nonequilibrium Ising-Bloch bifurcation, where all kinks (including the Ising-like one) drift. Kink velocities and interactions are studied within the generic amplitude equation. For nonzero mismatch, a transition to traveling bound kink-antikink pairs and chaotic wave trains occurs.

Dynamical scaling of imbibition in columnar geometries

compatible with the usual nonlocal model governed by surface tension that results from a macroscopic description. To explore this discrepancy, we exhaustively analyze numerical integrations of a phase-field model with dichotomic columnar disorder. We find that two distinct behaviors are possible depending on the capillary contrast between the two values of disorder. In a high-contrast case, where interface evolution is mainly dominated by the disorder, an inherent anomalous scaling is always observed. Moreover, in agreement with experimental work, the interface motion has to be described through a local model. On the other hand, in a lower-contrast case, the interface is dominated by interfacial tension and can be well modeled by a nonlocal model. We have studied both spontaneous and forced-flow imbibition situations, giving a complete set of scaling exponents in each case, as well as a comparison to the experimental results.

Three-dimensional aspects of fluid flows in channels. I. Meniscus and thin film regimes

We study the forced displacement of a fluid-fluid interface in a three-dimensional channel formed by two parallel solid plates. Using a lattice-Boltzmann method, we study situations in which a slip velocity arises from diffusion effects near the contact line. The difference between the slip and channel velocities determines whether the interface advances as a meniscus or a thin film of fluid is left adhered to the plates. We find that this effect is controlled by the capillary and Péclet numbers. We estimate the crossover from a meniscus to a thin film and find good agreement with numerical results. The penetration regime is examined in the steady state. We find that the occupation fraction of the advancing finger relative to the channel thickness is controlled by the capillary number and the viscosity contrast between the fluids. For high viscosity contrast, lattice-Boltzmann results agree with previous results. For zero viscosity contrast, we observe remarkably narrow fingers. The shape of the finger is found to be universal.

Dynamics of driven three-dimensional thin films: from hdrophilic to superhydrophobic substrates

We study the forced displacement of a thin film of fluid in contact with vertical and inclined substrates of different wetting properties, that range from hydrophilic to hydrophobic, using the lattice-Boltzmann method. We study the stability and pattern formation of the contact line in the hydrophilic and superhydrophobic regimes, which correspond to wedge-shaped and nose-shaped fronts, respectively. We find that contact lines are considerably more stable for hydrophilic substrates and small inclination angles. The qualitative behavior of the front in the linear regime remains independent of the wetting properties of the substrate as a single dispersion relation describes the stability of both wedges and noses. Nonlinear patterns show a clear dependence on wetting properties and substrate inclination angle. The effect is quantified in terms of the pattern growth rate, which vanishes for the sawtooth pattern and is finite for the finger pattern. Sawtooth shaped patterns are observed for hydrophilic substrates and low inclination angles, while finger-shaped patterns arise for hydrophobic substrates and large inclination angles. Finger dynamics show a transient in which neighboring fingers interact, followed by a steady state where each finger grows independently.

The impact of triathlon training and racing on athletes' general health.

Although the sport of triathlon provides an opportunity to research the effect of multi-disciplinary exercise on health across the lifespan, much remains to be done. The literature has failed to consistently or adequately report subject age group, sex, ability level, and/or event-distance specialization. The demands of training and racing are relatively unquantified. Multiple definitions and reporting methods for injury and illness have been implemented. In general, risk factors for maladaptation have not been well-described. The data thus far collected indicate that the sport of triathlon is relatively safe for the well-prepared, well-supplied athlete. Most injuries 'causing cessation or reduction of training or seeking of medical aid' are not serious. However, as the extent to which they recur may be high and is undocumented, injury outcome is unclear. The sudden death rate for competition is 1.5 (0.9-2.5) [mostly swim-related] occurrences for every 100,000 participations. The sudden death rate is unknown for training, although stroke risk may be increased, in the long-term, in genetically susceptible athletes. During heavy training and up to 5 days post-competition, host protection against pathogens may also be compromised. The incidence of illness seems low, but its outcome is unclear. More prospective investigation of the immunological, oxidative stress-related and cardiovascular effects of triathlon training and competition is warranted. Training diaries may prove to be a promising method of monitoring negative adaptation and its potential risk factors. More longitudinal, medical-tent-based studies of the aetiology and treatment demands of race-related injury and illness are needed.

Accumulation of phosphorus fractions and contamination potential in vineyard soils in the southern region of the state of Santa Catarina, Brazil

In vineyards, if phosphate is applied both before planting and at intervals during growth without consideration of technical criteria, the soil P fractions may be increased and their proportions altered. This study was carried out to evaluate the accumulation of P fractions and the parameters of the adsorption isotherm in a sandy Typic Hapludalf soil in vineyards with a history of successive and excessive phosphate fertilization. In December 2010, two vineyards were selected, one 4 and the other 15 years old, in Urussanga, State of Santa Catarina (Brazil). Three trenches were dug in each area and soil was collected from the 0-5, 5-10 and 10-20 cm depth ranges. The soil samples were dried in a forced-air oven, sieved and subjected to chemical analyses, P chemical fractionation and P adsorption isotherms. Excessive phosphate fertilization, before and during cultivation, particularly in the older vineyard and, consequently, with a longer history of phosphate fertilization, increased the inorganic P concentrations to the depth of 20 cm, especially in labile fractions extracted by anion exchange resin and NaHCO3 in the non-labile fraction, as well as in the non-labile fraction extracted by 1.0 mol L-1 HCl. The application of phosphate fertilizers and the long cultivation period increased the P levels in the organic labile fraction extracted by 0.5 mol L-1 NaHCO3, and especially in the moderately labile fraction extracted by 0.1 and 0.5 mol L-1 NaOH. Phosphate fertilization of older vineyards, i.e., cultivated for 15 years, increased the amounts of P desorbed in water, indicating a risk of contamination of surface waters and groundwater. The phosphate fertilization before planting, without considering the results of soil analysis, and during cultivation, disregarding the results of soil analysis, leaf analysis and expected yield, led to a reduction in the maximum P adsorption capacity in the 0-5 cm layer of vineyard 2, indicating saturation of part of the reactive particle adsorption sites.

Effect of elective antibiotic therapy on resting energy expenditure and inflammation in cystic fibrosis.

Cystic fibrosis (CF) patients often present with malnutrition which may partly be due to increased resting energy expenditure (REE) secondary to inflammation. Both REE and tumour necrosis factor-alpha (TNF-alpha), as other markers of inflammation, are elevated during respiratory exacerbations and decrease after antibiotic treatment. However, the effect of antibiotic therapy on REE and inflammation in patients without respiratory exacerbation is not known. The aim of our study was to determine the effect of such an elective antibiotic therapy on REE, TNF-alpha, and other serum markers of inflammation. Twelve CF patients 5F/7M, age 15.9 +/- 6.1 years, weight for height ratio 89 +/- 8% without clinically obvious exacerbation and treated by intravenous antibiotics were studied. Both before (D0) and after (D14) treatment, pulmonary function tests were performed. REE was measured by indirect calorimetry and blood taken to measure inflammation parameters. Body weight increased by 1.1 kg from D0 to D14 (P < 0.001), composed of 0.3 kg fat mass and 0.8 kg fat-free mass (FFM). The forced expiratory volume at 1 s increased from 43 +/- 15% of predicted at D0 to 51 +/- 15% of predicted at D14 (P < 0.01). Mean REE was 41.1 +/- 7.6 kcal/kg FFM per day at D0 and did not change significantly at D14 (40.6 +/- 8.5 kcal/kg FFM per day). Serum markers of inflammation decreased from D0 to D14: C-reactive protein 17 +/- 17 mg/l to 4 +/- 7 mg/l (P < 0.05), elastase 62 +/- 29 microg/l to 45 +/- 18 microg/l (P < 0.02), orosomucoid acid 1.25 +/- 0.11 g/l to 0.80 +/- 0.15 g/l (P < 0.001), and TNF-alpha 37 +/- 14 pg/ml to 29 +/- 6 pg/ml (P = 0.05). Individual values showed a correlation between changes in REE and in TNF-alpha (P < 0.02). The contribution of inflammation to energy expenditure is possible but appears to be minimal in cystic fibrosis patients treated by antibiotics on a regular basis in the absence of clinically obvious exacerbation.

Role of notch signalling in mammary gland

ÁBSTRACT : Mammary gland is composed of two main epithelial cell types, myoepithelial and luminal. The mechanisms involved in determination and maintenance of them remain poorly understood. Notch signaling is known to regulate cell fate determination in other tissues like skin and nervous system. It was also shown that it can act as tumor suppressor or oncogene depending on the tissue type. The mouse models overexpressing active Notch receptors indicated that Notch signaling is oncogenic in the mammary gland. This observation was followed by some descriptive and functional studies in human breast cancer and it was reported that Notch signaling activity or expression of its components are increased in some of the breast tumor samples compared to normal tissue. However, the physiological role of the Notch signaling and its downstream mechanisms in mammary gland is poorly defined. p63, a member of p53 family, has been implicated in the cell fate determination of keratinocytes. Knockout mouse models revealed that p63 is required for the formation of the mammary anlagen in embryo and its ΔN isoform is expressed exclusively in the myoepithelial layer of the adult breast. In order to understand its function in normal breast epithelial cells, I activated Notch signaling by expression of Notch1 intracellular domain (NICD) in normal primary human breast epithelial cells (HBECs). In this context, NICD reduced growth of HBECs and led to downmodulation of extracellular matrix-receptor interaction network (ECM) components as well as ΔNp63. Expression of ΔNp63 together with NICD partially rescued Notch induced growth reduction, which was correlated with an increase in ECM components. Moreover, silencing ΔNp63 in myoepithelial HBECs reduced growth similar to Notch activation and it led to downregulation of myoepithelial and upregulation of luminal markers. Complementing this observation, forced expression of ONp63 in luminal HBECs induced myoepithelial phenotype and decreased luminal markers. In vivo, by the analysis of a Notch reporter mouse strain, I showed that Notch is activated during puberty specifically at the sites of ductal morphogenesis, terminal end buds. FAGS analysis revealed that it can be detected in two different populations based on CD24 expression (low (lo) or high (high)): at lower levels in CD24lo, which includes stem/progenitor and myoepithelial cells and higher levels in CD24hi, which contains luminal cells. In parallel with in vitro results, the CD24lo mouse mammary epithelial cells displaying Notch activity have lower levels of p63 expression. Furthermore, deletion of RBPjk, the main mediator of Notch signaling, or the overexpression of ΔNp63 inhibited luminal cell lineage in vivo. Another important point revealed by Notch reporter mouse strain is the simultaneous activation of Notch with estrogen signaling during pubertal development. The expression of FOXA1, the mediator of estrogen receptor (ER) transcriptional activity, is correlated with Notch activation in vivo that it is lower in CD24lo than in CD24hi cells. Moreover, FOXA1 is regulated by NICD in vitro supporting the presence of a link between Notch and ER signaling. Taken together, I report that Notch signaling is involved in luminal cell fate determination and its effects are partially mediated through inhibition of ONp63. Besides, ΔNp63 is required for the maintenance and sufficient for the induction of myoepithelial phenotype in HBECs in vitro and is not compatible with luminal lineage in vivo. Based on these results, I propose a model for epithelial cell hierarchy in mammary gland, whereby there are two different types of luminal progenitors, early and late, displaying different levels of Notch activity. Notch signaling contributes to the determination of luminal cell lineage in these two progenitor steps: In "Early Luminal Progenitor" stage, it inhibits myoepithelial fate by decreasing p63 expression, and in "Late Luminal Progenitor" stage, Notch signaling is involved in induction of luminal lineage by acting on ER-FOXA1 axis. It has to be investigated further whether Notch signaling might behave as an oncogene or tumor suppressor depending on which cell type in the epithelial hierarchy it is modulated and which one is more likely to occur in different human breast cancer types. RÉSUMÉ : La glande mammaire est composée de deux types principaux de cellules: les cellules luminales, qui bordent le lumen et les cellules myoépithéliales, qui se trouvent entre la lame basale et les cellules luminales. Les mécanismes intervenant dans leur différenciation et leur maintenance demeurent encore mal compris. La protéine transmembranaire Notch est connue pour déterminer le destin des cellules dans plusieurs types de tissus comme la peau ou le système nerveux. Selon le type de tissu dans lequel se trouve Notch, il agira soit comme un suppresseur de tumeur soit comme un oncogène. A l'aide de modèles de souris surexprimant les récepteurs actifs de Notch, il a été démontré que la voie de signalisation de Notch est oncogénique au niveau de la glande mammaire. Des études descriptives et fonctionnelles dans le cadre du cancer du sein ont permis de mettre en évidence une augmentation de l'activité de Notch ou de l'expression de ces composants dans certains tissus cancéreux. Toutefois, le rôle physiologique de Notch et des mécanismes qu'il active restent méconnus. P63, une protéine membre de la famille p53, est impliquée dans la différenciation des kératinocytes. Le modèle issu de l'étude des souris p63 knockout a révélé que cette protéine est requise pour la formation des primordia mammaires chez l'embryon et que son isoforme ΔNp63 est exclusivement exprimée dans la couche myoépithéliale de la glande mammaire adulte. Dans le but de comprendre les fonctions physiologiques de Notch, je l'ai activé en exprimant le domaine intracellulaire de Notch 1 (NICD) dans des cellules épithéliales primaires de glande mammaire humaine (HBECs). Le NICD a alors réduit la croissance des HBECs et conduit à la régulation négative non seulement de p63 mais également des composants du réseau d'interaction des récepteurs de la matrice extracellulaire (ECM). En exprimant conjointement ΔNp63 et NICD, il est apparu que la réduction de croissance induite par Notch était partiellement compensée, et qu'il y avait également une augmentation des composants ECM. De plus, lorsque ΔNp63 a été inactivé dans les cellules HBECs myoépithéliales, une réduction de croissance cellulaire identique à celle provoquée par l'activation de Notch a pu être mise en évidence, de même qu'une régulation négative des marqueurs myoépithéliaux ainsi qu'une augmentation des marqueurs luminaux. Afin de compléter ces informations, l'expression de ΔNp63 a été forcée dans les HBECs luminales, ce qui a induit un phénotype myoépithélial et une diminution des marqueurs lumineux. In vivo, par l'analyse de souris ayant un gène rapporteur de l'activité de Notch, j'ai démontré que Notch est activé pendant la puberté au niveau des sites de la morphogenèse canalaire, à savoir les bourgeons terminaux. Les analyses par FACS (Fluorescence-activated cell sorting) basées sur l'expression de l'antigène CD24 ont révélé qu'il peut tre détecté dans deux populations différentes : une population qui l'exprime faiblement, qui regroupe les cellules souches/progéniteurs et les cellules myoépithéliales, et une population qui l'exprime fortement qui est composé des cellules luminales. Parallèlement aux résultats in vitro, j'ai mis en évidence un faible niveau d'expression de p63 dans les cellules épithéliales de la glande mammaire de souris, exprimant faiblement l'antigène CD24 et présentant une activité de Notch. De plus, la délétion de RBPjr~, médiateur principal de la signalisation de Notch, ainsi que la surexpression de ΔNp63 in vivo ont inhibé la lignée des cellules luminales. Un autre point important révélé par les souris rapporteur de l'activité de Notch a été l'activation simultanée de Notch et de la signalisation de l'oestrogène pendant le développement pubertaire. L'expression de FOXA1, médiateur de l'activité transcriptionnelle des récepteurs aux oestrogènes (ER), est en corrélation avec l'activation de Notch in vivo, plus basse dans les cellules avec une faible expression de l'antigène CD24 que dans celles avec une forte expression. De plus, FOXA1 est régulé par NICD in vitro confirmant la présence d'un lien entre Notch et la signalisation des ER. En résumé, la signalisation de Notch est impliquée dans la détermination du destin cellulaire des cellules luminales et ses effets sont partiellement modifiés par l'inhibition de ΔNp63. ΔNp63 est requis pour la maintenance et est suffisant pour l'induction du phénotype myoépithéliale dans les HBECs in vitro et ne peut donc pas se trouver dans les cellules luminales in vivo. Basé sur ces résultats, je propose un modèle de hiérarchisation des cellules épithéliales de la glande mammaire, dans lequel sont présents deux types de progéniteurs des cellules luminales exprimant des niveaux différents d'activité de Notch, les progéniteurs lumineux précoces et tardifs. La signalisation de Notch contribue à la différenciation de la lignée cellulaire luminale au niveau de ces deux progéniteurs : dans la forme précoce, il inhibe la différenciation des cellules myoépithéliales en réduisant l'expression de p63 et dans la forme tardive, Notch est impliqué dans l'induction de la lignée luminale en agissant sur l'axe ER-FOXA1. Il serait nécessaire d'investiguer plus loin si le fait que Notch agisse comme oncogène ou suppresseur de tumeur dépend du stade de différenciation de la cellule dans laquelle il est modulé et laquelle de ces deux fonctions il est le plus probable de rencontrer dans les différents types de cancer du sein.

Three-dimensional aspects of fluid flows in channels. I. Meniscus and thin film regimes

We study the forced displacement of a fluid-fluid interface in a three-dimensional channel formed by two parallel solid plates. Using a lattice-Boltzmann method, we study situations in which a slip velocity arises from diffusion effects near the contact line. The difference between the slip and channel velocities determines whether the interface advances as a meniscus or a thin film of fluid is left adhered to the plates. We find that this effect is controlled by the capillary and Péclet numbers. We estimate the crossover from a meniscus to a thin film and find good agreement with numerical results. The penetration regime is examined in the steady state. We find that the occupation fraction of the advancing finger relative to the channel thickness is controlled by the capillary number and the viscosity contrast between the fluids. For high viscosity contrast, lattice-Boltzmann results agree with previous results. For zero viscosity contrast, we observe remarkably narrow fingers. The shape of the finger is found to be universal.

Dynamics of driven three-dimensional thin films: from hdrophilic to superhydrophobic substrates

We study the forced displacement of a thin film of fluid in contact with vertical and inclined substrates of different wetting properties, that range from hydrophilic to hydrophobic, using the lattice-Boltzmann method. We study the stability and pattern formation of the contact line in the hydrophilic and superhydrophobic regimes, which correspond to wedge-shaped and nose-shaped fronts, respectively. We find that contact lines are considerably more stable for hydrophilic substrates and small inclination angles. The qualitative behavior of the front in the linear regime remains independent of the wetting properties of the substrate as a single dispersion relation describes the stability of both wedges and noses. Nonlinear patterns show a clear dependence on wetting properties and substrate inclination angle. The effect is quantified in terms of the pattern growth rate, which vanishes for the sawtooth pattern and is finite for the finger pattern. Sawtooth shaped patterns are observed for hydrophilic substrates and low inclination angles, while finger-shaped patterns arise for hydrophobic substrates and large inclination angles. Finger dynamics show a transient in which neighboring fingers interact, followed by a steady state where each finger grows independently.

Fibrous P.C. Concrete Overlay Research Green County, Iowa, December 1978

The Greene County, Iowa overlay project, completed in October 1973, was inspected on October 16 & 17, 1978 After five years of service The 33 fibrous concrete sections, four CRCP sections, two mesh reinforced and two plain concrete sections with doweled reinforcement were rated relative to each other on a scale of 0 t o 100. The rating was conducted by the original members of the Project Planning Committee, Iowa DOT, Iowa Counties, Federal Highway Administration, University of Illinois and industry representatives . In all , there were 23 representatives who rated this project . The 23 values were then averaged to provide a final rating number for each section. The highest panel rating (90) was assigned to the 5-inch thick , deformed barre in forced PCC sections ; an 86t o a 3-inch thick , 160 lbs. of fiber and 600 lbs . of cement on a partial bonded surface ; an 84 to the 4-inch CRC with elastic joints (bonded) and an 84 to a 4-inch mesh reinforce section. One of the major factors influencing performance appears t o be the thickness. In the fibrous concrete overlay, The greatest influences appears t o be the fiber content. Overlay Sections containing 160 1b/yd3 of Fiber are, in almost all cases , outperforming those c o n t a i n i n g 60 or 100. It is obvious at This time meth at the 3-inch thick fibrous concrete overlays are, in general, out performing the 2-inch thick sections. The performance of the fibrous concrete the overlay appears to be favorably influenced by: (1) The use of higher a spectra fiber (0.025 x 2.5 i n c h e s ) v e r s u s (0.010 x 0.022 x 1.0 inches) (2) The use of a lower cement c o n t e n t ( 600 versus 750 1b/yd3) However, The set less well defined and the improvements in overlay performance attributed to high aspect ratio fibers and low cement contents.

Development of a Model for the Ice Scraping Process Iowa Department of Transportation Project HR 361 Final Report, October 1996

A laboratory study has been conducted with two aims in mind. The first goal was to develop a description of how a cutting edge scrapes ice from the road surface. The second goal was to investigate the extent, if any, to which serrated blades were better than un-serrated or "classical" blades at ice removal. The tests were conducted in the Ice Research Laboratory at the Iowa Institute of Hydraulic Research of the University of Iowa. A specialized testing machine, with a hydraulic ram capable of attaining scraping velocities of up to 30 m.p.h. was used in the testing. In order to determine the ice scraping process, the effects of scraping velocity, ice thickness, and blade geometry on the ice scraping forces were determined. Higher ice thickness lead to greater ice chipping (as opposed to pulverization at lower thicknesses) and thus lower loads. S~milabr ehavior was observed at higher velocities. The study of blade geometry included the effect of rake angle, clearance angle, and flat width. The latter were found to be particularly important in developing a clear picture of the scraping process. As clearance angle decreases and flat width increases, the scraping loads show a marked increase, due to the need to re-compress pulverized ice fragments. The effect of serrations was to decrease the scraping forces. However, for the coarsest serrated blades (with the widest teeth and gaps) the quantity of ice removed was significantly less than for a classical blade. Finer serrations appear to be able to match the ice removal of classical blades at lower scraping loads. Thus, one of the recommendations of this study is to examine the use of serrated blades in the field. Preliminary work (by Nixon and Potter, 1996) suggests such work will be fruitful. A second and perhaps more challenging result of the study is that chipping of ice is more preferable to pulverization of the ice. How such chipping can be forced to occur is at present an open question.

Sniff nasal inspiratory pressure in patients with chronic obstructive pulmonary disease.

In subjects with normal lung mechanics, inspiratory muscle strength can be reliably and easily assessed by the sniff nasal inspiratory pressure (SNIP), which is the pressure measured in an occluded nostril during a maximal sniff performed through the contralateral nostril. The aim of this study was to assess the validity of the SNIP in patients with chronic obstructive pulmonary disease (COPD), where pressure transmission from alveoli to upper airways is likely to be dampened. Twenty eight patients with COPD were studied (mean forced expiratory volume in one second (FEV1) = 36% of predicted). The SNIP and the sniff oesophageal pressure (sniff Poes) were measured simultaneously during maximal sniffs, and were compared to the maximal inspiratory pressure obtained against an occlusion (MIP). All measurements were performed from functional residual capacity in the sitting position. The ratio SNIP/sniff Poes was 0.80, and did not correlate with the degree of airflow limitation. The ratio MIP/sniff Poes was 0.87, and the ratio SNIP/MIP was 0.97. Inspiratory muscle weakness, as defined by a low sniff Poes, was present in 17 of the 28 patients. A false diagnosis of weakness was made in eight patients when MIP was considered alone, in four when SNIP was considered alone, and in only three patients when MIP and SNIP were combined. We conclude that both the sniff nasal inspiratory pressure and the maximal inspiratory pressure moderately underestimate sniff oesophageal pressure in chronic obstructive pulmonary disease. Although suboptimal in this condition, the sniff nasal inspiratory pressure appears useful to complement the maximal inspiratory pressure for assessing inspiratory muscle strength in patients with chronic obstructive pulmonary disease.

Iowa College Student Aid Commission Annual Report FY 2010

Fiscal Year 2010 proved to be a year of many challenges. While the nation and the state dealt with an unprecedented economic downturn, a growing number of Iowa families sought assistance to pay higher education costs. The year saw Iowa’s unemployment rate soar to a 23-year high, contributing to a 22 percent increase in enrollment at Iowa’s colleges and universities. An increasing number of Iowans applied for financial aid to pay for college as evidenced by a 47 percent increase in the number of Free Applications for Federal Student Aid (FAFSA) completed over the past 5 years. The economic downturn also forced the State to make a 10 percent reduction in all general fund appropriations which reduced the total amount of state-funded financial aid available to assist families.